Removal of Organic Micropollutants by Grainy Bentonite-Activated Carbon Adsorbent in a Fixed Bed Column

Innovative technologies for removal of micro plastic: A review of recent advances

Plastics are becoming a pervasive pollutant in every environmental matrix, particularly in the aquatic environment. Due to increased plastic usage and its impact on human and aquatic life, microplastic (MP) pollution has been studied extensively as a global issue. The production of MP has been linked to both consumer and commercial practices. There is a significant amount of MP's that must be removed by wastewater treatment plants before they can be bioaccumulated. Many researchers have recently become interested in the possibility of eliminating MPs in wastewater treatment plants (WWTP). Many studies have analyzed MP's environmental effects, including its emission sources, distribution, and impact on the surrounding environment. The effectiveness of their removal by various wastewater treatment technologies requires a critical review that accounts for all these methods. In this review, we have covered the most useful technologies for the removal of MP during WWTP. The findings of this review should help scientists and policymakers move forward with studies, prototypes, and proposals for significant remediation impact on water quality.

Removal performance and optimisation of pharmaceutical micropollutants from synthetic domestic wastewater by hybrid treatment

Occurrence of pharmaceutical micropollutants in aquatic environments has been one amongst serious environmental problems. During this study, two reactors, including a sequencing batch reactor (SBR) + powdered composite adsorbent (CA) (first reactor, SBR + CA) and a sequencing batch reactor (second reactor, SBR), were designed to treat synthetic wastewater. Powdered CA was added with a dosage of 4.8 g L^-1 to the first reactor. Tap water was contaminated with chemical oxygen demand (COD), ammonia and three pharmaceuticals, namely, atenolol (ATN), ciprofloxacin (CIP) and diazepam (DIA) to produce synthetic wastewater. The SBR + CA illustrated a better performance during synthetic municipal wastewater treatment. Up to 138.6 mg L^-1 (92.4%) of COD and up to 114.2 mg L^-1 (95.2%) of ammonia were removed by the first reactor. Moreover, optimisation of pharmaceuticals removal was conducted through response surface methodology (RSM) and artificial neural network (ANN). Based on the RSM, the best elimination of ATN (90.2%, 2.26 mg L^-1), CIP (94.0%, 2.35 mg L^-1) and DIA (95.5%, 2.39 mg L^-1) was detected at the optimum initial concentration of MPs (2.51 mg L^-1) and the contact time (15.8 h). In addition, ANN represented a high R² value (>0.99) and a rational mean squared error (<1.0) during the optimisation of micropollutants removal by both reactors. Moreover, adsorption isotherm study showed that the Freundlich isotherm could justify the abatement of micropollutants by using CA better than the Langmuir isotherm.

The Efficiency of the Removal of Naphthalene from Aqueous Solutions by Different Adsorbents

The paper presents the results of laboratory tests on possibilities to utilize active carbons produced in Poland (AG-5 and DTO) and clinoptilolite for removing naphthalene from a water solution in the adsorption process. The concentration of naphthalene in the model solution was 20 mg/dm³. The effects of pH, dose and adsorption time were determined under static conditions. Adsorption kinetics were consistent with the pseudo-second-order model (PSO). Among the applied models, the best fit was obtained using the Langmuir isotherms. The maximum adsorption capacity for the activated carbons (AG-5 and DTO) equaled 24.57 and 30.28 mg/g, respectively. For clinoptilolite, all the analyzed models of adsorption poorly described the adsorption process. The flow conditions were realized by filtration method. On the basis of the obtained results, the breakthrough curves, so-called isoplanes, were prepared and served in turn to determine the adsorption capacities in flow conditions. The total adsorption capacities determined under dynamic conditions of the AG-5 and DTO activated carbons were 85.63 and 94.54 mg/g, respectively, and only 2.72 mg/g for clinoptilolite. The exit curves (isoplanes) were also utilized to determine the mass penetration zone (the adsorption front height), as well as to calculate the rate of mass-exchange zone advance.

Cross-linked chitosan/zeolite as a fixed-bed column for organic micropollutants removal from aqueous solution, optimization with RSM and artificial neural network

Organic micropollutants (MPs) in low concentrations can affect aquatic ecosystems and human health. Adsorption technique is one of the promising methods to remove MPs. Chitosan and zeolites are environmentally friendly and low-cost adsorbents. Thus, removal of organic MPs (such as bisphenol A (BPA), carbamazepine (CBZ), ketoprofen (KTF) and tonalide (TND) from aqueous solution via cross-linked chitosan/zeolite, as a fixed-bed column, was investigated in the current study. Hydraulic retention time was set at 0.8 h pH and concentration of organic MPs ranged from 4 to 8 and 0.50 mg/L to 2.0 mg/L, and they were considered as factors in optimizing the removal of pollutants via response surface methodology (RSM). Approximately 1.4560 mg/L (89.0%) of BPA, 1.4724 mg/L (90.0%) of CBZ, 1.4920 mg/L (91.2%) of KTF and 1.4118 mg/L (86.3%) of TND were removed at 5.1 pH and 1.636 mg/L initial concentration as the optimum removal efficiency on the basis of RSM. Artificial neural network (ANN) was used to optimise removal effectiveness for each MP. The high R² values and reasonable mean squared errors indicated that ANN optimized MP removal in a logical aspect. Adsorption isotherm studies revealed that organic MP removal through chitosan/zeolite could be explained with Freundlich and Langmuir isotherms.

Preparation, Characterization and Adsorption Potential of Grainy Halloysite-CNT Composites for Anthracene Removal from Aqueous Solution

Grainy Hal-CNT composites were prepared from powder halloysite nanoclay (Hal) and carbon nanotubes (CNTs). The effect of the amount and type of CNTs, as well as calcination temperature on morphology and properties of Hal-CNT composites and their adsorption capacity of anthracene (ANT), were studied. The surface topography of granules was heterogenous, with cracks and channels created during granulation of powder clay and CNTs. In FTIR, spectra were exhibited only in the bands arising from halloysite, due to its dominance in the granules. The increase in the heating temperature to 550 °C resulted in mesoporosity/macroporosity of the granules, the lowest specific surface area (SSA) and poorest adsorption potential. Overall, SSA of all Hal-CNT composites were higher than raw Hal, and by itself, heated halloysite. The larger amount of CNTs enhanced adsorption kinetics due to the more external adsorption sites. The equilibrium was established with the contact time of approximately 30 min for the sample Hal-SWCNT 85:15, while the samples with loading 96:4, it was 60–90 min. Adsorption isotherms for ANT showed L1 type, which is representative for the sorbents with limited adsorption capacity. The Langmuir model described the adsorption process, suggesting a monolayer covering. The sample Hal-SWCNT 85:15 exhibited the highest adsorption capacity of ANT, due to its highest SSA and microporous character.

Adsorption of Uranium (VI) from Aqueous Solutions by Amino-functionalized Clay Minerals

Silylation of clay minerals from Cherkasy deposit (Ukraine) montmorillonite (layer silicate) and palygorskite (fibrous silicate) was performed using organosilane (3-aminopropyl)triethoxysilane (APTES). Solvents with different polarity (ethanol, toluene) were used in synthesis. The structure of modified minerals was characterized by complex of methods (X-ray powder diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption at −196 °C and thermal analysis). Studies of adsorption characteristics of APTES-modified clay minerals were carried out in relation to uranium (VI). The results indicated that modified montmorillonite and palygorskite were effective materials for water purification from UO22+.