Controversies in Fracture Healing: Early Versus Late Dynamization

Delayed Union and Nonunion: Current Concepts, Prevention, and Correction: A Review

Surgical management of fractures has advanced with the incorporation of advanced technology, surgical techniques, and regenerative therapies, but delayed bone healing remains a clinical challenge and the prevalence of long bone nonunion ranges from 10 to 15% of surgically managed fractures. Delayed bone healing arises from a combination of mechanical, biological, and systemic factors acting on the site of tissue remodeling, and careful consideration of each case's injury-related, patient-dependent, surgical, and mechanical risk factors is key to successful bone union. In this review, we describe the biology and biomechanics of delayed bone healing, outline the known risk factors for nonunion development, and introduce modern preventative and corrective therapies targeting fracture nonunion.

Advances in Dynamization of Plate Fixation to Promote Natural Bone Healing

The controlled dynamization of fractures can promote natural fracture healing by callus formation, while overly rigid fixation can suppress healing. The advent of locked plating technology enabled new strategies for the controlled dynamization of fractures, such as far cortical locking (FCL) screws or active plates with elastically suspended screw holes. However, these strategies did not allow for the use of non-locking screws, which are typically used to reduce bone fragments to the plate. This study documents the first in vivo study on the healing of ovine tibia osteotomies stabilized with an advanced active plate (AAP). This AAP allowed plate application using any combination of locking and non-locking screws to support a wide range of plate application techniques. At week 9 post-surgery, tibiae were harvested and tested in torsion to failure to assess the healing strength. The five tibiae stabilized with an AAP regained 54% of their native strength and failed by spiral fracture through a screw hole, which did not involve the healed osteotomy. In comparison, tibiae stabilized with a standard locking plate recovered 17% of their strength and sustained failure through the osteotomy. These results further support the stimulatory effect of controlled motion on fracture healing. As such, the controlled dynamization of locked plating constructs may hold the potential to reduce healing complications and may shorten the time to return to function. Integrating controlled dynamization into fracture plates that support a standard fixation technique may facilitate the clinical adoption of dynamic plating.

Treatment options, complications and long-term outcomes for limb fractures in pet rabbits

BACKGROUND

Limb fractures represent the most common orthopaedic disease in pet rabbits. However, only a few studies have evaluated therapeutic details of limb fractures. There are no data available for long-term outcomes of limb fracture treatment.

METHODS

The medical records of six institutions were reviewed retrospectively to identify cases of traumatic limb bone fractures in pet rabbits between 1999 and 2020. The medical records (n = 387) were analysed for details of fracture prevalence, aetiology, therapy protocols, treatment complications, outcome and long-term effects. In addition to the retrospective data evaluation, 13 rabbits were re-evaluated in person in recent clinical analyses, including orthopaedic examination, radiography and computed-tomographic imaging. Details of long-term effects of fracture treatment were requested over the telephone for a further 232 animals using a standardised questionnaire.

RESULTS

Long bone fractures accounted for the majority of all fractures (296/387; 76.5%). Hindlimb fractures (301/387; 77.7%) were more common than forelimb fractures (86/387; 22.2%), and tibial fractures and combined fractures of the tibia and fibula (119/387; 30.8%) were observed most frequently. Most fracture treatments were based on osteosynthesis procedures (243/328; 74.1%). Treatment complications occurred in 130 out of 328 (39.6%) cases. A high bodyweight (p = 0.047) and an older age (p = 0.01) were found to be significant risk factors for the emergence of therapy complications. Overall, 75.4% of animals (175/232) had a satisfactory long-term outcome. Limb posture anomalies were evaluated in 61 cases (26.3%).

LIMITATIONS

The multi-centre approach led to the inclusion of various institutions, veterinarians, treatment protocols and rabbit populations that might have influenced the results. The medical records were reviewed retrospectively, so there were some data that were lacking or could not be collected in a standardised manner. Furthermore, rabbit owners' evaluation of long-term outcomes might be prone to error, despite the use of a standardised interview questionnaire.

CONCLUSION

Limb fractures are a common orthopaedic issue in pet rabbits. The patient's bodyweight and age are significant risk factors for the emergence of complications during the fracture treatment process. Long-term orthopaedic effects, such as abnormal limb posture and permanent lameness of the affected limb, were observed regularly.

The combined effects of dynamization time and degree on bone healing

Dynamization, increasing the interfragmentary movement (IFM) by reducing the fixation stiffness from a rigid to a more flexible condition, is widely used clinically to promote fracture healing. However, it remains unknown how dynamization degree (relative change in fixation stiffness/IFM from a rigid to a flexible fixation) affects bone healing at various stages. To address this issue, we used a fuzzy logic-based mechano-regulated tissue differentiation algorithm on published experimental data from a sheep osteotomy healing model. We applied a varied degree of dynamization, from 0 (fully rigid fixation) to 0.9 (90% reduction in stiffness relative to the rigid fixation) after 1, 2, 3, and 4 weeks of osteotomy (R1wF, R2wF, R3wF, and R4wF) and computationally evaluated bone regeneration and biomechanical integrity over the healing process of 8 weeks. Compared with the constant rigid fixation, early dynamization (R1wF and R2wF) led to delays in bone bridging and biomechanical recovery of the osteotomized bone. However, the effect of early dynamization on healing was dependent of the degree of dynamization. Specifically, a higher dynamization degree (e.g., 0.9 for R1wF) led to a prolonged delay in bone bridging and largely unrecovered bending stiffness (48% relative to the intact bone), whereas a moderate degree of dynamization (e.g., 0.5 or 0.7) significantly enhanced bone formation and biomechanical properties of the osteotomized bone. These results suggest that dynamization degree and timing interactively affect the healing process. A combination of early dynamization with a moderate degree could enhance the ultimate biomechanical recovery of the fractured bone.

