Cellular response of chondrocytes to magnesium alloys for orthopedic applications

Three Birds, One Stone: An Osteo-Microenvironment Stage-Regulative Scaffold for Bone Defect Repair through Modulating Early Osteo-Immunomodulation, Middle Neovascularization, and Later Osteogenesis

In order to repair critical-sized bone defects, various polylactic acid-glycolic acid (PLGA)-based hybrid scaffolds are successfully developed as bone substitutes. However, the byproducts of these PLGA-based scaffolds are known to acidify the implanted site, inducing tiresome acidic inflammation. Moreover, these degradation productions cannot offer an osteo-friendly microenvironment at the implanted site, matching natural bone healing. Herein, inspired by bone microenvironment atlas of natural bone-healing process, an osteo-microenvironment stage-regulative scaffold (P80/D10/M10) is fabricated by incorporating self-developed decellularized bone matrix microparticles (DBM-MPs) and multifunctional magnesium hydroxide nanoparticles (MH-NPs) into PLGA with an optimized proportion using low-temperature rapid prototyping (LT-RP) 3D-printing technology. The cell experiments show that this P80/D10/M10 exhibits excellent properties in mechanics, biocompatibility, and biodegradability, meanwhile superior stimulations in osteo-immunomodulation, angiogenesis, and osteogenesis. Additionally, the animal experiments determined that this P80/D10/M10 can offer an osteo-friendly microenvironment in a stage-matched pattern for enhanced bone regeneration, namely, optimization of early inflammation, middle neovascularization, and later bone formation. Furthermore, transcriptomic analysis suggested that the in vivo performance of P80/D10/M10 on bone defect repair is mostly attributed to regulating artery development, bone development, and bone remodeling. Overall, this study reveals that the osteo-microenvironment stage-regulative scaffold provides a promising treatment for bone defect repair.

In vitro and in vivo degradation assessment and preventive measures of biodegradable Mg alloys for biomedical applications

Magnesium (Mg) and its alloys have been widely explored as a potential biodegradable implant material. However, the fast degradation of Mg-based alloys under physiological environment has hindered their widespread use for implant applications till date. The present review focuses on in vitro and in vivo degradation of biodegradable Mg alloys, and preventive measures for biomedical applications. Initially, the corrosion assessment approaches to predict the degradation behavior of Mg alloys are discussed along with the measures to control rapid corrosion. Furthermore, this review attempts to explore the correlation between in vitro and in vivo corrosion behavior of different Mg alloys. It was found that the corrosion depends on experimental conditions, materials and the results of different assessment procedures hardly matches with each other. It has been demonstrated the corrosion rate of magnesium can be tailored by alloying elements, surface treatments and heat treatments. Various researches also studied different biocompatible coatings such as dicalcium phosphate dihydrate (DCPD), β-tricalcium phosphate (β-TCP), hydroxyapatite (HA), polycaprolactone (PCL), polylactic acid (PLA), and so on, on Mg alloys to suppress rapid degradation and examine their influence on new bone regeneration as well. This review shows the need for a standard method of corrosion assessment to predict the in vivo corrosion rate based on in vitro data, and thus reducing the in vivo experimentation.

Biodegradable JDBM coating stent has potential to be used in the treatment of benign biliary strictures

In our previous study, to find out the optimal alloy suitable for biliary surgery, magnesium alloy Jiao Da Bio-magnesium (denoted as JDBM) alloy, Zn-3Cu alloys, and their respective coating (MgF₂-PDLLA) products were produced for our research. We found that JDBM seems to be a potential material for clinical biliary stent application due to its uniform degradation and good compatibility. In order to apply the JDBM alloy to treat benign bile duct stricture, our group prepared the bare JDBM and its coating product into finished stents by mesh weaving carving technology and conducted the mechanical property tests, degradation tests and biocompatibility tests. During the mechanical property tests, we found the bare JDBM stent was more suitable than titanium alloy stent when applies to the bile duct, and the coating of the JDBM coating stent has no effect on its mechanical properties. Our in vitro and in vivo experiments revealed that the degradation rate of the JDBM coating stent is lower than that of the JDBM stent, and both stents were biosafe. Thus, there is promise for JDBM coating stents for the treatment of benign biliary strictures.

