1
|
Sandell M, Chireh A, Spyrou A, Grankvist R, Al-Saadi J, Jonsson S, van der Wijngaart W, Stemme G, Holmin S, Roxhed N. Endovascular Device for Endothelial Cell Sampling. ADVANCED NANOBIOMED RESEARCH 2022. [DOI: 10.1002/anbr.202200023] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022] Open
Affiliation(s)
- Mikael Sandell
- Division of Micro and Nanosystems KTH Royal Institute of Technology Malvinas väg 10 114 28 Stockholm Sweden
- Department of Clinical Neuroscience Karolinska Institutet Tomtebodavägen 18A 171 77 Stockholm Sweden
- MedTechLabs Bioclinicum Karolinska University Hospital 171 64 Solna Sweden
| | - Arvin Chireh
- Department of Clinical Neuroscience Karolinska Institutet Tomtebodavägen 18A 171 77 Stockholm Sweden
| | - Argyris Spyrou
- Division of Micro and Nanosystems KTH Royal Institute of Technology Malvinas väg 10 114 28 Stockholm Sweden
- MedTechLabs Bioclinicum Karolinska University Hospital 171 64 Solna Sweden
| | - Rikard Grankvist
- Department of Clinical Neuroscience Karolinska Institutet Tomtebodavägen 18A 171 77 Stockholm Sweden
| | - Jonathan Al-Saadi
- Department of Clinical Neuroscience Karolinska Institutet Tomtebodavägen 18A 171 77 Stockholm Sweden
| | - Stefan Jonsson
- Department of Materials Science and Engineering KTH Royal Institute of Technology Brinellvägen 23 100 44 Stockholm Sweden
| | - Wouter van der Wijngaart
- Division of Micro and Nanosystems KTH Royal Institute of Technology Malvinas väg 10 114 28 Stockholm Sweden
| | - Göran Stemme
- Division of Micro and Nanosystems KTH Royal Institute of Technology Malvinas väg 10 114 28 Stockholm Sweden
| | - Staffan Holmin
- Department of Clinical Neuroscience Karolinska Institutet Tomtebodavägen 18A 171 77 Stockholm Sweden
- MedTechLabs Bioclinicum Karolinska University Hospital 171 64 Solna Sweden
| | - Niclas Roxhed
- Division of Micro and Nanosystems KTH Royal Institute of Technology Malvinas väg 10 114 28 Stockholm Sweden
- MedTechLabs Bioclinicum Karolinska University Hospital 171 64 Solna Sweden
| |
Collapse
|
2
|
Tevlek A, Topuz B, Akbay E, Aydin HM. Surface channel patterned and endothelialized poly(glycerol sebacate) based elastomers. J Biomater Appl 2022; 37:287-302. [DOI: 10.1177/08853282221085798] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Prevascularization of tissue equivalents is critical for fulfilling the need for sufficient vascular organization for nutrient and gas transport. Hence, endothelial cell culture on biomaterials is of great importance for researchers. Numerous alternate strategies have been suggested in this sense, with cell-based methods being the most commonly employed. In this study, poly (glycerol sebacate) (PGS) elastomers with varying crosslinking ratios were synthesized and their surfaces were patterned with channels by using laser ablation technique. In order to determine an ideal material for cell culture studies, the elastomers were subsequently mechanically, chemically, and biologically characterized. Following that, human umbilical vein endothelial cells (HUVECs) were seeded into the channels established on the PGS membranes and cultured under various culture conditions to establish the optimal culture parameters. Lastly, the endothelial cell responses to the synthesized PGS elastomers were evaluated. Remarkable cell proliferation and impressive cellular organizations were noticed on the constructs created as part of the investigation. On the concrete output of this research, arrangements in various geometries can be created by laser ablation method and the effects of various molecules, drugs or agents on endothelial cells can be evaluated. The platforms produced can be employed as an intermediate biomaterial layer containing endothelial cells for vascularization of tissue-engineered structures, particularly in layer-by-layer tissue engineering approaches.
Collapse
Affiliation(s)
- Atakan Tevlek
- Institute of Science, Bioengineering Division, Hacettepe University, Ankara, Turkey
| | - Bengisu Topuz
- Institute of Science, Bioengineering Division, Hacettepe University, Ankara, Turkey
| | - Esin Akbay
- Faculty of Science, Department of Biology, Hacettepe University, Ankara, Turkey
| | - Halil Murat Aydin
- Institute of Science, Bioengineering Division, Hacettepe University, Ankara, Turkey
- Centre for Bioengineering, Hacettepe University, Ankara, Turkey§Current Affiliation: METU MEMS Center, Ankara, Turkey
| |
Collapse
|
3
|
Liang B, Shi Q, Xu J, Chai YM, Xu JG. Poly (Glycerol Sebacate)-Based Bio-Artificial Multiporous Matrix for Bone Regeneration. Front Chem 2020; 8:603577. [PMID: 33330398 PMCID: PMC7719816 DOI: 10.3389/fchem.2020.603577] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2020] [Accepted: 10/26/2020] [Indexed: 12/13/2022] Open
Abstract
In recent years, bone repair biomaterials that combine cells and bioactive factors are superior to autologous and allogeneic bone implants. However, neither natural nor synthetic biomaterials can possess all desired qualities such as strength, porosity, and biological activity. In this study, we used poly (glycerol sebacate) (PGS), a synthetic material with great osteogenic potential that has attracted more attention in the field of tissue (such as bone tissue) regeneration owing to its good biocompatibility and high elasticity. It also has the advantage of being regulated by material synthesis to match the bone tissue's strength and can be easily modified to become functional. However, pure PGS lacks functional groups and hydrophilicity. Therefore, we used PGS as the substrate to graft the adhesive ligands RGD and vascular endothelial growth factor mimetic peptide. The bone repair scaffold can be prepared through photo crosslinking, as it not only improves hydrophobicity but also promotes vascularization and accelerates osteogenesis. Simultaneously, we improved the preparation method of hydrogels after freeze-drying and crosslinking to form a sponge-like structure and to easily regenerate blood vessels. In summary, a bone repair scaffold was prepared to meet the structural and biological requirements. It proved to serve as a potential bone-mimicking scaffold by enhancing tissue regenerative processes such as cell infiltration and vascularization and subsequent replacement by the native bone tissue.
