|
1
|
Xu G, Zhang W, Zhu G, Xia H, Zhang H, Xie Q, Jin P, Zhang H, Yi C, Zhang R, Ji L, Shui T, Moloto N, She W, Sun Z. Potential Gradient-Driven Dual-Functional Electrochromic and Electrochemical Device Based on a Shared Electrode Design. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024:e2401948. [PMID: 38769650 DOI: 10.1002/advs.202401948] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/23/2024] [Revised: 05/07/2024] [Indexed: 05/22/2024]
Abstract
The integration of electrochromic devices and energy storage systems in wearable electronics is highly desirable yet challenging, because self-powered electrochromic devices often require an open system design for continuous replenishment of the strong oxidants to enable the coloring/bleaching processes. A self-powered electrochromic device has been developed with a close configuration by integrating a Zn/MnO2 ionic battery into the Prussian blue (PB)-based electrochromic system. Zn and MnO2 electrodes, as dual shared electrodes, the former one can reduce the PB electrode to the Prussian white (PW) electrode and serves as the anode in the battery; the latter electrode can oxidize the PW electrode to its initial state and acts as the cathode in the battery. The bleaching/coloring processes are driven by the gradient potential between Zn/PB and PW/MnO2 electrodes. The as-prepared Zn||PB||MnO2 system demonstrates superior electrochromic performance, including excellent optical contrast (80.6%), fast self-bleaching/coloring speed (2.0/3.2 s for bleaching/coloring), and long-term self-powered electrochromic cycles. An air-working Zn||PB||MnO2 device is also developed with a 70.3% optical contrast, fast switching speed (2.2/4.8 s for bleaching/coloring), and over 80 self-bleaching/coloring cycles. Furthermore, the closed nature enables the fabrication of various flexible electrochromic devices, exhibiting great potentials for the next-generation wearable electrochromic devices.
Collapse
Affiliation(s)
- Gang Xu
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Wei Zhang
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Guangjun Zhu
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
- State Key Laboratory of High Performance Civil Engineering Materials, Southeast University, Nanjing, 211189, China
| | - Huan Xia
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Hanning Zhang
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Qian Xie
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Peng Jin
- Department of Civil and Mechanical Engineering, Technical University of Denmark, Kgs, Lyngby, 2800, Denmark
| | - Haoyu Zhang
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Chengjie Yi
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Ruqian Zhang
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Lingfeng Ji
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Tao Shui
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| | - Nosipho Moloto
- Molecular Science Institute, School of Chemistry, University of the Witwatersrand, Private Bag 3, Wits 2050, Johannesburg, 2000, South Africa
| | - Wei She
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
- State Key Laboratory of High Performance Civil Engineering Materials, Southeast University, Nanjing, 211189, China
| | - ZhengMing Sun
- Jiangsu Key Laboratory of Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China
| |
Collapse
|
|
2
|
Liang Y, Xu X, Zhao L, Lei C, Dai K, Zhuo R, Fan B, Cheng E, Hassan MA, Gao L, Mu X, Hu N, Zhang C. Advances of Strategies to Increase the Surface Charge Density of Triboelectric Nanogenerators: A Review. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2308469. [PMID: 38032176 DOI: 10.1002/smll.202308469] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/23/2023] [Revised: 10/31/2023] [Indexed: 12/01/2023]
Abstract
Triboelectric nanogenerators (TENGs) have manifested a remarkable potential for harvesting environmental energy and have the prospects to be utilized for various uses, for instance, self-powered sensing devices, flexible wearables, and marine corrosion protection. However, the potential for further development of TENGs is restricted on account of their low output power that in turn is determined by their surface charge density. The current review majorly focuses on the selection and optimization of triboelectric materials. Subsequently, various methods capable of enhancing the surface charge density of TENGs, including environmental regulation, charge excitation, charge pumping, electrostatic breakdown, charge trapping, and liquid-solid structure are comprehensively reviewed. Lastly, the review is concluded by highlighting the existing challenges in enhancing the surface charge density of TENGs and exploring potential opportunities for future research endeavors in this area.
