Long period fiber grating in two-core hollow eccentric fiber

Long period fiber gratings (LPGs) in a two-core hollow eccentric fiber (TCHF) have been demonstrated experimentally. Two LPGs have been fabricated into the respective core of the TCHF by a high frequency CO2 laser. The coupling characteristics in the TCHF-LPG have been studied using the coupling mode theory (CMT). The resonant peak is mainly caused by the coupling between the core mode LP01 and cladding mode LP81. The experimental results agree well with the simulation results. Furthermore, the sensing properties of the TCHF-LPG have been investigated with respect to bending, temperature and axial strain. Compared with the LPG in the single mode fiber (SMF), the experimental results indicate that the sensitivity of the TCHF-LPGs to bending curvature is low and even very small at some bending directions. In addition, TCHF-LPGs are insensitive to the axial strain while sensitive to the temperature. Therefore, the proposed TCHF-LPGs can efficiently sense the changing temperature that is independent of the strain. Moreover, the TCHF-LPGs can also be applied to two-channel filters without signal crosstalk between two cores.

Ultrawidely tunable single-mode fiber acousto-optic filter

A single-mode fiber (SMF) acousto-optic tunable filter (AOTF) with a tuning range of more than 300 nm is demonstrated. The SMF used in the experiment has a ring of symmetric holes within the cladding, which causes a larger mode-index difference between the first and the second higher-order antisymmetric modes than those of a conventional SMF. As a result, the difference in beatlengths between the core mode and the higher-order modes is highly increased, which makes it possible for the SMF AOTF to exhibit a single resonance peak in the transmission spectrum over the wavelength range of 1.3-1.6 μm for given acoustic frequencies of 3.1-3.8 MHz.