An Intramedullary Locking Nail for Standardized Fixation of Femur Osteotomies to Analyze Normal and Defective Bone Healing in Mice

Random and aligned electrostatically spun PLLA nanofibrous membranes enhance bone repair in mouse femur midshaft defects

Long-segment bone defects are a common clinical challenge and abstract biomaterials are a promising therapy. Poly-L-lactic acid (PLLA) nanofibrous membranes prepared by electrostatic spinning have a good bone repair potential. However, there are random and aligned surface morphologies of electrostatic spun PLLA nanofibrous membranes, which can affect the migration, proliferation, and differentiation ability of cells. The role of surface morphology in the repair of long bone defects in vivo is currently unknown. In this study, random and aligned electrostatically spun PLLA nanofibrous membranes were prepared, characterised, and implanted into a femur midshaft defect mouse model. The ability of electrostatically spun PLLA nanofibrous membranes to enhance bone repair was tested using X-ray photography, high-resolution micro-computed tomography (micro-CT), and pathological section specimens. The results showed that both random and aligned electrostatically spun PLLA nanofibrous membranes enhanced bone regeneration at bone defects, but the aligned ones exhibited superior results. These results provide a theoretical basis for engineering the surface morphology of bone repair materials.

Structural optimization of 3D-printed patient-specific ceramic scaffolds for in vivo bone regeneration in load-bearing defects

Tissue engineering has recently gained popularity as an alternative to autografts to stimulate bone tissue regeneration through structures called scaffolds. Most of the in vivo experiments on long-bony defects use internally-stabilized generic scaffolds. Despite the wide variety of computational methods, a standardized protocol is required to optimize ceramic scaffolds for load-bearing bony defects stabilized with flexible fixations. An optimization problem was defined for applications to sheep metatarsus defects. It covers biological parameters (porosity, pore size, and the specific surface area) and mechanical constraints based on in vivo and in vitro results reported in the literature. The optimized parameters (59.30% of porosity, 5768.91 m^-1 of specific surface area, and 360.80 μm of pore size) and the compressive strength of the selected structure were validated in vitro by means of tomographic images and compression tests of six 3D-printed samples. Divergences between the design and measured values of the optimized parameters, mainly due to manufacturing defects, are consistent with the previous studies. Using the mixed experimental-mathematical scaffold-design procedure described, they could be implanted in vivo with instrumented external fixators, therefore facilitating biomechanical monitoring of the regeneration process.

Evaluation of Femoral Bone Fracture Healing in Rats by the Modal Damping Factor and Its Correlation With Peripheral Quantitative Computed Tomography

Introduction

Monitoring the progress of fracture healing is essential in order to establish the appropriate timing that ensures adequate bone strength for weight-bearing. In the present experimental study on a rat model of femoral fracture healing, the measurement of bone density and strength by peripheral quantitative computerized tomography (pQCT) was correlated with the modal damping factor (MDF) method.

Methods

Four groups of 12 male six-month-old Wistar rats each were anesthetized and submitted to baseline femoral pQCT and MDF scanning, followed by aseptic midshaft osteotomy of the right femur which was fixed by a locking intramedullary nail technique. The animals were left to recover and re-scanned following euthanasia of each group after six, eight, 10, and 12 weeks, respectively. The parameters measured by the pQCT method were total bone mineral density (BMD) and polar strength strain index (SSIp).

Results

Fracture healing progressed over time and at 12 weeks post-osteotomy there was no statistically significant difference between the osteotomized right and the control left femurs regarding MDF, BMD, and SSIp measurements. The highest correlations for the osteotomized femurs were observed between MDF and BMD (r = -0.647, P = 0.043), and between MDF and SSIp (r = -0.350, P = 0.321), at 10 weeks postoperatively. The high to moderate correlations between MDF and BMD, and between MDF and SSIp respectively, support the validity of MDF in assessing fracture healing.

Conclusions

Based on our findings in this fracture healing animal model, the results from the MDF method are reliable and correlate highly with the total BMD and moderately with the SSI polar values obtained by the pQCT method of bone quality measurement. Further studies are needed which may additionally support that the MDF method can be an attractive portable alternative to monitor fracture healing in the community.

