Greener Method for the Removal of Toxic Metal Ions from the Wastewater by Application of Agricultural Waste as an Adsorbent

Potassium permanganate-modified eggshell biosorbent for the removal of diclofenac from liquid environment: adsorption performance, isotherm, kinetic, and thermodynamic analyses

This study assess how well diclofenac (DCF) can be separated from aqueous solution using potassium permanganate-modified eggshell biosorbent (MEB). The MEB produced was characterised using XRD, FTIR, and SEM. Batch experiments were conducted to examine and assess the impact of contact time, adsorbent dosage, initial concentration, and temperature on the adsorption capacity of the MEB in the DCF sequestration. The best parameters to obtained 95.64% DCF removal from liquid environment were 0.05 g MEB weight, 50 mg/L initial concentration, and 60 min contact time at room temperature. The maximum DCF sequestration capacity was found to be 159.57 mg/g with 0.05 g of MEB at 298 K. The adsorption isotherm data were more accurately predicted by the Freundlich model, indicating a process of heterogeneous multilayer adsorption. The results of the kinetic study indicated that the pseudo-second-order kinetic models best matched the experimental data. The findings revealed that the dynamic of DCF entrapment is largely chemisorption and diffusion controlled. Based on the values of thermodynamic parameters, the process is both spontaneous and endothermic. The primary processes of DCF sorption mechanism onto the MEB were chemical surface complexation, hydrogen bonding, π-π stacking, and electrostatic interactions. The produced MEB showed effective DCF separation from the aqueous solution and continued to have maximal adsorption capability even after five regeneration cycles. These findings suggest that MEB could be highly efficient adsorbent for the removal of DCF from pharmaceutical wastewater.

A review on adsorption of heavy metals from wastewater using carbon nanotube and graphene-based nanomaterials

The rampant rise in world population, industrialization, and urbanization expedite the contamination of water sources. The presence of the non-biodegradable character of heavy metals in waterways badly affects the ecological balance. In this modern era, the unavailability of getting clear water as well as the downturn in water quality is a major concern. Therefore, the effective removal of heavy metals has become much more important than before. In recent years, the attention to better wastewater remediation was directed towards adsorption techniques with novel adsorbents such as carbon nanomaterials. This review paper primarily emphasizes the fundamental concepts, structures, and unique surface properties of novel adsorbents, the harmful effects of various heavy metals, and the adsorption mechanism. This review will give an insight into the current status of research in the realm of sustainable wastewater treatment, applications of carbon nanomaterials, different types of functionalized carbon nanotubes, graphene, graphene oxide, and their adsorption capacity. The importance of MD simulations and density functional theory (DFT) in the elimination of heavy metals from aqueous media is also discussed. In addition to that, the effect of factors on heavy metal adsorption such as electric field and pressure is addressed.

Agricultural Solid Wastes Based Adsorbent Materials in the Remediation of Heavy Metal Ions from Water and Wastewater by Adsorption: A Review

Adsorption has become the most popular and effective separation technique that is used across the water and wastewater treatment industries. However, the present research direction is focused on the development of various solid waste-based adsorbents as an alternative to costly commercial activated carbon adsorbents, which make the adsorptive separation process more effective, and on popularising the sustainable options for the remediation of pollutants. Therefore, there are a large number of reported results available on the application of raw or treated agricultural biomass-based alternatives as effective adsorbents for aqueous-phase heavy metal ion removal in batch adsorption studies. The goal of this review article was to provide a comprehensive compilation of scattered literature information and an up-to-date overview of the development of the current state of knowledge, based on various batch adsorption research papers that utilised a wide range of raw, modified, and treated agricultural solid waste biomass-based adsorbents for the adsorptive removal of aqueous-phase heavy metal ions. Metal ion pollution and its source, toxicity effects, and treatment technologies, mainly via adsorption, have been reviewed here in detail. Emphasis has been placed on the removal of heavy metal ions using a wide range of agricultural by-product-based adsorbents under various physicochemical process conditions. Information available in the literature on various important influential physicochemical process parameters, such as the metal concentration, agricultural solid waste adsorbent dose, solution pH, and solution temperature, and importantly, the adsorbent characteristics of metal ion removal, have been reviewed and critically analysed here. Finally, from the literature reviewed, future perspectives and conclusions were presented, and a few future research directions have been proposed.