Collapse
Affiliation(s)
| | | | | | | | - Jian-Guang Xu
- Department of Orthopedic Surgery, Shanghai Jiao Tong University Affiliated Sixth People's Hospital, Shanghai, China
| |
Collapse
|
4
|
Watanabe M, Yano K, Okawa K, Yamashita T, Tajima K, Sawada K, Yagi H, Kitagawa Y, Tanishita K, Sudo R. Construction of sinusoid-scale microvessels in perfusion culture of a decellularized liver. Acta Biomater 2019; 95:307-318. [PMID: 30593886 DOI: 10.1016/j.actbio.2018.12.042] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2018] [Revised: 12/20/2018] [Accepted: 12/21/2018] [Indexed: 12/20/2022]
Abstract
There is a great deal of demand for the construction of transplantable liver grafts. Over the last decade, decellularization techniques have been developed to construct whole liver tissue grafts as potential biomaterials. However, the lack of intact vascular networks, especially sinusoids, in recellularized liver scaffolds leads to hemorrhage and thrombosis after transplantation, which is a major obstacle to the development of transplantable liver grafts. In the present study, we hypothesized that both mechanical (e.g., fluid shear stress) and chemical factors (e.g., fibronectin coating) can enhance the formation of hierarchical vascular networks including sinusoid-scale microvessels. We demonstrated that perfusion culture promoted formation of sinusoid-scale microvessels in recellularized liver scaffolds, which was not observed in static culture. In particular, perfusion culture at 4.7 ml/min promoted the formation of sinusoid-scale microvessels compared to perfusion culture at 2.4 and 9.4 ml/min. In addition, well-aligned endothelium was observed in perfusion culture, suggesting that endothelial cells sensed the flow-induced shear stress. Moreover, fibronectin coating of decellularized liver scaffolds enhanced the formation of sinusoid-scale microvessels in perfusion culture at 4.7 ml/min. This study represents a critical step in the development of functional recellularized liver scaffolds, which can be used not only for transplantation but also for drug screening and disease-modeling studies. STATEMENT OF SIGNIFICANCE: Decellularized liver scaffolds are promising biomaterials that allow production of large-scale tissue-engineered liver grafts. However, it is difficult to maintain recellularized liver grafts after transplantation due to hemorrhage and thrombosis. To overcome this obstacle, construction of an intact vascular network including sinusoid-scale microvessels is essential. In the present study, we succeeded in constructing sinusoid-scale microvessels in decellularized liver scaffolds via a combination of perfusion culture and surface coating. We further confirmed that endothelial cells in decellularized liver scaffolds responded to flow-derived mechanical stress by aligning actin filaments. Our strategy to construct sinusoid-scale microvessels is critical for the development of intact vascular networks, and addresses the limitations of recellularized liver scaffolds after transplantation.
Collapse
Affiliation(s)
- Masafumi Watanabe
- Department of System Design Engineering, Keio University, Kohoku-ku, Yokohama 223-8522, Japan
| | - Koki Yano
- Department of System Design Engineering, Keio University, Kohoku-ku, Yokohama 223-8522, Japan
| | - Koki Okawa
- Department of System Design Engineering, Keio University, Kohoku-ku, Yokohama 223-8522, Japan
| | - Tadahiro Yamashita
- Department of System Design Engineering, Keio University, Kohoku-ku, Yokohama 223-8522, Japan
| | - Kazuki Tajima
- Department of Surgery, Keio University School of Medicine, Shunjuku-ku, Tokyo 160-8582, Japan
| | - Kazuaki Sawada
- Collaborative Research Resources, Keio University School of Medicine, Shunjuku-ku, Tokyo 160-8582, Japan
| | - Hiroshi Yagi
- Department of Surgery, Keio University School of Medicine, Shunjuku-ku, Tokyo 160-8582, Japan
| | - Yuko Kitagawa
- Department of Surgery, Keio University School of Medicine, Shunjuku-ku, Tokyo 160-8582, Japan
| | - Kazuo Tanishita
- Research Organization for Nano & Life Innovation, Waseda University, Shunjuku-ku, Tokyo 162-0041, Japan
| | - Ryo Sudo
- Department of System Design Engineering, Keio University, Kohoku-ku, Yokohama 223-8522, Japan.
