Algal-Bacterial Symbiosis System Treating High-Load Printing and Dyeing Wastewater in Continuous-Flow Reactors under Natural Light

Development and challenges of emerging biological technologies for algal-bacterial symbiosis systems: A review

The algal-bacterial symbiosis system (ABSS) is considered as a sustainable wastewater treatment process. This review provides a comprehensive overview of the mechanisms of ABSS for the removal of common pollutant, heavy metals, and especially for emerging pollutants. For the macroscopical level, this review not only describes in detail the reactor types, influencing factors, and the development of the algal-bacterial process, but also innovatively proposes an emerging process that combines an ABSS with other processes, which enhances the efficiency of removing difficult-to-biodegrade pollutants. Further for the microscopic level, interactions between algae and bacteria, including nutrient exchange, signaling transmission and gene transfer, have been deeply discussed the symbiotic relationship with nutrient removal and biomass production. Finally, recommendations are given for the future development of the ABSS. This review comprehensively examines ABSS principles, development, algal-bacterial interactions, and application in wastewater treatment, aiming to deepen theoretical and practical understanding and advance ABSS technology.

The degradation of printing and dyeing wastewater by manganese-based catalysts

Printing and dyeing wastewater generally has high pH, high turbidity, poor biodegradability, complex composition, and high chroma, which make it one of the most difficult industrial wastewaters to treat. Herein, heterogeneous ozone oxidation technology is applied to oxidize and degrade printing and dyeing wastewater. A metal oxide catalyst supported on activated carbon (γ-MnO₂/AC) was prepared by hydrothermal synthetic method and shown to enable synergistic catalysis involving MnO₂ metal sites and N/C sites. A simulated methyl orange solution was used to determine the effects of various preparation and operation parameters. The results confirmed that the γ-MnO₂/AC catalyst exhibited good chemical oxygen demand (COD) removal and reusability. Additionally, γ-MnO₂/AC demonstrated excellent degradation of the secondary biochemical effluent of printing and dyeing wastewater (COD removal = 72.45% within 120 min). The γ-MnO₂/AC catalyst was fully characterized, and the mechanism governing its catalytic ozone oxidation process was investigated experimentally.

Optimization of Microalgae–Bacteria Consortium in the Treatment of Paper Pulp Wastewater

The microalgae–bacteria consortium is a promising and sustainable alternative for industrial wastewater treatment, since it may allow good removal of organic matter and nutrients, as well as the possibility of producing products with added value from the algae biomass. This research investigated the best bacterial and microalgae inoculation ratio for system start-up and evaluation of removing organic matter (as chemical oxygen demand (COD)), ammoniacal nitrogen (NH4+–N), nitrite nitrogen (NO2−–N), nitrate nitrogen (NO3−–N), phosphate phosphorus (PO43−–P) and biomass formation parameters in six photobioreactors with a total volume of 1000 mL. Reactors were operated for 14 days with the following ratios of pulp mill biomass aerobic (BA) and Scenedesmus sp. microalgae (MA): 0:1 (PBR1), 1:0 (PBR2), 1:1 (PBR3), 3:1 (PBR4), 5:1 (PBR5), and 1:3 (PBR6). Results show that COD removal was observed in just two days of operation in PBR4, PBR5, and PBR6, whereas for the other reactors (with a lower rate of initial inoculation) it took five days. The PBR5 and PBR6 performed better in terms of NH4+–N removal, with 86.81% and 77.11%, respectively, which can be attributed to assimilation by microalgae and nitrification by bacteria. PBR6, with the highest concentration of microalgae, had the higher PO43−–P removal (86%), showing the advantage of algae in consortium with bacteria for phosphorus uptake. PBR4 and PBR5, with the highest BA, led to a better biomass production and sedimentability on the second day of operation, with flocculation efficiencies values over 90%. Regarding the formation of extracellular polymeric substances (EPS), protein production was substantially higher in PBR4 and PBR5, with more BA, with average concentrations of 49.90 mg/L and 49.05 mg/L, respectively. The presence of cyanobacteria and Chlorophyceae was identified in all reactors except PBR1 (only MA), which may indicate a good formation and structuring of the microalgae–bacteria consortium. Scanning electron microscopy (SEM) analysis revealed that filamentous microalgae were employed as a foundation for the fixation of bacteria and other algae colonies.

