Transition-metal-catalyzed synthesis of phenols and aryl thiols

Direct C-H Sulfuration: Synthesis of Disulfides, Dithiocarbamates, Xanthates, Thiocarbamates and Thiocarbonates

In light of the important biological activities and widespread applications of organic disulfides, dithiocarbamates, xanthates, thiocarbamates and thiocarbonates, the continual persuit of efficient methods for their synthesis remains crucial. Traditionally, the preparation of such compounds heavily relied on intricate multi-step syntheses and the use of highly prefunctionalized starting materials. Over the past two decades, the direct sulfuration of C-H bonds has evolved into a straightforward, atom- and step-economical method for the preparation of organosulfur compounds. This review aims to provide an up-to-date discussion on direct C-H disulfuration, dithiocarbamation, xanthylation, thiocarbamation and thiocarbonation, with a special focus on describing scopes and mechanistic aspects. Moreover, the synthetic limitations and applications of some of these methodologies, along with the key unsolved challenges to be addressed in the future are also discussed. The majority of examples covered in this review are accomplished via metal-free, photochemical or electrochemical approaches, which are in alignment with the overraching objectives of green and sustainable chemistry. This comprehensive review aims to consolidate recent advancements, providing valuable insights into the dynamic landscape of efficient and sustainable synthetic strategies for these crucial classes of organosulfur compounds.

Direct C-H Hydroxylation of N-Heteroarenes and Benzenes via Base-Catalyzed Halogen Transfer

Hydroxylated (hetero)arenes are valued in many industries as both key constituents of end products and diversifiable synthetic building blocks. Accordingly, the development of reactions that complement and address the limitations of existing methods for the introduction of aromatic hydroxyl groups is an important goal. To this end, we apply base-catalyzed halogen transfer (X-transfer) to enable the direct C-H hydroxylation of mildly acidic N-heteroarenes and benzenes. This protocol employs an alkoxide base to catalyze X-transfer from sacrificial 2-halothiophene oxidants to aryl substrates, forming SNAr-active intermediates that undergo nucleophilic hydroxylation. Key to this process is the use of 2-phenylethanol as an inexpensive hydroxide surrogate that, after aromatic substitution and rapid elimination, provides the hydroxylated arene and styrene byproduct. Use of simple 2-halothiophenes allows for C-H hydroxylation of 6-membered N-heteroarenes and 1,3-azole derivatives, while a rationally designed 2-halobenzothiophene oxidant extends the scope to electron-deficient benzene substrates. Mechanistic studies indicate that aromatic X-transfer is reversible, suggesting that the deprotonation, halogenation, and substitution steps operate in synergy, manifesting in unique selectivity trends that are not necessarily dependent on the most acidic aryl position. The utility of this method is further demonstrated through streamlined target molecule syntheses, examples of regioselectivity that contrast alternative C-H hydroxylation methods, and the scalable recycling of the thiophene oxidants.

Direct Access to Thio- and Seleno-acetamides Bearing (Benzo)thiazoles by a Base-Promoted One-Pot Two-Step Three-Component Reaction of 2-Amino(benzo)thiazoles with Aryl Acetyl Chlorides and Dichalcogenides

Highly efficient and practical carbon-chalcogen (S, Se) and amide bonds formation methodologies for the synthesis of thio- and seleno-acetamides were developed, via the base-promoted one-pot two-step reactions of 2-amino(benzo)thiazoles and aryl acetyl chlorides with dichalcogenides. This cross-coupling reaction afforded the goal products that had been chalcogenated regioselectively in moderate to good yields. Further transformations of the new synthesized compounds, DFT calculations and preliminary mechanism studies are discussed as well.

