Systematic development of self-emulsifying drug delivery systems of atorvastatin with improved bioavailability potential

Enhancing Oral Bioavailability of Domperidone Maleate: Formulation, In vitro Permeability Evaluation In-caco-2 Cell Monolayers and In situ Rat Intestinal Permeability Studies

BACKGROUND

The domperidone maleate, a lipophilic agent classified as a Biopharmaceutical Classification System Class II substance with weak water solubility. Self- Emulsifying Drug Delivery System is a novel approach to improve water solubility and, ultimately bioavailability of drugs.

OBJECTIVE

This study aimed to develop and characterize new domperidone-loaded self-emulsifying drug delivery systems as an alternative formulation and to evaluate the permeability of domperidone-loaded self-emulsifying drug delivery systems by using Caco-2 cells and via single-pass intestinal perfusion method.

METHODS

Three self-emulsifying drug delivery systems were prepared and characterized in terms of pH, viscosity, droplet size, zeta potential, polydispersity index, conductivity, etc. Each formulation underwent 10, 100, 200, and 500 times dilution in intestinal buffer pH 6.8 and stomach buffer pH 1.2, respectively. Female Sprague Dawley rats were employed for in situ single-pass intestinal perfusion investigations.

RESULTS

Results of the study revealed that the ideal self-emulsifying drug delivery systems formulation showed narrow droplet size, ideal zeta potential, and no conductivity. Additionally, as compared to the control groups, the optimum formulation had better apparent permeability (12.74 ± 0.02×10-4) from Caco-2 cell monolayer permeability experiments. The study also revealed greater Peff values (2.122 ± 0.892×10-4 cm/s) for the optimal formulation from in situ intestinal perfusion analyses in comparison to control groups (Domperidone; 0.802 ± 0.418×10-4 cm/s).

CONCLUSION

To conclude, prepared formulations can be a promising way of oral administration of Biopharmaceutical Classification System Class II drugs.

Improvement of dissolution profile of eplerenone with solidified self-emulsifying drug delivery systems (S-SEDDS)

BACKGROUND

Eplerenone is a member of antihypertensives used individually or in combination with other medicines. Eplerenone exhibits poor solubility and is considered a class II drug.

OBJECTIVE

Increasing the solubility of eplerenone by using both liquid and solid self-emulsifying drug delivery system as an alternative to its marketed tablet product.

METHODS

Solubility studies of eplerenone were done with different oils, surfactants, and co-surfactants to determine which one has the highest solubility for eplerenone and determine the preference in the formulations of liquid self-emulsifying drug delivery system. The solidification process was carried out with the adsorption to solid carrier method. Optimal ratios of components were specified with pseudo-ternary phase diagram technique. Self-emulsifying drug delivery system formulations were characterized in terms of chemical interaction, droplet size/distribution, crystallization behaviors, and rheological evaluation. In vitro drug release studies were conducted and compared to pure drug and marketed product.

RESULTS

The solubility screening results showed high solubility of EPL in triacetin (11.99 mg/mL) as oil, Kolliphor®EL (≈ 2.65 mg/mL), and Tween^®80 (≈ 1.91 mg/mL) as surfactant and polyethylene glycol 200 (PEG200) (≈ 8.50 mg/mL), dimethyl sulfoxide (≈ 7.57 mg/mL), Transcutol^®P (≈ 6.03 mg/mL) as co-surfactant, respectively. Rheology studies revealed that liquid self-emulsifying drug delivery formulations exhibited non-Newtonian pseudoplastic flow.

CONCLUSION

Solid self-emulsifying drug delivery systems prepared with Aerosil and Neusilin have shown tremendous improvement in terms of eplerenone dissolution by releasing the entire dose with boosted effect within 5 and 30 minutes respectively compared to the marketed product and pure eplerenone (p < 0.05).

