Utilization of Pollution Indices, Hyperspectral Reflectance Indices, and Data-Driven Multivariate Modelling to Assess the Bottom Sediment Quality of Lake Qaroun, Egypt

Prediction of potentially toxic elements in water resources using MLP-NN, RBF-NN, and ANFIS: a comprehensive review

Water resources are constantly threatened by pollution of potentially toxic elements (PTEs). In efforts to monitor and mitigate PTEs pollution in water resources, machine learning (ML) algorithms have been utilized to predict them. However, review studies have not paid attention to the suitability of input variables utilized for PTE prediction. Therefore, the present review analyzed studies that employed three ML algorithms: MLP-NN (multilayer perceptron neural network), RBF-NN (radial basis function neural network), and ANFIS (adaptive neuro-fuzzy inference system) to predict PTEs in water. A total of 139 models were analyzed to ascertain the input variables utilized, the suitability of the input variables, the trends of the ML model applications, and the comparison of their performances. The present study identified seven groups of input variables commonly used to predict PTEs in water. Group 1 comprised of physical parameters (P), chemical parameters (C), and metals (M). Group 2 contains only P and C; Group 3 contains only P and M; Group 4 contains only C and M; Group 5 contains only P; Group 6 contains only C; and Group 7 contains only M. Studies that employed the three algorithms proved that Groups 1, 2, 3, 5, and 7 parameters are suitable input variables for forecasting PTEs in water. The parameters of Groups 4 and 6 also proved to be suitable for the MLP-NN algorithm. However, their suitability with respect to the RBF-NN and ANFIS algorithms could not be ascertained. The most commonly predicted PTEs using the MLP-NN algorithm were Fe, Zn, and As. For the RBF-NN algorithm, they were NO3, Zn, and Pb, and for the ANFIS, they were NO3, Fe, and Mn. Based on correlation and determination coefficients (R, R2), the overall order of performance of the three ML algorithms was ANFIS > RBF-NN > MLP-NN, even though MLP-NN was the most commonly used algorithm.

Relationship between Potential Trace Elements Contamination in Sediment and Macrofauna in the Upper Gulf of Thailand

The relationship between heavy metal contamination in sediment and macrofauna in the upper Gulf of Thailand is presented as an indication of the environmental quality of coastal waters. This study aims to monitor five heavy metal elements (As, Cd, Mn, Ni, and Pb) between sediment and the sandworm (Perinereis quatrefagesi (P. quatrefagesi)). The geoaccumulation index (I _geo), enrichment factor (EF), and contamination factor (CF), including the pollution load index (PLI), were used for statistical analyses by one-way analysis of variance (ANOVA), and differences in the data were compared using the least significant difference (LSD) test. The sediment heavy metal concentrations were found to decrease (Al > Mn > Pb > Ni > Cd > As), and the quantity of heavy metal contamination in the sediment was not over the emergency point defined by the Pollution Control Department in Thailand. The Mn at the SH and SP points has I _geo > 0 but <1 and is considered not polluted to moderately polluted. The EF overall is <2 and is deficient in mineral enrichment. The CF of the Samut Sakhon (SH) and Samut Prakan (SP) sites had high Al and Mn values, indicating a low pollution level, but the PLI had an all-site average of 0.0215 ± 0.0252, which is <1. This indicates that the present areas are close to ideal and not polluted. To measure heavy metals in macrofauna, P. quatrefagesi was assessed, and concentrations were found to decrease (Mn > Ni > Cd > Pb > As). The Mn between sediment and the sandworm was directly correlated (r = 0.976; p < 0.01). The sandworm performs as a bioindicator for the quality of coastal sediment, specifically with Mn; thus, the result present at a baseline level may grow in the future if there is no control measure for defensive measures.