| |
Collapse
|
5
|
Du P, Casavitri C, Suhaeri M, Wang PY, Lee JH, Koh WG, Park K. A Fibrous Hybrid Patch Couples Cell-Derived Matrix and Poly(l-lactide-co-caprolactone) for Endothelial Cells Delivery and Skin Wound Repair. ACS Biomater Sci Eng 2018; 5:900-910. [DOI: 10.1021/acsbiomaterials.8b01118] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Affiliation(s)
- Ping Du
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
- Center for Human Tissues & Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Cininta Casavitri
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
- Division of Bio-Medical Science and Technology, KIST School, Korea University of Science and Technology (UST), Seoul 02792, Republic of Korea
| | - Muhammad Suhaeri
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
| | - Peng-Yuan Wang
- Center for Human Tissues & Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, Guangdong 518055, China
| | - Jong Ho Lee
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
| | - Won-Gun Koh
- Department of Chemical and Biomolecular Engineering, Yonsei University, Seodaemun-gu, Seoul 03722, Republic of Korea
| | - Kwideok Park
- Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
- Division of Bio-Medical Science and Technology, KIST School, Korea University of Science and Technology (UST), Seoul 02792, Republic of Korea
| |
Collapse
|
6
|
Kook YM, Kim H, Kim S, Heo CY, Park MH, Lee K, Koh WG. Promotion of Vascular Morphogenesis of Endothelial Cells Co-Cultured with Human Adipose-Derived Mesenchymal Stem Cells Using Polycaprolactone/Gelatin Nanofibrous Scaffolds. NANOMATERIALS (BASEL, SWITZERLAND) 2018; 8:E117. [PMID: 29463042 PMCID: PMC5853748 DOI: 10.3390/nano8020117] [Citation(s) in RCA: 32] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/31/2018] [Revised: 02/10/2018] [Accepted: 02/13/2018] [Indexed: 12/15/2022]
Abstract
New blood vessel formation is essential for tissue regeneration to deliver oxygen and nutrients and to maintain tissue metabolism. In the field of tissue engineering, in vitro fabrication of new artificial vessels has been a longstanding challenge. Here we developed a technique to reconstruct a microvascular system using a polycaprolactone (PCL)/gelatin nanofibrous structure and a co-culture system. Using a simple electrospinning process, we fabricated three-dimensional mesh scaffolds to support the sprouting of human umbilical vein endothelial cells (HUVECs) along the electrospun nanofiber. The co-culture with adipose-derived mesenchymal stem cells (ADSCs) supported greater sprouting of endothelial cells (ECs). In a two-dimensional culture system, angiogenic cell assembly produced more effective direct intercellular interactions and paracrine signaling from ADSCs to assist in the vascular formation of ECs, compared to the influence of growth factor. Although vascular endothelial growth factor and sphingosine-1-phosphate were present during the culture period, the presence of ADSCs was the most important factor for the construction of a cell-assembled structure in the two-dimensional culture system. On the contrary, HUVECs co-cultured on PCL/gelatin nanofiber scaffolds produced mature and functional microvessel and luminal structures with a greater expression of vascular markers, including platelet endothelial cell adhesion molecule-1 and podocalyxin. Furthermore, both angiogenic factors and cellular interactions with ADSCs through direct contact and paracrine molecules contributed to the formation of enhanced engineered blood vessel structures. It is expected that the co-culture system of HUVECs and ADSCs on bioengineered PCL/gelatin nanofibrous scaffolds will promote robust and functional microvessel structures and will be valuable for the regeneration of tissue with restored blood vessels.
Collapse
Affiliation(s)
- Yun-Min Kook
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 120-749, Korea.
| | - Hyerim Kim
- Program in Nanoscience and Technology, Graduate School of Convergence Science and Technology, Seoul National University, Seoul 08826, Korea.
| | - Sujin Kim
- Program in Nanoscience and Technology, Graduate School of Convergence Science and Technology, Seoul National University, Seoul 08826, Korea.
| | - Chan Yeong Heo
- Department of Plastic and Reconstructive Surgery, Seoul National University College of Medicine, Seoul 03080, Korea.
- Department of Plastic and Reconstructive Surgery, Seoul National University Bundang Hospital, Seongman 13620, Korea.
| | - Min Hee Park
- Program in Nanoscience and Technology, Graduate School of Convergence Science and Technology, Seoul National University, Seoul 08826, Korea.
| | - Kangwon Lee
- Program in Nanoscience and Technology, Graduate School of Convergence Science and Technology, Seoul National University, Seoul 08826, Korea.
- Advanced Institutes of Convergence Technology, Gyeonggi-do 16229, Korea.
| | - Won-Gun Koh
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 120-749, Korea.
| |
Collapse
|
7
|
|
8
|
Zhang X, Li W. [Research process of the preparation of electrostatic spinning of poly-glycerol sebacate and the application in tissue engineering]. HUA XI KOU QIANG YI XUE ZA ZHI = HUAXI KOUQIANG YIXUE ZAZHI = WEST CHINA JOURNAL OF STOMATOLOGY 2015; 33:539-542. [PMID: 26688952 PMCID: PMC7030315 DOI: 10.7518/hxkq.2015.05.021] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Subscribe] [Scholar Register] [Received: 03/15/2015] [Revised: 06/20/2015] [Indexed: 06/05/2023]
Abstract
Poly-glycerol sebacate (PGS) is a novel biodegradable elastomer, it has been widely applied in the biomedical fields of heart, blood vessel and cartilage owing to its excellent biological performance, mechanical property and degradability. Electrostatic spinning is a preparation method of tissue engineering scaffolds with the characteristics of convenience, processing controllability and cost efficiency. In this paper, the author reviewed the research process of electrostatic spinning preparation and the application in the field of tissue engineering.