Formulation and in vitro evaluation of self-nanoemulsifying liquisolid tablets of furosemide

Self-nanoemulsifying drug delivery systems (SNEDDS) were used to enhance the dissolution rate of furosemide as a model for class IV drugs and the system was solidified into liquisolid tablets. SNEDDS of furosemide contained 10% Castor oil, 60% Cremophor EL, and 30% PEG 400. The mean droplets size was 17.9 ± 4.5 nm. The theoretical model was used to calculate the amounts of the carrier (Avicel PH101) and coating materials (Aerosil 200) to prepare liquisolid powder. Carrier/coating materials ratio of 5/1 was used and Ludipress was added to the solid system, thus tablets with hardness of 45 ± 2 N were obtained. Liquisolid tablets showed 2-folds increase in drug release as compared to the generic tablets after 60 min in HCl 0.1 N using USP apparatus-II. Furosemide loaded SNEDDS tablets have great prospects for further in vivo studies, and the theoretical model is useful for calculating the adequate amounts of adsorbents required to solidify these systems.

Formation and Characterization of Zein-Based Oleogels

Oleogels are interesting as a result of their ability to hold large amounts of oil in a semi-solid gel structure. In the food industry, oleogels are most often investigated as substitutes for saturated and trans fats. In this work, the lyotropic formation of ethanol/zein/oleic acid gels was observed qualitatively and ternary phase diagrams were constructed to map the observations. The viscoelastic parameters G' and G'' were measured to confirm gel formation as observed in phase diagrams. Ultrasmall X-ray scattering was used to study the microstructural organization of ethanol/zein/oleic acid gels. Data suggested that the primary unit or building block for gel network structures was the rod-shaped zein molecule. Ultrasmall X-ray data suggested that zein/oleic acid gels have a highly organized microstructure, possibly the result of zein self-assembly. Zein was considered an effective oleogelator in ethanol/zein/oleic acid systems.

Paclitaxel-Loaded Colloidal Silica and TPGS-Based Solid Self-Emulsifying System Interferes Akt/mTOR Pathway in MDA-MB-231 and Demonstrates Anti-tumor Effect in Syngeneic Mammary Tumors

A solid self-emulsifying drug delivery system (SEDDS) of paclitaxel (PTX) was developed that could enhance its oral bioavailability and neutralize other niggles associated with conventional delivery systems of PTX. TPGS-centered SEDDS containing PTX was optimized by Box-Behnken experimental design and then formulated as fumed colloidal silica-based solid SEDDS microparticles (Si-PTX-S-SEDDS). AFM analysis exhibited round-shaped microparticles of approximately 2-3 μM diameter, whereas after reconstitution, particle size measurement showed nanoemulsion droplets of 30.00 ± 2.00 nm with a zeta potential of 17.38 ± 2.88 mV. Si-PTX-S-SEDDS displayed improved efficacy proven by reduced IC₅₀ of 0.19 ± 0.03 μM against MDA-MB-231 cells and a 45.83-fold higher cellular uptake in comparison to free PTX. Molecular mechanistic studies showed mitochondria-mediated intrinsic pathway of apoptosis following Akt/mTOR pathway, which is accompanied by survivin downregulation. Rhodamine 123 assay and chylomicron flow blocking studies revealed P-gp inhibition potential and lymphatic uptake of Si-PTX-S-SEDDS, responsible for over 4-fold increment in oral bioavailability compared to PTX administered as Taxol. In vivo anti-tumor studies in syngeneic mammary tumor model in SD rats revealed higher efficacy of Si-PTX-S-SEDDS as evident from significant reduction in tumor burden. In total, the developed Si-PTX-S-SEDDS formulation was found as an appropriate option for oral delivery of PTX.

Simvastatin-loaded nanoemulsions: development, characterization, stability study and toxicity assays

Aim: The aim of this study is to prepare and characterize simvastatin-loaded nanoemulsions (SIM-LN) as well as evaluate their physicochemical properties and toxicity. Methodology & results: The SIM-LN were prepared, their characteristics evaluated for 30 days, and after that, the SIM-LN toxicity was evaluated using Vero cell culture and the in vivo model of Caenorhabditis elegans. The prepared SIM-LN had an average droplet size of 139 ± 22 nm, with high encapsulation rate (>98.4%). The storage at room temperature proved to be the most optimal condition. Toxicity assays demonstrated no toxicity. Conclusion: It was demonstrated that the surfactants used as emulsifiers optimized the properties without side effects, because no toxicity was measured in preliminary tests.

