Copper and Zinc Levels in Commercial Marine Fish from Setiu, East Coast of Peninsular Malaysia

Unveiling the nutritional value and potentially toxic elements in fish species from Miliç Wetland, Türkiye: A probabilistic human health risk assessment using Monte Carlo simulation

This study evaluates the nutritional value and health risks of fish from Miliç Wetland, Türkiye, focusing on potentially toxic elements (PTEs) in Esox lucius, Squalius cephalus, and Carassius gibelio. Using ICP-MS, mean PTE concentrations were determined, including Zn (4979 μg/kg), Fe (4241 μg/kg), and As (125 μg/kg). Macro elements like K, P, and Ca were also assessed for nutritional profiling. A Monte Carlo-based risk assessment confirmed that PTE levels were below safety limits, indicating safe consumption. Chemometric techniques (PCA, PCC, HCA) helped trace contamination sources, identifying residential, agricultural, and lithogenic inputs. Esox lucius showed the highest essential nutrient levels. This research highlights the importance of combining chemometric analysis with regular monitoring for food safety and public health protection.

Evaluation of the toxic metals, proximate composition and length-weight relationships of selected fish species from the Gadananathi River, Southern Tamil Nadu

The present study reveals toxic metals, proximate composition, and growth conditions in seven fish species, aiding their nutritional importance and conditions. The samples of seven different small indigenous fish species, including Xenentodon cancila, Glossogobious giuris, Pseudambassis ranga, Puntius dorsolis, Mystus vittatus, Dawkinsia filamentosa, and Dawkinsia tambraparaniei, were collected in river Gadananathi, Tamilnadu, India. A total 14 fish samples were analyzed for lead, cadmium, and copper using atomic absorption spectrometry. The standard procedures were used to determine the length-weight and proximate composition of the seven fishes. The findings revealed that the seven fish species had variable amounts of metal buildup. Cu levels were highest in D. tambraparniei gills and lowest in M. vittatus gills and livers; nonetheless, substantial amounts of Cu were found in P. dorsalis livers. In the length-weight correlations of the regression parameters of coefficient value r2, the "a" and "b" values revealed a positive allometric growth rate in all fish species except G. giuris and M. vittatus. However, X. cancila had the highest composition in the proximate analysis, while D. tambraparniei and D. filamentosa had the highest protein content mean value at a significant level (P ≤ 0.05). Overall, discrepancies in nutritional content might be related to species, environmental circumstances, fish age and size, and food availability.

Accumulation of potentially toxic elements in fourfinger threadfin (Eleutheronema tetradactylum) and black pomfret (Parastromateus niger) from Selangor, Malaysia

The accumulation of potentially toxic elements (PTEs) has raised public awareness due to harmful contamination to both human and marine creatures. This study was designed to determine the concentration of copper (Cu), zinc (Zn), cadmium (Cd), and nickel (Ni) in the intestine, kidney, muscle, gill, and liver tissues of local commercial edible fish, fourfinger threadfin (Eleutheronema tetradactylum), and black pomfret (Parastromateus niger) collected from Morib (M) and Kuala Selangor (KS). Among the studied PTEs, Cu and Zn were essential elements to regulate body metabolism with certain dosages required while Cd and Ni were considered as non-essential elements that posed chronic and carcinogenic risk. The concentration of PTEs in fish tissue samples was analyzed using flame atomic absorption spectrometry (F-AAS). By comparing the concentration of PTEs in fish tissues as a bioindicator, the environmental risk of Morib was more serious than Kuala Selangor because both fish species collected from Morib resulted in a higher PTEs concentration. For an average 62 kg adult with a fish ingestion rate (FIR) of 0.16 kg/person/day in Malaysia, the estimated weekly intake (EWI) of Cd from the consumption of E. tetradactylum (M: 0.0135 mg/kg; KS: 0.0134 mg/kg) and P. niger (M: 0.0140 mg/kg; KS: 0.0132 mg/kg) had exceeded the provisional tolerable weekly intake (Cd: 0.007 mg/kg) established by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) and oral reference dose (ORD) values of Cd (0.001 mg/kg/day) as provided by the United States Environmental Protection Agency (USEPA) regional screening level, thus it posed chronic risks for daily basis consumption. Besides, the value of the carcinogenic risk of Cd (0.7-3 to 0.8-3) and Ni (0.5-3 to 0.6-3) were in between the acceptable range (10-6 to 10-4) of the health index that indicates a relatively low possibility cancer occurrence to the consumers in both Morib and Kuala Selangor. This study recommended FIR to be 0.80 kg/person/day to reduce the possibility of posing chronic and carcinogenic risks while at the same time obtaining the essential nutrients from the fish.