Collapse
|
9
|
Fuchsluger T, Salehi S, Petsch C, Bachmann B. Neue Möglichkeiten der Augenoberflächenrekonstruktion. Ophthalmologe 2014; 111:1019-26. [DOI: 10.1007/s00347-013-3010-z] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
10
|
Salehi S, Bahners T, Gutmann JS, Gao SL, Mäder E, Fuchsluger TA. Characterization of structural, mechanical and nano-mechanical properties of electrospun PGS/PCL fibers. RSC Adv 2014. [DOI: 10.1039/c4ra01237b] [Citation(s) in RCA: 61] [Impact Index Per Article: 6.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Structural and mechanical properties of aligned PGS/PCL nanofibers for cornea tissue engineering are studied and compared to natural corneal stroma.
Collapse
Affiliation(s)
- S. Salehi
- Deutsches Textilforschungszentrum Nord-West gGmbH
- 47798 Krefeld, Germany
- Augenklinik
- Universitätsklinikum Düsseldorf
- Heinrich-Heine-Universität
| | - T. Bahners
- Deutsches Textilforschungszentrum Nord-West gGmbH
- 47798 Krefeld, Germany
| | - J. S. Gutmann
- Deutsches Textilforschungszentrum Nord-West gGmbH
- 47798 Krefeld, Germany
- Physikalische Chemie
- Universität Duisburg-Essen
- 45141 Essen, Germany
| | - S.-L. Gao
- Leibniz Institut für Polymerforschung e.V
- D-01069 Dresden, Germany
| | - E. Mäder
- Leibniz Institut für Polymerforschung e.V
- D-01069 Dresden, Germany
| | - T. A. Fuchsluger
- Augenklinik
- Universitätsklinikum Düsseldorf
- Heinrich-Heine-Universität
- 40225 Düsseldorf, Germany
| |
Collapse
|
11
|
Li X, Mearns SM, Martins-Green M, Liu Y. Procedure for the development of multi-depth circular cross-sectional endothelialized microchannels-on-a-chip. J Vis Exp 2013:e50771. [PMID: 24193102 DOI: 10.3791/50771] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2023] Open
Abstract
Efforts have been focused on developing in vitro assays for the study of microvessels because in vivo animal studies are more time-consuming, expensive, and observation and quantification are very challenging. However, conventional in vitro microvessel assays have limitations when representing in vivo microvessels with respect to three-dimensional (3D) geometry and providing continuous fluid flow. Using a combination of photolithographic reflowable photoresist technique, soft lithography, and microfluidics, we have developed a multi-depth circular cross-sectional endothelialized microchannels-on-a-chip, which mimics the 3D geometry of in vivo microvessels and runs under controlled continuous perfusion flow. A positive reflowable photoresist was used to fabricate a master mold with a semicircular cross-sectional microchannel network. By the alignment and bonding of the two polydimethylsiloxane (PDMS) microchannels replicated from the master mold, a cylindrical microchannel network was created. The diameters of the microchannels can be well controlled. In addition, primary human umbilical vein endothelial cells (HUVECs) seeded inside the chip showed that the cells lined the inner surface of the microchannels under controlled perfusion lasting for a time period between 4 days to 2 weeks.
Collapse
Affiliation(s)
- Xiang Li
- Lane Department of Computer Science and Electrical Engineering, West Virginia University
| | | | | | | |
Collapse
|
12
|
A biodegradable microvessel scaffold as a framework to enable vascular support of engineered tissues. Biomaterials 2013; 34:10007-15. [PMID: 24079890 DOI: 10.1016/j.biomaterials.2013.09.039] [Citation(s) in RCA: 53] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/20/2013] [Accepted: 09/11/2013] [Indexed: 11/21/2022]
Abstract
A biodegradable microvessel scaffold comprised of distinct parenchymal and vascular compartments separated by a permeable membrane interface was conceptualized, fabricated, cellularized, and implanted. The device was designed with perfusable microfluidic channels on the order of 100 μm to mimic small blood vessels, and high interfacial area to an adjacent parenchymal space to enable transport between the compartments. Poly(glycerol sebacate) (PGS) elastomer was used to construct the microvessel framework, and various assembly methods were evaluated to ensure robust mechanical integrity. In vitro studies demonstrated the differentiation of human skeletal muscle cells cultured in the parenchymal space, a 90% reduction in muscle cell viability due to trans-membrane transport of a myotoxic drug from the perfusate, and microvessel seeding with human endothelial cells. In vivo studies of scaffolds implanted subcutaneously and intraperitoneally, without or with exogenous cells, into nude rats demonstrated biodegradation of the membrane interface and host blood cell infiltration of the microvessels. This modular, implantable scaffold could serve as a basis for building tissue constructs of increasing scale and clinical relevance.
