Preservation of bone mineral density of the proximal femur following hemisurface arthroplasty

Effects of physical activity on long-term survivorship after metal-on-metal hip resurfacing arthroplasty: is it safe to return to sports?

AIMS

In previous studies, we identified multiple factors influencing the survivorship of hip resurfacing arthroplasties (HRAs), such as initial anatomical conditions and surgical technique. In addition, the University of California, Los Angeles (UCLA) activity score presents a ceiling effect, so a better quantification of activity is important to determine which activities may be advisable or detrimental to the recovered patient. We aimed to determine the effect of specific groups of sporting activities on the survivorship free of aseptic failure of a large series of HRA.

PATIENTS AND METHODS

A total of 661 patients (806 hips) representing 77% of a consecutive series of patients treated with metal-on-metal hybrid HRA answered a survey to determine the types and amounts of sporting activities they regularly participated in. There were 462 male patients (70%) and 199 female patients (30%). Their mean age at the time of surgery was 51.9 years (14 to 78). Their mean body mass index (BMI) was 26.5 kg/m² (16.7 to 46.5). Activities were regrouped into 17 categories based on general analogies between these activities. Scores for typical frequency and duration of the sessions were used to quantify the patients' overall time spent engaging in sporting activities. Impact and cycle scores were computed. Multivariable models were used.

RESULTS

We found no association between any category of activity and a decrease in survivorship. Impact and hip cycle scores also failed to show any association with revision for aseptic failure or wear.

CONCLUSION

Return to sporting activities after surgery is safe for patients treated with well-designed and well-implanted HRA. Cite this article: Bone Joint J 2019;101-B:1186-1191.

Resurfacing hip arthroplasty better preserves a normal gait pattern at increasing walking speeds compared to total hip arthroplasty

Background and purpose - Gait analysis performed under increased physical demand may detect differences in gait between total (THA) versus resurfacing hip arthroplasty (RHA), which are not measured at normal walking speed. We hypothesized that patients after RHA would reach higher walking speeds and inclines compared with THA. Additionally, an RHA would enable a more natural gait when comparing the operated with the healthy contralateral hip. Patients and methods - From a randomized controlled trial comparing THA with RHA with at least 5 years' follow-up patients with a UCLA score of more than 3 points (n = 34) were included for an instrumented treadmill gait analysis. 25 patients with a unilateral implant (primary analysis-16 THA versus 9 RHA) and 9 patients with a bilateral implant (sub-analysis-n = 5 RHA + THA; n = 4 THA + THA). Spatiotemporal parameters, ground reaction forces, and range of motion were recorded at increasing walking speeds and inclines. Functional outcome scores were obtained. Results - At a normal walking speed of 1.1 m/s and at increasing inclines no differences were recorded in gait between the 2 groups with a unilateral hip implant. With increasing walking speed the RHA group reached a higher top walking speed (TWS) (adjusted difference 0.07 m/s, 95% CI -0.11 to 0.25) compared with THA. Additionally, RHA patients tolerated more weight on the operated side at TWS (155 N, CI 49-261) and as such weight-bearing approached the unaffected contralateral side. For the RHA group a "between leg difference" of 8 N (CI 3-245) was measured versus -129 N (CI -138 to -29) for THA (adjusted difference 144 N, CI 20-261). Hip flexion of the operated side at TWS was higher after RHA compared with THA (adjusted difference 8°, CI 1.7-14). Interpretation - In this study RHA patients reached a higher walking speed, and preserved a more normal weight acceptance and a greater range of hip flexion against their contralateral healthy leg as compared with patients with a THA.

Metal-on-metal hip arthroplasty

In this paper, we will consider the current role of metal-on-metal bearings by looking at three subtypes of MoM hip arthroplasty separately: Hip resurfacing, large head (> 36 mm) MoM THA and MoM THA with traditional femoral head sizes.

Outcomes of total hip replacement in patients with slipped capital femoral epiphysis

BACKGROUND

Total hip replacement has been advocated for the treatment of degenerative hip diseases secondary to slipped capital femoral epiphysis; nonetheless, outcomes of this procedure have not been well established. We reviewed the outcomes of modern total hip replacements in patients who suffered from slipped capital femoral epiphysis.