Recent advances in selective mono-/dichalcogenation and exclusive dichalcogenation of C(sp2)-H and C(sp3)-H bonds

Organochalcogen compounds are prevalent in numerous natural products, pharmaceuticals, agrochemicals, polymers, biological molecules and synthetic intermediates. Direct chalcogenation of C-H bonds has evolved as a step- and atom-economical method for the synthesis of chalcogen-bearing compounds. Nevertheless, direct C-H chalcogenation severely lags behind C-C, C-N and C-O bond formations. Moreover, compared with the C-H monochalcogenation, reports of selective mono-/dichalcogenation and exclusive dichalcogenation of C-H bonds are relatively scarce. The past decade has witnessed significant advancements in selective mono-/dichalcogenation and exclusive dichalcogenation of various C(sp2)-H and C(sp3)-H bonds via transition-metal-catalyzed/mediated, photocatalytic, electrochemical or metal-free approaches. In light of the significance of both mono- and dichalcogen-containing compounds in various fields of chemical science and the critical issue of chemoselectivity in organic synthesis, the present review systematically summarizes the advances in these research fields, with a special focus on elucidating scopes and mechanistic aspects. Moreover, the synthetic limitations, applications of some of these processes, the current challenges and our own perspectives on these highly active research fields are also discussed. Based on the substrate types and C-H bonds being chalcogenated, the present review is organized into four sections: (1) transition-metal-catalyzed/mediated chelation-assisted selective C-H mono-/dichalcogenation or exclusive dichalcogenation of (hetero)arenes; (2) directing group-free selective C-H mono-/dichalcogenation or exclusive dichalcogenation of electron-rich (hetero)arenes; (3) C(sp3)-H dichalcogenation; (4) dichalcogenation of both C(sp2)-H and C(sp3)-H bonds. We believe the present review will serve as an invaluable resource for future innovations and drug discovery.

Direct conversion of carboxylic acids to free thiols via radical relay acridine photocatalysis enabled by N-O bond cleavage

Carboxylic acids and thiols are basic chemical compounds with diverse utility and widespread reactivity. However, the direct conversion of unprotected acids to thiols is hampered due to a fundamental problem - free thiols are incompatible with the alkyl radicals formed on decarboxylation of carboxylic acids. Herein, we describe a concept for the direct photocatalytic thiolation of unprotected acids allowing unprotected thiols and their derivatives to be obtained. The method is based on the application of a thionocarbonate reagent featuring the N-O bond. The reagent serves both for the rapid trapping of alkyl radicals and for the facile regeneration of the acridine-type photocatalyst.

Reaction of Diaryliodonium Salts with Potassium Alkyl Xanthates as an Entry Point to Accessing Organosulfur Compounds

Preparation of S-aryl xanthates via transition-metal-catalyzed or S_NAr reactions is complicated by their further transformations under the utilized conditions. In contrast, S-arylation of potassium O-alkyl xanthates with diaryliodonium salts proceeds under mild conditions, enabling access to substituted S-aryl xanthates. The method exhibits good functional group tolerance and can be applied to the late-stage C-H functionalization of drug molecules. Divergent transformations of the resulting S-aryl xanthates provide rapid access to a range of medicinal chemistry-relevant organosulfur compounds.

Ligand-Enabled C-H Hydroxylation with Aqueous H2O2 at Room Temperature

With the large number of Pd(II)-catalyzed C-H activation reactions of native substrates developed in the past decade, the development of catalysts to enable the use of green oxidants under safe and practical conditions has become an increasingly important challenge. Notably, the compatibility of Pd(II) catalysts with sustainable aqueous H2O2 has been a long-standing challenge in catalysis including Wacker-type oxidations. We report herein a bifunctional bidentate carboxyl-pyridone (CarboxPyridone) ligand that enables room-temperature Pd-catalyzed C-H hydroxylation of a broad range of benzoic and phenylacetic acids with an industry-compatible oxidant, aqueous hydrogen peroxide (35% H2O2). The scalability of this methodology is demonstrated by a 1000 mmol scale reaction of ibuprofen (206 g) using only a 1 mol % Pd catalyst loading. The utility of this protocol is further illustrated through derivatization of the products and synthesis of polyfluorinated natural product coumestan and pterocarpene from phenol intermediates prepared using this methodology.

Organocatalytic Synthesis of Phenols from Diaryliodonium Salts with Water under Metal-Free Conditions

The metal-free synthesis of phenols from diaryliodonium salts with water was developed by using N-benzylpyridin-2-one as an organocatalyst. In this process, sterically congested, functionalized, and heterocycle-containing iodonium salts were smoothly converted to the desired products, and the clofibrate and mecloqualone derivatives were also synthesized in high yields. In addition, the gram-scale experiment was successfully carried out with 10 mmol of a sterically congested substrate.

