Seaweed Superheroes: Cystoseira barbata-Incorporated Electrospun Fibers for Lead Ion Sequestration

The efficient removal of lead ions at low concentrations is paramount in combating the significant threat posed by water pollution resulting from industrial activities and population growth. In this study, electrospun C. barbata/PAN fibers were developed to efficiently remove lead(II) ions from water. The morphology, structure, and mechanical properties of the fibers were examined, highlighting that the augmentation of the surface area through the conversion of C. barbata into the polymer fibers facilitates increased metal bonding sites during sorption. C. barbata/PAN fibers exhibited superior characteristics, including higher surface area, smaller pore size, and increased pore volume, compared to powdered C. barbata. The effects of factors such as shaking time, algae percentage, sorbent amount, pH, metal concentration, and temperature on Pb(II) sorption were investigated by the batch method. At an initial ion concentration of 100 μg L-1 and pH 4.0, C. barbata (5 wt %)/PAN fiber demonstrated a notable sorption efficiency of 89-90% (270 μg/g) after 60 min. The equilibrium data align with the Freundlich and Dubinin-Radushkevich isotherm models, whereas the pseudo-second-order kinetic model provides the most suitable description. The characterization of fibers after sorption revealed that carboxyl, hydroxyl, and sulfonyl groups play an active role in Pb(II) sorption.

Growth of marine macroalgae Ectocarpus sp. on various textile substrates

Marine macroalgae are cultivated for diverse applications, from biofuel and biogas to biofiltering, from food to cosmetics or pharmaceuticals. Since macroalgae cultivation does not compete with land-based food crops for the necessary arable land or fresh water, it can increase the possibilities of sustainably harvested biomass. New technologies permit even land-based growing of marine macroalgae, besides the more common coastal or offshore cultivation. All these technologies, however, raise the question of how to provide ideal cultivation conditions, especially for adherent macroalgae, and of how to harvest them economically and sustainably. While some reports about growing marine macroalgae on diverse textile materials, such as polyester ropes or polypropylene nets, can be found in the literature, we report here for the first time on the growth of a marine macroalga on knitted fabrics. In our study, Ectocarpus sp. was cultivated in shallow rectangular cultivation vessels on knitted fabrics of various materials and structures revealing a significant influence of both parameters. Undesired changes of the pH value in the cultivation system as well as foam generation were attributed to textile auxiliaries. Considering all these influences, the best-suited knitted fabrics were identified as open-pore structures from hairy yarns made partly or completely from natural fibres.

Electrospun PVP/PVA Nanofiber Mat as a Novel Potential Transdermal Drug-Delivery System for Buprenorphine: A Solution Needed for Pain Management

Over the past several decades, the formulation of novel nanofiber-based drug-delivery systems has been a frequent focus of scientists around the world. Aiming to introduce a novel nanofibrous transdermal drug-delivery system to treat pain, the nanofiber mats of buprenorphine-loaded poly (vinyl pyrrolidone) (Bup/PVP) and buprenorphine-loaded poly(vinyl alcohol)/poly(vinyl pyrrolidone) (Bup/PVP/PVA) were successfully fabricated by the electrospinning process for transdermal drug delivery. Similarly, PVP and PVP/PVA nanofibers were fabricated in the same conditions for comparison. The viscosity and electrical conductivity of all electrospinning solutions were measured, and nanofiber mats were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared (FT-IR) spectroscopy and contact angle analysis. The conductivity of PVP and PVP/PVA solutions showed a considerable increase by the addition of buprenorphine due to the polarity of buprenorphine. SEM images showed a smooth, fine and porous nanofibrous structure without any adhesion or knot for all of the samples. The contact angle analysis showed the increased hydrophilicity and wettability of PVP/PVA and Bup/PVP/PVA nanofibers compared to PVP and Bup/PVP nanofibers which can be attributed to the addition of PVA. Attenuated total reflectance (ATR) FT-IR results confirmed that the electrospinning process did not affect the chemical integrity of the drug. For the modification of the drug release rate, the cross-linking of nanofiber mats was carried out using glutaraldehyde. Drug release measurements using high-performance liquid chromatography (HPLC) analysis demonstrated that Bup/PVP/PVA nanofibers exhibited better physical and chemical properties compared to Bup/PVP. Furthermore, the cross-linking of nanofibers led to an increase in drug release time. Thus, the novel buprenorphine-loaded nanofibers can be efficient biomaterial patches for transdermal delivery against pain improving carrier retention and providing a controlled release of the drug.

