On the stability of microwave-fabricated SERS substrates - chemical and morphological considerations

Sandwich-like CuNPs@AgNPs@PSB SERS substrates for sensitive detection of R6G and Forchlorfenuron

The development of a highly sensitive, synthetically simple and economical SERS substrate is technically very important. A fast, economical, sensitive and reproducible CuNPs@AgNPs@ Porous silicon Bragg reflector (PSB) SERS substrate was prepared by electrochemical etching and in situ reduction method. The developed CuNPs@AgNPs@PSB has a large specific surface area and abundant "hot spot" region, which makes the SERS performance excellent. Meanwhile, the successful synthesis of CuNPs@AgNPs can not only modulate the plasmon resonance properties of nanoparticles, but also effectively prolong the time stability of Cu nanoparticles. The basic performance of the substrate was evaluated using rhodamine 6G (R6G). (Detection limit reached 10-15 M, R2 = 0.9882, RSD = 5.3 %) The detection limit of Forchlorfenuron was 10 μg/L. The standard curve with a regression coefficient of 0.979 was established in the low concentration range of 10 μg/L -100 μg/L. This indicates that the prepared substrates can accomplish the detection of pesticide residues in the low concentration range. The prepared high-performance and high-sensitivity SERS substrate have a very promising application in detection technology.

Surface-Enhanced Raman Spectroscopy Substrate Time Stability Improvement Using an External Oxygen Barrier Method

The poor time stability of surface-enhanced Raman scattering (SERS) substrates greatly limits their application potential. Although core-shell structures are commonly used to enhance stability, their complex preparation processes, high costs, and susceptibility under acidic or alkaline conditions result in serious disadvantages for practical applications. Here, we propose a new method of external oxygen barrier to improve spectral stability, in which SERS substrates are stored in an oxygen-free environment. Controlled experiments are carried out under air and vacuum. Raman spectrum intensity is measured 11 times within six months for each group. Using the attenuation formula, the Raman spectrum intensity decay results of each SERS substrate over time are obtained. The effectiveness of the external oxygen barrier method is demonstrated through curve fitting using the corresponding function. The substrate spectral attenuation rates of the vacuum group and the argon group within six months are <20%, proving the effectiveness of the external oxygen barrier method.

A Three-Dimensional Hydrophobic Surface-Enhanced Raman Scattering Sensor via a Silver-Coated Polytetrafluoroethylene Membrane for the Direct Trace Detection of Molecules in Water

We report a three-dimensional (3D) SERS substrate consisting of a silver nanoparticle (AgNP) coating on the skeleton-fiber surfaces of a polytetrafluoroethylene (PTFE) membrane. Simple thermal evaporation was employed to deposit Ag onto the PTFE membrane to produce grape-shaped AgNPs. The 3D-distributed AgNPs exhibit not only strong localized surface plasmon resonance (LSPR) but also strong hydrophobic performance. High-density hotspots via silver nano-grape structures and nanogaps, the large 3D interaction volume, and the large total surface area, in combination with the hydrophobic enrichment of the specimen, facilitate high-sensitivity sensing performance of such a SERS substrate for the direct detection of low-concentration molecules in water. An enhancement factor of up to 1.97 × 1010 was achieved in the direct detection of R6G molecules in water with a concentration of 10-13 mol/L. The lowest detection limit of 100 ppt was reached in the detection of melamine in water. Such a SERS sensor may have potential applications in food-safety control, environmental water pollution monitoring, and biomedical analysis.

In Situ and Ex Situ Raman Studies of Cysteine’s Behavior on a Titanium Surface in Buffer Solution

In this paper, surface-enhanced Raman spectroscopy (SERS) was used to investigate the adsorption process of cysteine (Cys). Studies were carried out in the presence of phosphate-buffered saline solution (PBS), at pH 7.4, and acidified to pH 5, 3, and 1, on the surface of Ti for implant application. In situ SERS spectra obtained for the Cys/Ti solution system, after 24 h of immersion time, indicated that the buffer solution strongly influences the adsorption behavior of Cys on the Ti surface. This results in a decrease in Cys adsorption on the Ti surface, in the range of pH 7.4 to 3. The strong interaction between a sulfur atom of Cys and a Ti surface was observed only at pH = 1, under strongly acidic conditions. In contrast, ex situ SERS spectra recorded for the same samples but in a dried Cys/Ti system show a completely different behavior of Cys on the Ti surface. Formation of a disulfide (S-S) bond has occurred as a result of the dimerization or aggregation of Cys molecules on the Ti surface. Detailed analysis of the adsorption behavior of Cys on the Ti surface can be very important in the preparation of bioactive materials (i.e., coated by organic layers).