Development, Synthesis and Characterization of Tannin/Bentonite-Derived Biochar for Water and Wastewater Treatment from Methylene Blue

Novel granular bentonite-carbon sorbents: textural characterization, adsorption-desorption isotherm, kinetics, and cost estimation

This research focuses on the synthesis of novel low-cost granular sorbents based on bentonite clay of the Navbahor deposit, dust fraction of Angren brown coal, and agricultural wastes such as straw and sawdust to meet the internal needs of the Republic of Uzbekistan. The impact of the initial mixture ingredients on the structural and textural properties of bentonite-coal sorbents (BCSs) has been studied using X-ray diffraction, Raman spectroscopy, Fourier-transform infrared spectroscopy, optical microscopy, and nitrogen adsorption-desorption analysis. For determining the sorption capacity of BCSs, a standard model substance methylene blue (MB), was applied. It was revealed that the maximum adsorption amount of MB was 5.3 mg∙g-1 during 2 h of contact. Prolonging the contact time to 24 h allowed for more extensive diffusion of dye molecules into the sorbent's pores, increasing the adsorption capacity to 13 mg∙g-1. It was demonstrated that BCSs could be regenerated by strong oxidizing agents such as sulfuric acid and hydrogen peroxide, with sulfuric acid proving more effective. Regeneration fully restores sorption properties, particularly at low dye concentrations (up to 0.2 mg∙ml-1). Despite slight reductions in adsorption capacity over multiple regeneration cycles, the sorbents maintain their structural integrity and durability. It is shown that compared to imported expensive activated carbon, the gross profitability of the in-house production of such granular BCSs within the territory of Uzbekistan increases from 48 to 78%, while the net income increases almost three times.

Effect of pyrolysis temperature and hydrothermal activation on structure, physicochemical, thermal and dye adsorption characteristics of the biocarbons

In this study, the possibility of using sawdust from mixed woods to obtain biocarbons in the pyrolysis and steam activation using microwave radiation as an energy source was investigated. Biocarbons were characterized based on the results of N2 adsorption, thermogravimetric analysis (TGA), Fourier spectroscopy (ATR-FTIR), and Raman spectroscopy. Surface characterization was performed by Boehm titration and pHpzc determination. The adsorption capacity of methylene blue (MB) and methyl orange (MO) was studied. It was proved that the pyrolysis temperature and hydrothermal activation increased the biocarbons structural, surface and adsorption parameters of the obtained biocarbons. The amorphous materials of small specific surface area with a significant share of micropores were obtained. The steam activation resulted in significant development of the porous structure (to SBET =729.2 m2 /g and Vp =0.36 cm3 /g). The presence of functional groups, mainly phenolic ones, and pHpzc values indicating a potential for adsorption applications regarding MO and MB were found. The highest sorption capacity concerning MB (qe =122.8 mg/g) and MO (qe =99.1 mg/g) was observed for the steam-activated biocarbon BC-800MW . Using microwave energy hydrothermal activation proved very efficient, resulting in significant surface area and porosity development with a small loss of carbon matter.