Mineralogical Properties of a Refractory Tantalum-Niobium Slag and the Effect of Roasting on the Leaching of Uranium-Thorium

Hydrometallurgical assessment of oxides of Nb, Ta, Th and U from Ethiopian tantalite ore

Tantalite ore is the main source of the metals niobium (Nb) and tantalum (Ta). Today, the needs for these economic and irreplaceable Nb, and Ta metals are becoming imperative for the technological world, to meet the demand, a lot of research is needed to ore reserves, extraction methodology and simplified refining processes should be in plethora. This study focuses on the Ethiopian tantalite ore located south of the Neoproterozoic Adola belt of the rare element Kenticha pegmatite deposit (global source of tantalite). Successive beneficiation of pegmatite ore results in a highest dissolution of 60.83 wt% of Ta2O5 with 4.58 wt% of Nb2O5 including the removal of U, Th, Ti, Fe and Si, resulting in a percentage low weight, which allows transporting ore concentrates. The concentrated ore is leached with a mixture of binary acids HF and H2SO4 with 6:1 ratio at temperatures from 100 to 400 °C. The filtered solution was extracted with MIBK then, precipitated with ammonium solution. The hydrometallurgy of Nb and Ta oxides is affected by leaching temperature and the presence of radioactive oxides of U and Th. Elemental analysis and surface topography were studied using SEM/EDS, revealing the highest percentage composition of Nb and Ta oxides at 200 °C of leaching temperature. Comparatively, the compositions of U and Th showed higher amounts at the leaching temperatures of 150 and 200 °C, and when the temperature reached about 350 and 400 °C, the percentage composition of U and Th became very low, the economic metals Nb and Ta were completely leached. The stability of the precipitated samples was analyzed using TGA-DTA and found to be thermally stable, and not contain significant moisture at each temperature studied. Studies for recovery of Ta, Nb, U and Th from Kenticha tantalite are required.

Simultaneously Recovery of Thorium and Tungsten through Hybrid Electrolysis-Nanofiltration Processes

The recovery and recycling of metals that generate toxic ions in the environment is of particular importance, especially when these are tungsten and, in particular, thorium. The radioactive element thorium has unexpectedly accessible domestic applications (filaments of light bulbs and electronic tubes, welding electrodes, and working alloys containing aluminum and magnesium), which lead to its appearance in electrical and electronic waste from municipal waste management platforms. The current paper proposes the simultaneous recovery of waste containing tungsten and thorium from welding electrodes. Simultaneous recovery is achieved by applying a hybrid membrane electrolysis technology coupled with nanofiltration. An electrolysis cell with sulphonated polyether-ether-ketone membranes (sPEEK) and a nanofiltration module with chitosan-polypropylene membranes (C-PHF-M) are used to carry out the hybrid process. The analysis of welding electrodes led to a composition of W (tungsten) 89.4%; Th 7.1%; O2 2.5%; and Al 1.1%. Thus, the parameters of the electrolysis process were chosen according to the speciation of the three metals suggested by the superimposed Pourbaix diagrams. At a constant potential of 20.0 V and an electrolysis current of 1.0 A, the pH is varied and the possible composition of the solution in the anodic workspace is analyzed. Favorable conditions for both electrolysis and nanofiltration were obtained at pH from 6 to 9, when the soluble tungstate ion, the aluminum hydroxide, and solid thorium dioxide were formed. Through the first nanofiltration, the tungstate ion is obtained in the permeate, and thorium dioxide and aluminum hydroxide in the concentrate. By adding a pH 13 solution over the two precipitates, the aluminum is solubilized as sodium aluminate, which will be found after the second nanofiltration in the permeate, with the thorium dioxide remaining integrally (within an error of ±0.1 ppm) on the C-PHF-M membrane.

Novel Adsorbents and Adsorption Methods for Pollutant Removal

Over the past few decades, with the rapid growth of the global population and economy, the increasing levels of various pollutants such as heavy metals, radionuclides, and organic/inorganic/biological toxins from various industries and human activities, which diffuse into aspects of the environment such as the atmosphere, soil, and natural water, have posed a serious threat to human health and the environment [...].