Clinical Behaviour and Marginal Sealing of Bulk-Fill Resin Composite Restorations Using Light Amplified High-Intensity LEDs Curing: A Randomized Controlled Clinical Trial

Light-curing process for clear aligners' attachment reproduction: comparison between two nanocomposites cured by the auxiliary of a new tool

BACKGROUND

Attachments' configuration play an important role during Clear Aligner Treatment (CAT) for aligner retention and control of movements planned. The aims were to compare the macroscopic morphology of attachments reproduced with flowable (FNC) and conventional (CNC) composites and the effects on them of two light-guide tips with different dimensions.

METHODS

4 resin casts derived from the initial scan of the same patient were obtained. 10 vestibular attachments were replaced on both upper and lower arches of each model with CNC (Models A, B) and FNC (Models C, D). Each composite was cured by means of the same LED lamp with both regular light-guide (Models A, B) and push and light tool® (Models C, D). The 80 attachments were qualitative analyzed by means of a digital stereo microscope. Surface roughness and waviness measurements were assessed by contact probe surface profiler (TalySurf CLI 2000; Taylor Hobson, Leicester, United Kingdom). Statistical analysis was performed with independent samples t-tests. Significance was established at the P < 0.05 level.

RESULTS

Model A showed lower values of surface roughness (Ra - 1.41 µm, Rt - 3.46 µm) and waviness (Wa - 2.36 µm, Wt - 10.95 µm) when compared with Model C. Significant reduction of waviness (Wa - 3.85 µm, Wt - 4.90 µm) was observed on Model B when compared with Model D. Significant increase of roughness and waviness parameters (Ra 3.88 µm, Rt 21.07, Wa 2.89 µm, Wt 14.74 µm) was found when CNC sample (Model A) was cured with regular light-guide tip. Higher values (Ra 2.33 µm, Rt 24.07 µm, Wa 1.67 µm, Wt 20.79 µm) were observed after regular light-guide tips curing on FNC sample (Model C).

CONCLUSIONS

CNC resins determine more regular surfaces of attachments profiles. The additional use of a smaller light- guide of the LED push and light tool® allows to improve the macroscopic morphology of the attachments and to maximize light irradiance delivering by enhancing the polymerization process and the integrity of the features during the treatment.

Compliance of randomized controlled trials in posterior restorations with the CONSORT statement: a systematic review of methodology

OBJECTIVES

This study aims to investigate the compliance of randomized controlled trials (RCTs) in posterior restorations with the Consolidated Standards of Reporting Trials Statement (CONSORT) statement and to analyze the risk of bias (RoB) of these studies.

METHODS

A systematic search was performed in PubMed, Scopus, Web of Science, LILACS/BBO, and Cochrane Library. Only RCTs published in peer-reviewed journals were included. The compliance with the CONSORT was evaluated in a 0-2 scale where 0 = no description, 1 = poor description and 2 = adequate description. Descriptive analyses of the CONSORT mean score by journal, country, and RoB were performed. The RoB in RCTs was evaluated by using the Cochrane Collaboration's tool version 1.0.

RESULTS

A total of 15,476 studies were identified after duplicates removal. O only 202 meet the eligibility criteria, among which 31 were follow-up studies. Concerning the overall RoB, only 29 out of 171 were classified as low risk of bias. The overall mean CONSORT score was 19 ± 5.4 points, which means compliance of approximately 59%. Significant differences among countries, publication period, and RoB were observed (p < 0.001). The journal's impact factor was not correlated with the overall CONSORT score (p = 0.36).

CONCLUSIONS

The adherence of RCTs conducted in posterior restorations to the CONSORT Statement is still low. In addition, most studies were classified as at unclear risk of bias. These results call up an urgent need for improvement.

CLINICAL RELEVANCE

Most RCTs conducted in posterior teeth have poor reporting and are mainly classified as having an unclear risk of bias.

The Effect of Irradiance on the Degree of Conversion and Volumetric Polymerization Shrinkage of Different Bulk-Fill Resin-Based Composites: An In Vitro Study

Objective  The influence of different light-emitting diode (LED) curing light intensities on the degree of conversion (DC) and volumetric polymerization shrinkage (VPS) of bulk-fill resin-based composite (RBC) restorative materials was evaluated.

Materials and Methods  Twenty-four specimens of each RBC material (Filtek one bulk-fill posterior, Reveal HD Bulk, Tetric N-Ceram, and Filtek Z350) were prepared. The RBCs were shaped in molds and cured using an LED curing light unit at high-intensity (1,200 mW/cm ² ) for 20 seconds and low-intensity (650 mW/cm ² ) for 40 seconds Fourier-transform infrared (FTIR) spectroscopy was used to determine the DC and microcomputed tomography was used to evaluate VPS. Data were analyzed using one- and two-way ANOVA, independent t -test, and Tukey’s and Scheffe’s post hoc multiple comparison tests.

Results  With high-intensity curing light, Reveal HD showed the highest DC (85.689 ± 6.811%) and Tetric N-Ceram the lowest (52.60 ± 9.38%). There was no statistical difference in VPS when using high- or low-intensity curing light. The highest VPS was observed for Reveal HD (2.834–3.193%); there was no statistical difference ( p > 0.05) among the other RBCs.

Conclusion  Curing light intensities do not significantly influence the VPS of RBC materials. Reveal HD bulk cured with high-intensity light had the highest DC.