Insights into the Synergistic Removal of Copper(II), Cadmium(II), and Chromium(III) Ions Using Modified Chitosan Based on Schiff Bases-g-poly(acrylonitrile)

Chitosan has received broad consideration as an adsorbent for all pollutants because of its low cost and great adsorption potential. However, its shortcomings, including sensitivity to pH, poor thermal stability, and poor mechanical strength, limit its use. The functional groups of chitosan can be modified to enhance its performance by the grafting technique and Schiff base modification. The grafting process used acrylonitrile (Ch-g-PAN) as a monomer and potassium persulfate as an initiator. After that, the modification via preparation of the Schiff base reaction using salicylaldehyde (Ch-g-Sch I) and P-anisaldehyde (Ch-g-Sch II) was carried out. The synthesized copolymers were detailed and characterized through several spectroscopic and microscopic techniques including infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. In addition, Ch-g-Sch I and Ch-g-Sch II were applied in the removal of different metal ions such as Cu²⁺, Cd²⁺, and Cr³⁺. The maximum adsorption capacity of Ch-g-Sch I for Cd²⁺ was 183.7 mg g^-1 in 24 h, while in the case of Ch-g-Sch II, the maximum adsorption capacity for Cd²⁺ was improved to 322.9 mg g^-1 for the same time. Moreover, adsorption thermodynamic analysis displays that the all ion adsorption process was not random and the pseudo-second-order model fitted with experimental results. Finally, Ch-g-Sch I and Ch-g-Sch II were applied as designs for industrial wastewater treatment with significant efficiency.

Response surface optimization and modeling in heavy metal removal from wastewater-a critical review

The existence of hazardous heavy metals in aquatic settings causes health risks to humans, prompting researchers to devise effective methods for removing these pollutants from drinking water and wastewater. To obtain optimum removal efficiencies and sorption capacities of the contaminants on the sorbent materials, it is normally necessary to optimize the purification technology to attain the optimum value of the independent process variables. This review discusses the most current advancements in using various adsorbents for heavy metal remediation, as well as the modeling and optimization of the adsorption process independent factors by response surface methodology. The remarkable efficiency of the response surface methodology for the extraction of the various heavy metal ions from aqueous systems by various types of adsorbents is confirmed in this critical review. For the first time, this review also identifies several gaps in the optimization of adsorption process factors that need to be addressed. The comprehensive analysis and conclusions in this review should also be useful to industry players, engineers, environmentalists, scientists, and other motivated researchers interested in the use of the various adsorbents and optimization methods or tools in environmental pollution cleanup.

Nanomaterials for the Treatment of Heavy Metal Contaminated Water

Nanotechnology finds its application almost in every field of science and technology. At the same time, it also helps to find the solution to various environment-related problems, especially water contamination. Nanomaterials have many advantages over conventional materials, such as high surface area, both polar and non-polar chemistries, controlled and size-tunable, easier biodegradation, which made them ideal candidates for water and environmental remediation as well. Herein, applications of non-carbon nanomaterials, such as layered double hydroxides, iron oxide magnetite nanoparticles, nano-polymer composites, metal oxide nanomaterials and nanomembranes/fibers in heavy metal contaminated water and environmental remediation are reviewed. These non-carbon nanomaterials, due to their tunable unique chemistry and small size have greater potentials for water and environmental remediation applications.