Biocompatible and functional inorganic magnesium ceramic particles for biomedical applications

Magnesium ceramics hold promise for numerous biological applications. This review covers the synthesis of magnesium ceramic particles with specific morphologies and potential modification techniques. Magnesium ceramic particles possess multiple characteristics directly applicable to human biology; they are anti-inflammatory, antibacterial, antiviral, and offer anti-cancer effects. Based on these advantages, magnesium hydroxide nanoparticles have been extensively utilized across biomedical fields. In a vascular stent, the incorporation of magnesium ceramic nanoparticles enhances re-endothelialization. Additionally, tissue regeneration for bone, cartilage, and kidney can be promoted by magnesium ceramics. This review enables researchers to identify the optimum synthetic conditions to prepare magnesium ceramics with specific morphologies and sizes and select the appropriate modification protocols. It is also intended to elucidate the desirable physicochemical properties and biological benefits of magnesium ceramics.

Synergistic effect of deep ball burnishing and HA coating on surface integrity, corrosion and immune response of biodegradable AZ31B Mg alloys

The fast degradation and consequent loss of mechanical integrity is a major problem of biodegradable Mg alloy, which limits its clinical viability. This paper presents the influence of a synergistic approach combining deep ball burnishing and hydroxyapatite (HA) coating on biomechanical integrity, degradation and immune response of Mg alloy (AZ31B). The burnishing resulted in smooth surface topography, increased hardness from 0.87 to 1.45 GPa and induced microstructural disturbances with deformation twins/twin bands, which enabled formation of a dense and compact platelet-like crystals HA coating of 110 μm thickness. Compared to the untreated and burnished specimens, the burnished + HA coated surface provided remarkably higher corrosion resistance as indicated by lower corrosion current density and smaller mass loss. HA coating and surface integrity enhancement by burnishing were predominantly responsible for improved corrosion resistance. HA coating on the burnished surface exhibited hydrophilic properties and adequate bonding strength. While the modified surfaces promoted cell growth, the burnished + HA surface outperformed in exhibiting less pro-inflammatory and high anti-inflammatory cytokines, demonstrating that the treated surfaces were not posing any threat to immune cells. The findings indicate that the synergistic surface treatment can be a viable means to enhance corrosion resistance and immune response of Mg alloys implants.

In vitro bioactivity of AH plus with the addition of nano-magnesium hydroxide

Background

AH Plus (AH) has been widely used as a root canal sealer in the endodontic field due to its superior physicochemical properties. However, clinical application of AH is limited due to its weak bioactivity.

Methods

In this study, we have developed an AH cement containing nano-magnesium hydroxide (NMH) as an additive to enhance the bioactivity of AH. The NMH can neutralize pH and facilitate bone formation. The objective of this study was to evaluate the effects of NMH and modified AH on osteoblasts behavior in vitro. The CCK-8, alkaline phosphatase (ALP) staining, and real-time polymerase chain reaction (PCR) assays were used to assess the proliferation and differentiation of MC3T3-E1 cells, respectively. The adhesion and spreading of MC3T3-E1 cells were investigated in vitro by scanning electron microscopy (SEM). Meanwhile, the flow and magnesium ion release of the modified AH was also concerned.

Results

In vitro cell assays further showed that the addition of NMH into AH cement, which was denoted as modified AH (especially AH+3%NMH), could effectively improve the proliferation and osteogenic differentiation of MC3T3-E1 cells.

Conclusions

Taken all together, we believe that the modified AH samples (especially AH+3%NMH) have outstanding biocompatibility and osteogenic properties and may have great potential in endodontic field.