Collapse
|
13
|
Yu HS, Won JE, Jin GZ, Kim HW. Construction of mesenchymal stem cell-containing collagen gel with a macrochanneled polycaprolactone scaffold and the flow perfusion culturing for bone tissue engineering. Biores Open Access 2013; 1:124-36. [PMID: 23515189 PMCID: PMC3559226 DOI: 10.1089/biores.2012.0234] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/14/2023] Open
Abstract
A novel bone tissue-engineering construct was developed by using poly(ɛ-caprolactone) (PCL)-macrochanneled scaffolds combined with stem cell-seeded collagen hydrogels and then applying flow perfusion culture. Rat mesenchymal stem cells (MSCs) were loaded into collagen hydrogels, which were then combined with macrochanneled PCL scaffolds. Collagen hydrogels were demonstrated to provide favorable growth environments for MSCs and to foster proliferation. Cell number determination identified retention of substantially fewer (50–60%) cells when they were seeded directly onto macrochanneled PCL than of cells engineered within collagen hydrogels. Additionally, the cells actively proliferated within the combined scaffold for up to 7 days. MSC-loaded collagen–PCL scaffolds were subsequently cultured under flow perfusion to promote proliferation and osteogenic differentiation. Cells proliferated to levels significantly higher in flow perfusion culture than that under static conditions during 21 days. A quantitative polymerase chain reaction (QPCR) assay revealed significant alterations in the transcription of bone-related genes such as osteopontin (OPN), osteocalcin (OCN), and bone sialoprotein (BSP), such as 8-, 2.5-, and 3-fold induction, respectively, after 10 days of flow perfusion relative to those in static culture. OPN and OCN protein levels, as determined by Western blot, increased under flow perfusion. Cellular mineralization was significantly enhanced by the flow perfusion during 21 and 28 days. Analyses of mechanosensitive gene expression induced by flow perfusion shear stress revealed significant upregulation of c-fos and cyclooxygenase-2 (COX-2) during the initial culture period (3–5 days), suggesting that osteogenic stimulation was possible as a result of mechanical force-driven transduction. These results provide valuable information for the design of a new bone tissue-engineering system by combining stem cell-loaded collagen hydrogels with macrochanneled scaffolds in flow perfusion culture.
Collapse
Affiliation(s)
- Hye-Sun Yu
- Department of Nanobiomedical Science and WCU Research Center, Dankook University Graduate School, Dankook University , Cheonan, South Korea . ; Institute of Tissue Regeneration Engineering (ITREN), Dankook University , Cheonan, South Korea
| | | | | | | |
Collapse
|
14
|
Shevach M, Maoz BM, Feiner R, Shapira A, Dvir T. Nanoengineering gold particle composite fibers for cardiac tissue engineering. J Mater Chem B 2013; 1:5210-5217. [DOI: 10.1039/c3tb20584c] [Citation(s) in RCA: 110] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/24/2022]
|
15
|
Marsano A, Maidhof R, Luo J, Fujikara K, Konofagou EE, Banfi A, Vunjak-Novakovic G. The effect of controlled expression of VEGF by transduced myoblasts in a cardiac patch on vascularization in a mouse model of myocardial infarction. Biomaterials 2012; 34:393-401. [PMID: 23083931 DOI: 10.1016/j.biomaterials.2012.09.038] [Citation(s) in RCA: 68] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/16/2012] [Accepted: 09/17/2012] [Indexed: 12/16/2022]
Abstract
Key requirements for cardiac tissue engineering include the maintenance of cell viability and function and the establishment of a perfusable vascular network in millimeters thick and compact cardiac constructs upon implantation. We investigated if these requirements can be met by providing an intrinsic vascularization stimulus (via sustained action of VEGF secreted at a controlled rate by transduced myoblasts) to a cardiac patch engineered under conditions of effective oxygen supply (via medium flow through channeled elastomeric scaffolds seeded with neonatal cardiomyocytes). We demonstrate that this combined approach resulted in increased viability, vascularization and functionality of the cardiac patch. After implantation in a mouse model of myocardial infarction, VEGF-expressing patches displayed significantly improved engraftment, survival and differentiation of cardiomyocytes, leading to greatly enhanced contractility as compared to controls not expressing VEGF. Controlled VEGF expression also mediated the formation of mature vascular networks, both within the engineered patches and in the underlying ischemic myocardium. We propose that this combined cell-biomaterial approach can be a promising strategy to engineer cardiac patches with intrinsic and extrinsic vascularization potential.
Collapse
Affiliation(s)
- Anna Marsano
- Columbia University, Department of Biomedical Engineering, New York, NY 10032, USA
| | | | | | | | | | | | | |
Collapse
|
16
|
Sundback CA, McFadden J, Hart A, Kulig KM, Wieland AM, Pereira MJN, Pomerantseva I, Hartnick CJ, Masiakos PT. Behavior of poly(glycerol sebacate) plugs in chronic tympanic membrane perforations. J Biomed Mater Res B Appl Biomater 2012; 100:1943-54. [PMID: 22821822 DOI: 10.1002/jbm.b.32761] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/23/2011] [Revised: 04/23/2012] [Accepted: 05/15/2012] [Indexed: 12/11/2022]
Abstract
The tympanic membrane (TM), separating the external and middle ear, consists of fibrous connective tissue sandwiched between epithelial layers. To treat chronic ear infections, tympanostomy drainage tubes are placed in surgically created holes in TMs which can become chronic perforations upon extrusion. Perforations are repaired using a variety of techniques, but are limited by morbidity, unsatisfactory closure rates, or minimal regeneration of the connective tissue. A more effective, minimally-invasive therapy is necessary to enhance the perforation closure rate. Current research utilizing decellularized or alignate materials moderately enhance closure but the native TM architecture is not restored. Poly(glycerol sebacate) (PGS) is a biocompatible elastomer which supports cell migration and enzymatically degrades in contact with vascularized tissue. PGS spool-shaped plugs were manufactured using a novel process. Using minimally invasive procedures, these elastomeric plugs were inserted into chronic chinchilla TM perforations. As previously reported, effective perforation closure occurred as both flange surfaces were covered by confluent cell layers; >90% of perforations were closed at 6-week postimplantation. This unique in vivo environment has little vascularized tissue. Consequently, PGS degradation was minimal over 16-week implantation, hindering regeneration of the TM fibrous connective tissue. PGS degradation must be enhanced to promote complete TM regeneration.
