Catalyst Recovery, Regeneration and Reuse during Large-Scale Disinfection of Water Using Photocatalysis

Magnetic iron oxides nanocomposites: synthetic techniques and environmental applications for wastewater treatment

Nanomaterials are an emerging class of compounds with potential to advance technology for wastewater treatment. There are many toxic substances in industrial wastewater that are dangerous to the aquatic ecosystem and public health. These pollutants require the development of novel techniques to remove them from the environment. Iron oxide nanoparticles are being studied and develop as new technology to address the problem of environmental pollution due to their unique properties and effectiveness against different kind of pollutants. A variety of modified iron oxide nanoparticles have been developed through extensive research that mitigates the shortcomings of aggregation or oxidation and enhances their efficiency as novel remediator against environmental pollutants. In this review, we present synthetic approaches used for the preparation of iron oxide nanoparticles and their corresponding nanocomposites, along with the processes in which the materials are used as adsorbent/photocatalysts for environmental remediation. Applications explored includes adsorption of dyes, photocatalytic degradation of dyes, and adsorption of heavy metal ions. The use of iron oxides nanocomposite in real wastewater samples and recyclability of adsorbents and photocatalysts were also explored.

Real-Time Deduction of Mechanisms and Kinetics Underlying Photocatalytic Water Disinfection: Cell Motility and Particle Tracking

The current methods used to study photocatalysis-assisted water disinfection at a laboratory scale may not lead to process scale-up for large-scale implementation. These methods do not capture the process complexity and address all the factors underlying disinfection kinetics, including the physical characteristics (e.g., shape and size) of the photocatalyst, the light intensity, the form of the catalyst (e.g., free-floating and immobilized), and the photocatalyst-microorganism interaction mode (e.g., collision mode and constant contact mode). This drawback can be overcome using in situ methods to track the interaction between the photocatalysts and the microorganisms (e.g., Escherichia coli) and thereby engineering the resulting disinfection kinetics. Contextually, this study employed microscopy and particle-tracking algorithms to quantify in situ cell motility of E. coli undergoing titanium dioxide (TiO2) nanowire-assisted photocatalysis, which was observed to correlate with cell viability closely. This experimentation also informed that the E. coli bacterium interacted with the photocatalysts through collisions (without sustained contact), which allowed for phenomenological modeling of the observed first-order kinetics of E. coli inactivation. Addition of fluorescent-tagging assays to microscopy revealed that cell membrane integrity loss is the primary mode of bacterial inactivation. This methodology is independent of the microorganism or the photocatalyst type and hence is expected to be beneficial for engineering disinfection kinetics.

Shape memory polymer composites (SMPCs) using interconnected nanowire network foams as reinforcements

Shape memory polymers (SMPs), although offer a suite of advantages such as ease of processability and lower density, lag behind their shape memory alloy counterparts, in terms of mechanical properties such as recovery stress and cyclability. Reinforcing SMPs with inorganic nanowires and carbon nanotubes (CNTs) is a sought-after pathway for tailoring their mechanical properties. Here, inorganic nanowires also offer the added advantage of covalently binding the fillers to the surrounding polymer matrices via organic molecules. The SMP composites (SMPCs) thus obtained have well-engineered nanowire-polymer interfaces, which could be used to tune their mechanical properties. A well-known method of fabricating SMPCs involving casting dispersions of nanowires (or CNTs) in mixtures of monomers and crosslinkers typically results in marginal improvements in the mechanical properties of the fabricated SMPCs. This is owed to the constraints imposed by the rule-of-mixture principles. To circumvent this limitation, a new method for SMPC fabrication is designed and presented. This involves infiltrating polymers into pre-fabricated nanowire foams. The pre-fabricated foams were fabricated by consolidating measured quantities of nanowires and a sacrificial material, such as (NH₄)₂CO₃, followed by heating the consolidated mixtures for subliming the sacrificial material. Similar to the case of traditional composites, use of silanes to functionalize the nanowire surfaces allowed for the formation of bonds between both the nanowire-nanowire and the nanowire-polymer interfaces. SMPCs fabricated using TiO₂nanowires and SMP composed of neopentyl glycol diglycidyl ether and poly(propylene glycol) bis(2-aminopropyl ether) (Jeffamine D230) in a 2:1 molar ratio exhibited a 300% improvement in the elastic modulus relative to that of the SMP. This increase was significantly higher than SMPC made using the traditional fabrication route. Well-known powder metallurgy techniques employed for the fabrication of these SMPCs make this strategy applicable for obtaining other SMPCs of any desired shape and chemical composition.