Comparative assessment of the biocompatibility and degradation behavior of Zn-3Cu and JDBM alloys used for biliary surgery

This study was designed to investigate the biocompatibility and the degradation behavior of a Zn-3Cu alloy, a Zn-3Cu coating alloy, a Mg-Nd-Zn-Zr (denoted as JDBM) alloy and a JDBM coating alloy to choose the optimal alloy for common bile duct (CBD) surgery. In the in vitro degradation experiments, we observed the surface morphology of the samples and determined the elements of the corrosion products. In the in vitro cytotoxicity experiments, the cell morphology and cytotoxicity were observed and tested. In the in vivo experiments, in addition to analyzing the samples, we also analyzed the variations in serum magnesium, serum creatinine (CREA), blood urea nitrogen (BUN), total bilirubin (TB) and glutamic pyruvic transaminase (GPT). Moreover, important tissue samples from the CBD, liver, kidney and spleen were taken for histological evaluation. The in vitro degradation experiments revealed that the surface corrosion of the JDBM and JDBM coating alloys were more obvious than that of Zn-3Cu and Zn-3Cu coating alloys, and the degradation rate of the JDBM coating alloy was the slowest. The in vitro cytotoxicity assessment showed that the JDBM alloy and JDBM coating alloy extracts were biologically safe for L-929 cells, while the Zn-3Cu alloy and Zn-3Cu coating alloy extracts were harmful to L-929 cells. In the in vivo experiments, neither the JDBM alloy nor the JDBM coating alloy affected the function or morphology of the bile duct, liver, kidney or spleen. Similar to the in vitro degradation behavior, the surface corrosion of the JDBM alloy was more significant than that of the JDBM coating alloy. Our data suggested that the JDBM coating alloy is a safe, biodegradable material for CBD surgery.

Influence of proteins on the corrosion behavior of a chitosan-bioactive glass coated magnesium alloy

The current study explored the degradation behavior of a WE43 Mg alloy during immersion tests in Dulbecco's Modified Eagle's Medium (DMEM) for 3d and 7d, for a bare alloy surface as well as for samples with surface pre-treatment, and finally for samples coated with chitosan-bioactive glass. The immersion tests were conducted with and without addition of serum, to study the influence of proteins on the degradation process. Mass-loss was measured to determine the corrosion rate after 3d and 7d of immersion. The samples were analyzed by SEM with respect to their surface morphology and the chemical composition was screened by high-resolution XPS. The results demonstrate not only a significant, time-dependent influence of serum addition on the corrosion behavior of the materials studied, but noteworthy is that depending on the sample type, proteins in solution were observed to either accelerate or inhibit corrosion. These results are discussed in correlation to observed changes in surface chemistry taking place upon immersion in the absence and presence of proteins.

Synergistically enhanced osteoconductivity and anti-inflammation of PLGA/β-TCP/Mg(OH)2 composite for orthopedic applications

Synthetic biodegradable polymers including poly(lactide-co-glycolide) (PLGA) have been widely used as alternatives to metallic implantable materials in the orthopedic field due to their superior biocompatibility and biodegradability. However, weak mechanical properties of the biodegradable polymers and inflammatory reaction caused by the acidic degradation products have limited their biomedical applications. In this study, we have developed a PLGA composite containing beta-tricalcium phosphate (β-TCP) and magnesium hydroxide (Mg(OH)₂) as additives to improve mechanical, osteoconductivity, and anti-inflammation property of the biopolymer composite simultaneously. The β-TCP has an osteoconductive effect and the Mg(OH)₂ has a pH neutralizing effect. The PLGA/inorganic composites were uniformly blended via a twin extrusion process. The mechanical property of the PLGA/β-TCP/Mg(OH)₂ composite was improved compared to the pure PLGA. In particular, the addition of Mg(OH)₂ suppressed the inflammatory reaction of normal human osteoblast (NHOst) cells and also inhibited the differentiation of pre-osteoclastic cells into osteoclasts. Moreover, synergistically upregulated late osteogenic differentiation of NHOst cells was observed on the PLGA/β-TCP/Mg(OH)₂ composite. Taken all together, we believe that the use of β-TCP and Mg(OH)₂ as additives with synthetic biodegradable polymers has great potential by the synergistic effect in orthopedic applications.