Hydrophilic Surface-Modified PAN Nanofibrous Membranes for Efficient Oil-Water Emulsion Separation

In order to protect the environment, it is important that oily industrial wastewater is degreased before discharging. Membrane filtration is generally preferred for separation of oily wastewater as it does not require any specialised chemical knowledge, and also for its ease of processing, energy efficiency and low maintenance costs. In the present work, hybrid polyacrylonitrile (PAN) nanofibrous membranes were developed for oily wastewater filtration. Membrane surface modification changed nitrile groups on the surface into carboxylic groups, which improve membrane wettability. Subsequently, TiO₂ nanoparticles were grafted onto the modified membranes to increase flux and permeability. Following alkaline treatment (NaOH, KOH) of the hydrolysed PAN nanofibres, membrane water permeability increased two- to eight-fold, while TiO₂ grafted membrane permeability increase two- to thirteen-fold, compared to unmodified membranes. TiO₂ grafted membranes also displayed amphiphilic properties and a decrease in water contact angle from 78.86° to 0°. Our results indicate that modified PAN nanofibrous membranes represent a promising alternative for oily wastewater filtration.

Seed Germination and Seedling Growth on Knitted Fabrics as New Substrates for Hydroponic Systems

Vertical farming is one of the suggested avenues for producing food for the growing world population. Concentrating the cultivation of crops such as herbs in large indoor farms makes food production susceptible to technical, biological or other problems that might destroy large amounts of food at once. Thus, there is a trend towards locally, self-sufficient food production in vertical systems on a small scale. Our study examined whether conventional knitted fabrics, such as patches of worn jackets, can be used for hydroponics instead of the specialized nonwoven materials used in large-scale indoor systems. To this end, seed germination and seedling growth of 14 different crop plant species on knitted fabrics with three different stitch sizes were compared. Our results showed that hydroponic culture on knitted fabrics are indeed possible and allow for growing a broad spectrum of plant species, suggesting recycling of old textile fabrics for this purpose. Among the 14 plant species studied, differences in germination success, average fresh and dry masses, as well as water contents were found, but these parameters were not affected by knitted fabric stitch size.

Stabilization of Electrospun Nanofiber Mats Used for Filters by 3D Printing

Electrospinning is a well-known technology used to create nanofiber mats from diverse polymers and other materials. Due to their large surface-to-volume ratio, such nanofiber mats are often applied as air or water filters. Especially the latter, however, have to be mechanically highly stable, which is challenging for common nanofiber mats. One of the approaches to overcome this problem is gluing them on top of more rigid objects, integrating them in composites, or reinforcing them using other technologies to avoid damage due to the water pressure. Here, we suggest another solution. While direct 3D printing with the fused deposition modeling (FDM) technique on macroscopic textile fabrics has been under examination by several research groups for years, here we report on direct FDM printing on nanofiber mats for the first time. We show that by choosing the proper height of the printing nozzle above the nanofiber mat, printing is possible for raw polyacrylonitrile (PAN) nanofiber mats, as well as for stabilized and even more brittle carbonized material. Under these conditions, the adhesion between both parts of the composite is high enough to prevent the nanofiber mat from being peeled off the 3D printed polymer. Abrasion tests emphasize the significantly increased mechanical properties, while contact angle examinations reveal a hydrophilicity between the original values of the electrospun and the 3D printed materials.

