Novel cell seeding system into a porous scaffold using a modified low-pressure method to enhance cell seeding efficiency and bone formation

Towards Stem Cell Therapy for Critical-Sized Segmental Bone Defects: Current Trends and Challenges on the Path to Clinical Translation

The management and reconstruction of critical-sized segmental bone defects remain a major clinical challenge for orthopaedic clinicians and surgeons. In particular, regenerative medicine approaches that involve incorporating stem cells within tissue engineering scaffolds have great promise for fracture management. This narrative review focuses on the primary components of bone tissue engineering-stem cells, scaffolds, the microenvironment, and vascularisation-addressing current advances and translational and regulatory challenges in the current landscape of stem cell therapy for critical-sized bone defects. To comprehensively explore this research area and offer insights for future treatment options in orthopaedic surgery, we have examined the latest developments and advancements in bone tissue engineering, focusing on those of clinical relevance in recent years. Finally, we present a forward-looking perspective on using stem cells in bone tissue engineering for critical-sized segmental bone defects.

Current Progress in Vascular Engineering and Its Clinical Applications

Coronary heart disease (CHD) is caused by narrowing or blockage of coronary arteries due to atherosclerosis. Coronary artery bypass grafting (CABG) is widely used for the treatment of severe CHD cases. Although autologous vessels are a preferred choice, healthy autologous vessels are not always available; hence there is a demand for tissue engineered vascular grafts (TEVGs) to be used as alternatives. However, producing clinical grade implantable TEVGs that could healthily survive in the host with long-term patency is still a great challenge. There are additional difficulties in producing small diameter (<6 mm) vascular conduits. As a result, there have not been TEVGs that are commercially available. Properties of vascular scaffolds such as tensile strength, thrombogenicity and immunogenicity are key factors that determine the biocompatibility of TEVGs. The source of vascular cells employed to produce TEVGs is a limiting factor for large-scale productions. Advanced technologies including the combined use of natural and biodegradable synthetic materials for scaffolds in conjunction with the use of mesenchyme stem cells or induced pluripotent stem cells (iPSCs) provide promising solutions for vascular tissue engineering. The aim of this review is to provide an update on various aspects in this field and the current status of TEVG clinical applications.

Impact of High-Altitude Hypoxia on Early Osseointegration With Bioactive Titanium

Nowadays, the bone osseointegration in different environments is comparable, but the mechanism is unclear. This study aimed to investigate the osseointegration of different bioactive titanium surfaces under normoxic or high-altitude hypoxic environments. Titanium implants were subjected to one of two surface treatments: (1) sanding, blasting, and acid etching to obtain a rough surface, or (2) extensive polishing to obtain a smooth surface. Changes in the morphology, proliferation, and protein expression of osteoblasts on the rough and smooth surfaces were examined, and bone formation was studied through western blotting and animal-based experiments. Our findings found that a hypoxic environment and rough titanium implant surface promoted the osteogenic differentiation of osteoblasts and activated the JAK1/STAT1/HIF-1α pathway in vitro. The animal study revealed that following implant insertion in tibia of rabbit, bone repair at high altitudes was slower than that at low altitudes (i.e., in plains) after 2weeks; however, bone formation did not differ significantly after 4weeks. The results of our study showed that: (1) The altitude hypoxia environment would affect the early osseointegration of titanium implants while titanium implants with rough surfaces can mitigate the effects of this hypoxic environment on osseointegration, (2) the mechanism may be related to the activation of JAK1/STAT1/HIF-1α pathway, and (3) our results suggest the osteogenesis of titanium implants, such as oral implants, is closely related to the oxygen environment. Clinical doctors, especially dentists, should pay attention to the influence of hypoxia on early osseointegration in patients with high altitude. For example, it is better to choose an implant system with rough implant surface in the oral cavity of patients with tooth loss at high altitude.