Emerging biological wastewater treatment using microalgal-bacterial granules: A review

Aiming at deepening the understanding of the formation and evolution of emerging microalgal-bacterial granule (MBG)-based wastewater treatment systems, the recent advances regarding the formation processes, transfer phenomena, innovative bioreactors development and wastewater treatment performance of MBG-based systems are comprehensively reviewed in this work. Particularly, the successful establishments of MBG-based systems with various inocula are summarized. Besides, as the indispensable factors for biochemical reactions in MBGs, the light and substrates (organic matters, inorganic nutrients, etc) need to undergo complicated and multi-scale transfer processes before being assimilated by microorganisms within MBGs. Therefore, the involved transfer phenomena and mechanisms in MBG-based bioreactors are critically discussed. Subsequently, some recent advances of MBG-based bioreactors, the application of MBG-based systems in treating various synthetic and real wastewater, and the future development directions are discussed. In short, this review helps in promoting the development of MBG-based systems by presenting current research status and future perspectives.

Symbiotic treatment of ammonia-nitrogen wastewater by algae and activated sludge: effects of algae and sludge inoculation rates

A symbiotic microalgal-bacterial system may be an optional technology for wastewater treatment. It was composed of microalgae and activated sludge and established in the SBR to explore the effect of different dosing ratios of algae and sludge on the removal of nitrogen and phosphorus from simulated wastewater containing ammonium. It can be seen from the result that varied algae-sludge dosing ratios had a higher removal effect on COD removal, but the difference was not significant. The algal-bacterial symbiosis system had a 100% removal rate for ammonium removal on the 8th day. Relatively speaking, the removal of nutrients and related mechanisms vary with environmental conditions (inoculation rate). In general, when the additive ratio was 5:1 (algae: AS), the removal rate of TN and TP was the highest, reaching 53.85% and 85.13% in the shortest time (14 days), among them, the removal rate of ammonium and COD was 100%, and the reduction rates of Nitrite nitrogen and Nitrate nitrogen were 362.99% and 73.42%, respectively. In addition, 16S rDNA gene analysis results demonstrated that the microbial community in the reactor with algal sludge inoculation ratio of 5:1 had differences in three stages of the initial reaction, the middle reaction and the end of the reaction. Comamonadaceae, Flavobacterium, Paenarthrobacter, Mesorhizobium, Nitrobacter were enriched during the reaction operation.

Research on the treatment mechanism of anthraquinone dye wastewater by algal-bacterial symbiotic system

This study analyzed the role of algae and bacteria in algal-bacterial symbiotic systems for the treatment of dyeing wastewater. The mechanism was investigated by constructing an algae-bacteria tandem system (A system) and a bacteria-algae tandem system (B system). The results showed that the chemical oxygen demand (COD) removal and decolorization rates of A system reached 91% and 90%, respectively, under optimal conditions, which were higher than that of B system. The degradation pathways of A and B systems differed according the degradation product analysis. High-throughput sequencing analysis revealed that Proteobacteria were the dominant bacteria in A and B systems. Armatimonadetes increased considerably in A system. These results show that algae mainly contributed to the preliminary degradation of anthraquinone dye, and resulting products were easily degraded by bacteria. This study provides guidance on the optimization of the system. It can be better adapted to the actual needs of wastewater treatment plants.

Microalgal-Bacterial Consortia as Future Prospect in Wastewater Bioremediation, Environmental Management and Bioenergy Production

In the recent years, microalgae have captured researchers' attention as the alternative feedstock for various bioenergy production such as biodiesel, biohydrogen, and bioethanol. Cultivating microalgae in wastewaters to simultaneously bioremediate the nutrient-rich wastewater and maintain a high biomass yield is a more economical and environmentally friendly approach. The incorporation of algal-bacterial interaction reveals the mutual relationship of microorganisms where algae are primary producers of organic compounds from CO₂, and heterotrophic bacteria are secondary consumers decomposing the organic compounds produced from algae. This review would provide an insight on the challenges and future development of algal-bacterial consortium and its contribution in promoting a sustainable route to greener industry. It is believed that microalgal-bacterial consortia will be implemented in the near-future for sub-sequential treatment of wastewater bioremediation, bioenergy production and CO₂ fixation, promoting sustainability and making extraordinary advancement in life sciences sectors.