Biomechanical evaluation of 3-part proximal humerus fractures: a cadaveric study

Use of different devices for surgical treatment of proximal humerus fractures in adults: a systematic review

BACKGROUND AND AIM

Proximal humeral fracture is one of the most common osteoporotic fractures in elderly people. The proper treatment choice is controversial. Open reduction and internal fixation (ORIF) with plate and screws is currently the most common treatment for the majority of displaced proximal humeral fractures. The aim of this systematic review is to investigate the surgical treatment outcomes of PHFs, focusing on main used devices and surgical approaches.

METHODS

From the earliest record up to 21 July 2020, two independent authors conducted a systematic review of two medical electronic database (PubMed and Science Direct). To achieve the maximum sensitivity of the search strategy, the following terms were combined: "(proximal NOT shaft NOT distal) AND humeral AND fracture AND (plate OR locking plate OR osteosynthesis NOT nail NOT arthroplasty)" as either key words or MeSH terms. The risk of bias of the included studies was assessed, agreeing to the Cochrane Handbook guidelines.

RESULTS

Thirty-four articles were initially noticed after the term string research in the two electronic databases. Finally, after full-text reading and analyzing the reference list, 8 studies were selected. The mean age recorded was 69.5 years (Range 67-72). All the studies included two-, three-, four-fragments fracture. Seven studies investigated PHILOS (Synthes, Bettlach, Switzerland) implants results, while one investigated CFR-PEEK plate (PEEK Power Humeral Fracture Plate; Arthrex, Naples, Florida, USA) outcomes or other plates. Deltopectoral and Transdeltoid approaches were the more common used.

CONCLUSIONS

Both deltopectoral and transdeltoid approaches are valid approach in plating after proximal humerus fractures, for these reasons, the surgeon experience is crucial in the choice. The more valid implant is still unclear. The develop of prospective randomized comparative studies is strongly encourages.

Biomechanical analysis of plate systems for proximal humerus fractures: a systematic literature review

BACKGROUND

Proximal humerus fractures are the third most common in the human body but their management remains controversial. Open reduction and internal fixation with plates is one of the leading modes of operative treatment for these fractures. The development of technologies and techniques for these plates, during the recent decades, promise a bright future for their clinical use. A comprehensive review of in vitro biomechanical studies is needed for the comparison of plates' mechanical performance and the testing methodologies. This will not only guide clinicians with plate selection but also with the design of future in vitro biomechanical studies. This review was aimed to systematically categorise and review the in vitro biomechanical studies of these plates based on their protocols and discuss their results. The technologies and techniques investigated in these studies were categorised and compared to reach a census where possible.

METHODS AND RESULTS

Web of Science and Scopus database search yielded 62 studies. Out of these, 51 performed axial loading, torsion, bending and/or combined bending and axial loading while 11 simulated complex glenohumeral movements by using tendons. Loading conditions and set-up, failure criteria and performance parameters, as well as results for each study, were reviewed. Only two studies tested four-part fracture model while the rest investigated two- and three-part fractures. In ten studies, synthetic humeri were tested instead of cadaveric ones. In addition to load-displacement data, three-dimensional motion analysis systems, digital image correlation and acoustic emission testing have been used for measurement.

CONCLUSIONS

Overall, PHILOS was the most tested plate and locking plates demonstrated better mechanical performance than non-locking ones. Conflicting results have been published for their comparison with non-locking blade plates and polyaxial locking screws. Augmentation with cement [calcium phosphate or poly(methyl methacrylate)] or allografts (fibular and femoral head) was found to improve bone-plate constructs' mechanical performance. Controversy still lies over the use of rigid and semi-rigid implants and the insertion of inferomedial screws for calcar region support. This review will guide the design of in vitro and in silico biomechanical tests and also supplement the study of clinical literature.

Hybrid blade and locking plate fixation for proximal humerus fractures: a comparative biomechanical analysis

BACKGROUND

Open reduction and internal fixation of proximal humerus fractures can be difficult to achieve adequate, complication free results due to osteopenia of the proximal humerus and unstable fracture patterns. This study aimed to compare the biomechanical properties of a novel hybrid fixed angle blade plate (Fx plate) with an established fixed angle locking plate (PHILOS plate).