Visible-Light-Driven Thioesterification of Aryl Halides with Potassium Thiocarboxylates: Transition-Metal Catalyst-Free Incorporation of Sulfur Functionalities into an Aromatic Ring

Reactions of acceptor-substituted aryl iodides and bromides with potassium thiocarboxylates under white light irradiation allow for the preparation of S-aryl thioesters including synthetically versatile S-aryl thioacetates. This transition-metal and external photocatalyst-free method features extremely mild reaction conditions compared with those used in transition-metal-catalyzed protocols. Reactions proceed via the initial formation of an electron donor-acceptor (EDA) complex in the ground state, which was supported by UV-vis spectra. Electron paramagnetic resonance (EPR) spin-trapping experiments using phenyl-N-tert-butylnitrone (PBN) have revealed the radical nature of the reaction.

Metal-Free Boron-Mediated ortho-C-H Hydroxylation of N-Benzyl-3,4,5-tribromopyrazoles

A novel route has been reported for C-H hydroxylation of benzyl compounds directed by a 3,4,5-tribromopyrazole auxiliary via boronation/oxidation using BBr₃ and NaBO₃·4H₂O. The strategy exhibits outstanding site selectivity and affords the corresponding phenols in moderate to excellent yields under metal-free conditions. Besides, this protocol can be achieved in one pot, which is highly promising as a practical method for use in a multistep organic synthetic process.

Catalytic synthesis of phenols with nitrous oxide

The development of catalytic chemical processes that enable the revalorization of nitrous oxide (N₂O) is an attractive strategy to alleviate the environmental threat posed by its emissions^1–6. Traditionally, N₂O has been considered an inert molecule, intractable for organic chemists as an oxidant or O-atom transfer reagent, owing to the harsh conditions required for its activation (>150 °C, 50‒200 bar)^7–11. Here we report an insertion of N₂O into a Ni‒C bond under mild conditions (room temperature, 1.5–2 bar N₂O), thus delivering valuable phenols and releasing benign N₂. This fundamentally distinct organometallic C‒O bond-forming step differs from the current strategies based on reductive elimination and enables an alternative catalytic approach for the conversion of aryl halides to phenols. The process was rendered catalytic by means of a bipyridine-based ligands for the Ni centre. The method is robust, mild and highly selective, able to accommodate base-sensitive functionalities as well as permitting phenol synthesis from densely functionalized aryl halides. Although this protocol does not provide a solution to the mitigation of N₂O emissions, it represents a reactivity blueprint for the mild revalorization of abundant N₂O as an O source.

A study demonstrates that nitrous oxide can act as the source of O in a catalytic conversion of aryl halides to phenols, releasing N₂ as by-product.

Emerging Chemical Diversity and Potential Applications of Enzymes in the DMSO Reductase Superfamily

Molybdenum- and tungsten-dependent proteins catalyze essential processes in living organisms and biogeochemical cycles. Among these enzymes, members of the dimethyl sulfoxide (DMSO) reductase superfamily are considered the most diverse, facilitating a wide range of chemical transformations that can be categorized as oxygen atom installation, removal, and transfer. Importantly, DMSO reductase enzymes provide high efficiency and excellent selectivity while operating under mild conditions without conventional oxidants such as oxygen or peroxides. Despite the potential utility of these enzymes as biocatalysts, such applications have not been fully explored. In addition, the vast majority of DMSO reductase enzymes still remain uncharacterized. In this review, we describe the reactivities, proposed mechanisms, and potential synthetic applications of selected enzymes in the DMSO reductase superfamily. We also highlight emerging opportunities to discover new chemical activity and current challenges in studying and engineering proteins in the DMSO reductase superfamily. Expected final online publication date for the Annual Review of Biochemistry, Volume 91 is June 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Selective hydroxylation of aryl iodides to produce phenols under mild conditions using a supported copper catalyst

Owing to the high activity and low-cost, copper-based catalysts are promising candidates for transforming aromatic halides to yield phenols. In this work, we report the selective hydroxylation of aromatic iodides to produce phenols using an atomically dispersed copper catalyst (Cu-ZnO-ZrO2) under mild reaction conditions. The reactions were conducted without the use of additional organic ligands, and the protection of an inert atmosphere environment is not required. The catalyst can be easily prepared, scalable, and is very efficient for a wide range of substrates. The catalytic reactions can be carried out with only 1.24 mol% Cu loading, which shows great potential in mass production.

