Removal of Per- and Polyfluoroalkyl Substances by Electron Beam and Plasma Irradiation: A Mini-Review

Chloroquine degradation under Fenton-assisted electron beam irradiation in aqueous solution

The removal of pharmaceuticals in the wastewater has been a tough problem. Herein, the Fenton-assisted electron beam radiation was employed to remove chloroquine (CQ) in aqueous solution. The results showed that electron beam removed 63% CQ at 1.5 kGy with •OH, eaq⁻, and H• contributing to its degradation. Additionally, the presence of CO32-, HCO3-, NO3-, Fe2+, and humic acid decreased the degradation efficiency. Furthermore, the presence of S2O82- improved efficiency due to the generation of SO4•⁻ in addition to •OH. The solely Fenton process removed 57% CQ with 2 mM H2O2 and 0.4 mM Fe(II) after 3 h. In comparison, the Fenton-assisted electron beam process effectively increased the removal efficiency of CQ up to 89%, utilizing less amounts of H2O2 and Fe2+ compared to the pure Fenton process. The molar ratio of the Fenton reagents influenced the efficiency of the Fenton process and the Fenton-assisted electron beam process. The low mineralization of CQ based on TOC and COD measurement was attributed to the formation of lower molecular weight organic compounds that degraded slowly. However, TOC and COD reduction in addition to dechlorination and nitrification under the Fenton-assisted electron beam process were higher, compared to the electron beam process. The degradation byproducts of CQ were identified, and the degradation mechanism was proposed. The degradation products were evaluated and determined to be less toxicity, compared to parent CQ molecule. Overall, the degradation of CQ was higher in the Fenton-assisted electron beam process with better mineralization, dechlorination, and nitrification at comparatively lower absorbed doses, compared to electron beam process and using a lower concentration of Fe2+ compared to the Fenton process.

Assessment of Cytotoxicity and Genotoxicity of Plasma-Treated Perfluorooctanesulfonate Containing Water Using In Vitro Bioassays

The contamination of ground and surface waters with per- and polyfluoroalkyl substances (PFASs) is of major concern due to their potential adverse effects on human health. The carbon-fluorine bond makes these compounds extremely stable and hardly degradable by natural processes. Therefore, methods for PFAS removal from water are desperately needed. In this context, plasma treatment of water has been proposed as an effective method with reported removal rates exceeding 90%. However, the high reactivity of plasma discharge results in the formation of many reactive species, like radicals, ozone, or even solvated electrons, which lead to a complex reaction cascade and, consequently, to the generation of a wide variety of different chemical products. The toxicological properties of these PFAS breakdown products are largely unknown. The present study focuses on a toxicological assessment of PFAS-containing plasma-treated water samples. Aqueous solutions of long-chain perfluorooctanesulfonate (PFOS) were treated with various plasma-atmospheric regimes. Subsequently, plasma-treated water samples were subjected to in vitro bioassays. Cytotoxicity and genotoxicity were assessed with the MTS assay using human liver cells (HepG2) and the Ames MPFTM assay using Salmonella Typhimurium strains. Our results demonstrate varying cyto- and genotoxic properties of water containing PFAS breakdown products depending on the atmosphere present during plasma treatment. Based on the results of this study, the atmosphere used during plasma treatment affects the toxicological properties of the treated sample. Further studies are therefore needed to uncover the toxicological implications of the different treatment parameters, including the PFAS starting compound, the atmosphere during treatment, as well as the quantity of plasma energy applied.

PFOA-contaminated soil remediation: a comprehensive review

Soil and groundwater contamination has been raised as a concern due to the capability of posing a risk to human health and ecology, especially in facing highly toxic and emerging pollutants. Because of the prevalent usage of perfluorooctanoic acid (PFOA), in industrial and production processes, and subsequently the extent of sites contaminated with these pollutants, cleaning up PFOA polluted sites is paramount. This research provides a review of remediation approaches that have been used, and nine remediation techniques were reviewed under physical, chemical, and biological approaches categorization. As the pollutant specifications, environmental implications, and adverse ecological effects of remediation procedures should be considered in the analysis and evaluation of remediation approaches, unlike previous research that considered a couple of PFAS pollutants and generally dealt with technical issues, in this study, the benefits, drawbacks, and possible environmental and ecological adverse effects of PFOA-contaminated site remediation also were discussed. In the end, in addition to providing sufficient and applicable understanding by comprehensively considering all aspects and field-scale challenges and obstacles, knowledge gaps have been found and discussed.

