Removal of Arsenic(III) Ion from Aqueous Media Using Complex Nickel-Aluminum and Nickel-Aluminum-Zirconium Hydroxides

Granulation of Nickel-Aluminum-Zirconium Complex Hydroxide Using Colloidal Silica for Adsorption of Chromium(VI) Ions from the Liquid Phase

We combined a nickel-aluminum-zirconium complex hydroxide (NAZ) with colloidal silica as a binder to prepare a granulated agent for adsorbing heavy metals from aqueous media. Three samples with different particle diameters were prepared to evaluate the effects on the properties: small (NAZ-S), medium (NAZ-M), and large (NAZ-L). We confirmed the granulation of the prepared samples at a binder content of 25%. NAZ-S had the largest specific surface area and number of hydroxyl groups, followed by NAZ-M and then NAZ-L. Regarding the adsorption capacity, NAZ-S adsorbed the most chromium(VI) ions followed by NAZ-M and then NAZ-L. The binding energy of Cr(2p) at 575-577 eV was detected after adsorption, and the effects of the temperature, contact time, and pH on the adsorption of chromium(VI) ions were evaluated. We identified the following adsorption mechanism: ion exchange with sulfate ions in the interlayer region of the NAZ samples. Finally, the chromium(VI) ions adsorbed by the NAZ samples were easily desorbed using a desorption solution. The results showed that NAZ offers great potential for the removal of chromium(VI) ions from aqueous solutions.

Evaluation of Adsorption Mechanism of Chromium(VI) Ion Using Ni-Al Type and Ni-Al-Zr Type Hydroxides

To evaluate the feasibility of nickel–aluminum (the Ni2+:Al3+ molar ratios of 1.0:1.0 and 1.0:2.0 are denoted as NA11 and NA12, respectively) and nickel–aluminum–zirconium type (the Ni2+:Al3+:Zr4+ molar ratios of 0.9:1.0:0.09 and 0.9:2.0:0.09 are denoted as NAZ1 and NAZ2, respectively) hydroxides for Cr(VI) removal from aqueous media, the adsorption capability and adsorption mechanism of Cr(VI) using the above-mentioned adsorbents were investigated in this study. The quantity of Cr(VI) adsorbed onto NA11, NA12, NAZ1, and NAZ2 was 25.5, 25.6, 24.1, and 24.6 mg g−1, respectively. However, the quantity of aluminum (base metal) released from NA11 (approximately 0.14 mg g−1) was higher than that from NAZ1 (approximately 1.0 µg g−1), indicating that NAZ1 was more suitable for Cr(VI) removal than NA11. In addition, the effects of pH, contact time, and temperature on the adsorption of Cr(VI) were evaluated. Moreover, to elucidate the adsorption mechanism of Cr(VI) using NA11 and NAZ1, the elemental distribution, X-ray photoelectron spectrometry spectra, and ion exchange capability were also determined. Cr(VI) adsorbed onto the NAZ1 surface was easily desorbed using a sodium hydroxide solution under our experimental conditions. The information regarding this study can be useful for removing Cr(VI) from aqueous media.

The Status of Arsenic Pollution in the Greek and Cyprus Environment: An Overview

This study presents an overview about the arsenic (As) contamination and its sources in two European countries. Arsenic is a highly toxic element in its inorganic form and it is carcinogenic to human seven in low concentrations. The occurrence of As in surface water, stream and marine waters, groundwater, bottled water, sediment, soil, mines, and seafood, its environmental origin, and its impacts on human health are discussed. The classes of Geoaccumulation Index for As in Greece ranges from practically uncontaminated to extremely contaminated, and in Cyprus varies between practically uncontaminated and heavily contaminated. In many cases, the As contamination reaches very high concentrations and the impacts may be crucial for the human health and ecosystems. Physicochemical properties, regional climate and geological setting are controlling the occurrence and transport of As. In Greece and Cyprus, the geology, lithology, and ore-deposits are the most important factors for the variation of As contents in water, soil, and sediment. The dominant As species are also determined by the location and the redox conditions. The findings of this paper may be useful for scientists and stakeholders monitoring the studied areas and applying measures for protection of the human and terrestrial ecological receptors (plants, avian, mammals).