Improving solubility and oral bioavailability of a novel antimalarial prodrug: comparing spray-dried dispersions with self-emulsifying drug delivery systems

To improve the solubility and oral bioavailability of a novel antimalarial agent ELQ-331(a prodrug of ELQ-300), spray-dried dispersions (SDD) and a self-emulsifying drug delivery system (SEDDS) were developed. SDD were prepared with polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus^®) polymer carrier and Aeroperl^® 300 Pharma and characterized by differential scanning calorimetry, powder X-ray diffraction. For SEDDS, solubility in oils, surfactants, and co-surfactants was determined and ternary phase diagram was constructed to show self-emulsifying area. SEDDS were characterized for spontaneous emulsification and droplet size distribution. The amorphous ELQ-331 SDD improved the solubility to 10× in fast-state simulated intestinal fluid and addition of sodium lauryl sulphate externally to SDDs further improved the solubility to ∼28.5× versus non-formulated drug. SEDDS had good self-emulsifying characteristics with small emulsion droplet sizes and narrow particle distribution. Oral pharmacokinetic studies for SDD and SEDDS formulations were performed in rats. The ELQ-331 rapidly converted to ELQ-300 soon after oral administration in rats. Exposure levels of ELQ-300 were about 1.4-fold higher (based on AUC) in SEDDS than SDD formulations. Poorly soluble drugs like ELQ-331 can be formulated using SDD or SEDDS to improve solubility and oral bioavailability.

In-Vitro and In-Vivo Evaluation of Supersaturable Self-Nanoemulsifying Drug Delivery System (SNEDDS) of Dutasteride

OBJECTIVE

A novel, Supersaturable Self-Nanoemulsifying Drug Delivery System (S-SNEDDS) has been prepared to improve the Dutasteride's poor aqueous solubility.

METHODS

By adding Hydroxy Propyl Methyl Cellulose (HPMC) as a precipitation inhibitor to conventional SNEDDS, a supersaturable system was prepared. Firstly, the prepared SNEDDS played an important role in increasing the aqueous solubility and hence oral absorption due to nano-range size. Secondly, the S-SNEDDS found to be advantageous over SNEDDS for having a higher drug load and inhibition of dilution precipitation of Dutasteride. Formulated S-SNEDDS (F1-F9) ranged from 37.42 ± 1.02 to 68.92 ± 0.09 nm with PDI 0.219-0.34 and drug loading of over 95 percent.

RESULTS

The study of in-vitro dissolution revealed higher dissolution for S-SNEDDS compared to SNEDDS and Avodart soft gelatin capsule as a commercial product. In addition, higher absorption was observed for S-SNEDDS showing approximately 1.28 and 1.27 fold AUC (0-24h) and Cmax compared to commercial products. Therefore, S-SNEDDS has proven as a novel drug delivery system with a higher drug load, higher self-emulsification efficiency, higher stability, higher dissolution and pronounced absorption.

CONCLUSION

In conclusion, S-SNEDDS could be a newly emerging approach to enhance aqueous solubility in many folds for drugs belonging to BCS Class II and IV and thus absorption and oral bioavailability.

BRD4 PROTAC as a novel therapeutic approach for the treatment of vemurafenib resistant melanoma: Preformulation studies, formulation development and in vitro evaluation