Advantages of creation of holes and removal of air in artificial bone for early bone formation when used artificial bone as a gap filler in open wedge high tibial osteotomy

Recently, many facilities perform open wedge high tibial osteotomy (OWHTO) using artificial bone as a gap filler. However, there are many cases in which artificial bone is used without a clear purpose. We recommend a surgical technique to promote early synostosis between artificial bone and recipient bone due to mechanical support especially in the early stage after OWHTO. At our hospital, beta-tricalcium phosphate (β-TCP) with 60% porosity is used in OWHTO. Initially, a wedge-shaped block-type β-TCP, as large as possible, was inserted into the gap. However, from the standpoint of initial mechanical support, we changed the artificial bone size and created intentional holes. Furthermore, we removed air bubbles from β-TCP. We evaluated the synostosis on the basis of clinical results and diagnostic imaging. As a result of creating holes and removing air from the artificial bone, a trend toward faster synostosis was noted, especially at the early stage. No adverse events such as tibial plateau fracture, lateral cortical fracture, plate and screw failure and correction loss due to reducing the size of the artificial bone occurred, but placement of the artificial bone in contact with cortical bone and surface contact installation with the recipient bone tissue was important. When using artificial bone in OWHTO, holes formation and removal of air from the artificial bone are recommended for faster synostosis between artificial bone and recipient bone in the early stage after surgery. Artificial bone should be used, with attention to its positioning and shape, for efficient mechanical support.

Bone Defect Regeneration by a Combination of a β-Tricalcium Phosphate Scaffold and Bone Marrow Stromal Cells in a Non-Human Primate Model

Background:

Reconstruction of large bone defects is a great challenge in orthopedic research. In the present study, we prepared composites of bone marrow-derived stromal cells (BMSCs) and β-tricalcium phosphate (β-TCP) with three novel aspects: proliferation of BMSCs with continuous dexamethasone treatment, cell loading under low pressure, and use of autologous plasma as the cell loading medium. The effectiveness of the resulting composite for large bone-defect reconstruction was tested in a non-human primate model, and the bone union capability of the regenerated bones was examined.

Materials and Methods:

Primary surgery: Bone defects (5 cm long) were created in the left femurs of nine cynomolgus monkeys with resection of the periosteum (five cases) or without resection (four cases), and porous β-TCP blocks were transplanted into the defects. Secondary surgery: Bone marrow aspirates harvested from seven of the nine monkeys were cultured with dexamethasone, and BMSCs were obtained. BMSCs were suspended in autologous plasma and introduced into a porous β-TCP block under low-pressure conditions. The BMSC/β-TCP composites were transplanted into bone defects created at the same sites as the primary surgery. Bone union evaluation: Five regenerated femurs were shortened by osteotomy surgery 8 to 15 months after transplantation of the β-TCP/BMSC composites, and bone union was evaluated radiographically.

Results:

After the primary surgery and treatment with β-TCP alone, one of the five periosteum-resected monkeys and two of the four periosteum-preserved monkeys exhibited successful bone reconstruction. In contrast, five of the seven cases treated with the β-TCP/MSC composite showed successful bone regeneration. In four of the five osteotomy cases, bone union was confirmed.

Conclusion:

We validated the effectiveness of a novel β-TCP/BMSC composite for large bone defect regeneration and confirmed the bone union capability of the regenerated bone.

Strategies to Maximize the Potential of Marine Biomaterials as a Platform for Cell Therapy

Marine biopolymers have been explored as a promising cell therapy system for efficient cell delivery and tissue engineering. However, the marine biomaterial-based systems themselves have exhibited limited performance in terms of maintenance of cell viability and functions, promotion of cell proliferation and differentiation as well as cell delivery efficiency. Thus, numerous novel strategies have been devised to improve cell therapy outcomes. The strategies include optimization of physical and biochemical properties, provision of stimuli-responsive functions, and design of platforms for efficient cell delivery and tissue engineering. These approaches have demonstrated substantial improvement of therapeutic outcomes in a variety of research settings. In this review, therefore, research progress made with marine biomaterials as a platform for cell therapy is reported along with current research directions to further advance cell therapies as a tool to cure incurable diseases.