Collapse
Affiliation(s)
- Yu Liang
- School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, P. R. China
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, P. R. China
| | - Xinyu Xu
- School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, P. R. China
- Key Laboratory of Optoelectronic Technology & Systems Ministry of Education, International R & D center of Micro-nano Systems and New Materials Technology, Chongqing University, Chongqing, 400044, P. R. China
| | - Libin Zhao
- School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, P. R. China
- Key Laboratory of Advanced Intelligent Protective Equipment Technology, Ministry of Education, Tianjin, 300401, P. R. China
- Key Laboratory of Hebei Province on Scale-span Intelligent Equipment Technology, Hebei University of Technology, Tianjin, 300401, P. R. China
| | - Chenyang Lei
- School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, P. R. China
| | - Kejie Dai
- School of Electrical and Mechanical Engineering, Pingdingshan University, Pingdingshan, 467000, P. R. China
| | - Ran Zhuo
- Electric Power Research Institute, China Southern Power Grid Company Ltd., Guangzhou, 510080, P. R. China
| | - Beibei Fan
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, P. R. China
| | - E Cheng
- School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, P. R. China
| | - Mohsen A Hassan
- Industrial and Manufacturing Department, Faculty of Innovative Design Engineering, Egypt-Japan University for Science and Technology (E-JUST), New Borg Al-Arab City, 21934, Egypt
| | - Lingxiao Gao
- School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, P. R. China
| | - Xiaojing Mu
- Key Laboratory of Optoelectronic Technology & Systems Ministry of Education, International R & D center of Micro-nano Systems and New Materials Technology, Chongqing University, Chongqing, 400044, P. R. China
| | - Ning Hu
- School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, P. R. China
- State Key Laboratory of Reliability and Intelligence Electrical Equipment, Hebei University of Technology, Tianjin, 300401, P. R. China
| | - Chi Zhang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, P. R. China
| |
Collapse
|
|
3
|
Zheng T, Zhang H, Chen C, Tu X, Fang L, Zhang M, He W, Wang P. Self-Powered Dual-Band Electrochromic Supercapacitor Devices for Smart Window Based on Ternary Dielectric Triboelectric Nanogenerator. NANOMATERIALS (BASEL, SWITZERLAND) 2024; 14:229. [PMID: 38276747 PMCID: PMC10820962 DOI: 10.3390/nano14020229] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/29/2023] [Revised: 01/14/2024] [Accepted: 01/15/2024] [Indexed: 01/27/2024]
Abstract
A dual-band electrochromic supercapacitor device (DESCD) can be driven by an external power supply to modulate solar radiation, which is a promising energy-saving strategy and has broad application prospects in smart windows. However, traditional power supplies, such as batteries, supercapacitors, etc., usually face limited lifetimes and potential environmental issues. Hence, we propose a self-powered DESCD based on TiO2/WO3 dual-band electrochromic material and a ternary dielectric rotating triboelectric nanogenerator (TDR-TENG). The TDR-TENG can convert mechanical energy from the environment into electrical energy to obtain a high output of 840 V, 23.9 µA, and 327 nC. The as-prepared TDR-TENG can drive the TiO2/WO3 film to store energy with a high dual-band modulation amplitude of 41.6% in the visible (VIS) region and 84% in the near-infrared (NIR) region, decreasing the indoor-outdoor light-heat interaction and thereby reducing the building energy consumption. The self-powered DESCD demonstrated in this study has multiple functions of energy harvesting, energy storage, and energy saving, providing a promising strategy for the development of self-powered smart windows.
