Light-Written Reversible 3D Fluorescence and Topography Dual-Pattern with Memory and Self-Healing Abilities

Highly Stretchable and Biocompatible Wrinkled Nanoclay-Composite Hydrogel With Enhanced Sensing Capability for Precise Detection of Myocardial Infarction

It is challenging to balance high biocompability with good mechanical-electrical sensing performance, especially when triggering inflammatory stress response after in vivo implantation. Herein, a bioinspired wrinkle-reinforced adaptive nanoclay-interlocked soft strain-sensor based on a highly stretchable and elastic ionic-conductive hydrogel is reported. This novel nanoclay-composite hydrogel exhibits excellent tensile properties and high sensing capacity with steady and reliable sensing performance due to the structural-mechanical-electrical integrity of the nanoclay crosslinked and nano-reinforced interpenetrating network. The incorporation of amphiphilic ions provides the hydrogel with significant protein resistance, reducing its non-specific adsorption to proteins upon implantation, improving its biosafety as an implanted device, and maintaining the authenticity of the sensing results. Based on the revealed sensing enhanced mechanism based on hierarchical ordered structures as a proof-of-concept application, this hydrogel sensor is demonstrated to be able to accurately localize the region where myocardial infarction occurs and may become a novel strategy for real-time monitoring of pathological changes in heart disease.

Dynamic Surface Wrinkles for In Situ Light-Driven Dynamic Gratings

Dynamic diffraction gratings (DDGs) are considered as one of the most promising technologies for application in smart optical devices because of their in situ dynamic regulation of light propagation on demand; however, it is still a challenge to fabricate dynamic periodic micro/nanostructures due to limited materials and processes. Here, a facile and feasible strategy to construct a near-infrared (NIR) radiation-driven DDG is developed based on a double-sided surface pattern, which is fabricated by dynamic wrinkles and/or soft-imprinted static wrinkles. Poly(dimethylsiloxane) (PDMS) containing carbon nanotubes (CNTs) serves as the substrate, and wrinkles are formed on both sides. The resulting double-sided wrinkle pattern can be used as a DDG to generate various adjustable two-dimensional (2D) diffraction patterns driven by NIR light. Furthermore, with various combinations of wrinkles, we demonstrated a single-sided responsive DDG and a double-sided responsive DDG to realize the evolution of diffraction patterns from 2D to one-dimensional (1D) and 2D to zero-dimensional (0D), respectively. The results provide an alternative for DDGs that will have wide applications in smart display, sensing, and imaging systems.

A stimuli-responsive pillar[5]arene-based hybrid material with enhanced tunable multicolor luminescence and ion-sensing ability

Tunable luminescent materials are becoming more and more important owing to their broad application potential in various fields. Here we construct a pillar[5]arene-based hybrid material with stimuli-responsive luminescent properties and ion-sensing abilities from a pyridine-modified conjugated pillar[5]arene and a planar chromophore oligo(phenylenevinylene) upon coordination of Cd (II) metal cores. This new material not only shows an optimized luminescence due to the minimized π-π stacking and efficient charge transfer properties benefitting from the existence of pillar[5]arene rings, but also exhibits tunable multicolor emission induced by different external stimuli including solvent, ions and acid, indicating great application potential as a fluorescent sensory material, especially for Fe3+. With this pillar[5]arene-based dual-ligand hybrid material, valid optimization and regulation on the fluorescence of the original chromophore have been achieved, which demonstrates a plausible strategy for the design of tunable solid-state luminescent materials and also a prototypical model for the effective regulation of fluorescent properties of planar π systems using synthetic macrocycle-based building blocks.

Photo-Oxidation-Controlled Surface Pattern with Responsive Wrinkled Topography and Fluorescence

Wrinkles and photo-oxidation reactions are widely found in soft materials, which are intimately associated with the failure of materials and structures. It is expected that the photo-oxidation process could also have a positive effect on the material and its surface. Here, we report the photo-oxidation of 2-(4-dietheylaminophenyl)-4,5-bis(4-methoxyphenyl) imidazole (DEA-TAI) into a wrinkled bilayer system to control surface wrinkle and fluorescent patterns, in which a supramolecular polymer network composed of carboxylic acid-containing copolymer (PS-BA-AA; PS=poly(styrene), BA=butyl acrylate; AA=acrylic acid) and DEA-TAI were used as the skin layer. Ultraviolet (UV) irradiation can induce photo-oxidation of the imidazole ring of DEA-TAI to weaken the intermolecular hydrogen bonding between PS-BA-AA and DEA-TAI, resulting in the release of stress in the bilayer system. The wrinkled morphology and fluorescence of the surface can be simultaneously regulated by photo-oxidation of DEA-TAI under UV light, and the resulting wrinkles are extremely sensitive to the pH value, which can be quickly and reversibly erased by NH₃ gas. Smart surfaces with specific hierarchical wrinkles and fluorescence can be achieved by selective irradiation with photomasks, which may find potential applications in smart displays and multi-code information storage.

