Assessment of Excess Sludge Ultrasonic, Mechanical and Hybrid Pretreatment in Relation to the Energy Parameters

Pulsed electric field: An emerging pretreatment technology in a biogas production

This review focuses on current status of pulsed electric field (PEF) technology and its implementation in biogas production. First, basic principles of PEF and a schematic overview of typical PEF processing system were provided. Thereafter, lab- and pilot-scale PEF pretreatments of sludge with subsequent anaerobic digestion (AD) were provided. Furthermore, PEF technology, as an emerging technology for the lignocellulose (LC) pretreatment in biogas production which is still predominantly used at lab-scale, was outlined. Eventually, conclusion together with future perspectives and challenges were outlined.

Review on pulp and paper activated sludge pretreatment, inhibitory effects and detoxification strategies for biovalorization

Biovalorization of pulp and paper activated sludge to value-added products could be an effective alternative to traditional sludge management methods, which tend to pose serious environmental issues. Since pulp and paper activated sludge consists of microbial biomass, cellulose, hemicellulose and lignin and thus, could be subjected to different hydrolysis methods to solubilize sludge solids and release simple sugars to form value-added products by the microbial fermentation process. Hence, different sludge hydrolysis methods have been summarized in this review paper. However, hydrolysis of lignocellulosic materials generates variety of toxic compounds during hydrolysis and causes detrimental effects. Therefore, different toxic compounds and their impact on microorganisms, cellulolytic enzymes and fermentation process have been discussed in detail and recent strategies to counteract the problems of inhibitors have also been briefly explained.

Enhanced Degradation of Waste Activated Sludge in Microbial Electrolysis Cell by Ultrasonic Treatment

This study investigates the feasibility of ultrasonic pretreatment for improving treatment efficiency of waste activated sludge (WAS) in microbial electrolysis cell (MEC). Results showed that at applied voltage of 0.5 V, biogas production and cathodic hydrogen recovery enhanced 3.68-fold and 2.56-fold, respectively. Due to the transformation of soluble COD accelerated by the pretreatment, the removal rates of suspended solids and volatile suspended solids were significantly enhanced by 1.38-fold and 1.48-fold, respectively. Various kinds of organics, including VFAs (volatile fatty acids), proteins and carbohydrates, could be utilized in sequence. The primary biodegradable substance in MEC was hydrophilic fraction from sludge organics and the pretreatment effectively resulted in an elevated concentration of this fraction. The 16S rRNA pyrosequencing analysis demonstrated multiple syntrophic interactions between fermentative bacteria, exoelectrogenes, and methanogenic archaea in MEC for WAS.

The Effects of Ultrasonic Disintegration as a Function of Waste Activated Sludge Characteristics and Technical Conditions of Conducting the Process-Comprehensive Analysis

A comprehensive analysis of the effects obtained in the process of ultrasonic disintegration (UD) of waste activated sludge (WAS), was conducted. Sludge samples were collected periodically from Central Wastewater Treatment Plant (WWTP) in Gliwice (Poland) and disintegrated in the two ultrasonic devices of different construction and technical parameters, i.e., WK-2010 (A) and ultrasonic washer (B). The experiments were performed under a constant energy supply per sludge volume E_V = 160 kWh·m⁻³. The direct and technological effects, i.e., after UD and anaerobic digestion (AD) were investigated, respectively. Statistical analysis showed that characteristics and parameters of the WAS, which affects the magnitude of the direct effects create the following sequence: TS (total solids), VS (volatile solids), ΔT (temperature increase) > EPS (extracellular polymeric substances) > SCOD (soluble chemical oxygen demand) > CST (capillary suction time) > N_{TOT (}total nitrogen), P_TOT (total phosphorus) > pH. Whereas, in the case of technological effects, the above sequence was as follows: TS, VS > CST > N_TOT, P_TOT > pH. Ultrasonic disintegration of WAS prior to AD increased total biogas production (from 13.0% to 19.7%) and reduced the content of TS (from 4.1% to 8.2%) and VS (5.8% to 9.5%) in comparison to the control sample. This confirms the usefulness of ultrasonic disintegration as an effective method of sludge digestion intensification. The obtained results showed that changes in the characteristics of WAS have a significant impact on the magnitude of the effects of ultrasonic disintegration, especially TS, VS, ΔT, EPS, SCOD and CST. Concluding, it can be inferred that the most promising conditions for ultrasonic pretreatment conducted under constant energy supply per sludge volume, are: low power, long sonication time, large surface area of the emitter, and high increase of sludge temperature while conducting the process.