Environmental Assessment of Potentially Toxic Elements Using Pollution Indices and Data-Driven Modeling in Surface Sediment of the Littoral Shelf of the Mediterranean Sea Coast and Gamasa Estuary, Egypt

Coastal environmental assessment techniques have evolved into one of the most important fields for the long-term development and management of coastal zones. So, the overall aim of the present investigation was to provide effective approaches for making informed decisions about the Gamasa coast sediment quality. Over a two-year investigation, sediment samples were meticulously collected from the Gamasa estuary and littoral shelf. The inductively coupled plasma mass spectra (ICP-MS) was used to the total concentrations of Al, Fe, Ti, Mg, Mn, Cu, P, V, Ba, Cr, Sr, Co, Ni, Zn, Pb, Zr, and Ce. Single elements environmental pollution indices including the geoaccumulation index (Igeo), contamination factor (CF), and enrichment factor (EF), as well as multi-elements pollution indices comprising the potential ecological risk index (RI), degree of contamination (Dc), and pollution load index (PLI) were used to assess the sediment and the various geo-environmental variables affecting the Mediterranean coastal system. Furthermore, the Dc, PLI, and RI were estimated using the random forest (RF) and Back-Propagation Neural Network (BPNN) depending on the selected elements. According to the Dc results, all the investigated sediment samples categories were considerably contaminated. Cr, Co, Ni, Cu, Zr, V, Zn, P, and Mn showed remarkable enrichment in sediment samples and were originated from anthropogenic sources based on the CF, EF, and Igeo data. Moreover, the RI findings revealed that all the samples tested pose a low ecologically risk. Meanwhile, based on PLI, 70% of the Gamasa estuary samples were polluted, while 93.75% of littoral shelf sediment was unpolluted. The BPNNs -PCs-CD-17 model performed the best and demonstrated a better association between exceptional qualities and CD. With R2 values of 1.00 for calibration (Cal.) and 1.00 for validation (Val.). The BPNNs -PCs-PLI-17 models performed the best in terms of measuring PLI with respective R2 values of 1.00 and 0.98 for the Cal. and Val. datasets. The findings showed that the RF and BPNN models may be used to precisely quantify the pollution indices (Dc, PLI, and RI) in calibration (Cal.) and validation (Val.) datasets utilizing potentially toxic elements of surface sediment.

Appraisal of Surface Water Quality of Nile River Using Water Quality Indices, Spectral Signature and Multivariate Modeling

Surface water quality management is an important facet of the effort to meet increasing demand for water. For that purpose, water quality must be monitored and assessed via the use of innovative techniques, such as water quality indices (WQIs), spectral reflectance indices (SRIs), and multivariate modeling. Throughout the Rosetta and Damietta branches of the Nile River, water samples were collected, and WQIs were assessed at 51 different distinct locations. The drinking water quality index (DWQI), metal index (MI), pollution index (PI), turbidity (Turb.) and total suspended solids (TSS) were assessed to estimate water quality status. Twenty-three physicochemical parameters were examined using standard analytical procedures. The average values of ions and metals exhibited the following sequences: Ca2+ > Na2+ > Mg2+ > K+, HCO32− > Cl− > SO42− > NO3− > CO3− and Al > Fe > Mn > Ba > Ni > Zn > Mo > Cr > Cr, respectively. Furthermore, under the stress of evaporation and the reverse ion exchange process, the main hydrochemical facies were Ca-HCO3 and mixed Ca-Mg-Cl-SO4. The DWQI values of the two Nile branches revealed that 53% of samples varied from excellent to good water, 43% of samples varied from poor to very poor water, and 4% of samples were unsuitable for drinking. In addition, the results showed that the new SRIs extracted from VIS and NIR region exhibited strong relationships with DWQI and MI and moderate to strong relationships with Turb. and TSS for each branch of the Nile River and their combination. The values of the R2 relationships between the new SRIs and WQIs varied from 0.65 to 0.82, 0.64 to 0.83, 0.41 to 0.60 and 0.35 to 0.79 for DWQI, MI, Turb. and TSS, respectively. The PLSR model produced a more accurate assessment of DWQI and MI based on values of R2 and slope than other indices. Furthermore, the partial least squares regression model (PLSR) generated accurate predictions for DWQI and MI of the Rosetta branch in the Val. datasets with an R2 of 0.82 and 0.79, respectively, and for DWQI and MI of the Damietta branch with an R2 of 0.93 and 0.78, respectively. Therefore, the combination of WQIs, SRIs, PLSR and GIS approaches are effective and give us a clear picture for assessing the suitability of surface water for drinking and its controlling factors.