An Aligned Patterned Biomimetic Elastic Membrane Has a Potential as Vascular Tissue Engineering Material

Cardiovascular disease is the leading cause of death worldwide, with an annual mortality incidence predicted to rise to 23.3 million worldwide by 2030. Synthetic vascular grafts as an alternative to autologous vessels have shown satisfactory long-term results for replacement of large- and medium-diameter arteries, but have poor patency rates when applied to small-diameter vessels. Nanoparticles with low toxicity, contrasting agent properties, tailorable characteristics, targeted/stimuli- response delivery potential, and precise control over behavior (via external stimuli such as magnetic fields) have made possible their use for improving engineered tissues. Poly (styrene-block-butadiene-block-styrene) (SBS) is a kind of widely used thermoplastic elastomer with good mechanical properties and biocompatibility. Here, we synthesized anthracene-grafted SBS (SBS-An) by the method for the fabrication of a biomimetic elastic membrane with a switchable Janus structure, and formed the patterns on the surface of SBS-An under ultraviolet (UV) light irradiation. By irradiating the SBS-An film at different times (0, 10, 20, 30, 60, and 120 s), we obtained six well-ordered surface-patterned biomimetic elastic film with SBS-An at different heights in the thickness direction and the same distances of intervals (named sample-0, 10, 20, 30, 60, and 120 s). The structural effects of the SBS-An films on the adhesion and proliferation of human umbilical vein endothelial cells (HUVECs) were studied, and the possible mechanism was explored. When the HUVECs were cultured on the SBS-An films at different heights in the thickness direction, the sample-30 s with approximately 4 μm height significantly promoted adhesion of the HUVECs at the early stage and proliferation during the culture period compared with the samples of the lower (0, 10, and 20 s) and higher (60 and 120 s) heights. Consistent with this, the sample 30 s showed a higher stimulatory effect on the proliferation- and angiogenesis-related genes. These results suggest that SBS-An with appropriate height could efficiently control bioactivities of the biomimetic elastic membrane and might have great potential in vascular tissue engineering application.

Bioinspired Multiscale Wrinkling Patterns on Curved Substrates: An Overview

The surface wrinkling of biological tissues is ubiquitous in nature. Accumulating evidence suggests that the mechanical force plays a significant role in shaping the biological morphologies. Controlled wrinkling has been demonstrated to be able to spontaneously form rich multiscale patterns, on either planar or curved surfaces. The surface wrinkling on planar substrates has been investigated thoroughly during the past decades. However, most wrinkling morphologies in nature are based on the curved biological surfaces and the research of controllable patterning on curved substrates still remains weak. The study of wrinkling on curved substrates is critical for understanding the biological growth, developing three-dimensional (3D) or four-dimensional (4D) fabrication techniques, and creating novel topographic patterns. In this review, fundamental wrinkling mechanics and recent advances in both fabrications and applications of the wrinkling patterns on curved substrates are summarized. The mechanics behind the wrinkles is compared between the planar and the curved cases. Beyond the film thickness, modulus ratio, and mismatch strain, the substrate curvature is one more significant parameter controlling the surface wrinkling. Curved substrates can be both solid and hollow with various 3D geometries across multiple length scales. Up to date, the wrinkling morphologies on solid/hollow core-shell spheres and cylinders have been simulated and selectively produced. Emerging applications of the curved topographic patterns have been found in smart wetting surfaces, cell culture interfaces, healthcare materials, and actuators, which may accelerate the development of artificial organs, stimuli-responsive devices, and micro/nano fabrications with higher dimensions.

Semi-Quantitatively Designing Two-Photon High-Performance Fluorescent Probes for Glutathione S-Transferases

Glutathione S-transferases (GSTs), detoxification enzymes that catalyze the addition of glutathione (GSH) to diverse electrophilic molecules, are often overexpressed in various tumor cells. While fluorescent probes for GSTs have often adopted the 2,4-dinitrobenzenesulfonyl (DNs) group as the receptor unit, they usually suffer from considerable background reaction noise with GSH due to excessive electron deficiency. However, weakening this reactivity is generally accompanied by loss of sensitivity for GSTs, and therefore, finely turning down the reactivity while maintaining certain sensitivity is critical for developing a practical probe. Here, we report a rational semiquantitative strategy for designing such a practical two-photon probe by introducing a parameter adopted from the conceptual density functional theory (CDFT), the local electrophilicity ω _k , to characterize this reactivity. As expected, kinetic studies established ω _k as efficient to predict the reactivity with GSH, and probe NI3 showing the best performance was successfully applied to detecting GST activities in live cells and tissue sections with high sensitivity and signal-to-noise ratio. Photoinduced electron transfer of naphthalimide-based probes, captured by femtosecond transient absorption for the first time and unraveled by theoretical calculations, also contributes to the negligible background noise.