Collapse
Affiliation(s)
- C A Sundback
- Center for Regenerative Medicine, Department of Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, Massachusetts 02114, USA.
| | | | | | | | | | | | | | | | | |
Collapse
|
17
|
Szöke K, Beckstrøm KJ, Brinchmann JE. Human Adipose Tissue as a Source of Cells with Angiogenic Potential. Cell Transplant 2012; 21:235-50. [DOI: 10.3727/096368911x580518] [Citation(s) in RCA: 54] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022] Open
Abstract
Endothelial cells (ECs) are involved in the process of angiogenesis, the outgrowth of new vessels from preexisting blood vessels. If available in sufficiently large numbers, ECs could be used therapeutically to establish blood flow through in vitro engineered tissues and tissues suffering from severe ischemia. Adipose tissue (AT) is an easily available source of large number of autologous ECs. Here we describe the isolation, in vitro expansion, and characterization of human AT derived ECs (AT-ECs). AT-ECs proliferated rapidly through 15–20 population doublings. The cultured cells showed cobblestone morphology and expressed EC markers including CD31, CD144, eNOS, CD309, CD105, von Willebrand factor, CD146, CD54, and CD102. They bound Ulex europaeus agglutinin I lectin and took up DiI-Ac-LDL. The AT-ECs formed capillary-like tubes in Matrigel in vitro and formed functional blood vessels in Matrigel following subcutaneous injection into immunodeficient mice. In conclusion, AT-ECs reach clinically significant cell numbers after few population doublings and are easily accessible from autologous AT, which also contains mesenchymal stem cells/pericytes. Thus, AT yields two cell populations that may be used together in the treatment of tissue ischemia and in clinical applications of tissue engineering.
Collapse
Affiliation(s)
- Krisztina Szöke
- Norwegian Center for Stem Cell Research, Institute of Immunology, Oslo University Hospital, Rikshospitalet and Institute of Basic Medical Sciences, University of Oslo, Oslo, Norway
| | - Karen Johanne Beckstrøm
- Norwegian Center for Stem Cell Research, Institute of Immunology, Oslo University Hospital, Rikshospitalet and Institute of Basic Medical Sciences, University of Oslo, Oslo, Norway
| | - Jan E. Brinchmann
- Norwegian Center for Stem Cell Research, Institute of Immunology, Oslo University Hospital, Rikshospitalet and Institute of Basic Medical Sciences, University of Oslo, Oslo, Norway
| |
Collapse
|
18
|
Maidhof R, Tandon N, Lee EJ, Luo J, Duan Y, Yeager K, Konofagou E, Vunjak-Novakovic G. Biomimetic perfusion and electrical stimulation applied in concert improved the assembly of engineered cardiac tissue. J Tissue Eng Regen Med 2011; 6:e12-23. [PMID: 22170772 DOI: 10.1002/term.525] [Citation(s) in RCA: 102] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2010] [Revised: 02/24/2011] [Accepted: 09/21/2011] [Indexed: 11/06/2022]
Abstract
Maintenance of normal myocardial function depends intimately on synchronous tissue contraction, driven by electrical activation and on adequate nutrient perfusion in support thereof. Bioreactors have been used to mimic aspects of these factors in vitro to engineer cardiac tissue but, due to design limitations, previous bioreactor systems have yet to simultaneously support nutrient perfusion, electrical stimulation and unconstrained (i.e. not isometric) tissue contraction. To the best of our knowledge, the bioreactor system described herein is the first to integrate these three key factors in concert. We present the design of our bioreactor and characterize its capability in integrated experimental and mathematical modelling studies. We then cultured cardiac cells obtained from neonatal rats in porous, channelled elastomer scaffolds with the simultaneous application of perfusion and electrical stimulation, with controls excluding either one or both of these two conditions. After 8 days of culture, constructs grown with simultaneous perfusion and electrical stimulation exhibited substantially improved functional properties, as evidenced by a significant increase in contraction amplitude (0.23 ± 0.10% vs 0.14 ± 0.05%, 0.13 ± 0.08% or 0.09 ± 0.02% in control constructs grown without stimulation, without perfusion, or either stimulation or perfusion, respectively). Consistently, these constructs had significantly improved DNA contents, cell distribution throughout the scaffold thickness, cardiac protein expression, cell morphology and overall tissue organization compared to control groups. Thus, the simultaneous application of medium perfusion and electrical conditioning enabled by the use of the novel bioreactor system may accelerate the generation of fully functional, clinically sized cardiac tissue constructs.
Collapse
Affiliation(s)
- Robert Maidhof
- Department of Biomedical Engineering, Columbia University, New York, NY 10032, USA
| | | | | | | | | | | | | | | |
Collapse
|
19
|
Pirlo RK, Wu P, Liu J, Ringeisen B. PLGA/hydrogel biopapers as a stackable substrate for printing HUVEC networks via BioLP. Biotechnol Bioeng 2011; 109:262-73. [PMID: 21830203 DOI: 10.1002/bit.23295] [Citation(s) in RCA: 49] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/13/2011] [Revised: 07/22/2011] [Accepted: 08/03/2011] [Indexed: 01/05/2023]
Abstract
Two major challenges in tissue engineering are mimicking the native cell-cell arrangements of tissues and maintaining viability of three-dimension (3D) tissues thicker than 300 µm. Cell printing and prevascularization of engineered tissues are promising approaches to meet these challenges. However, the printing technologies used in biofabrication must balance the competing parameters of resolution, speed, and volume, which limit the resolution of thicker 3D structures. We suggest that high-resolution conformal printing techniques can be used to print 2D patterns of vascular cells onto biopaper substrates which can then be stacked to form a thicker tissue construct. Towards this end we created 1 cm × 1 cm × 300 µm biopapers to be used as the transferable, stackable substrate for cell printing. 3.6% w/v poly-lactide-co-glycolide was dissolved in chloroform and poured into molds filled with NaCl crystals. The salt was removed with DI water and the scaffolds were dried and loaded with a Collagen Type I or Matrigel. SEM of the biopapers showed extensive porosity and gel loading throughout. Biological laser printing (BioLP) was used to deposit human umbilical vein endothelial cells (HUVEC) in a simple intersecting pattern to the surface of the biopapers. The cells differentiated and stretched to form networks preserving the printed pattern. In a separate experiment to demonstrate "stackability," individual biopapers were randomly seeded with HUVECs and cultured for 1 day. The mechanically stable and viable biopapers were then stacked and cultured for 4 days. Three-dimensional confocal microscopy showed cell infiltration and survival in the compound multilayer constructs. These results demonstrate the feasibility of stackable "biopapers" as a scaffold to build 3D vascularized tissues with a 2D cell-printing technique.