Collapse
Affiliation(s)
- Tianxiang Zheng
- Energy Materials and Devices Key Lab of Anhui Province for Photoelectric Conversion, School of Materials Science and Engineering, Anhui University, Hefei 230601, China; (T.Z.); (H.Z.); (C.C.); (X.T.); (L.F.); (M.Z.)
| | - Haonan Zhang
- Energy Materials and Devices Key Lab of Anhui Province for Photoelectric Conversion, School of Materials Science and Engineering, Anhui University, Hefei 230601, China; (T.Z.); (H.Z.); (C.C.); (X.T.); (L.F.); (M.Z.)
| | - Chen Chen
- Energy Materials and Devices Key Lab of Anhui Province for Photoelectric Conversion, School of Materials Science and Engineering, Anhui University, Hefei 230601, China; (T.Z.); (H.Z.); (C.C.); (X.T.); (L.F.); (M.Z.)
| | - Xinbo Tu
- Energy Materials and Devices Key Lab of Anhui Province for Photoelectric Conversion, School of Materials Science and Engineering, Anhui University, Hefei 230601, China; (T.Z.); (H.Z.); (C.C.); (X.T.); (L.F.); (M.Z.)
| | - Lin Fang
- Energy Materials and Devices Key Lab of Anhui Province for Photoelectric Conversion, School of Materials Science and Engineering, Anhui University, Hefei 230601, China; (T.Z.); (H.Z.); (C.C.); (X.T.); (L.F.); (M.Z.)
| | - Mingjie Zhang
- Energy Materials and Devices Key Lab of Anhui Province for Photoelectric Conversion, School of Materials Science and Engineering, Anhui University, Hefei 230601, China; (T.Z.); (H.Z.); (C.C.); (X.T.); (L.F.); (M.Z.)
| | - Wen He
- Energy Materials and Devices Key Lab of Anhui Province for Photoelectric Conversion, School of Materials Science and Engineering, Anhui University, Hefei 230601, China; (T.Z.); (H.Z.); (C.C.); (X.T.); (L.F.); (M.Z.)
| | - Peihong Wang
- Energy Materials and Devices Key Lab of Anhui Province for Photoelectric Conversion, School of Materials Science and Engineering, Anhui University, Hefei 230601, China; (T.Z.); (H.Z.); (C.C.); (X.T.); (L.F.); (M.Z.)
- Key Laboratory of Structure and Functional Regulation of Hybrid Materials, Anhui University, Ministry of Education, Hefei 230601, China
| |
Collapse
|
|
4
|
Wang Z, Wang S, Zhang L, Liu H, Xu X. Highly Strong, Tough, and Cryogenically Adaptive Hydrogel Ionic Conductors via Coordination Interactions. RESEARCH (WASHINGTON, D.C.) 2024; 7:0298. [PMID: 38222114 PMCID: PMC10786319 DOI: 10.34133/research.0298] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/06/2023] [Accepted: 12/14/2023] [Indexed: 01/16/2024]
Abstract
Despite the promise of high flexibility and conformability of hydrogel ionic conductors, existing polymeric conductive hydrogels have long suffered from compromises in mechanical, electrical, and cryoadaptive properties due to monotonous functional improvement strategies, leading to lingering challenges. Here, we propose an all-in-one strategy for the preparation of poly(acrylic acid)/cellulose (PAA/Cel) hydrogel ionic conductors in a facile yet effective manner combining acrylic acid and salt-dissolved cellulose, in which abundant zinc ions simultaneously form strong coordination interactions with the two polymers, while free solute salts contribute to ionic conductivity and bind water molecules to prevent freezing. Therefore, the developed PAA/Cel hydrogel simultaneously achieved excellent mechanical, conductive, and cryogenically adaptive properties, with performances of 42.5 MPa for compressive strength, 1.6 MPa for tensile strength, 896.9% for stretchability, 9.2 MJ m-3 for toughness, 59.5 kJ m-2 for fracture energy, and 13.9 and 6.2 mS cm-1 for ionic conductivity at 25 and -70 °C, respectively. Enabled by these features, the resultant hydrogel ionic conductor is further demonstrated to be assembled as a self-powered electronic skin (e-skin) with high signal-to-noise ratio for use in monitoring movement and physiological signals regardless of cold temperatures, with hinting that could go beyond high-performance hydrogel ionic conductors.
