Quasi-One-Dimensional van der Waals Transition Metal Trichalcogenides

High-Sensitive Uncooled Mid-Wave Infrared Detector Based on TiS3 Nanoribbon

High-sensitive uncooled mid-wave infrared (MWIR) photodetection with fast speed is highly desired for biomedical imaging, optical communication, and night vision technology. Low-dimensional materials with low dark current and broadband photoresponse hold great promise for use in MWIR detection. Here, this study reports a high-performance MWIR photodetector based on a titanium trisulfide (TiS3) nanoribbon. This device demonstrates an ultra-broadband photoresponse ranging from the visible spectrum to the MWIR spectrum (405-4275 nm). In the MWIR spectral range, the photodetector achieves competitive high photoresponsivity (R) of 21.1 A W-1, and an impressive specific detectivity (D*) of 5.9 × 1010 cmHz1/2 W-1 in ambient air. Remarkably, the photoresponse speed in the MWIR with τr = 1.3 ms and τd = 1.5 ms is realized which is much faster than the thermal time constant of 15 ms. These findings pave the way for highly sensitive, room-temperature MWIR photodetectors with exceptionally fast response speed.

Ultralong K0.5Mn0.75PS3 Nanowires Tailored by K-Ion Scissors for Extraordinary Sodium-Ion Storage

1D layered nanowires (NWs) are expected to be excellent electrode materials due to their efficient electron/ion transport and strain/stress relaxation. However, it is a great challenge to synthesize layered NWs by a top-down synthetic route. Herein, ultralong 1D layered K0.5Mn0.75PS3 NWs (length: >100 µm; diameter: ≈300 nm) are synthesized for the first time using "K-ion chemical scissors", whose excellent sodium storage performance originates from the bifunctional structural unit, ingeniously combining the alloying energy storage functional unit (P-P dimer) with the quasi-intercalated functional unit ([MnS3]4- framework). Stress-driven K-ion scissors achieve the rapid transformation of MnPS3 bulk to K0.5Mn0.75PS3 NWs with directed tailoring. Compared to MnPS3, the NWs exhibit enlarged interlayer spacing (9.32 Å), enhanced electronic conductivity (8.17 × 10-5 S m-1 vs 4.47 × 10-10 S m-1), and high ionic conductivity (2.14 mS cm-1). As expected, the NWs demonstrate high capacity (709 mAh g-1 at 0.5 A g-1) and excellent cycling performance (≈100% capacity retention after 2500 cycles at 10 A g-1), ranking among metal thiophosphates. A quasi-topological intercalation mechanism of the NWs is revealed through further characterizations. This work expands the top-down synthesis approach and offers innovative insights for the cost-effective and large-scale fabrication of NWs with outstanding electrochemical performance.

van der Waals Stacking-Determined Polymorphs of Quasi-One-Dimensional BiSCl Grown by Chemical Vapor Deposition

We report chemical vapor deposition (CVD) synthesis of two quasi-one-dimensional (quasi-1D) polymorphs of BiSCl, denoted by y-BiSCl and r-BiSCl. The length of the CVD samples can reach about 0.4 mm. Such quasi-1D samples of the two polymorphs can be readily separated into individual pieces for either characterization or application. The two polymorphs can be clearly differentiated by Raman spectroscopy. First-principles calculations and group analysis are used to assign each Raman peak to the corresponding vibrational mode. Ultraviolet-visible measurements on solution grown thin-film samples reveal that the two polymorphs exhibit significantly different band gaps of 2.08 eV (y-BiSCl) and 1.81 eV (r-BiSCl). First-principles calculation further shows that the interatomic chain binding energy is 18.1 meV/Å2, confirming that the van der Waals stacking determines the difference in their band gaps. Our findings highlight the possibility of realizing the desired functionalities in quasi-1D materials by controlling stacking orientation.

