Preparation and High-temperature Anti-adhesion Behavior of a Slippery Surface on Stainless Steel

Comparison of Anti-Icing, Antifouling, and Anticorrosion Performances of the Superhydrophobic and Lubricant-Infused Coatings Based on a Hollow-Structured Kapok Fiber

The superhydrophobic surface and slippery liquid-infused porous surface (SLIPS)/lubricant-infused surface (LIS) have attracted increasing attention owing to their multifunctionality. However, their practical applications face several problems such as complex and inefficient preparation technology, loss of lubricant, and fragile microstructures. Therefore, new strategies for preparing microstructures must be developed for constructing superhydrophobic and lubricant-infused coatings. Herein, a low-cost and high-efficiency method for developing superhydrophobic and lubricant-infused coatings based on in situ grown TiO2 on the surface of a hollow kapok fiber (KF) is reported. The anti-icing, antifouling, and anticorrosion performance of the superhydrophobic and lubricant-infused coatings are compared. The superhydrophobic coating reduces the formation and accumulation of ice. The lubricant-infused coating exhibits an extremely low ice adhesion strength and durable anti-icing properties. The superhydrophobic and lubricant-infused coatings show the outstanding antifouling property of diatom; the superhydrophobic surface exhibits superior stability over LIS without an external force field. The lubricant-infused coating shows excellent corrosion resistance and durability when immersed in a 3.5% NaCl solution. The superhydrophobic coating loses its protection as a result of the corrosion media permeating the metal substrate via the electrolytic cell and coating interface, and the lubricant-infused coating provides lasting corrosion resistance because of the lubricant filling into the interface. Although the superhydrophobic coating is fragile and the lubricant-infused coating will lose lubricant, this simple and convenient approach can be repeated to keep the coatings active. This study provides new inspiration for the fabrication of superhydrophobic surfaces and LIS based on natural products.

Fabrication of a Low Adhesive Superhydrophobic Surface on Ti6Al4V Alloys Using TiO₂/Ni Composite Electrodeposition

A superhydrophobic surface with low adhesion and good wear resistance was fabricated on Ti6Al4V substrates via TiO₂/Ni composite electrodeposition, and subsequently modified with a fluoroalkylsilane (FAS) film. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and optical contact angle measurements were used to characterize the surface morphologies, chemical compositions, and surface wettability. The superhydrophobicity of the as-prepared surface results from the fabrication of a hierarchical structure and the assembly of low-surface energy fluorinated components. The as-prepared surface had a water contact angle as high as 162.6° and a sliding angle close to 1.8°. Scratch and abrasion tests showed that the superhydrophobic coating provided a superior wear resistance and stable mechanical abrasion protection. In addition, the influence of processing conditions, such as working voltage, deposited time, pH value, and TiO₂ concentration, was also investigated.