METHODS

A retrospective study was carried out on 32 total hip replacements performed on 28 patients who suffered from slipped capital femoral epiphysis from August 1994 to January 2007. The average age at the time of surgery was 45 years. Clinical evaluation was performed using the Harris Hip Score, radiographic assessment measuring cup and stem orientation, the extent of osteolysis around the implant, and leg length discrepancy. The average follow-up was 98 months (range 25-204 months).

RESULTS

Two total hip replacements failed, one for stem aseptic loosening and the other for modular neck failure. The cumulative survival rate at 9 years was 92.8 %. If the end point was revision for implant loosening, the survival rate improved to 96.8 % at 9 years. The only complication recorded was an intraoperative fracture of the lesser trochanter immediately treated with cerclage wire. At the latest follow-up, the Harris Hip Score averaged 86 (range 70-97). Leg length discrepancies greater than 1 cm were present in 18 cases before surgery, and in only 6 cases after surgery.

DISCUSSION

We recommend total hip replacement for patients who suffer from slipped capital femoral epiphysis because of the satisfactory survival, low complication rate, and the possibility of restoring leg length.

Pre-clinical evaluation of ceramic femoral head resurfacing prostheses using computational models and mechanical testing

Ceramic-on-ceramic hip resurfacing can potentially offer the bone-conserving advantages of resurfacing while eliminating metal ion release. Thin-walled ceramic resurfacing heads are conceivable following developments in the strength and reliability of ceramic materials, but verification of new designs is required. The present study aimed to develop a mechanical pre-clinical analysis verification process for ceramic resurfacing heads, using the DeltaSurf prosthesis design as a case study.

Finite element analysis of a range of in vivo scenarios was used to design a series of physiologically representative mechanical tests, which were conducted to verify the strength of the prosthesis. Tests were designed to simulate ideal and worst-case in vivo loading and support, or to allow comparison with a clinically successful metallic device.

In tests simulating ideal loading and support, the prosthesis sustained a minimum load of 39 kN before fracture, and survived 10 000 000 fatigue cycles of 0.534 kN to 5.34 kN. In worst-case tests representing a complete lack of superior femoral head bone support or pure cantilever loading of the prosthesis stem, the design demonstrated strength comparable to that of the equivalent metal device.

The developed mechanical verification test programme represents an improvement in the state of the art where international test standards refer largely to total hip replacement prostheses. The case study’s novel prosthesis design performed with considerable safety margins compared with extreme in vivo loads, providing evidence that the proposed ceramic resurfacing heads should have sufficient strength to perform safely in vivo. Similar verification tests should be designed and conducted for novel ceramic prosthesis designs in the future, leading the way to clinical evaluation.

Long-term results of total hip replacement in patients with Legg-Calvé-Perthes disease

BACKGROUND

Total hip replacement in patients with Legg-Calvé-Perthes disease can be difficult because of the multiplanar deformities of the proximal part of the femur and previous surgery during childhood. The aim of the present study was to assess the long-term outcomes of total hip replacement in patients who had Legg-Calvé-Perthes disease during childhood.

METHODS

A retrospective study was carried out to assess the results of thirty-two total hip replacements that had been performed for twenty-seven patients from January 1989 to November 2004. The average age at the time of surgery was 37.8 years. The average duration of follow-up was 124 months (range, fifty-eight to 248 months). All but one of the implants were cementless.

RESULTS

There was only one failure in the present study; specifically, the one cemented stem in the study failed two years after surgery. The cumulative survival rate at fifteen years was 96.9% (95% confidence interval, 90.8% to 100.0%). The overall rate of complications was 12.5%, with two permanent sciatic nerve palsies. At the time of the latest follow-up, the average Harris hip score was 87.5 (range, 73 to 96), which was a marked improvement in comparison with the preoperative score (average, 50.1; range, 25 to 75).

CONCLUSIONS

Despite the high rate of neurological complications, possibly related to excessive limb lengthening or inadequate soft-tissue release, total hip replacement can be considered a feasible option for patients with Legg-Calvé-Perthes disease. Careful preoperative planning is advisable in order to overcome the technical pitfalls related to the abnormal proximal femoral and acetabular anatomy of these patients.