Collapse
Affiliation(s)
- Zhuomin Wang
- Institute of Chemical Industry of Forestry Products, Key Laboratory of Biomass Energy and Material, Jiangsu Province; Key Laboratory of Chemical Engineering of Forest Products, National Forestry and Grassland Administration; National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass; Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources,
Chinese Academy of Forestry, Nanjing 210042, China
- College of Chemical Engineering, Jiangsu Co–Innovation Center of Efficient Processing and Utilization of Forest Resources,
Nanjing Forestry University, Nanjing 210037, China
| | - Siheng Wang
- Institute of Chemical Industry of Forestry Products, Key Laboratory of Biomass Energy and Material, Jiangsu Province; Key Laboratory of Chemical Engineering of Forest Products, National Forestry and Grassland Administration; National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass; Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources,
Chinese Academy of Forestry, Nanjing 210042, China
| | - Lei Zhang
- Institute of Chemical Industry of Forestry Products, Key Laboratory of Biomass Energy and Material, Jiangsu Province; Key Laboratory of Chemical Engineering of Forest Products, National Forestry and Grassland Administration; National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass; Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources,
Chinese Academy of Forestry, Nanjing 210042, China
| | - He Liu
- Institute of Chemical Industry of Forestry Products, Key Laboratory of Biomass Energy and Material, Jiangsu Province; Key Laboratory of Chemical Engineering of Forest Products, National Forestry and Grassland Administration; National Engineering Research Center of Low-Carbon Processing and Utilization of Forest Biomass; Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources,
Chinese Academy of Forestry, Nanjing 210042, China
| | - Xu Xu
- College of Chemical Engineering, Jiangsu Co–Innovation Center of Efficient Processing and Utilization of Forest Resources,
Nanjing Forestry University, Nanjing 210037, China
| |
Collapse
|
|
5
|
Dong F, Pang Z, Yang S, Lin Q, Song S, Li C, Ma X, Nie S. Improving Wastewater Treatment by Triboelectric-Photo/Electric Coupling Effect. ACS NANO 2022; 16:3449-3475. [PMID: 35225606 DOI: 10.1021/acsnano.1c10755] [Citation(s) in RCA: 24] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/02/2023]
Abstract
The ability to meet higher effluent quality requirements and the reduction of energy consumption are the biggest challenges in wastewater treatment worldwide. A large proportion of the energy generated during wastewater treatment processes is neglected and lost in traditional wastewater treatment plants. As a type of energy harvesting system, triboelectric nanogenerators (TENGs) can extensively harvest the microscale energies generated from wastewater treatment procedures and auxiliary devices. This harvested energy can be utilized to improve the removal efficiency of pollutants through photo/electric catalysis, which has considerable potential application value in wastewater treatment plants. This paper gives an overall review of the generated potential energies (e.g., water wave energy, wind energy, and acoustic energy) that can be harvested at various stages of the wastewater treatment process and introduces the application of TENG devices for the collection of these neglected energies during wastewater treatment. Furthermore, the mechanisms and catalytic performances of TENGs coupled with photo/electric catalysis (e.g., electrocatalysis, photoelectric catalysis) are discussed to realize higher pollutant removal efficiencies and lower energy consumption. Then, a thorough, detailed investigation of TENG devices, electrode materials, and their coupled applications is summarized. Finally, the intimate coupling of self-powered photoelectric catalysis and biodegradation is proposed to further improve removal efficiencies in wastewater treatment. This concept is conducive to improving knowledge about the underlying mechanisms and extending applications of TENGs in wastewater treatment to better solve the problems of energy demand in the future.