Adsorption Performance on As(III) from Aqueous Solution Using the Complex Nickel-Aluminum Hydroxides

In this study, complex nickel-aluminum hydroxides were prepared at different molar ratios (NA12, NA11, NA21, NA31, and NA41), and their adsorption capability on arsenic ions (As(III)) from aqueous media was assessed. The physicochemical properties such as morphology, X-ray diffraction pattern, specific surface area, numbers of hydroxyl groups, and surface pH were investigated. In addition, the effect of contact time, temperature, and pH on the adsorption capability on As(III) was also evaluated. NA41 exerted the highest adsorption capability on As(III) comparable to other prepared adsorbents. However, the specific surface area and numbers of hydroxyl groups did not significantly affect the adsorption capability on As(III). The equilibrium adsorption of As(III) using NA41 was achieved within 24 h, and the obtained results corresponded to a pseudo-second-order model with correlation coefficient value of 0.980. Additionally, the adsorption isotherms were well described by both the Langmuir and Freundlich equations. The optimal pH condition for removal of As(III) using NA41 was found to be approximately 6-8. Finally, the adsorption mechanism of As(III) was assessed by analyzing the binding energy and elemental distribution, which indicated that the electrostatic interaction and ion exchange influenced the adsorption of As(III) under experimental conditions. These results demonstrated the potential candidate of NA41 as an effective adsorbent on As(III) removal from aqueous media.

Agro-Waste Derived Biomass Impregnated with TiO2 as a Potential Adsorbent for Removal of As(III) from Water

A novel type of adsorbent, TiO2 impregnated pomegranate peels (PP@TiO2) was successfully synthesized and its efficacy was investigated based on the removal of As(III) from water. The adsorbent was characterized using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectrometer (EDS), X-ray Diffraction (XRD) analysis, and Fourier Transform Infrared (FTIR) Spectroscopy, to evaluate its morphology, elemental analysis, crystallinity, and functional groups, respectively. Batch experiments were conducted on PP@TiO2 for As(III) adsorption to assess the adsorption isotherm, effect of pH, and adsorption kinetics. Characterization data suggested that TiO2 was successfully impregnated on the biomass substrate. The equilibrium data better fitted to the Langmuir isotherm model having a maximum adsorption capacity of 76.92 mg/g and better distribution coefficients (KD) in the order of ~103 mL/g. The highest percentage of adsorption was found at neutral pH. The adsorption kinetics followed the pseudo-2nd-order model. X-ray Photoelectron Spectroscopy (XPS) of the adsorption product exhibited that arsenic was present as As(III) and partially oxidized to As(V). PP@TiO2 can work effectively in the presence of coexisting anions and could be regenerated and reused. Overall, these findings suggested that the as-prepared PP@TiO2 could provide a better and efficient alternative for the synergistic removal of As(III) from water.

Removal of Cadmium from Contaminated Water Using Coated Chicken Bones with Double-Layer Hydroxide (Mg/Fe-LDH)

Occurrence of heavy metals in freshwater sources is a grave concern due to their severe impacts on public health and aquatic life. Cadmium (Cd2+) is one of the most dangerous heavy metals, and can cause serious diseases even at low concentrations. Hence, a wide range of treatment technologies exist, such as nanofiltration and biological reactors. In this context, the present investigation aims at the development of a new adsorption medium, made from chicken bones coated with iron (Fe) and magnesium (Mg) hydroxides, to remove cadmium from water. This novel chicken bone functional substance was manufactured by applying layered double hydroxides (LDH) into the chicken bones. Initially, the new adsorption medium was characterized using Fourier-transform infrared spectroscopy (FTIR technology), then it was applied to remove cadmium from water under different conditions, including pH of water (3–7.5), agitation speed (50–200 rpm), adsorbent dose (1–20 g per 100 mL), and contact time (30–120 min). Additionally, the reaction kinetics were studied using a pseudo-first order kinetic model. The results obtained from the present study proved that the new adsorption medium removed 97% of cadmium after 120 min at an agitation speed of 150 rpm, pH of 5, and adsorption dose of 10 g per 100 mL. The results also showed that the new adsorption medium contains a significant number of functional groups, including hydroxyl groups. According to the outcomes of the kinetic study, the mechanism of removing metal is attributed to surface precipitation, ion exchange, complexation, hydrogen binding between pollutants, and the LDH-chicken bone substance.