Changes in cobalt and chromium levels after metal-on-metal hip resurfacing in young, active Chinese patients

Metal-on-metal resurfacing arthroplasty is increasingly being performed in young, active patients. Serum and urine metal ion levels are monitored in these patients to assess the physiologic effects of metal-on-metal wear on them. The aim of our prospective study was to evaluate the serum and urine levels of cobalt (Co) and chromium (Cr) in young (age, ≤50 years), active Chinese patients who had undergone metal-on-metal hybrid resurfacing arthroplasties. Levels were measured preoperatively using atomic absorption spectrometry and then sequentially at 3, 6, 9, 12, and 24 months after surgery. For both serum and urine Co and Cr, there was an initial increase to a peak at 6 months, followed by a gradual decline after 6 months, whereas renal function was normal during the study the 2-year study period. There was no radiographic evidence of component loosening. All implants were functioning well. Further long-term studies are needed to observe clinical outcomes and to determine the physiologic effects of the wearing process.

Long term preservation of femoral bone following hemiresurfacing

Long term femoral fixation, bone remodeling and neck preservation are demonstrated histologically in three hips treated with hemiresurfacing. They were performed in young patients for Ficat stage III or early IV osteonecrosis as a "time buying procedure". The cases were revised after 13, 16 and 22 years because of cartilage wear which was anticipated. One head was resurfaced using titanium and two with custom alumina ceramic components. Fixation was achieved using early bone cleansing and cementing techniques. Retrieval analysis found remarkable preservation of bone stock and viability without neck narrowing.

[Results for endoprosthetic care in patients younger than 50 years]

Arthroplasty has become the most successful surgical procedure in developed countries. Replacement of severely damaged joints results in a substantial relief of pain, as the main symptom of osteoarthritis, in the majority of treated patients. With improved results in endoprosthetic surgery over the last decades, however, patients are increasingly undergoing the procedure to enhance their functional capacity and physical mobility. Especially younger patients, who cannot accept a restriction in their professional or sports activity, have become demanding candidates for surgery. This review summarizes the published results on shoulder, hip, knee, ankle and first metatarsophalangeal joint replacement in patients who are younger than 50 years of age. Mid- and long-term follow-up studies in this age group are evaluated in terms of prosthesis survival as well as functional improvement.

Resurfacing THA for patients younger than 50 year: results of 2- to 9-year followup

Resurfacing THA is an attractive treatment option for young patients because it saves the femoral head and is easily revisable. We assessed the clinical outcome of metal-on-metal hybrid total hip resurfacing for the treatment of 295 patients (350 hips) younger than 50 years of age (average, 41.2 years) and compared these results with those of patients 50 years or older (average, 57.4 years) at the time of surgery who were implanted with the same design. Seventy-five percent of the patients were male. The minimum followup was 2 years (mean 5.5 years; range 2-9 years). UCLA hip scores improved to 9.4 for pain; 9.6 for walking; 9.5 for function; and 7.6 for activity. We found no differences in survivorship between younger and older patients, and postoperative clinical scores related to the patients' physical health were comparable. There was no acetabular component loosening. Ten hips (2.8%) were revised for femoral aseptic loosening and one for femoral neck fracture. The 5-year survivorship of hips with good bone quality was 97.8%. There has been no femoral component loosening when the femoral stems were cemented irrespective of bone quality. Metal-on-metal resurfacing THA performs well at short to mid-term followup in young, active adults despite high activity levels.

Management of arthritis of the hip in the young adult

Arthritis of the hip in the young adult can be a disabling condition. Recent years have witnessed extensive research related to the management of this condition. This article reviews the current status with regard to aetiology, diagnosis and treatment of arthritis of the hip in the young adult.

Metal-on-metal hip resurfacing in osteonecrosis of the femoral head

BACKGROUND

The treatment of end-stage osteonecrosis of the femoral head remains a challenge to the orthopaedic surgeon. Historically, total hip arthroplasty for this condition has been associated with poor rates of survival and function when compared with total hip arthroplasty for the treatment of osteoarthritis. The purpose of this study was to determine the medium-term clinical and radiographic results of metal-on-metal hip resurfacing arthroplasty in patients with end-stage osteonecrosis of the femoral head.

