Flap Quality in Single Versus Multiple Use of the Same Blade in the Flapmaker Microkeratome

[Corneal power after descemet stripping automated endothelial keratoplasty (DSAEK) - Modeling and concept for calculation of intraocular lenses]

BACKGROUND AND PURPOSE

Descemet stripping automated endothelial keratoplasty (DSAEK) is an established treatment option for pathologies of the corneal endothelium. It is typically accompanied with a hyperopic shift in refraction. The purpose of this work is to predict corneal geometry after DSAEK based on model data and to present a concept how to determine corneal power, e.g. for intraocular power calculation to prevent a refractive surprise with a subsequent cataract surgery.

MATERIAL AND METHODS

Based on data of the Kooijman schematic model eye we simulated a microkeratome cut parallel to the corneal front surface for donor trephination to determine the radial thickness profile of the posterior corneal donor lamella. This donor lamella was tension-neutrally adapted to the back surface of the host and the profile of the cornea after DSAEK was derived and characterized by a quadric surface. Comparison with the curvature of the host without and with donor could resample hyperopic shift which was published in literature. A method was shown how to determine corneal power after DSAEK.

RESULTS

From the data of the Kooijman schematic model eye and the donor characteristics central / peripheral corneal thickness was increased by 150 / 250μm due to adaptation of the donor lamella. Geometry of corneal back surface showed a reduced radius of curvature (by about 0.9mm) and a change in conic constant (by about -0.13). Persistent clinically observed hyperopic shift correlates to the change in geometry of the cornea due to adaptation of the donor lamella, which reduces corneal power by 0.88 D.

CONCLUSION

DSAEK leads to a hyperopic shift in refraction, which can be explained by a change in corneal back surface geometry. In case of subsequent cataract surgery, the intraocular lens power should be calculated with consideration of both corneal surfaces rather than keratometry or corneal topography in order to minimize a systematic hyperopic shift due to misinterpretation of corneal power after DSAEK. In case of a Triple-DSAEK, a target refraction of -1.5 D should be chosen in order to safely prevent postoperative hyperopia.

Probability Model of the Inaccuracy of Residual Stromal Thickness Prediction to Reduce the Risk of Ectasia After LASIK Part I: Quantifying Individual Risk

PURPOSE

To measure the imprecision of microkeratome cuts, preoperative corneal pachymetry, and laser ablation depth and develop a statistical model to describe the probability of the residual stromal bed thickness (RST) after myopic LASIK being significantly thinner than predicted.

METHODS

Preoperative corneal thickness, flap thickness, ablation depth, and RST were measured in 36 eyes by a prototype three-dimensional very high-frequency (VHF) 50 MHz digital ultrasound scanning device (<1.2 microm precision), precursor to the commercially available Artemis 2. All eyes had undergone LASIK with the Moria LSK-One microkeratome and the NIDEK EC-5000 excimer laser. Based on the statistically combined uncertainty (standard deviation) and bias (accuracy to intended value) of corneal thickness measurement, flap thickness, and ablation depth, a continuous probability function was devised describing the chance of obtaining an actual RST less than a specified "cut-off". The model was applied using the data collected from the cohort of eyes. The model was also applied using published flap thickness statistics on a series of microkeratomes.

RESULTS

Precision (standard deviation) was 0.74 microm for VHF digital ultrasound measurement of pachymetry, 30.3 microm for Moria LSK-One flap thickness, and 11.2 microm for NIDEK EC-5000 ablation depth. Assuming negligible laser ablation depth bias, the model found the probability that the actual RST will be <200 pmicromgiven a target RST of 250 microm is 7.56% with the Moria LSK-One. The model applied to published flap statistics revealed a range of probabilities of leaving <200 microm given a target RST of 250 microm from <0.01% to 33.6%.

CONCLUSIONS

The choice of microkeratome, laser, and pachymeter has a significant impact on the variation of the depth of keratectomy and thus on the risk of ectasia. This model together with high-precision microkeratomes, preoperative pachymetry, and knowledge of laser ablation precision would enable surgeons to determine the specific imprecision of RST prediction for individual LASIK cases and minimize the risk of ectasia.

Probability Model of the Inaccuracy of Residual Stromal Thickness Prediction to Reduce the Risk of Ectasia After LASIK Part II: Quantifying Population Risk

PURPOSE

To derive a statistical model to estimate the rate of excessive keratectomy depth below a selected cut-off residual stromal thickness (RST) given a minimum target RST and specific Clinical Protocol; apply the model to estimate the RST below which ectasia appears likely to occur and back-calculate the safe minimum target RST that should be used given a specific Clinical Protocol.

METHODS

Myopia and corneal thickness distribution were modeled for a population of 5212 eyes that underwent LASIK. The probability distribution of predicted target RST error (Part I) was used to calculate the rate of excessive keratectomy depth for this series. All treatments were performed using the same Clinical Protocol; one surgeon, Moria LSK-One microkeratome, NIDEK EC-5000 excimer laser, Orbscan pachymetry, and a minimum target RST of 250 microm--the Vancouver Clinical Protocol. The model estimated the RST below which ectasia appears likely to occur and back-calculated the safe minimum target RST. These values were recalculated for a series of microkeratomes using published flap thickness statistics as well as for the Clinical Protocol of one of the authors-the London Clinical Protocol.

RESULTS

In the series of 5212 eyes, 6 (0.12%) cases of ectasia occurred. The model predicted an RST of 191 microm for ectasia to occur and that a minimum target RST of 329 microm would have reduced the -rate of ectasia to 1: 1,000,000 for the Vancouver Clinical Protocol. The model predicted that the choice of microkeratome varied the rate of ectasia between 0.01 and 11,623 eyes per million and the safe minimum target RST between 220 and 361 microm. The model predicted the rate of ectasia would have been 0.000003: 1,000,000 had the London Clinical Protocol been used for the Vancouver case series.

CONCLUSIONS

There appears to be no universally safe minimum target RST to assess suitability for LASIK largely due to the disparity in accuracy and reproducibility of microkeratome flap thickness. This model may be used as a tool to evaluate the risk of ectasia due to excessive keratectomy depth and help determine the minimum target RST given a particular Clinical Protocol.

The effects of epithelial viability on stromal keratocyte apoptosis in porcine corneas stored in Optisol-GS

PURPOSE

To investigate the effect of corneal epithelium on the viability of corneal stromal keratocytes in Optisol-GS.

METHODS

After sterilization, corneoscleral buttons were excised and stored in Optisol-GS for various time periods. Group 1 corneas (n = 40) underwent mechanical corneal epithelial debridement before storage while group 2 corneas (n = 40) were stored with intact epithelium. Changes in corneal thickness, keratocyte density, and keratocyte apoptosis were investigated immediately, at 4 hours, and on days 1, 2, 3, 5, 7, and 14 in the preservation medium. The differences between group 1 and 2 corneas were analyzed.

RESULTS

Corneal thickness increased significantly in the second week of preservation in both groups, though more substantially in group 1. Significant corneal epithelial apoptosis was noticed in the first week in group 2 corneas. Corneal stromal keratocyte density decreased with prolonged preservation time. DNA laddering was detected by ligation-mediated polymerase chain reaction throughout the experiment periods in both groups, but the increase of keratocyte apoptosis was more significant after 5 days of preservation, especially in group 1.

CONCLUSIONS

Stromal keratocytes underwent apoptosis in Optisol-GS. The absence of corneal epithelium during preservation further increased the stromal keratocyte apoptosis.