Bone Marrow Stromal Cells Combined with a Honeycomb Collagen Sponge Facilitate Neurite Elongation in Vitro and Neural Restoration in the Hemisected Rat Spinal Cord

In the last decade, researchers and clinicians have reported that transplantation of bone marrow stromal cells (BMSCs) promotes functional recovery after brain or spinal cord injury (SCI). However, an appropriate scaffold designed for the injured spinal cord is needed to enhance the survival of transplanted BMSCs and to promote nerve regeneration. We previously tested a honeycomb collagen sponge (HC), which when applied to the transected spinal cord allowed bridging of the gap with nerve fibers. In this study, we examined whether the HC implant combined with rat BMSCs increases nerve regeneration in vitro and enhances functional recovery in vivo. We first evaluated the neurite outgrowth of rat dorsal root ganglion (DRG) explants cultured on HC with or without BMSCs in vitro. Regeneration of neurites from the DRGs was increased by BMSCs combined with HC scaffolds. In the in vivo study, 3-mm-long HC scaffolds with or without BMSCs were implanted into the hemisected rat thoracic spinal cord. Four weeks after the procedure, rats implanted with HC scaffolds containing BMSCs displayed better motor and sensory recovery than those implanted with HC scaffolds only. Histologically, more CGRP-positive sensory fibers at the implanted site and 5-HT-positive serotonergic fibers contralateral to the implanted site were observed in spinal cords receiving BMSCs. Furthermore, more rubrospinal neurons projected distally to the HC implant containing BMSCs. Our study indicates that the application of BMSCs in a HC scaffold in the injured spinal cord directly promoted sensory nerve and rubrospinal tract regeneration, thus resulting in functional recovery.

Stem cell therapy and tissue engineering for correction of congenital heart disease

This review article reports on the new field of stem cell therapy and tissue engineering and its potential on the management of congenital heart disease. To date, stem cell therapy has mainly focused on treatment of ischemic heart disease and heart failure, with initial indication of safety and mild-to-moderate efficacy. Preclinical studies and initial clinical trials suggest that the approach could be uniquely suited for the correction of congenital defects of the heart. The basic concept is to create living material made by cellularized grafts that, once implanted into the heart, grows and remodels in parallel with the recipient organ. This would make a substantial improvement in current clinical management, which often requires repeated surgical corrections for failure of implanted grafts. Different types of stem cells have been considered and the identification of specific cardiac stem cells within the heterogeneous population of mesenchymal and stromal cells offers opportunities for de novo cardiomyogenesis. In addition, endothelial cells and vascular progenitors, including cells with pericyte characteristics, may be necessary to generate efficiently perfused grafts. The implementation of current surgical grafts by stem cell engineering could address the unmet clinical needs of patients with congenital heart defects.

After repeated division, bone marrow stromal cells express inhibitory factors with osteogenic capabilities, and EphA5 is a primary candidate

The differentiation capability of human bone marrow stromal cells (hBMSCs) is thought to deteriorate over multiple doubling processes. To clarify the deterioration mechanisms, the multilineage differentiation capabilities of short- and long-term passaged BMSCs were compared. Predictably, long-term passaged BMSCs showed reduced differentiation capacities compared to short-term passaged cells. Furthermore, a non-human primate heterotopic bone formation model demonstrated that long-term passaged BMSCs have bone formation capabilities but also exert inhibitory effects on bone formation. This finding indicated that long-term passaged BMSCs express higher levels of inhibitory factors than short-term passaged BMSCs do. Co-culture assays of short- and long-term passaged BMSCs suggested that the inhibitory signals required cell-cell contact and would therefore be expressed on the cell membrane. A microarray analysis of BMSCs identified ephrin type-A receptor 5 (EphA5) as an inhibitory factor candidate. Quantitative PCR revealed that among all members of the ephrin and Eph receptor families, only the expression of EphA5 was increased by BMSC proliferation. A gene knockdown analysis using siRNAs demonstrated that knockdown of EphA5 gene expression in long-term passaged BMSCs led to an increase in ALP mRNA expression. These results indicate that EphA5 may be a negative regulator of bone formation. A better understanding of the roles of the ephrin and Eph receptor families in hBMSCs may lead to alternative approaches for manipulating hBMSC fate. In addition, this avenue of discovery may provide new therapeutic targets and quality-control markers of the osteogenic differentiation capabilities of hBMSCs.