Limited therapeutic interventions and development of resistance to targeted therapy within few months of therapy pose a great challenge in the treatment of melanoma. Current work was aimed to investigate; (a) Anticancer activity of a novel class of compound - Bromodomain and Extra-Terminal motif (BET) protein degrader in sensitive and vemurafenib-resistant melanoma (b) Preformulation studies and formulation development. ARV-825 (ARV), a molecule designed using PROteolysis-TArgeting Chimeric (PROTAC) technology, degrades BRD4 protein instead of merely inhibiting it. Based on extensive preformulation studies, ARV loaded self-nanoemulsifying preconcentrate (ARV-SNEP) was developed and optimized. ARV showed extremely poor aqueous solubility (<7 μg/mL) and pH dependent hydrolytic degradation. CaCO-2 cell uptake assay and human liver microsome studies proved that ARV is a substrate of CYP3A4 but not of P-gp efflux pump. Optimized ARV-SNEP spontaneously formed nanoglobules of 45.02 nm with zeta potential of -3.78 mV and significantly enhanced solubility of ARV in various aqueous and bio-relevant media. Most importantly, ARV showed promising cytotoxicity, anti-migration and apoptotic activity against vemurafenib-resistant melanoma cells. ARV-SNEP could be potentially novel therapeutic approach for the treatment of drug-resistant melanoma. This is the very first paper investigating a PROTAC class of molecule for the treatment of drug resistant cancer, preformulation and formulation studies.

Atorvastatin calcium inclusion complexation with polysaccharide arabinogalactan and saponin disodium glycyrrhizate for increasing of solubility and bioavailability

The aim of the present investigation was to enhance the solubility and dissolution of atorvastatin calcium (ATV), a poorly water-soluble drug with larch polysaccharide arabinogalactan (AG) and disodium glycyrrhizate (Na₂GA) as carriers of drug delivery systems for improving its bioavailability. The interactions of ATV with AG or Na₂GA were investigated by DSC, XRD, SEM, and NMR techniques. The molecular weights of supramolecular systems-inclusion complexes and micelles-which are the hosts for ATV molecules were measured. On the other hand, the rapid storage assay (+ 40 °C for 3 months) showed that the chemical stability of ATV/AG and ATV/Na₂GA complexes had been enhanced compared with pure ATV. In vitro drug release showed a significant increase in ATV's dissolution rate after formation of a complex with Na₂GA or AG. Pharmacokinetic tests in vivo on laboratory animals showed a significant increase in ATV's bioavailability after its introduction as a complex with Na₂GA or AG. Moreover, ATV/AG and ATV/Na₂GA complexes showed a more prominent decrease of total cholesterol (TC) level compared to net ATV. Therefore, the novel mechanochemically synthesized complexes of ATV with AG or Na₂GA as drug delivery systems might be potential and promising candidates for hypercholesterolemia treatment and deserved further researches.

The studies of PLGA nanoparticles loading atorvastatin calcium for oral administration in vitro and in vivo

A biodegradable poly(lactic-co-glycolic acid) loading atorvastatin calcium (AC) nanoparticles (AC-PLGA-NPs) were prepared by probe ultrasonication and evaporation method aiming at improving the oral bioavailability of AC. The effects of experimental parameters, including stabilizer species, stabilizer concentration and pH of aqueous phase, on particle size were also evaluated. The resultant nanoparticles were in spherical shape with an average diameter of 174.7 nm and a narrow particle size distribution. And the drug loading and encapsulation efficiency were about 8% and 71%, respectively. The particle size and polydispersion were almost unchanged in 10 days. The release curves of AC-PLGA-NPs in vitro displaying sustained release characteristics indicated that its release mechanisms were matrix erosion and diffusion. The pharmacokinetic study in vivo revealed that the C_max and AUC_0-∞ of AC-PLGA-NPs in rats were nearly 3.7-fold and 4.7-fold higher than that of pure atorvastatin calcium suspension. Our results demonstrated that the delivery of AC-PLGA-NPs could be a promising approach for the oral delivery of AC for enhanced bioavailability.