Collapse
Affiliation(s)
- Russell Kirk Pirlo
- National Research Council Research Associate, Washington, Districto of Columbia 20001, USA
| | | | | | | |
Collapse
|
20
|
The effects of preservation procedures on amniotic membrane's ability to serve as a substrate for cultivation of endothelial cells. Cryobiology 2011; 63:145-51. [PMID: 21884690 DOI: 10.1016/j.cryobiol.2011.08.003] [Citation(s) in RCA: 50] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2011] [Revised: 08/15/2011] [Accepted: 08/15/2011] [Indexed: 11/21/2022]
Abstract
Amniotic membrane (AM) has been used as a scaffold for the ex vivo expansion of different types of cells and a cell delivery matrix in regenerative medicine. Since the preservation procedures can influence the AM properties for experimental and clinical purposes, this study was established to investigate the feasibility of using the AM after different preservation methods to serve as substrates for endothelial cell expansion ex vivo. The effects of cryopreservation and lyophilization were evaluated on mechanical and histological characteristics of the AM, and the results were compared with the fresh AM. The ECM components of the basement membrane were well conserved in all groups. Although lyophilization resulted in more histological changes and lower level of physical variables including thickness, F(max), elongation at break and suture retention than the fresh and cryopreserved AM, endothelial cells grown on the lyophilized AM were better attached to the basement membrane. Cytotoxicity assay by MTT showed that the lyophilized AM is a compatible substrate for endothelial cells cultivation. The findings of this study suggest that the lyophilized AM is a suitable matrix for cultivation of endothelial cells due to this fact that lyophilization led to exposure of basement membrane of the AM.
Collapse
|
21
|
Khan OF, Sefton MV. Endothelialized biomaterials for tissue engineering applications in vivo. Trends Biotechnol 2011; 29:379-87. [PMID: 21549438 PMCID: PMC3140588 DOI: 10.1016/j.tibtech.2011.03.004] [Citation(s) in RCA: 59] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/14/2010] [Revised: 03/18/2011] [Accepted: 03/22/2011] [Indexed: 01/20/2023]
Abstract
Rebuilding tissues involves the creation of a vasculature to supply nutrients and this in turn means that the endothelial cells (ECs) of the resulting endothelium must be a quiescent non-thrombogenic blood contacting surface. Such ECs are deployed on biomaterials that are composed of natural materials such as extracellular matrix proteins or synthetic polymers in the form of vascular grafts or tissue-engineered constructs. Because EC function is influenced by their origin, biomaterial surface chemistry and hemodynamics, these issues must be considered to optimize implant performance. In this review, we examine the recent in vivo use of endothelialized biomaterials and discuss the fundamental issues that must be considered when engineering functional vasculature.
Collapse
Affiliation(s)
- Omar F Khan
- Department of Chemical Engineering and Applied Chemistry, University of Toronto, 200 College Street, Toronto, Ontario, M5S 3E5, Canada
| | | |
Collapse
|
22
|
Lee EJ, Niklason LE. A novel flow bioreactor for in vitro microvascularization. Tissue Eng Part C Methods 2011; 16:1191-200. [PMID: 20170423 DOI: 10.1089/ten.tec.2009.0652] [Citation(s) in RCA: 30] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022] Open
Abstract
Although the importance of fluid flow for proper vascular development and function in vivo is well recognized, microvascular formation in response to flow has not been well evaluated in a three-dimensional (3D) environment in vitro. In this study, we developed a novel 3D in vitro perfusion system that allows direct investigation of the effects of shear stress on the development of microvasculature in vitro. This system utilizes a 3D collagen gel for suspension of vascular cells and mesenchymal stem cells, through which flow is directly perfused. We characterized the flow conditions and demonstrate the impact of flow on the development of microvasculature using a coculture of endothelial cells and mesenchymal stem cells. With the unique ability to apply bulk flow through the collagen gels, and to estimate shear stress within the constructs, this perfusion system provides a flexible platform for developing a controllable biomimetic environment that can be adapted for a variety of investigations of microvascularization.