Massive bone reconstruction with heat-treated bone graft loaded autologous bone marrow-derived stromal cells and β-tricalcium phosphate composites in canine models

Bone marrow-derived stromal cells (BMSCs) contain mesenchymal stem cells that are capable of forming various mesenchymal tissues. We hypothesized that BMSCs and β-tricalcium phosphate (β-TCP) composites would promote the remodeling of large-sized autologous devitalized bone grafts; therefore, the aim of this study was to evaluate the effects of the composites on the remodeling of autologous devitalized bone grafts. Autologous BMSCs cultured in culture medium containing dexamethasone (10(-7)  M) were loaded into porous β-TCP granules under low-pressure. Theses BMSC/TCP composites were put into the bone marrow cavity of autologous heat-treated bone (femoral diaphysis, 65-mm long, 100°C, 30 min) and put back to the harvest site. In the contralateral side, β-TCP without BMSC were used in the same manner as the opposite side as the control. Treatment with the BMSC/TCP composites resulted in a significant increase in thickness, bone mineral density, and matured bone volume of the cortical bone at the center of the graft compared to the control. Histological analysis showed matured regenerated bone in the BMSC loaded group. These results indicate that BMSC/TCP composites facilitated bone regeneration and maturation at the graft site of large-sized devitalized bone. This method could potentially be applied for clinical use in the reconstruction of large bone defects such as those associated with bone tumors.

Effect of static seeding methods on the distribution of fibroblasts within human acellular dermis

INTRODUCTION

When developing tissue engineered solutions for existing clinical problems, cell seeding strategies should be optimized for desired cell distribution within matrices. The purpose of this investigation was to compare the effects of different static cell seeding methods and subsequent static cell culture for up to 12 days with regard to seeding efficiency and resulting cellular distribution in acellular dermis.

MATERIALS AND METHODS

The seeding methods tested were surface seeding of both unmodified and mechanically incised dermis, syringe injection of cell suspension, application of low-pressure and use of an ultrasonic bath to remove trapped air. The effect of "platelet derived growth factor" (PDGF) on surface seeding and low pressure seeding was also investigated. Scaffolds were incubated for up to 12 days and were histologically examined at days 0, 4, 8 and 12 for cell distribution and infiltration depth. The metabolic activity of the cells was quantified with the MTT assay at the same time points.

RESULTS

The 50 ml syringe degassing procedure produced the best results in terms of seeding efficiency, cell distribution, penetration depth and metabolic activity within the measured time frame. The injection and ultrasonic bath methods produced the lowest seeding efficiency. The incision method and the 20 ml syringe degassing procedure produced results that were not significantly different to those obtained with a standard static seeding method.

CONCLUSION

We postulate that air in the pores of the human acellular dermis (hAD) hinders cell seeding and subsequent infiltration. We achieved the highest seeding efficiency, homogeneity, infiltration depth and cell growth within the 12 day static culturing period by degassing the dermis using low- pressure created by a 50 ml syringe. We conclude that this method to eliminate trapped air provides the most effective method to seed cells and to allow cell proliferation in a natural scaffold.

In vivo osteointegration of three-dimensional crosslinked gelatin-coated hydroxyapatite foams

The main requirement of bone regenerative scaffolds is to enhance the chemical reactions leading to the formation of new bone while providing a proper surface for tissue in-growth as well as a suitable degradation rate. Calcium phosphate ceramics are conformed by different shaping methods. One requirement is to design implants and scaffolds with suitable shapes and sizes, but also with interconnected porosity to ensure bone oxygenation and angiogenesis. In this work we present the in vivo performance of hierarchically arranged glutaraldehyde crosslinked, gelatin-coated nanocrystalline hydroxyapatite (HABP) scaffolds (1-400 μm), with high potential as bone regenerators and excellent osteointegration performance, as well as an appropriate bioresorption rate. 6×10 mm bone defects were made in the lateral aspect of both distal femoral epiphysis of 15 mature (9 months old) male New Zealand rabbits. The bone defect in the left femur was then filled by using HABP foam cylinders, allowing the surgeon to carve the appropriate shape for a particular bone defect with high stability intra-operatively. The foam becomes swollen with body fluid and fills the cavity, ensuring good fixation without the need for a cement. Histological and radiographical studies after 4 months implantation showed healing of all treated bone defects, with bone integration of the HABP foam cylinders and bone conduction over the surface. This in vivo behaviour offers promising results as a scaffold for clinical applications, mainly in orthopaedics and dentistry.