A comprehensive review of mouse diaphyseal femur fracture models

Complications related to treatment of long bone fractures still stand as a major challenge for orthopaedic surgeons. Elucidation of the mechanisms of bone healing and development, and the subsequent alteration of these mechanisms to improve outcomes, typically requires animal models as an intermediary between in vitro and human clinical studies. Murine models are some of the most commonly used in translational research, and mouse fracture models are particularly diverse, offering a wide variety of customization with distinct benefits and limitations depending on the study. This review critically examines three common femur fracture models in the mouse, namely cortical hole, 3-point fracture (Einhorn), and segmental bone defect. We lay out the general procedure for execution of each model, evaluate the practical implications and important advantages/disadvantages of each and describe recent innovations. Furthermore, we explore the applications that each model is best adapted for in the context of the current state of murine orthopaedic research.

Murine Aseptic Surgical Model of Femoral Atrophic Nonunion

Although bone repair is typically an efficient process, an inadequate healing response can occur, with approximately 5-20% of fractures developing nonunion. Even with improved healing strategies and external fixation devices, overall rate of nonunion has not been significantly reduced, particularly for atrophic nonunion. Atrophic nonunion is characterized by sparse or no callus formation and is difficult to treat clinically, resulting in long-term pain and functional limitation. Reliable preclinical models are needed to study the pathophysiology of atrophic nonunion to create better treatment options. The MouseNail kit (RISystem, Landquart, Switzerland) provides a highly standardized approach in which stabilized segmental bone defects are achieved through interlocked intramedullary nailing. However, reliably performing this surgery is technically challenging, particularly while maintaining strict asepsis. Skilled and aseptic surgical execution is important and necessary because it ensures optimal animal welfare and reproducibility. Therefore, the aim of this paper is to describe:•Novel modifications to the MouseNail kit that allow for: 1) a completely aseptic surgical environment, including description of a hanging limb orthopedic aseptic preparation and 2) a reduction in fracture gap size necessary for induction of atrophic nonunion.•Pre- to post-operative recommendations to facilitate successful performance of murine orthopedic survival surgery.

Animal models for bone tissue engineering and modelling disease

Tissue engineering and its clinical application, regenerative medicine, are instructing multiple approaches to aid in replacing bone loss after defects caused by trauma or cancer. In such cases, bone formation can be guided by engineered biodegradable and nonbiodegradable scaffolds with clearly defined architectural and mechanical properties informed by evidence-based research. With the ever-increasing expansion of bone tissue engineering and the pioneering research conducted to date, preclinical models are becoming a necessity to allow the engineered products to be translated to the clinic. In addition to creating smart bone scaffolds to mitigate bone loss, the field of tissue engineering and regenerative medicine is exploring methods to treat primary and secondary bone malignancies by creating models that mimic the clinical disease manifestation. This Review gives an overview of the preclinical testing in animal models used to evaluate bone regeneration concepts. Immunosuppressed rodent models have shown to be successful in mimicking bone malignancy via the implantation of human-derived cancer cells, whereas large animal models, including pigs, sheep and goats, are being used to provide an insight into bone formation and the effectiveness of scaffolds in induced tibial or femoral defects, providing clinically relevant similarity to human cases. Despite the recent progress, the successful translation of bone regeneration concepts from the bench to the bedside is rooted in the efforts of different research groups to standardise and validate the preclinical models for bone tissue engineering approaches.

A Minimally Invasive Model to Analyze Endochondral Fracture Healing in Mice Under Standardized Biomechanical Conditions

Bone healing models are necessary to analyze the complex mechanisms of fracture healing to improve clinical fracture treatment. During the last decade, an increased use of mouse models in orthopedic research was noted, most probably because mouse models offer a large number of genetically-modified strains and special antibodies for the analysis of molecular mechanisms of fracture healing. To control the biomechanical conditions, well-characterized osteosynthesis techniques are mandatory, also in mice. Here, we report on the design and use of a closed bone healing model to stabilize femur fractures in mice. The intramedullary screw, made of medical-grade stainless steel, provides through fracture compression an axial and rotational stability compared to the mostly used simple intramedullary pins, which show a complete lack of axial and rotational stability. The stability achieved by the intramedullary screw allows the analysis of endochondral healing. A large amount of callus tissue, received after stabilization with the screw, offers ideal conditions to harvest tissue for biochemical and molecular analyses. A further advantage of the use of the screw is the fact that the screw can be inserted into the femur with a minimally invasive technique without inducing damage to the soft tissue. In conclusion, the screw is a unique implant that can ideally be used in closed fracture healing models offering standardized biomechanical conditions.