A review on adsorptive separation of toxic metals from aquatic system using biochar produced from agro-waste

Water is a basic and significant asset for living beings. Water assets are progressively diminishing due to huge populace development, industrial activities, urbanization and rural exercises. Few heavy metals include zinc, copper, lead, nickel, cadmium and so forth can easily transfer into the water system either direct or indirect activities of electroplating, mining, tannery, painting, fertilizer industries and so forth. The different treatment techniques have been utilized to eliminate the heavy metals from aquatic system, which includes coagulation/flocculation, precipitation, membrane filtration, oxidation, flotation, ion exchange, photo catalysis and adsorption. The adsorption technique is a better option than other techniques because it can eliminate heavy metals even at lower metal ions concentration, simplicity and better regeneration behavior. Agricultural wastes are low-cost biosorbent and typically containing cellulose have the ability to absorb a variety of contaminants. It is important to note that almost all agro wastes are no longer used in their original form but are instead processed in a variety of techniques to improve the adsorption capacity of the substance. The wide range of adsorption capacities for agro waste materials were observed and almost more than 99% removal of toxic pollutants from aquatic systems were achieved using modified agro-waste materials. The present review aims at the water pollution due to heavy metals, as well as various heavy metal removal treatment procedures. The primary objectives of this research is to include an overview of adsorption and various agriculture based adsorbents and its comparison in heavy metal removal.

Functionalized Activated Carbon Derived from Palm Kernel Shells for the Treatment of Simulated Heavy Metal-Contaminated Water

Heavy metal contamination in water poses a great risk to human health as well as to the lives of other creatures. Activated carbon is a useful material to be applied for the treatment of heavy metal-contaminated water. In this study, functionalized activated carbon (FAC) was produced by the induction of nitro groups onto activated carbon using nitric acid. The resulting material was characterized in detail using the XRD, Raman, BET, FTIR, and FESEM techniques. The FAC was used for the treatment of heavy metal-contaminated water using different adsorption parameters, i.e., solution pH, contact time, adsorbent dosage and heavy metal ion concentrations, and these parameters were systematically optimized. It was found that FAC requires 90 min for the maximum adsorption of the heavy metal ions; Cr6+, Pb2+, Zn2+ and Cd2+. The kinetic study revealed that the metal ion adsorption follows the pseudo-second-order. The Freundlich and Langmuir isotherms were applied to determine the best fitting adsorption isotherm models. The adsorption capacities were also determined for each metal ion.

Dynamics modeling of multicomponent metal ions' removal onto low-cost buckwheat hulls

The process of adsorption from water solutions containing a ternary system of Cu (II), Zn (II), and Ni (II) ions onto buckwheat hulls as a biosorbent was considered. The sorption capacity for buckwheat hulls was determined in sorption equilibrium batch experiments. The sorption kinetics equation corresponding to the mechanism of metal ions with the adsorbent was assumed. A new method for modeling sorption in a packed column was presented. A system of partial differential equations describing the mass balance, due to the assumption of a properly defined variable, was transformed into a system of ordinary nonlinear equations, which enables the identification of object parameters. The sorption capacity of the sorbent, sorption isotherms, and kinetics equations were used in dynamics modeling.

Design and characterization of PANI/starch/Fe2O3 bio composite for wastewater remediation

A new synthesized polyaniline/starch/hematite bio composite (PANI/S/Fe₂O₃ BC) has been studied as an effective material for on-site water remediation. PANI/S/Fe₂O₃ BC was developed by combining the techniques of co-precipitation and interfacial polymerization in the presence of aqueous starch solution in an acidic medium under ultrasonic irradiation. The nano-morphologies and structures of the designed PANI/S/Fe₂O₃ BC were evaluated by various techniques relative to PANI and Fe₂O₃ nanoparticles. In single and multiple systems, PANI/S/Fe₂O₃ BC was evaluated as a possible adsorbent for different heavy metals, including As³⁺, Zn²⁺, and Co²⁺, relative to PANI and Fe₂O₃ nanoparticles. In terms of pH value, operating temperature, initial heavy metal concentration, contact time, adsorbent dose and competitive ions in the solutions, the adsorption process was optimized. For 92% overall adsorption of Co²⁺ and 100% overall adsorption of both As³⁺ and Zn²⁺, the adsorption equilibrium was achieved within 60 and 120 min, respectively. In addition, adsorption thermodynamic analysis shows that the As³⁺ ions adsorption process was not random and the pseudo-second-order fitted with experimental results. Moreover, PANI/S/Fe₂O₃ BC was evaluated as an antibacterial agent against Gram-negative bacteria (Salmonella typhimurium) and Gram-positive bacteria (S. aureus, Methicillin-Resistant Staphylococcus, Aureus Clinical isolate and Bacillus subtilis). The reported performances indicated that the PANI/S/Fe₂O₃ BC is a potent candidate for industrial water bioremediation.