In-vivo generation of bone via endochondral ossification by in-vitro chondrogenic priming of adult human and rat mesenchymal stem cells

BACKGROUND

Bone grafts are required to repair large bone defects after tumour resection or large trauma. The availability of patients' own bone tissue that can be used for these procedures is limited. Thus far bone tissue engineering has not lead to an implant which could be used as alternative in bone replacement surgery. This is mainly due to problems of vascularisation of the implanted tissues leading to core necrosis and implant failure. Recently it was discovered that embryonic stem cells can form bone via the endochondral pathway, thereby turning in-vitro created cartilage into bone in-vivo. In this study we investigated the potential of human adult mesenchymal stem cells to form bone via the endochondral pathway.

METHODS

MSCs were cultured for 28 days in chondrogenic, osteogenic or control medium prior to implantation. To further optimise this process we induced mineralisation in the chondrogenic constructs before implantation by changing to osteogenic medium during the last 7 days of culture.

RESULTS

After 8 weeks of subcutaneous implantation in mice, bone and bone marrow formation was observed in 8 of 9 constructs cultured in chondrogenic medium. No bone was observed in any samples cultured in osteogenic medium. Switch to osteogenic medium for 7 days prevented formation of bone in-vivo. Addition of β-glycerophosphate to chondrogenic medium during the last 7 days in culture induced mineralisation of the matrix and still enabled formation of bone and marrow in both human and rat MSC cultures. To determine whether bone was formed by the host or by the implanted tissue we used an immunocompetent transgenic rat model. Thereby we found that osteoblasts in the bone were almost entirely of host origin but the osteocytes are of both host and donor origin.

CONCLUSIONS

The preliminary data presented in this manuscript demonstrates that chondrogenic priming of MSCs leads to bone formation in vivo using both human and rat cells. Furthermore, addition of β-glycerophosphate to the chondrogenic medium did not hamper this process. Using transgenic animals we also demonstrated that both host and donor cells played a role in bone formation. In conclusion these data indicate that in-vitro chondrogenic differentiation of human MSCs could lead to an alternative and superior approach for bone tissue engineering.

Efficient Cell-seeding into Scaffolds Improves Bone Formation

Bone marrow stromal cells (BMSCs)/β-tricalcium phosphate (β-TCP) composites have attracted a great deal of attention in bone tissue engineering. If more effective bone regeneration is to be achieved, efficient cell-seeding systems need to be clarified. In this study, we investigated the number of cells contained in composites, and the in vitro/vivo osteogenic differentiation capacity of composites using 4 conventional systems of seeding rat BMSCs into β-TCP: soak, low-pressure, pipette, and syringe systems. The highest number of cells was contained in the composites from the syringe group. Moreover, after two-week osteogenic induction in vitro, the composites in the syringe group exhibited the highest osteogenic potential, which continued at 8 weeks after subcutaneous implantation in vivo. Our results indicated that efficient and appropriate cell-seeding could improve in vitro/vivo bone formation in composites and thus make a potential clinical contribution to successful bone tissue engineering. Abbreviations: BMSCs, bone marrow stromal cells; β-TCP, β-tricalcium phosphate; S-D, Sprague-Dawley; kPa, kilopascal; ALP, alkaline phosphatase; N, Newton; DNA, deoxyribonucleic acid; OCN, osteocalcin; ANOVA, analysis of variance; PLSD, protected least-significant difference; and HE, hematoxylin and eosin.