Novel library synthesis of 3,4-disubstituted pyridin-2(1H)-ones via cleavage of pyridine-2-oxy-7-azabenzotriazole ethers under ionic hydrogenation conditions at room temperature

In our hands, efficient access to the 4-amino-3-carboxamide disubstituted pyridine-2(1H)-one kinase hinge-binder motif proved to be more challenging than anticipated requiring a significant investment in route scouting and optimization. This full paper focuses on the synthesis issues that we encountered during our route exploration and the original solutions we found that helped us to identify two optimized library-style processes to prepare our large kinase inhibitor library.

Cooperative photoredox and palladium catalysis: recent advances in various functionalization reactions

Cooperative photoredox and palladium catalysis for various functionalization reactions.

1,3,5-Triaza-7-phosphaadamantane (PTA) Derived Caged Phosphines for Palladium-Catalyzed Selective Functionalization of Nucleosides and Heteroarenes

Phosphines have, in combination with transition metals, played a pivotal role in the rapid development of efficient catalytic processes. Caged phosphines constitute a class of three-dimensional scaffolds providing unique control over steric and electronic properties. The versatility of the caged phosphine ligands has been demonstrated elegantly by the groups of Verkade, Gonzalvi as well as Stradiotto. Our research group has also been working extensively for the past several years in the development of 1,3,5-triaza-7-phosphaadamantane-based caged ligands and in this personal note we have summarized these applications pertaining to the modification of biologically useful nucleosides and heteroarenes.

Recent Advances in the Synthesis of Sulfides, Sulfoxides and Sulfones via C-S Bond Construction from Non-Halide Substrates

The construction of a C-S bond is a powerful strategy for the synthesis of sulfur containing compounds including sulfides, sulfoxides, and sulfones. Recent methodological developments have revealed lots of novel protocols for C-S bond formation, providing easy access to sulfur containing compounds. Unlike traditional Ullmann typed C-S coupling reaction, the recently developed reactions frequently use non-halide compounds, such as diazo compounds and simple arenes/alkanes instead of aryl halides as substrates. On the other hand, novel C-S coupling reaction pathways involving thiyl radicals have emerged as an important strategy to construct C-S bonds. In this review, we focus on the recent advances on the synthesis of sulfides, sulfoxides, and sulfones from non-halide substrates involving C-S bond construction.

Palladium-Catalyzed Hydroxylation of Aryl Halides with Boric Acid

Boric acid, B(OH)₃, is proved to be an efficient hydroxide reagent in converting (hetero)aryl halides to the corresponding phenols with a Pd catalyst under mild conditions. Various phenol products were obtained in good to excellent yields. This transformation tolerates a broad range of functional groups and molecules, including base-sensitive substituents and complicated pharmaceutical (hetero)aryl halide molecules.

Metal-free C-H mercaptalization of benzothiazoles and benzoxazoles using 1,3-propanedithiol as thiol source

A facile and effective C-H functionalization strategy for the synthesis of 2-mercaptobenzothiazoles and 2-mercaptobenzoxazoles is described. 1,3-Propanedithiol was employed to convert benzothiazoles and benzoxazoles to the corresponding heteroarylthiols in the presence of potassium hydroxide and DMSO. This novel protocol is featured by direct C-H mercaptalization of heteroarenes and a simple reaction system.

Polymer-supported eosin Y as a reusable photocatalyst for visible light mediated organic transformations

Rapid synthesis of highly stable polymer-supported eosin Y for visible light-driven photoxidation of thioethers to sulfoxides and phenylboronic acids to phenols.

Investigations on Gold-Catalyzed Thioalkyne Activation Toward Facile Synthesis of Ketene Dithioacetals

Nucleophilic addition to thioalkynes was investigated under various catalytic conditions with gold(I) complexes being identified as the optimal catalysts. Structural evaluation of the product revealed an unexpected cis-addition, arising from a gold-associated thioketene intermediate. Based on this interesting mechanistic insight, a gold(I)-catalyzed thioether addition to thioalkynes was developed as a novel approach to prepare ketene dithioacetals with good yields and high efficiency.