Use of Lignite as a Low-Cost Material for Cadmium and Copper Removal from Aqueous Solutions: Assessment of Adsorption Characteristics and Exploration of Involved Mechanisms

Lignite, as an available and low-cost material, was tested for cadmium (Cd) and copper (Cu) removal from aqueous solutions under various static experimental conditions. Experimental results showed that the removal efficiency of both metals was improved by increasing their initial concentrations, adsorbent dosage and aqueous pH values. The adsorption kinetic was very rapid for Cd since about 78% of the totally adsorbed amounts were removed after a contact time of only 1 min. For Cd and Cu, the kinetic and isothermal data were well fitted with pseudo-second order and Freundlich models, respectively, which suggests that Cd/Cu removal by lignite occurs heterogeneously on multilayers surfaces. The maximum Langmuir’s adsorption capacities of Cd and Cu were assessed to 38.0 and 21.4 mg g−1 and are relatively important compared to some other lignites and raw natural materials. Results of proximate, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), Fourier transform infrared spectroscopy (FTIR) and X-Ray diffraction (XRD) showed that the removal of these metals occurs most likely through a combination of cation exchange and complexation with specific functional groups. The relatively high adsorption capacity of the used lignite promotes its future use as a low cost material for Cd and Cu removal from effluents, and possibly for other heavy metals or groups of pollutants.

A Biosorption-Pyrolysis Process for Removal of Pb from Aqueous Solution and Subsequent Immobilization of Pb in the Char

The application of biosorption in the removal of heavy metals from water faces a challenge of safe disposal of contaminated biomass. In this study, a potential solution for this problem was proposed by using a biosorption-pyrolysis process featured by pretreatment of biomass with phosphoric acid (PA). The PA pretreatment of biomass increased the removal efficiency of heavy metal Pb from water by sorption, and subsequent pyrolysis helped immobilize Pb in the residual char. The results indicate that most (>95%) of the Pb adsorbed by the PA-pretreated biomass was retained in the char, and that the lower pyrolysis temperature (350 °C) is more favorable for Pb immobilization. In this way, the bioavailable Pb in the char was hardly detected, while the Pb leachable in acidic solution decreased to <3% of total Pb in the char. However, higher pyrolysis temperature (450 °C) is unfavorable for Pb immobilization, as both the leachable and bioavailable Pb increased to >28%. The reason should be related to the formation of elemental Pb and unstable Pb compounds during pyrolysis at 450 °C, according to the X-ray diffraction study.

Ecofriendly Approach for Treatment of Heavy-Metal-Contaminated Water Using Activated Carbon of Kernel Shell of Oil Palm

Heavy metal ion contamination in water poses a significant risk to human health as well as to the environment. Millions of tons of agricultural wastes are produced from oil palm plantations which are challenging to manage. In this study, we converted palm kernel shells (PKS) from a palm oil plantation into activated carbon (AC) having a surface area of 1099 m²/g using phosphoric acid as an activator. The prepared material was characterized using BET, XRD, Raman, FESEM and FTIR analyses. The AC was applied for the treatment of heavy-metal-contaminated water, and different parameters; the pH, adsorbent dosage, contact time and metal ion concentrations were varied to determine the optimal conditions for the metal ion adsorption. Different kinetic models; the zeroth, first-order and second-order, and Freundlich and Langmuir isotherm models were used to determine the mechanism of metal ion adsorption by the AC. Under the optimized conditions, Cr⁶⁺ and Pb²⁺ were removed completely, while Zn²⁺ and Cd²⁺ were more than 80% removed. This is a greener approach in which an agricultural waste, PKS is converted into a useful product, activated carbon and subsequently applied for the treatment of heavy metal-contaminated water.

