Stability and activity of platinum nanoparticles in the oxygen electroreduction reaction: is size or uniformity of primary importance?

Exploring the Potential of Bimetallic PtPd/C Cathode Catalysts to Enhance the Performance of PEM Fuel Cells

Bimetallic platinum-containing catalysts are deemed promising for electrolyzers and proton-exchange membrane fuel cells (PEMFCs). A significant number of laboratory studies and commercial offers are related to PtNi/C and PtCo/C electrocatalysts. The behavior of PtPd/C catalysts has been studied much less, although palladium itself is the metal closest to platinum in its properties. Using a series of characterization methods, this paper presents a comparative study of structural characteristics of the commercial PtPd/C catalysts containing 38% wt. of precious metals and the well-known HiSpec4000 Pt/C catalyst. The electrochemical behavior of the catalysts was studied both in a three-electrode electrochemical cell and in the membrane electrode assemblies (MEAs) of hydrogen-air PEMFCs. Both PtPd/C samples demonstrated higher values of the electrochemically active surface area, as well as greater specific and mass activity in the oxygen reduction reaction in comparison with conventional Pt/C, while not being inferior to the latter in durability. The MEA based on the best of the PtPd/C catalysts also exhibited higher performance in single tests and long-term durability testing. The results of this study conducted indicate the prospects of using bimetallic PtPd/C materials for cathode catalysts in PEMFCs.

The Development of High-Performance Platinum-Ruthenium Catalysts for the Methanol Oxidation Reaction: Gram-Scale Synthesis, Composition, Morphology, and Functional Characteristics

To obtain the PtRu/C electrocatalysts, the surfactant-free (wet) synthesis methods have been used. The structural-morphological characteristics and electrochemical behavior of the catalysts have been studied. The possibility of ranging the crystallite size from 1.2 to 4.5 nm using different reducing agents (ethylene glycol, ethanol, and isopropanol) has been shown. The effect of both the particles’ size and the mass fraction of the metal component on the electrochemical surface area (ESA), activity in the methanol electrooxidation reaction (MOR), and tolerance to its intermediate products has been studied. The simple and scalable surfactant-free synthesis method of the highly active PtRu/C electrocatalysts with a different mass fraction of metals, with their tolerance to intermediate products of the oxidation being 2.3 times higher than the commercial analogue, has been first proposed. The authors have succeeded in obtaining the PtRu/C catalysts with the nanoparticles’ size of less than 2 nm, characterized by the ultranarrow size and uniform spatial distributions over the support surface, thus having the ESA of more than 90 m2gPtRu−1.

Electrocatalytic oxygen reduction activity of AgCoCu oxides on reduced graphene oxide in alkaline media

Silver-based electrocatalysts as promising substitutes for platinum materials for cathodic oxygen electroreduction have been extensively researched. Electrocatalytic enhancement of the Ag nanoarchitectonics can be obtained via support structures and amalgamating Ag with one or two additional metals. The work presented here deals with a facile microwave-assisted synthesis to produce bimetallic Ag-Cu and Ag-Co (1:1) oxide nanoparticles (NPs) and trimetallic AgCuCo (0.6:1.5:1.5, 2:1:1, and 6:1:1) oxide NPs supported on a reduced graphene oxide (rGO) matrix. Morphology, composition, and functional groups were methodically analysed using various microscopic and spectroscopic techniques. The as-prepared electrocatalysts were employed as cathode substrates for the oxygen reduction reaction (ORR) in alkaline medium. Varying the Ag fraction in copper cobalt oxide has a significant influence on the ORR activity. At a ratio of 2:1:1, AgCuCo oxide NPs on rGO displayed the best values for onset potential, half-wave potential, and limiting current density (J _k) of 0.94 V vs RHE, 0.78 V, and 3.6 mA·cm^-2, respectively, with an electrochemical active surface area of 66.92 m²·g^-1 and a mass activity of 40.55 mA·mg^-1. The optimum electrocatalyst shows considerable electrochemical stability over 10,000 cycles in 0.1 M KOH solution.

Pd-Catalyzed Cross-Couplings: On the Importance of the Catalyst Quantity Descriptors, mol % and ppm

This Review examines parts per million (ppm) palladium concentrations in catalytic cross-coupling reactions and their relationship with mole percentage (mol %). Most studies in catalytic cross-coupling chemistry have historically focused on the concentration ratio between (pre)catalyst and the limiting reagent (substrate), expressed as mol %. Several recent papers have outlined the use of “ppm level” palladium as an alternative means of describing catalytic cross-coupling reaction systems. This led us to delve deeper into the literature to assess whether “ppm level” palladium is a practically useful descriptor of catalyst quantities in palladium-catalyzed cross-coupling reactions. Indeed, we conjectured that many reactions could, unknowingly, have employed low “ppm levels” of palladium (pre)catalyst, and generally, what would the spread of ppm palladium look like across a selection of studies reported across the vast array of the cross-coupling chemistry literature. In a few selected examples, we have examined other metal catalyst systems for comparison with palladium.