Efficient continuous-flow synthesis of novel 1,2,3-triazole-substituted β-aminocyclohexanecarboxylic acid derivatives with gram-scale production

Shift of the reaction equilibrium at high pressure in the continuous synthesis of neuraminic acid

The importance of a compound that helps fight against influenza is, in times of a pandemic, self-evident. In order to produce these compounds in vast quantities, many researchers consider continuous flow reactors in chemical industry as next stepping stone for large scale production. For these reasons, the synthesis of N-acetylneuraminic acid (Neu5Ac) in a continuous fixed-bed reactor by an immobilized epimerase and aldolase was investigated in detail. The immobilized enzymes showed high stability, with half-life times > 173 days under storage conditions (6 °C in buffer) and reusability over 50 recycling steps, and were characterized regarding the reaction kinetics (initial rate) and scalability (different lab scales) in a batch reactor. The reaction kinetics were studied in a continuous flow reactor. A high-pressure circular reactor (up to 130 MPa) was applied for the investigation of changes in the position of the reaction equilibrium. By this, equilibrium conversion, selectivity, and yield were increased from 57.9% to 63.9%, 81.9% to 84.7%, and 47.5% to 54.1%, respectively. This indicates a reduction in molar volume from N-acetyl-ᴅ-glucosamine (GlcNAc) and pyruvate (Pyr) to Neu5Ac. In particular, the circular reactor showed great potential to study reactions at high pressure while allowing for easy sampling. Additionally, an increase in affinity of pyruvate towards both tested enzymes was observed when high pressure was applied, as evidenced by a decrease of K_I for the epimerase and K_M for the aldolase from 108 to 42 mM and 91 to 37 mM, respectively.

The CuAAC: Principles, Homogeneous and Heterogeneous Catalysts, and Novel Developments and Applications

The copper-catalyzed azide/alkyne cycloaddition reaction (CuAAC) has emerged as the most useful "click" chemistry. Polymer science has profited enormously from CuAAC by its simplicity, ease, scope, applicability and efficiency. Basic principles of the CuAAC are reviewed with a focus on homogeneous and heterogeneous catalysts, ligands, anchimeric assistance, and basic chemical principles. Recent developments of ligand design and acceleration are discussed.

The potential of click reactions for the synthesis of bioactive triterpenes

Click reactions between alkynes and azides using the privileged scaffold of triterpenes have been of interest for biological chemistry. Many publications deal with the synthesis of novel bioactive molecules; these conjugates have also been used for bioanalytical and diagnostic purposes. As a result, conjugates of better physicochemical properties were obtained; even compounds of improved solubility in water and physiological fluids were made through the introduction of a triazol residue. "Hybrid-structures", i.e. molecules consisting of two independently bioactive subunits linked by a triazole residue were higher bioactive than their parent compounds but not as active as expected, and with a few exceptions the ultimate breakthrough has not yet been achieved. Only in the synthesis of compounds with anti-leishmanial activity some new and promising lead structures were found. As a consequence, triazole modified triterpenes seem to hold their greatest future prospect rather as diagnostic reagents and molecular probes than as drugs.

A flow platform for degradation-free CuAAC bioconjugation

The Cu-catalyzed azide-alkyne cycloaddition (CuAAC) reaction is a cornerstone method for the ligation of biomolecules. However, undesired Cu-mediated oxidation and Cu-contamination in bioconjugates limits biomedical utility. Here, we report a generic CuAAC flow platform for the rapid, robust, and broad-spectrum formation of discrete triazole bioconjugates. This process leverages an engineering problem to chemical advantage: solvent-mediated Cu pipe erosion generates ppm levels of Cu in situ under laminar flow conditions. This is sufficient to catalyze the CuAAC reaction of small molecule alkynes and azides, fluorophores, marketed drug molecules, peptides, DNA, and therapeutic oligonucleotides. This flow approach, not replicated in batch, operates at ambient temperature and pressure, requires short residence times, avoids oxidation of sensitive functional groups, and produces products with very low ppm Cu contamination.

Cu-catalyzed azide-alkyne cycloaddition (CuAAC) reaction is a common bioconjugation technique; however oxidative degradation and residual copper may limit its use. Here, the authors show that ppm levels of Cu, generated in situ by solvent-mediated pipe erosion in flow, catalyze the CuAAC reaction with no product degradation.