Bioaccumulation of trace metal ions in the blue swimmer crab tissues Portunus pelagicus (Linnaeus, 1758) in Bahrain, Arabian Gulf

The blue swimmer crab, Portunus pelagicus, is an edible abundant crustacean found in many seas around the world, including the Arabian Gulf. In this study, the concentrations of six metal ions in the white and brown meats of P. pelagicus from four sites in Bahrain were determined. P. pelagicus was found to accumulate Zn2+ and Cu2+ higher than other metal ions in the order of Zn2+ > Cu2+ > Cd2+ > Ni2+ > Cr3+, while Pb2+ was not detected. The overall average concentrations of Zn2+, Cu2+, Cr3+, Ni2+, and Cd2+ in white meat were 236.2, 69.5, 0.109, 0.159, and 0.273 mg/kg, while in brown meat, they were 235.4, 199.2, 0.133, 1.25, and 4.87 mg/kg based on dry weight, respectively. Concentrations of Pb2+ and Cd2+ were safe according to Bahrain's and European Commission guidelines. The estimated weekly intake (EWI) values of Zn2+, Cu2+, Pb2+, and Cd2+ via consumption of crab's white meat (edible tissue) were 102.1, 30.1, 0.042, and 0.12 µg/kg/week, respectively, which are far lower than the maximum recommended values established by the FAO/WHO. The hazard quotient (HQ) values of individual trace metal ions and the synergistic effects of total trace metal ion (hazard index) were below 1, indicating that there is no potential health risk on the consumption of crab edible tissues (white meat). However, elevated levels of Cd2+ (0.05-1.73 mg/kg wet weight) in the brown meat (hepatopancreas) were detected. The female P. pelagicus accumulated high levels of Zn2+ and Cu2+ in the white meat, as well as Cu2+ in the brown meat compared to males. Additionally, it was found that Cu2+ and Cd2+ were significantly higher (p < 0.05) in brown meat compared to white meat. Higher concentrations (p < 0.05) of Zn2+, Cu2+, and Cd2+ were observed in crabs collected from sites that have harsher environmental conditions.

Evaluation of microplastic contamination by metals in a controlled environment: A risk to be considered

The metal contamination and the degradation of polyethylene terephthalate (PET) due to human activities have contributed to the worsening of environmental problems in aquatic systems. Therefore, the study aimed to evaluate PET microplastic adsorption levels when exposed to high amounts of Ni, Cu and Co. The PET microplastic was characterized by scanning electron microscopy, Brunner-Emmet-Teller, porosimetry system, Barrett-Joyner-Halenda and Fourier transform infrared spectroscopy with attenuated total reflectance for evaluation of surface morphology, surface area, porosity, pore size and functional groups, respectively. The results showed that the surface area, the presence of macro and mesopores, and the functional groups influence the adsorption of metals on the surface of PET microplastic. The adsorption isotherms confirmed the presence of mesoporosity and macroporosity on the PET microplastic surface. The Freundlich and Langmuir models were used to study the adsorption capacity. The kinetics of adsorptions were interpreted using pseudo-first order and pseudo-second order models. The results indicated that the Langmuir isotherm and the pseudo-second order adequately described the adsorption of metals by the PET microplastic. The removal rates by the PET microplastic varied from 8 to 34% for Ni, 5 to 40% for Cu and 7 to 27% for Co after a period of 5 days. Furthermore, the adsorption was predominantly chemical and extremely fast, indicating that the presence of microplastics in the environment can lead to a rapid metal accumulation which elevates the hazards potential of microplastic in living beings.

Correction: Yap, C.K.; Al-Mutairi, K.A. Copper and Zinc Levels in Commercial Marine Fish from Setiu, East Coast of Peninsular Malaysia. Toxics 2022, 10, 52

The published article [...].

Latent Benefits and Toxicity Risks Transmission Chain of High Dietary Copper along the Livestock-Environment-Plant-Human Health Axis and Microbial Homeostasis: A Review

The extensive use of high-concentration copper (Cu) in feed additives, fertilizers, pesticides, and nanoparticles (NPs) inevitably causes significant pollution in the ecological environment. This type of chain pollution begins with animal husbandry: first, Cu accumulation in animals poisons them; second, high Cu enters the soil and water sources with the feces and urine to cause toxicity, which may further lead to crop and plant pollution; third, this process ultimately endangers human health through consumption of livestock products, aquatic foods, plants, and even drinking water. High Cu potentially alters the antibiotic resistance of soil and water sources and further aggravates human disease risks. Thus, it is necessary to formulate reasonable Cu emission regulations because the benefits of Cu for livestock and plants cannot be ignored. The present review evaluates the potential hazards and benefits of high Cu in livestock, the environment, the plant industry, and human health. We also discuss aspects related to bacterial and fungal resistance and homeostasis and perspectives on the application of Cu-NPs and microbial high-Cu removal technology to reduce the spread of toxicity risks to humans.