METHODS

From June 1994 to March 2004, a consecutive single-surgeon series of seventy-three hip resurfacing procedures were performed in sixty patients for the treatment of end-stage osteonecrosis of the femoral head. The cohort included forty-two men (ten of whom had a bilateral resurfacing) and eighteen women (three of whom had a bilateral resurfacing). The mean age was forty-three years (range, seventeen to sixty-nine years). A clinical and radiographic review was performed.

RESULTS

There were four revision operations and one planned revision of the seventy-three hips during the follow-up period. Two of these revisions were necessitated by aseptic failure of the femoral component. This represents an overall survival rate of 93.2% at a mean of 6.1 years of follow-up (range, two to twelve years).

CONCLUSIONS

On the basis of this study, metal-on-metal resurfacing of the hip for osteonecrosis can be considered a safe and effective form of surgery for this group of patients. Longer-term follow-up is required to confirm the expected continued success of this form of arthroplasty in this difficult-to-treat population.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions to Authors on jbjs.org for a complete description of levels of evidence.

Metal-on-metal hybrid surface arthroplasty. Surgical Technique

BACKGROUND

Following the reintroduction of metal-on-metal articulating surfaces for total hip arthroplasty in Europe in 1988, we developed a surface arthroplasty prosthetic system using a metal-on-metal articulation. The present study describes the clinical and radiographic results of the first 400 hips treated with metal-on-metal hybrid surface arthroplasties at an average follow-up of three and a half years.

METHODS

Between November 1996 and November 2000, 400 metal-on-metal hybrid surface arthroplasties were performed in 355 patients. All femoral head components were cemented, but only fifty-nine of the short metaphyseal stems were cemented. The patients had an average age of forty-eight years, 73% were men, and 66% had a diagnosis of osteoarthritis. Clinical and radiographic follow-up was performed at three months postoperatively and yearly thereafter.

RESULTS

The majority of the patients returned to a high level of activity, including sports, and 54% had activity scores of >7 on the University of California at Los Angeles activity assessment system. Kaplan-Meier survivorship curves demonstrated that the rate of survival of the components at four years was 94.4%. For patients with a surface arthroplasty risk index score of >3, the rate of survival of the components at four years was 89% compared with a rate of 97% for those with a score of <or=3. The patients with a higher risk index were 4.2 times more likely to undergo revision to a total hip replacement at four years. Twelve hips (3%) had a revision to a total hip replacement. Seven of the twelve hips were revised because of loosening of the femoral component, and three were revised because of a femoral neck fracture. Substantial radiolucencies were seen around sixteen uncemented metaphyseal femoral stems. No femoral radiolucencies were observed among the hips in which the metaphyseal stem was cemented. The most important risk factors for femoral component loosening and substantial stem radiolucencies were large femoral head cysts (p = 0.029), patient height (p = 0.032), female gender (p = 0.005), and smaller component size in male patients (p = 0.005).

CONCLUSIONS

The preliminary experience with this hybrid metal-on-metal bearing is encouraging. Optimal femoral bone preparation and component fixation are critical to improving durability. The metal-on-metal hybrid surface arthroplasty is easily revised to a standard femoral component if necessary.

Development rationale for an articular surface replacement: a science-based evolution

Hip resurfacing has an enduring appeal because of the advantages of bone conservation and maximal joint stability. However, a far from satisfactory experience with earlier resurfacing designs led to its virtual disappearance in the 1980s. The concept was reintroduced in the late 1990s. The current generation of resurfacing devices generally consisted of a large-diameter metal-on-metal articulation, the femoral components being cemented and the acetabular components utilizing various forms of cementless fixation. The encouraging medium-term results, with a follow-up of up to 8 years using the current generation of surface replacement joints, combined with favourable reports related to long-term performance of some metal bearings have led to a rapid increase in the use of such components with these devices. This trend is most marked in younger, more active patients who have expectations of restoration of lifestyle in addition to improved mobility and pain relief and in whom failure with conventional total hip replacement is much higher than previously reported with more sedentary patients. The aim of this paper is, firstly, to highlight a number of areas of improvement and, secondly, to explain how these may be addressed by making modifications to the design of both implants and instrumentation and to the surgical technique. The areas identified for improvement were tissue preservation (thinner components, and reduced steps between sizes), acetabular cup issues (fixation, insertion, and positioning), femoral component issues (design, loading, and cementation), improved bearing surface characteristics, and simplified precise instrumentation with a low-trauma surgical technique.