Self-emulsifying drug delivery systems as a tool to improve solubility and bioavailability of resveratrol

Resveratrol is a nonflavonoid polyphenolic compound which has a broad range of desirable biological actions which include antioxidant, anti-inflammatory, antidiabetic, cardioprotective, and antitumor activities. However, there is concern that the bioavailability of resveratrol may limit some of its clinical utility. So, the aim of this study was to enhance the dissolution rate and oral hypoglycemic and hypolipidemic effect of resveratrol. This was achieved using self-emulsifying drug delivery system. The solubility of resveratrol was determined in various oils, surfactants, and cosurfactants. Phase diagram was plotted to identify the efficient self-emulsification regions using olive oil, Tween 80, and propylene glycol. The prepared self-emulsifying drug delivery system formulations were tested for thermodynamic stability, emulsification efficiency, droplet size, zeta potential, and in vitro drug release. Self-emulsification time averaged 17-99 seconds without precipitation and the mean droplet sizes ranged from 285 to 823 nm with overall zeta potential of -2.24 to -15.4 mv. All formulations improved drug dissolution in relation to unprocessed drug with a trend of decreased dissolution parameters with increasing oil content. The optimized formula, F19, with dissolution efficiency of 94% compared to only 42% of pure drug was used to study the in vivo hypoglycemic and hypolipidemic effects of resveratrol in diabetic-induced albino rats and comparing these effects with that of pure resveratrol in different doses. Treatment with the optimized formula, F19, at 10 mg/kg had significant hypoglycemic and hypolipidemic effects in diabetic-induced albino rats which were nearly similar to the high dose (20 mg/kg) of unprocessed resveratrol. From the study, it was concluded that formulation F19 has good emulsification property with uniform globule size, satisfactory in vitro drug release profile, and significant in vivo hypoglycemic effects which identify future opportunities for resveratrol delivery.

Development and Evaluation of Liquid and Solid Self-Emulsifying Drug Delivery Systems for Atorvastatin

The objective of this work was to design and characterize liquid and solid self-emulsifying drug delivery systems (SEDDS) for poorly soluble atorvastatin. To optimize the composition of liquid atorvastatin-SEDDS, solubility tests, pseudoternary phase diagrams, emulsification studies and other in vitro examinations (thermodynamic stability, droplet size and zeta potential analysis) were performed. Due to the disadvantages of liquid SEDDS (few choices for dosage forms, low stability and portability during the manufacturing process), attempts were also made to obtain solid SEDDS. Solid SEDDS were successfully obtained using the spray drying technique from two optimized liquid formulations, CF3 and OF2. Despite liquid SEDDS formulation, CF3 was characterized by lower turbidity, higher percentage transmittance and better self-emulsifying properties, and based on the in vitro dissolution study it can be concluded that better solubilization properties were exhibited by solid formulation OF2. Overall, the studies demonstrated the possibility of formulating liquid and solid SEEDS as promising carriers of atorvastatin. SEDDS, with their unique solubilization properties, provide the opportunity to deliver lipophilic drugs to the gastrointestinal tract in a solubilized state, avoiding dissolution—a restricting factor in absorption rate of BCS Class 2 drugs, including atorvastatin.

Preparation, characterization and in vivo evaluation of curcumin self-nano phospholipid dispersion as an approach to enhance oral bioavailability

The aim of this study was to examine the efficacy of self-nano phospholipid dispersions (SNPDs) based on Phosal(®) to improve the oral bioavailability of curcumin (CUR). SNPDs were prepared with Phosal(®) 53 and Miglyol 812 at different surfactant ratio. Formulations were evaluated for particle size, polydispersity index, zeta potential, and robustness toward dilution, TEM as well as in vitro drug release. The in vivo oral absorption of selected formulations in comparison to drug suspension was evaluated in rats. Moreover, formulations were assessed for in vitro characteristic changes before and after storage. The SNPDs were miscible with water in any ratio and did not show any phase separation or drug precipitation. All the formulas were monodisperse with nano range size from 158±2.6 nm to 610±6.24 nm. They passed the pharmacopeial tolerance for CUR dissolution. No change in dissolution profile and physicochemical characteristics was detected after storage. CUR-SNPDs are found to be more bioavailable compared with suspension during an in vivo study in rats and in vitro release studies failed to imitate the in vivo conditions. These formulations might be new alternative carriers that enhance the oral bioavailability of poorly water-soluble molecules, such as CUR.