Dynamics of Diffusion- and Immobilization-Limited Photocatalytic Degradation of Dyes by Metal Oxide Nanoparticles in Binary or Ternary Solutions

Photocatalytic degradation employing metal oxides, such as TiO2 nanoparticles, as catalysts is an important technique for the removal of synthetic dyes from wastewater under light irradiation. The basic principles of photocatalysis of dyes, the effects of the intrinsic photoactivity of a catalyst, and the conventional non-fundamental factors are well established. Recently reported photocatalysis studies of dyes in single, binary, and ternary solute solutions opened up a new perspective on competitive photocatalytic degradation of the dyes. There has not been a review on the photocatalytic behavior of binary or ternary solutions of dyes. In this regard, this current review article summarizes the photocatalytic behavior of methylene, rhodamine B, and methyl orange in their binary or ternary solutions. This brief overview introduces the importance of the dynamics of immobilization and reactivity of the dyes, the vital roles of molecular conformation and functional groups on their diffusion onto the catalyst surface, and photocatalytic degradation, and provides an understanding of the simultaneous photocatalytic processes of multiple dyes in aqueous systems.

Enhancing the Photocatalytic Activity of TiO2/Na2Ti6O13 Composites by Gold for the Photodegradation of Phenol

This study aims to synthesize Au/TiO2/Na2Ti6O13 composites to reduce the occurrence of recombination and increase photocatalytic activity in phenol degradation. Gold was used due to its high stability and strong surface plasmon resonance (SPR) properties which make it operate effectively in the visible light spectrum. The prepared composites were characterized using XRD, SEM, TEM, FTIR, and DRS. The results showed that the composite consisted of rutile TiO2 with a crystal size of 38–40 nm and Na2Ti6O13 with a crystal size of 25 nm. The gold in the composite has a crystallite size of 16–19 nm along with the percentage of gold added. Morphological analysis shows that the composite has the form of inhomogeneous spherical particles with gold spread among composites with sizes less than 20 nm. FTIR analysis showed the presence of Na–O and Ti–O–Ti bonds in the composite. The best composite was 3% Au/TiO2/Na2Ti6O13 which had high crystallinity, small particle size, and bandgap energy of 2.59 eV. Furthermore, it had an efficiency 205% better than without gold. After that, cost estimation is proposed as a large-scale application. This study describes the total cost, break-even analysis, and payback analysis for the commercialization needs of the designed photocatalytic catalyst.

Fixed-bed reactor packed with pumice-supported TiO2 for the treatment of polluted water by solar-driven photocatalytic oxidation

A bench-scale tubular photo-reactor was built to evaluate the solar-driven TiO₂-based photocatalytic degradation of synthetic polluted water samples. The reactor was designed as a compound-parabolic-collector and operated in batch mode using TiO₂ P25 immobilized on a bed of pumice. The immobilization of TiO₂ on pumice was carried out using a facile dip impregnation method followed by heat treatment. The obtained material was characterized by SEM, EDS, XRD, and nitrogen adsorption. It was possible to impregnate up to 68.5 mg of TiO₂ per gram of pumice stones of 8-14 mm. Conversions of up to 35-40 and 62-69%, after 4 h of treatment and UV doses of 20.8 ± 3.5 kJ L^-1, were achieved when the catalyst was used immobilized on pumice stone and in the form of a suspension, respectively. The stability and reusability of the catalyst-coated support was tested through a series of consecutive photocatalytic experiments. After four consecutive runs, the immobilized catalyst showed a decrease in its photoactivity leading to removal levels of 23%.

Removal of Chloroacetanilide Herbicides from Water Using Heterogeneous Photocatalysis with TiO2/UV-A

Chloroacetanilide herbicides are widely used in the agricultural sector throughout the world. Because of their poor biodegradability, high water solubility, and long persistence, chloroacetanilide herbicides have a high potential to contaminate water, and conventional water treatment processes do not ensure sufficient removal. Therefore, heterogeneous photocatalysis using TiO2/UV-A was investigated for the degradation of alachlor, acetochlor, and metolachlor from water. Two commercially available TiO2 (P25 and AV-01) were used as photocatalysts. Different experimental setups were also tested. In addition, the toxicity of single herbicides and mixtures of their photocatalytic degradation products to the freshwater alga Chlorella kessleri was investigated via a growth inhibition test. The maximum removal efficiency for alachlor, acetochlor, and metolachlor was 97.5%, 93.1%, and 98.2%, respectively. No significant differences in the removal efficiency of chloroacetanilide herbicides were observed for the photocatalysts used. Although the concentrations of all herbicides during photocatalysis decreased, the toxicity of the resulting mixtures of degradation products increased or remained the same, indicating the formation of toxic degradation products.