SiX2 (X = S, Se) Single Chains and (Si-Ge)X2 Quaternary Alloys

Layered or chain materials have received significant research attention owing to their interesting physical properties, which can dramatically change when the material is thinned from bulk (three-dimensional) to thin two-dimensional sheet or one-dimensional (1D) chain form. Materials with the stoichiometry AX2 with A = Si or Ge and X = S or Se form an especially intriguing semiconducting class. For example, bulk silicon dichalcogenides (SiX2) consist of 1D chains held together by van der Waals forces. Although this structural configuration has the potential to reveal interesting physical phenomena within the 1D limit, obtaining SiX2 single chains has been challenging. We here examine experimentally and theoretically SiX2 materials in the low chain number limit. Carbon nanotubes serve as growth templates and stabilize and protect the structures, and atomic-resolution scanning transmission electron microscopy directly identifies the atomic structure. Two distinct chain structures are observed for SiX2. SixGe1-xS2(1-y)Se2y quaternary alloy chains are also synthesized and characterized, demonstrating tunable semiconducting properties at the atomic-chain level. Density functional theory calculations reveal that the band gap of these alloy chains can be widely tuned through composition engineering. This work offers the possibilities for synthesizing and controlling semiconductor compositions at the single-chain limit to tailor material properties.

Lattice-guided assembly of optoelectronically active π-conjugated peptides on 1D van der Waals single crystals

The deployment of organic molecules in high-performance devices strongly relies on the formation of well-ordered domains, which is often complicated by the dynamic and sensitive nature of supramolecular interactions. Here, we engineered the assembly of water-processable, optoelectronic π-conjugated peptides into well-defined organic-inorganic heterointerfaced assemblies by leveraging the long-range anisotropic ordering of 1D van der Waals (vdW) crystals composed of subnanometer-thick transition metal sulfide chains (MS3; M = Nb, Ta) as assembly templates. We found that the monomers can readily form 1D supramolecular assemblies onto the underlying crystal surface, owing to the structural correspondence between the π-π interactions of the quaterthiophene (4T)-based peptide units (DDD-4T) and sulfur atom ordering along the NbS3 (100) surface. The heterointerfaced assemblies exhibited substantially red-shifted photoluminescence and enhanced visible-range photocurrent generation compared to solution-assembled films. Our results underscore the role of lattice matching in forming ordered supramolecular assemblies, offering an emergent approach to assembling organic building blocks endowed with improved physical properties.

Photodetectors Based on ZrS3/MoS2 Heterostructures

High-performance photodetectors with the detection capability of linearly polarized light have broad applications in both military and civilian fields. Quasi-one-dimensional ZrS3 as an emerging anisotropic two-dimensional material has come under the spotlight owing to its intriguing properties. However, the performance of the ZrS3 photodetector is seriously restricted by its low responsivity. Herein, a novel high-performance photodetector based on the van der Waals ZrS3/MoS2 heterostructure is proposed. Attributed to the charge trapping-assisted photogating effect, interlayer carrier transitions, and fast spatial separation of the photogenerated electron-hole pairs, the device displays superior photoresponse characteristics ranging from the ultraviolet to the visible spectrum in terms of high responsivity up to 212 A/W, an extraordinary external quantum efficiency of 8.5 × 104%, and a prompt rise/decay time of 0.19/0.38 ms. In addition, owing to the profound birefringence and dichroism effects in ZrS3 together with strong light-matter interactions in the heterostructure, profound linear-polarization sensitivity is demonstrated with a dichroic ratio of about 2.8. Overall, this photodetector not only is integrated with the excellent properties of ZrS3 and monolayer MoS2 but also further enhances the advantages through interlayer couplings, which demonstrate the strong potential of the ZrS3-based devices for high-performance, ultrafast, and polarization-sensitive photodetection.

Low-Dimensional-Materials-Based Photodetectors for Next-Generation Polarized Detection and Imaging

The vector characteristics of light and the vectorial transformations during its transmission lay a foundation for polarized photodetection of objects, which broadens the applications of related detectors in complex environments. With the breakthrough of low-dimensional materials (LDMs) in optics and electronics over the past few years, the combination of these novel LDMs and traditional working modes is expected to bring new development opportunities in this field. Here, the state-of-the-art progress of LDMs, as polarization-sensitive components in polarized photodetection and even the imaging, is the main focus, with emphasis on the relationship between traditional working principle of polarized photodetectors (PPs) and photoresponse mechanisms of LDMs. Particularly, from the view of constitutive equations, the existing works are reorganized, reclassified, and reviewed. Perspectives on the opportunities and challenges are also discussed. It is hoped that this work can provide a more general overview in the use of LDMs in this field, sorting out the way of related devices for "more than Moore" or even the "beyond Moore" research.