METHODS

A two-part fracture was simulated in synthetic composite humeri by creating a transverse osteotomy and 10 mm fracture gap at the surgical neck. After treating the fractures with either an Fx plate or a PHILOS plate, humeral head was fixed and the shaft was displaced in a cantilever fashion. For elastic tests, loading was along the frontal and sagittal plane to achieve varus/valgus and extension/flexion, respectively. In plastic tests, loading was in a varus direction to determine the constructs' resistance to varus collapse.

RESULTS

In elastic tests, both construct types had higher peak load and stiffness in extension/flexion than varus/valgus. Fx plate constructs were significantly stiffer than PHILOS constructs in varus/valgus (mean: 7.590/6.900 vs. 6.609/6.091 N/mm; p < 0.001 for both) but significantly less stiff in extension/flexion (8.770/9.541 vs. 9.533/9.997 N/mm; p < 0.001 for extension, p < 0.05 for flexion). In varus plastic tests, significantly higher peak loads were reported for Fx plate than PHILOS (134.391 vs. 115.531 N; p < 0.001).

CONCLUSIONS

In this fracture gap model, humeri implanted with a novel Fx plate provided higher varus/valgus stiffness but lower extension/flexion stiffness than a more traditional proximal humeral locking plate design (PHILOS).

Mechanical quantification of local bone quality in the humeral head: a feasibility study

OBJECTIVES

Surgical treatment of proximal humerus fractures can be challenging due to osteoporosis. The weak bone stock makes stable implant anchorage difficult, which can result in low primary stability. Accordingly, significant failure rates, even with modern locking plates, are reported in the literature. Intraoperative knowledge of local bone quality could be helpful in improving results. This study evaluates the feasibility of local bone quality quantification using breakaway torque measurements.

MATERIALS AND METHODS

A torque measurement tool (DensiProbe™) was developed to determine local resistance to breakaway offered by the cancellous bone in the humeral head to quantify local bone quality. The tool was adapted to a standard locking plate (PHILOS, Synthes), allowing measurement in the positions of the six humeral head screws, as provided by the aiming device of the plate. Two hundred and seventy measurements were performed in 44 fresh cadaveric human humeri.

RESULTS

Handling of the tool was straight forward and provided reproducible results for the six different positions. The method allows discrimination between the respective positions with statistical significance, and thus provides reliable information on the local distribution of bone quality within the humeral head.

DISCUSSION

This study introduces a new method using breakaway torque to determine local bone quality within the humeral head in real time. Because DensiProbe is adapted to a standard locking plate, there is the potential for intraoperative application. The information provided could enable the surgeon to improve fixation of osteoporotic proximal humerus fractures.

Surgical treatment options in patients with impaired bone quality

BACKGROUND

Bone quality should play an important role in decision-making for orthopaedic treatment options, implant selection, and affect ultimate surgical outcomes. The development of decision-making tools, currently typified by clinical guidelines, is highly dependent on the precise definition of the term(s) and the appropriate design of basic and clinical studies. This review was performed to determine the extent to which the issue of bone quality has been subjected to this type of process.

QUESTIONS/PURPOSES

We address the following issues: (1) current methods of clinically assessing bone quality; (2) emerging technologies; (3) how bone quality connects with surgical decision-making and the ultimate surgical outcome; and (4) gaps in knowledge that need to be closed to better characterize bone quality for more relevance to clinical decision-making.

METHODS

PubMed was used to identify selected papers relevant to our discussion. Additional sources were found using the references cited by identified papers.

RESULTS

Bone mineral density remains the most commonly validated clinical reference; however, it has had limited specificity for surgical decision-making. Other structural and geometric measures have not yet received enough study to provide definitive clinical applicability. A major gap remains between the basic research agenda for understanding bone quality and the transfer of these concepts to evidence-based practice.

CONCLUSIONS

Basic bone quality needs better definition through the systematic study of emerging technologies that offer a more precise clinical characterization of bone. Collaboration between basic scientists and clinicians needs to improve to facilitate the development of key questions for sound clinical studies.