Development of Batch and Flow Immobilized Catalytic Systems with High Catalytic Activity and Reusability

My mission in catalysis research is to develop highly active and reusable supported catalytic systems in terms of fundamental chemistry and industrial application. For this purpose, I developed three types of highly active and reusable supported catalytic systems. The first type involves polymeric base-supported metal catalysts: Novel polymeric imidazole-Pd and Cu complexes were developed that worked at the mol ppm level for a variety of organic transformations. The second involves catalytic membrane-installed microflow reactors: Membranous polymeric palladium and copper complex/nanoparticle catalysts were installed at the center of a microtube to produce novel catalytic membrane-immobilized flow microreactor devices. These catalytic devices mediated a variety of organic transformations to afford the corresponding products in high yield within 1-38 s. The third is a silicon nanowire array-immobilized palladium nanoparticle catalyst. This device promoted a variety of organic transformations as a heterogeneous catalyst. The Mizoroki-Heck reaction proceeded with 280 mol ppb (0.000028 mol%) of the catalyst, affording the corresponding products in high yield.

The Hitchhiker's Guide to Flow Chemistry ∥

Flow chemistry involves the use of channels or tubing to conduct a reaction in a continuous stream rather than in a flask. Flow equipment provides chemists with unique control over reaction parameters enhancing reactivity or in some cases enabling new reactions. This relatively young technology has received a remarkable amount of attention in the past decade with many reports on what can be done in flow. Until recently, however, the question, "Should we do this in flow?" has merely been an afterthought. This review introduces readers to the basic principles and fundamentals of flow chemistry and critically discusses recent flow chemistry accounts.

Taming hazardous chemistry by continuous flow technology

Over the last two decades, flow technologies have become increasingly popular in the field of organic chemistry, offering solutions for engineering and/or chemical problems. Flow reactors enhance the mass and heat transfer, resulting in rapid reaction mixing, and enable a precise control over the reaction parameters, increasing the overall process selectivity, efficiency and safety. These features allow chemists to tackle unexploited challenges in their work, with the ultimate objective making chemistry more accessible for laboratory and industrial applications, avoiding the need to store and handle toxic, reactive and explosive reagents. This review covers some of the latest and most relevant developments in the field of continuous flow chemistry with the focus on hazardous reactions.

The utilization of copper flow reactors in organic synthesis

The use of flow chemistry techniques has flourished over the past decade, with the field expanding to include the use of copper flow reactors in bench-top organic synthesis in recent years. These reactors are available in a variety of forms and possess a number of advantages over their batch reaction counterparts, in terms of both safety and yield. This review will highlight the current research employing copper flow reactors, such as 1,3-dipolar cycloadditions ('click' chemistry), macrocyclizations (via 'click' chemistry), Sonogashira C-C couplings, Ullmann couplings, decarboxylations, and other reported findings.

Harnessing the Versatility of Continuous-Flow Processes: Selective and Efficient Reactions

There is a great need for effective transformations and a broad range of novel chemical entities. Continuous-flow (CF) approaches are of considerable current interest: highly efficient and selective reactions can be performed in CF reactors. The reaction setup of CF reactors offers a wide variety of possible points where versatility can be introduced. This article presents a number of selective and highly efficient gas-liquid-solid and liquid-solid reactions involving a range of reagents and immobilized catalysts. Enantioselective transformations through catalytic hydrogenation and organocatalytic reactions are included, and isotopically labelled compounds and pharmaceutically relevant 1,2,3-triazoles are synthesized in CF reactors. Importantly, the catalyst bed can be changed to a solid-phase peptide synthesis resin, with which peptide synthesis can be performed with the utilization of only 1.5 equivalents of the amino acid.

When CuAAC 'Click Chemistry' goes heterogeneous

Within the green chemistry context, heterogeneous catalysis is more and more applied to organic synthesis. The well known ‘click chemistry’ and especially its flagship, the copper-catalyzed azide–alkyne cycloaddition reaction (CuAAC), is now catch up by such heterogenisation process and copper ions or metals have been grafted or deposited on or into various solids, such as (bio)polymers, charcoal, silica, zeolites, POM or MOF.

Copper-catalysed azide-alkyne cycloadditions (CuAAC): an update

The reactions of organic azides and alkynes catalysed by copper species represent the prototypical examples of click chemistry. The so-called CuAAC reaction (copper-catalysed azide-alkyne cycloaddition), discovered in 2002, has been expanded since then to become an excellent tool in organic synthesis. In this contribution the recent results described in the literature since 2010 are reviewed, classified according to the nature of the catalyst precursor: copper(I) or copper(II) salts or complexes, metallic or nano-particulated copper and several solid-supported copper systems.

Flow chemistry as a versatile tool for the synthesis of triazoles

This review surveys the continuous-flow strategies for the synthesis of triazoles by means of copper-catalyzed and catalyst-free cycloadditions between azides and various dipolarophiles.

Continuous-flow azide–alkyne cycloadditions with an effective bimetallic catalyst and a simple scavenger system

A continuous-flow technique was utilized for azide–alkyne cycloadditions catalyzed by copper on iron bimetallic system. An iron powder unit was used as a readily available copper scavenger, which turned into an in situ generated copper catalyst after several hours of continuous operation.