Collapse
Affiliation(s)
- Eun Jung Lee
- Department of Anesthesiology, Yale University, New Haven, CT 06520, USA
| | | |
Collapse
|
23
|
Marsano A, Maidhof R, Wan LQ, Wang Y, Gao J, Tandon N, Vunjak-Novakovic G. Scaffold stiffness affects the contractile function of three-dimensional engineered cardiac constructs. Biotechnol Prog 2011; 26:1382-90. [PMID: 20945492 DOI: 10.1002/btpr.435] [Citation(s) in RCA: 49] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
We investigated the effects of the initial stiffness of a three-dimensional elastomer scaffold--highly porous poly(glycerol sebacate)--on functional assembly of cardiomyocytes cultured with perfusion for 8 days. The polymer elasticity varied with the extent of polymer cross-links, resulting in three different stiffness groups, with compressive modulus of 2.35 ± 0.03 (low), 5.28 ± 0.36 (medium), and 5.99 ± 0.40 (high) kPa. Laminin coating improved the efficiency of cell seeding (from 59 ± 15 to 90 ± 21%), resulting in markedly increased final cell density, construct contractility, and matrix deposition, likely because of enhanced cell interaction and spreading on scaffold surfaces. Compact tissue was formed in the low and medium stiffness groups, but not in the high stiffness group. In particular, the low stiffness group exhibited the greatest contraction amplitude in response to electric field pacing, and had the highest compressive modulus at the end of culture. A mathematical model was developed to establish a correlation between the contractile amplitude and the cell distribution within the scaffold. Taken together, our findings suggest that the contractile function of engineered cardiac constructs positively correlates with low compressive stiffness of the scaffold.
Collapse
Affiliation(s)
- Anna Marsano
- Dept. of Biomedical Engineering, Columbia University, New York, NY 10032, USA
| | | | | | | | | | | | | |
Collapse
|
24
|
Maidhof R, Marsano A, Lee EJ, Vunjak-Novakovic G. Perfusion seeding of channeled elastomeric scaffolds with myocytes and endothelial cells for cardiac tissue engineering. Biotechnol Prog 2010; 26:565-72. [PMID: 20052737 DOI: 10.1002/btpr.337] [Citation(s) in RCA: 28] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
The requirements for engineering clinically sized cardiac constructs include medium perfusion (to maintain cell viability throughout the construct volume) and the protection of cardiac myocytes from hydrodynamic shear. To reconcile these conflicting requirements, we proposed the use of porous elastomeric scaffolds with an array of channels providing conduits for medium perfusion, and sized to provide efficient transport of oxygen to the cells, by a combination of convective flow and molecular diffusion over short distances between the channels. In this study, we investigate the conditions for perfusion seeding of channeled constructs with myocytes and endothelial cells without the gel carrier we previously used to lock the cells within the scaffold pores. We first established the flow parameters for perfusion seeding of porous elastomer scaffolds using the C2C12 myoblast line, and determined that a linear perfusion velocity of 1.0 mm/s resulted in seeding efficiency of 87% +/- 26% within 2 hours. When applied to seeding of channeled scaffolds with neonatal rat cardiac myocytes, these conditions also resulted in high efficiency (77.2% +/- 23.7%) of cell seeding. Uniform spatial cell distributions were obtained when scaffolds were stacked on top of one another in perfusion cartridges, effectively closing off the channels during perfusion seeding. Perfusion seeding of single scaffolds resulted in preferential cell attachment at the channel surfaces, and was employed for seeding scaffolds with rat aortic endothelial cells. We thus propose that these techniques can be utilized to engineer thick and compact cardiac constructs with parallel channels lined with endothelial cells.
Collapse
Affiliation(s)
- Robert Maidhof
- Dept. of Biomedical Engineering, Columbia University, New York, NY 10032, USA
| | | | | | | |
Collapse
|
25
|
Verseijden F, Posthumus-van Sluijs SJ, Farrell E, van Neck JW, Hovius SER, Hofer SOP, van Osch GJVM. Prevascular structures promote vascularization in engineered human adipose tissue constructs upon implantation. Cell Transplant 2010; 19:1007-20. [PMID: 20350354 DOI: 10.3727/096368910x492571] [Citation(s) in RCA: 61] [Impact Index Per Article: 4.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022] Open
Abstract
Vascularization is still one of the most important limitations for the survival of engineered tissues after implantation. In this study, we aim to improve the in vivo vascularization of engineered adipose tissue by preforming vascular structures within in vitro-engineered adipose tissue constructs that can integrate with the host vascular system upon implantation. Different cell culture media were tested and different amounts of human adipose tissue-derived mesenchymal stromal cells (ASC) and human umbilical vein endothelial cells (HUVEC) were combined in spheroid cocultures to obtain optimal conditions for the generation of prevascularized adipose tissue constructs. Immunohistochemistry revealed that prevascular structures were formed in the constructs only when 20% ASC and 80% HUVEC were combined and cultured in a 1:1 mixture of endothelial cell medium and adipogenic medium. Moreover, the ASC in these constructs accumulated lipid and expressed the adipocyte-specific gene fatty acid binding protein-4. Implantation of prevascularized ASC/HUVEC constructs in nude mice resulted in a significantly higher amount of vessels (37 ± 17 vessels/mm(2)) within the constructs compared to non-prevascularized constructs composed only of ASC (3 ± 4 vessels/mm(2)). Moreover, a subset of the preformed human vascular structures (3.6 ± 4.2 structures/mm(2)) anastomosed with the mouse vasculature as indicated by the presence of intravascular red blood cells. Our results indicate that preformed vascular structures within in vitro-engineered adipose tissue constructs can integrate with the host vascular system and improve the vascularization upon implantation.
Collapse
Affiliation(s)
- Femke Verseijden
- Department of Plastic and Reconstructive Surgery, Erasmus MC, University Medical Center Rotterdam, Rotterdam, The Netherlands.
| | | | | | | | | | | | | |
Collapse
|