CR(VI) phytoremediation by hairy roots of Brassica napus: assessing efficiency, mechanisms involved, and post-removal toxicity

Industrial activities such as leather tanning involve the use of highly toxic inorganic pollutants, like Chromium (Cr). This work evaluated Cr(VI) remediation by hairy roots (HR) of Brassica napus, paying close attention to the mechanisms involved and the toxicity of post-removal solutions. Results showed that these roots were capable of tolerating concentrations of up to 10 mg L^-1 Cr(VI), while higher concentrations were toxic for HR development. Removal efficiency was assessed through the use of synthetic solutions containing different initial Cr(VI) concentrations (2, 5, or 10 mg L^-1). Regardless of these initial concentrations, the highest removal efficiency values were between 80 and 90% after 24 and 48 h of treatment, using a 2.0 g inoculum. The mechanisms involved were Cr accumulation (60%) and to a lesser extent, adsorption to the root biomass (30%). A fraction of Cr(VI) was intracellularly reduced to Cr(III), which suggests reductases may have played a role. Additionally, post-removal toxicity was evaluated through two bioassays (Lactuca sativa L. and AMPHITOX test) after the removal of 10 mg L^-1 Cr(VI). The treated solutions showed moderate phytotoxicity for L. sativa L. and no toxicity for R arenarum. The ability of HR to remove 10 mg L^-1 Cr(VI) from real tannery effluents collected from a regional industry (Córdoba province, Argentina) was also determined. The high removal efficiency observed (98%) demonstrates this system can be successful in treating complex wastewaters.

Palm Kernel Shell as an effective adsorbent for the treatment of heavy metal contaminated water

Heavy metal contamination in water causes severe adverse effects on human health. Millions of tons of kernel shell are produced as waste from oil palm plantation every year. In this study, palm oil kernel shell (PKS), an agricultural waste is utilized as effective adsorbent for the removal of heavy metals, namely; Cr6+, Pb2+, Cd2+ and Zn2+ from water. Different parameters of adsorptions; solution pH, adsorbent dosage, metal ions concentration and contact time were optimized. The PKS was found to be effective in the adsorption of heavy metal ions Cr6+, Pb2+, Cd2+ and Zn2+ from water with percentage removal of 98.92%, 99.01%, 84.23% and 83.45%, respectively. The adsorption capacities for Cr6+, Pb2+, Cd2+ and Zn2+ were found to be 49.65 mg/g, 43.12 mg/g, 49.62 mg/g and 41.72 mg/g respectively. Kinetics of adsorption process were determined for each metal ion using different kinetic models like the pseudo-first order, pseudo-second order and parabolic diffusion models. For each metal ion the pseudo-second order model fitted well with correlation coefficient, R2 = 0.999. Different isotherm models, namely Freundlich and Langmuir were applied for the determination of adsorption interaction between metal ions and PKS. Adsorption capacity was also determined for each of the metal ions. PKS was found to be very effective adsorbent for the treatment of heavy metal contaminated water and short time of two hours is required for maximum adsorption. This is a comprehensive study almost all the parameters of adsorptions were studied in detail. This is a cost effective and greener approach to utilize the agricultural waste without any chemical treatment, making it user friendly adsorbent.

Carbon Nanomaterials for the Treatment of Heavy Metal-Contaminated Water and Environmental Remediation

Nanotechnology is an advanced field of science having the ability to solve the variety of environmental challenges by controlling the size and shape of the materials at a nanoscale. Carbon nanomaterials are unique because of their nontoxic nature, high surface area, easier biodegradation, and particularly useful environmental remediation. Heavy metal contamination in water is a major problem and poses a great risk to human health. Carbon nanomaterials are getting more and more attention due to their superior physicochemical properties that can be exploited for advanced treatment of heavy metal-contaminated water. Carbon nanomaterials namely carbon nanotubes, fullerenes, graphene, graphene oxide, and activated carbon have great potential for removal of heavy metals from water because of their large surface area, nanoscale size, and availability of different functionalities and they are easier to be chemically modified and recycled. In this article, we have reviewed the recent advancements in the applications of these carbon nanomaterials in the treatment of heavy metal-contaminated water and have also highlighted their application in environmental remediation. Toxicological aspects of carbon-based nanomaterials have also been discussed.