Continuous preparation of carbon-nanotube-supported platinum catalysts in a flow reactor directly heated by electric current

Novel Composites of Poly(vinyl chloride) with Carbon Fibre/Carbon Nanotube Hybrid Filler

This article presents the results of studies of poly(vinyl chloride) (PVC) composites modified with a hybrid carbon filler of carbon fibres (CFs) and multiwalled carbon nanotubes (MWCNTs). The hybrid filler was produced by a solvent method, using poly(vinyl acetate) (PVAc) as an adhesive. The proportion of components in the hybrid filler with CF-CNT-PVAc was 50:2.5:1, respectively. The obtained hybrid filler was evaluated by SEM, TG, and Raman spectroscopy. The PVC composites were produced by extrusion with proportions of the hybrid filler as 1 wt%, 5 wt%, or 10 wt%. Thermal stability by the TG method, mechanical properties, and the glass transition temperature (T_g) by the DMA and DSC methods were determined. The composite structure was evaluated by SEM and Raman spectroscopy. The effect of the hybrid filler on electrical properties was investigated by studying the cross and surface resistivity. It was concluded that, aside from a substantial increase in the elastic modulus, no substantial improvement in the PVC/CF/CNT composites' mechanical properties was observed; however, slight increases in thermal stability and Tg were noted. The addition of the hybrid filler contributed to a substantial change in the composites' electrical properties. SEM observations demonstrated improved CNT dispersibility in the matrix, however, without a completely homogeneous coverage of CF by CNT.

Boosting Piezo/Photo-Induced Charge Transfer of CNT/Bi4O5I2 Catalyst for Efficient Ultrasound-Assisted Degradation of Rhodamine B

Strain-induced internal electric fields present a significant path to boosting the separation of photoinduced electrons and holes. In addition, piezo-induced positive/negative pairs could be released smoothly, taking advantage of the excellent electroconductibility of some conductors. Herein, the hybrid piezo-photocatalysis is constructed by combining debut piezoelectric nanosheets (Bi4O5I2) and typical conductor multiwalled carbon nanotubes (CNT). The photocatalytic degradation efficiency that the hybrid CNT/Bi4O5I2 exhibits was remarkably increased by more than 2.3 times under ultrasonic vibration, due to the piezo-generated internal electric field. In addition, the transient photocurrent spectroscopy and electrochemical impedance measurement reveal that the CNT coating on Bi4O5I2 enhances the piezo-induced positive/negative migration. Therefore, the piezocatalytic activity of CNT/Bi4O5I2 could be improved by three times, compared with pure Bi4O5I2 nanosheets. Our results may offer promising approaches to sketching efficient piezo-photocatalysis for the full utilization of solar energy or mechanical vibration.

Towards the continuous production of Pt-based heterogeneous catalysts using microfluidic systems

The continuous production of Pt-based heterogeneous catalysts based on ultra-small (<2 nm) noble metal nanoparticles deposited on mesoporous ordered silica and their catalytic activity in VOC abatement are here reported. Microfluidic reactors can be used not only to enable the fast and controlled production of ultra-small Pt nanoparticles (NPs), but also alloyed NPs including PtPd, PtRu and PtRh can be formed in short residence times (between 60 s and 5 min). A novel continuous and homogeneous loading of these catalytic NPs on SBA-15 used as a mesoporous support is also here reported. This procedure eases the NP loading and minimizes washing post-treatments. A 12-fold decrease in the synthesis time was obtained when using this microfluidic reactor compared to the traditional batch production of Pt NPs. Microflow and batch type reactors yielded a Pt precursor conversion to generate Pt NPs with a 90% and 85% yield, respectively. Under the same conditions, the productivity of the microfluidic system (27 mg Pt NPs per h) was twice the one achieved in the conventional batch type reactor. The catalytic performance of the supported catalysts separately prepared by microfluidics and by conventional impregnation under the same conditions and with the same noble metal loading was also compared in the n-hexane abatement as a model of VOCs. Both catalysts were active in the VOC oxidation reaction but a 95% reduction in the catalyst synthesis time was obtained when using the catalysts produced in the microfluidic platform. For this reaction a long-term activity test was successfully carried out at 175 °C during 30 h on stream using the heterogeneous catalyst prepared by using the flow reactor.

Continuous flow chemistry: a discovery tool for new chemical reactivity patterns

A new reactivity pattern and extended reaction scope has been obtained by transferring a reaction from batch mode to flow.

Continuous-flow hydration-condensation reaction: Synthesis of α,β-unsaturated ketones from alkynes and aldehydes by using a heterogeneous solid acid catalyst

A simple, practical and efficient continuous-flow hydration-condensation protocol was developed for the synthesis of α,β-unsaturated ketones starting from alkynes and aldehydes by employing a heterogeneous catalyst in a flow microwave. The procedure presents a straightforward and convenient access to valuable differently substituted chalcones and can be applied on multigram scale.