Management of per- and polyfluoroalkyl substances (PFAS)-laden wastewater sludge in Maine: Perspectives on a wicked problem

This article discusses the challenges and potential solutions for managing wastewater sludge that contains per- and polyfluoroalkyl substances (PFAS), using the experience in Maine as a guide toward addressing the issue nationally. Traditional wastewater treatment, designed to remove excess organic waste and nutrients, does not eliminate persistent toxic pollutants like PFAS, instead partitioning the chemicals between discharged effluent and the remaining solids in sludge. PFAS chemistry, the molecular size, the alkyl chain length, fluorine saturation, the charge of the head group, and the composition of the surrounding matrix influence PFAS partitioning between soil and water. Land application of sludge, incineration, and storage in a landfill are the traditional management options. Land application of Class B sludge on agricultural fields in Maine peaked in the 1990s, totaling over 2 × 106 cu yd over a 40-year period and has contaminated certain food crops and animal forage, posing a threat to the food supply and the environment. Additional Class A EQ (Exceptional Quality) composted sludge was also applied to Maine farmland. The State of Maine banned the land application of wastewater sludge in August 2022. Most sludge was sent to the state-owned Juniper Ridge Landfill, which accepted 94 270 tons of dewatered sludge in 2022, a 14% increase over 2019. Between 2019 and 2022, the sum of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) concentrations in sludge sent to the landfill ranged from 1.2 to 104.9 ng/g dw. In 2022, the landfill generated 71.6 × 106 l of leachate. The concentration of sum of six PFAS in the leachate increased sixfold between 2021 and 2022, reaching 2 441 ng/l. The retention of PFAS within solid-waste landfills and the potential for long-term release of PFAS through liners into groundwater require ongoing monitoring. Thermal treatment, incineration, or pyrolysis can theoretically mineralize PFAS at high temperatures, yet the strong C-F bond and reactivity of fluorine require extreme temperatures for complete mineralization. Future alternatives may include interim options such as preconditioning PFAS with nonpolar solvents prior to immobilization in landfills, removing PFAS from leachate, and interrupting the cycle of PFAS moving from landfill, via leachate, to wastewater treatment, and then back to the landfill via sludge. Long-term solutions may involve destructive technologies such as electron beam irradiation, electrochemical advanced oxidation, or hydrothermal liquefaction. The article highlights the need for innovative and sustainable solutions for managing PFAS-contaminated wastewater sludge.

Narrative of hazardous chemicals in water: Its potential removal approach and health effects

H₂O is essential for life to exist on earth; it is important to guarantee both the quality and supply of water to satisfy world demand. However, it became contaminated by a number of hazardous, inorganic industrial pollutants, which caused a number of issues like irrigation activities and unsafe human ingestion. Long-term exposure to harmful substances can result in respiratory, immunological, and neurological illnesses, cancer, and problems during pregnancy. Therefore, removing hazardous substances from wastewater and natural water sources is crucial. It is necessary to develop an alternate method that can effectively remove these toxins from water bodies, as conventional methods have several drawbacks. This review primarily aims to achieve the following goals: 1) to discuss the distribution of harmful chemicals: 2) to give specifics on numerous possible strategies for getting rid of hazardous chemicals, and 3) its effects on the environment and consequences for human health have been examined.

Recent advances in the remediation of perfluoroalkylated and polyfluoroalkylated contaminated sites

Per- and polyfluoroalkyl substances (PFASs) are compounds used since 1940 in various formulations in the industrial and consumer sectors due to their high chemical and thermal stability. In recent years, PFASs have caused global concern due to their presence in different water and soil matrices, which threatens the environment and human health. These compounds have been reported to be linked to the development of serious human diseases, including but not limited to cancer. For this reason, PFASs have been considered as persistent organic compounds (COPs) and contaminants of emerging concern (CECs). Therefore, this work aims to present the advances in remediation of PFASs-contaminated soil and water by addressing the current literature. The performance and characteristics of each technique were addressed deeply in this work. The reviewed literature found that PFASs elimination studies in soil and water were carried out at a laboratory and pilot-scale in some cases. It was found that ball milling, chemical oxidation and thermal desorption are the most efficient techniques for the removal of PFASs in soils, however, phyto-microbial remediation is under study, which claims to be a promising technique. For the remediation of PFASs-contaminated water, the processes of electrocoagulation, membrane filtration, ozofractionation, catalysis, oxidation reactions - reduction, thermolysis and destructive treatments with plasma have presented the best results. It is noteworthy that hybrid treatments have also proved to be efficient techniques in the removal of these contaminants from soil and water matrices. Therefore, the improvisation and implication of existing techniques on a field-scale are greatly warranted to corroborate the yields obtained on a pilot- and laboratory-scale.

An Energy Efficient Process for Degrading Perfluorooctanoic Acid (PFOA) Using Strip Fountain Dielectric Barrier Discharge Plasma

Perfluorooctanoic acid (PFOA) is an artificially synthesized per-fluorinated chemical widely used in industry. It is often released into the environment without treatment and causes pollution in groundwater. In this paper, we employed a strip fountain dielectric barrier discharge (SF-DBD) plasma source to degrade PFOA from the water. The effects of power supply mode, discharge gases, pH, the conductivity of the solution, concentration, etc., on the degradation efficiency were studied. For a 200 mL sample of 75 mg/L PFOA, a 99% degradation efficiency with a 204.5 μg/kJ energy production rate was achieved using an average power of 43 W negative pulse argon plasma for 50 min at atmospheric pressure. The total organic carbon concentration (TOC) decreased by 63% after a 60-minute treatment. The SF-DBD proves to be a promising and energy-saving technique to efficiently remove PFOA from water.