Current concepts in fracture healing: temporal dynamization and applications for additive manufacturing

Objectives

Current surgical fracture treatment paradigms, which use rigid metallic constructs to heal bones, provide reasonable clinical outcomes; however, they do not leverage recent advances in our understanding of bone healing and mechanotransduction throughout bone healing. The objective of this review was to investigate the efficacy and potential clinical applicability of surgical techniques and implants that deliberately introduce interfragmentary motion throughout the healing process.

Methods

The authors searched PubMed and Google Scholar databases for articles reporting on fracture repair using dynamic locking plates, dynamized surgical techniques, and reverse dynamization. Data collection also included assessment of additively manufactured (AM) implants that provide dynamic mechanical behaviors.

Results

Forty articles were included for final review. It was found that accelerated rates of fracture healing can be achieved with staged 2-part surgeries or dynamic implant designs. Temporal dynamization, where static fixation of bones is followed by the introduction of micromotion and controlled loading, has been shown to improve callus volume and accelerate the healing response. Reverse dynamization, where micromotion is encouraged during early callus formation and arrested later, may represent a significant advance for the treatment of critical defect injuries. Advances in AM techniques will likely provide the ability to create high-resolution implants capable of dynamized and reverse dynamized modalities.

Conclusions

There is no one-size-fits-all approach to optimization of fracture healing. However, it has been clearly demonstrated that fracture treatment can be enhanced by systematically altering the construct stiffness throughout the different phases of healing, which may be achieved with AM implant designs.

Mechanically-regulated bone repair

Fracture healing is a complex, multistep process that is highly sensitive to mechanical signaling. To optimize repair, surgeons prescribe immediate weight-bearing as-tolerated within 24 hours after surgical fixation; however, this recommendation is based on anecdotal evidence and assessment of bulk healing outcomes (e.g., callus size, bone volume, etc.). Given challenges in accurately characterizing the mechanical environment and the ever-changing properties of the regenerate, the principles governing mechanical regulation of repair, including their cell and molecular basis, are not yet well defined. However, the use of mechanobiological rodent models, and their relatively large genetic toolbox, combined with recent advances in imaging approaches and single-cell analyses is improving our understanding of the bone microenvironment in response to loading. This review describes the identification and characterization of distinct cell populations involved in bone healing and highlights the most recent findings on mechanical regulation of bone homeostasis and repair with an emphasis on osteo-angio coupling. A discussion on aging and its impact on bone mechanoresponsiveness emphasizes the need for novel mechanotherapeutics that can re-sensitize skeletal stem and progenitor cells to physical rehabilitation protocols.

Individualized cyclic mechanical loading improves callus properties during the remodelling phase of fracture healing in mice as assessed from time-lapsed in vivo imaging

Fracture healing is regulated by mechanical loading. Understanding the underlying mechanisms during the different healing phases is required for targeted mechanical intervention therapies. Here, the influence of individualized cyclic mechanical loading on the remodelling phase of fracture healing was assessed in a non-critical-sized mouse femur defect model. After bridging of the defect, a loading group (n = 10) received individualized cyclic mechanical loading (8–16 N, 10 Hz, 5 min, 3 × /week) based on computed strain distribution in the mineralized callus using animal-specific real-time micro-finite element analysis with 2D/3D visualizations and strain histograms. Controls (n = 10) received 0 N treatment at the same post-operative time-points. By registration of consecutive scans, structural and dynamic callus morphometric parameters were followed in three callus sub-volumes and the adjacent cortex showing that the remodelling phase of fracture healing is highly responsive to cyclic mechanical loading with changes in dynamic parameters leading to significantly larger formation of mineralized callus and higher degree of mineralization. Loading-mediated maintenance of callus remodelling was associated with distinct effects on Wnt-signalling-associated molecular targets Sclerostin and RANKL in callus sub-regions and the adjacent cortex (n = 1/group). Given these distinct local protein expression patterns induced by cyclic mechanical loading during callus remodelling, the femur defect loading model with individualized load application seems suitable to further understand the local spatio-temporal mechano-molecular regulation of the different fracture healing phases.

Fatigue Crack Growth and Fracture of Internal Fixation Materials in In Vivo Environments-A Review

The development of crack patterns is a serious problem affecting the durability of orthopedic implants and the prognosis of patients. This issue has gained considerable attention in the medical community in recent years. This literature focuses on the five primary aspects relevant to the evaluation of the surface cracking patterns, i.e., inappropriate use, design flaws, inconsistent elastic modulus, allergic reaction, poor compatibility, and anti-corrosiveness. The hope is that increased understanding will open doors to optimize fabrication for biomedical applications. The latest technological issues and potential capabilities of implants that combine absorbable materials and shape memory alloys are also discussed. This article will act as a roadmap to be employed in the realm of orthopedic. Fatigue crack growth and the challenges associated with materials must be recognized to help make new implant technologies viable for wider clinical adoption. This review presents a summary of recent findings on the fatigue mechanisms and fracture of implant in the initial period after surgery. We propose solutions to common problems. The recognition of essential complications and technical problems related to various approaches and material choices while satisfying clinical requirements is crucial. Additional investigation will be needed to surmount these challenges and reduce the likelihood of fatigue crack growth after implantation.