Effects of degradable osteosynthesis plates of MgYREZr alloy on cell function of human osteoblasts, fibroblasts and osteosarcoma cells

The aim was to evaluate the biocompatibility of osteosynthesis plates of the MgYREZr/WE43 alloy by using human cells in vitro. Eluates of degradable magnesium osteosynthesis plates as well as halved plates were used for incubation with human osteoblasts, fibroblasts and osteosarcoma cells. The cell viability was evaluated by using FDA/PI-Staining and LDH analysis. Cell proliferation was assessed by MTT, WST-Test and BrdU-ELISA. Scanning electron microscope was used for investigation of the cell adhesion. The number of devitalized cells in all treatment groups did not significantly deviate from the control group. According to MTT results, the number of metabolically active cells was not significantly affected by the addition of the eluates. The number of metabolically active cells was reduced by 24 to 38% compared to the control on incubation in direct contact with the osteosynthesis plates. The proliferation of the cells was inhibited by the addition of the eluates. While the eluate of the half-hour elution has only a very small effect, the 24 h eluate significantly inhibits proliferation by 23-25% compared to the control. The roughened surface of the magnesium osteosynthesis plate after incubation showed adherent cells. However, some areas of the plates were also free of adherent cells. WE43 based magnesium alloys showed favorable biocompatibility considering the viability of the cells evaluated; however, proliferation rates were reduced in a time dependent manner, especially in fibroblast group. This might be a potential clinical benefit of magnesium osteosynthesis plates and their superiority to titanium, thus the fibroblastic ingrowth might negatively influence the bone-plate contact.

Characterization and In Vitro and In Vivo Assessment of a Novel Cellulose Acetate-Coated Mg-Based Alloy for Orthopedic Applications

Despite their good biocompatibility and adequate mechanical behavior, the main limitation of Mg alloys might be their high degradation rates in a physiological environment. In this study, a novel Mg-based alloy exhibiting an elastic modulus E = 42 GPa, Mg-1Ca-0.2Mn-0.6Zr, was synthesized and thermo-mechanically processed. In order to improve its performance as a temporary bone implant, a coating based on cellulose acetate (CA) was realized by using the dipping method. The formation of the polymer coating was demonstrated by FT-IR, XPS, SEM and corrosion behavior comparative analyses of both uncoated and CA-coated alloys. The potentiodynamic polarization test revealed that the CA coating significantly improved the corrosion resistance of the Mg alloy. Using a series of in vitro and in vivo experiments, the biocompatibility of both groups of biomaterials was assessed. In vitro experiments demonstrated that the media containing their extracts showed good cytocompatibility on MC3T3-E1 pre-osteoblasts in terms of cell adhesion and spreading, viability, proliferation and osteogenic differentiation. In vivo studies conducted in rats revealed that the intramedullary coated implant for fixation of femur fracture was more efficient in inducing bone regeneration than the uncoated one. In this manner, the present study suggests that the CA-coated Mg-based alloy holds promise for orthopedic aplications.

The improvement of corrosion resistance, biocompatibility and osteogenesis of the novel porous Mg–Nd–Zn alloy

A magnesium scaffold is a promising biodegradable bone repair material.

Biomechanical Properties of a Novel Biodegradable Magnesium-Based Interference Screw

Magnesium-based interference screws may be an alternative in anterior/posterior cruciate ligament reconstruction. The well-known osteoconductive effects of biodegradable magnesium alloys may be useful. It was the purpose of this study to evaluate the biomechanical properties of a magnesium based interference screw and compare it to a standard implant. A MgYREZr-alloy interference screw and a standard implant (Milagro®; De Puy Mitek, Raynham, MA, USA) were used for graft fixation. Specimens were placed into a tensile loading fixation of a servohydraulic testing machine. Biomechanical analysis included pretensioning of the constructs at 20 N for 1 min following cyclic pretensioning of 20 cycles between 20 and 60 N. Biomechanical elongation was evaluated with cyclic loading of 1000 cycles between 50 and 200 N at 0.5 Hz. Maximum load to failure was 511.3±66.5 N for the Milagro® screw and 529.0±63.3 N for magnesium-based screw (ns, P=0.57). Elongations after preload, during cyclical loading and during failure load were not different between the groups (ns, P>0.05). Stiffness was 121.1±13.8 N/mm for the magnesium-based screw and 144.1±18.4 for the Milagro® screw (ns, P=0.32). MgYREZr alloy interference screws show comparable results in biomechanical testing to standard implants and may be an alternative for anterior cruciate reconstruction in the future.