Ability of polyurethane foams to support cell proliferation and the differentiation of MSCs into osteoblasts

In bone tissue reconstruction, the use of engineered constructs created by mesenchymal stem cells (MSCs) that differentiate and proliferate into three-dimensional porous scaffolds is an appealing alternative to autologous and heterologous bone grafts. Scaffolds considered in this work are represented by polyurethane (PU) foams. Two PU foams (EC-1 and EC-2) were synthesized and characterized for morphology, mechanical properties and in vitro interaction with the osteoblast-like cell line MG63 and MSCs from human bone marrow. EC-1 and EC-2 showed similar densities (0.20 g cm(-3)) with different morphologies: EC-1 showed a more homogeneous pore size (average Phi = 691 microm) and distribution, with a 35% open porosity, whereas EC-2 evidenced a wide range of pore dimension, with an average pore size of 955 microm and a 74% open porosity. The compressive properties of the two foams were similar in the dry condition and both showed a strong decrease in the wet condition. In vitro tests showed good MG63 cell proliferation, as confirmed by the results of the MTT assay and scanning electron microscopy (SEM) observations, with a higher cell viability on EC-2 foam 7 days post-seeding. In the experiments with MSCs, SEM observations showed the presence of an inorganic phase deposition starting day 7 onto EC-1, day 14 onto EC-2. The inorganic particles (CaP) deposition was much more evident onto the pore surface of both foams at day 30, indicating good differentiation of MSCs into osteoblasts. Both PU foams therefore appeared to stimulate cell adhesion and proliferation in vitro, sustaining the MSCs' growth and differentiation into osteoblasts.

Cyclic arginine-glycine-aspartate peptides enhance three-dimensional stem cell osteogenic differentiation

The role of morphogens in bone regeneration has been widely studied, whereas the effect of matrix cues, particularly on stem cell differentiation, are less well understood. In this work, we investigated the effects of arginine-glycine-aspartate (RGD) ligand conformation (linear vs cyclic RGD) on primary human bone marrow stromal cell (hBMSC) and D1 stem cell osteogenic differentiation in three-dimensional (3D) culture and compared their response with that of committed MC3T3-E1 preosteoblasts to determine whether the stage of cell differentiation altered the response to the adhesion ligands. Linear RGD densities that promoted osteogenic differentiation of committed cells (MC3T3-E1 preosteoblasts) did not induce differentiation of hBMSCs or D1 stem cells, although matrices presenting the cyclic form of this adhesion ligand enhanced osteoprogenitor differentiation in 3D culture. This may be due to enhanced integrin-ligand binding. These studies indicate that biomaterial design parameters optimized for differentiated cell types may not directly translate to stem cell populations, because less-committed cells may require more instruction than differentiated cells. It is likely that design of synthetic extracellular matrices tailored to promote stem cell differentiation may enhance bone regeneration by transplanted cells.

Fresh bone marrow introduction into porous scaffolds using a simple low-pressure loading method for effective osteogenesis in a rabbit model

Recent advances in tissue engineering techniques have allowed porous biomaterials to be combined with osteogenic cells for effective bone regeneration. We developed a simple low-pressure cell-loading method using only syringes and stopcocks, and examined the effect of this method on osteogenesis when applied to the combination of highly porous beta-tricalcium phosphate (beta-TCP) and fresh autologous bone marrow. Both block and granule beta-TCP scaffolds were used to prepare implants in three different ways: without bone marrow as a control, with bone marrow that was allowed to penetrate spontaneously under atmospheric pressure (AP group), and with bone marrow that was seeded under low pressure (ULP group). These implants were transplanted into rabbit intramuscular sites, and the samples were examined biologically and histologically. The penetration efficiency of the block implants after marrow introduction was significantly higher in the ULP group than in the AP group. In the transplanted block samples, alkaline phosphatase activity was significantly higher in the ULP group at 2 weeks after implantation, and significantly more newly formed bone was observed in the ULP group at both 5 and 10 weeks compared with the AP group. Similar results were observed even in the experiment using beta-TCP granules, which are smaller than the blocks and frequently used clinically. Because of its convenience and safety, this low-pressure method might be a novel, effective treatment to promote osteogenesis with bone marrow in clinical bone reconstruction surgeries.