Collapse
Affiliation(s)
- Feilong Dong
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Zhen Pang
- College of Civil Engineering, Zhejiang University of Technology, Hangzhou 310014, China
| | - Shuyi Yang
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Qiufeng Lin
- Department of Earth and Environmental Studies, Montclair State University, Montclair, New Jersey 07043, United States
| | - Shuang Song
- College of Environment, Zhejiang University of Technology, Hangzhou 310014, China
| | - Cong Li
- School of Environment and Architecture, University of Shanghai for Science and Technology, Shanghai 200433, China
| | - Xiaoyan Ma
- College of Civil Engineering, Zhejiang University of Technology, Hangzhou 310014, China
| | - Shuangxi Nie
- School of Light Industry and Food Engineering, Guangxi University, Nanning 530004, China
| |
Collapse
|
|
6
|
Zhou L, Liu L, Qiao W, Gao Y, Zhao Z, Liu D, Bian Z, Wang J, Wang ZL. Improving Degradation Efficiency of Organic Pollutants through a Self-Powered Alternating Current Electrocoagulation System. ACS NANO 2021; 15:19684-19691. [PMID: 34860004 DOI: 10.1021/acsnano.1c06988] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
Although electrocoagulation technology has been widely researched in wastewater treatment, high energy consumption and electrode passivation are still the main challenges for its widespread applications. Here, we propose a self-powered electrocoagulation system based on a triboelectric nanogenerator (TENG) with alternating current (AC) outputs to solve these two issues, and thus enhance the removal efficiency of organic pollutants. Compared with the direct current source, the AC power source can reduce the electrode passivation, produce more aluminum hydroxide compounds after consuming an equal amount of charges, and thus improve the degradation efficiency. Moreover, the removal efficiency can be further enhanced by decreasing the frequency AC, in which a 5.7-fold improvement was achieved at 0.2 Hz compared to DC at 1.8 Hz. Inspired by the low frequency of ocean wave water, we developed a self-powered AC-electrocoagulation system to directly drive the electrocoagulation reaction by harvesting water wave energy, which can effectively remove 94.8% of xylenol orange and 98.8% of water-oil emulsion, and thus completely address the problem of energy consumption. This study further promotes the application of self-powered electrochemical systems in treating environmental pollution.
Collapse
Affiliation(s)
- Linglin Zhou
- Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Li Liu
- Education Ministry Key and International Joint Lab of Resource Chemistry and Shanghai Key Lab of Rare Earth Functional Materials, Shanghai Normal University, Shanghai, 200234, China
| | - Wenyan Qiao
- Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Yikui Gao
- Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Zhihao Zhao
- Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Di Liu
- Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Zhenfeng Bian
- Education Ministry Key and International Joint Lab of Resource Chemistry and Shanghai Key Lab of Rare Earth Functional Materials, Shanghai Normal University, Shanghai, 200234, China
| | - Jie Wang
- Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Zhong Lin Wang
- Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing, 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
- School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332, United States
| |
Collapse
|
|
7
|
Wang F, Yang P, Tao X, Shi Y, Li S, Liu Z, Chen X, Wang ZL. Study of Contact Electrification at Liquid-Gas Interface. ACS NANO 2021; 15:18206-18213. [PMID: 34677929 DOI: 10.1021/acsnano.1c07158] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
It is known that the suspended liquid droplets in clouds can generate electrostatic charges, which finally results in the lightning. However, the detailed mechanism related to the contact-electrification process on the liquid-gas (L-G) interfaces is still poorly understood. Here, by introducing an acoustic levitation method for levitating a liquid droplet, we have studied the electrification mechanism at the L-G interface. The tribo-motion between water droplets and air induced by the ultrasound wave leads to the generation of positive charges on the surface of the droplets, and the charge amount of water droplets (20 μL) gradually reaches saturation within 30 s. The mixed solid particles in droplets can increase the amount of transferred charge, whereas the increase of ion concentration in the droplet can suppress the charge generation. This charge transfer phenomenon at L-G interfaces and the related analysis can be a guidance for the study in many fields, including anti-static, harvesting rainy energy, micro/nano fluidics, triboelectric power generator, surface engineering, and so on. Moreover, the surface charge generation due to L-G electrification is an inevitable effect during ultrasonic levitation, and thus, this study can also work for the applications of the ultrasonic technique.
Collapse
Affiliation(s)
- Fan Wang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Peng Yang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Xinglin Tao
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Yuxiang Shi
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Shuyao Li
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Zhaoqi Liu
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Xiangyu Chen
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
| | - Zhong Lin Wang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 100083, China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences, Beijing 100049, China
- School of Material Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia 30332-0245, United States
| |
Collapse
|