Wet Relaxation of Electrospun Nanofiber Mats

Electrospinning can be used to produce nanofiber mats. One of the often used polymers for electrospinning is polyacrylonitrile (PAN), especially for the production of carbon nanofibers, but also for a diverse number of other applications. For some of these applications—e.g., creation of nano-filters—the dimensional stability of the nanofiber mats is crucial. While relaxation processes—especially dry, wet and washing relaxation—are well-known and often investigated for knitted fabrics, the dimensional stability of nanofiber mats has not yet been investigated. Here we report on the wet relaxation of PAN nanofiber mats, which are dependent on spinning and solution parameters such as: voltage, electrode distance, nanofiber mat thickness, and solid content in the solution. Our results show that wet relaxation has a significant effect on the samples, resulting in a dimensional change that has to be taken into account for nanofiber mats in wet applications. While the first and second soaking in pure water resulted in an increase of the nanofiber mat area up to approximately 5%, the dried sample, after the second soaking, conversely showed an area reduced by a maximum of 5%. For soaking in soap water, small areal decreases between approximately 1–4% were measured.

New Polymers for Needleless Electrospinning from Low-Toxic Solvents

Electrospinning is a new technology whose scope is gradually being developed. For this reason, the number of known polymer⁻solvent combinations for electrospinning is still very low despite the enormous variety of substances that are potentially available. In particular, electrospinning from low-toxic solvents, such as the use of dimethyl sulfoxide (DMSO) in medical technology, is rare in the relevant scientific literature. Therefore, we present in this work a series of new polymers that are applicable for electrospinning from DMSO. From a wide range of synthetic polymers tested, poly(vinyl alcohol) (PVOH), poly(2ethyl2oxazolene) (PEOZ), and poly(vinylpyrrolidone) (PVP) as water-soluble polymers and poly(styrene-co-acrylonitrile) (SAN), poly(vinyl alcohol-co-ethylene) (EVOH), and acrylonitrile butadiene styrene (ABS) as water-insoluble polymers were found to be suitable for the production of nanofibers. Furthermore, the influence of acetone as a volatile solvent additive in DMSO on the fiber morphology of these polymers was investigated. Analyses of the fiber morphology by helium ion microscopy (HIM) showed significantly different fiber diameters for different polymers and a reduction in beads and branches with increasing acetone content.

Preliminary Study of Ultrasonic Welding as a Joining Process for Electrospun Nanofiber Mats

Electrospinning can be used to create nanofiber mats for diverse applications, from wound dressings and tissue engineering to filters for medical and biotechnological applications. In most of these applications, it is necessary to fix the nanofiber mat on a macroscopic textile fabric, on another nanofiber mat or within a frame to keep it at the desired position. Due to their extremely low thickness and areal mass, however, nanofiber mats are easily destroyed by sewing, and in several situations glued bonds are too thick and not flexible enough. Here we report on ultrasonic welding of polyacrylonitrile nanofiber mats, suggesting this method as a joining process without destruction of the mat morphology for thermoplastic nanofiber mats. A variety of welding patterns results in different adhesion forces between both joined nanofiber mats and different failure mechanisms, with some welding patterns enabling bonding stronger than the mats themselves. Our findings show that ultrasonic welding is a possible joining method for polyacrylonitrile nanofiber mats.

Dye-Sensitized Solar Cells with Electrospun Nanofiber Mat-Based Counter Electrodes

Textile-based dye-sensitized solar cells (DSSCs) can be created by building the necessary layers on a textile fabric or around fibers which are afterwards used to prepare a textile layer, typically by weaving. Another approach is using electrospun nanofiber mats as one or more layers. In this work, electrospun polyacrylonitrile (PAN) nanofiber mats coated by a conductive polymer poly(3,4-ethylenedioxythiopene) polystyrene sulfonate (PEDOT:PSS) were used to produce the counter electrodes for half-textile DSSCs. The obtained efficiencies were comparable with the efficiencies of pure glass-based DSSCs and significantly higher than the efficiencies of DSSCs with cotton based counter electrodes. The efficiency could be further increased by increasing the number of PEDOT:PSS layers on the counter electrode. Additionally, the effect of the post treatment of the conductive layers by HCl, acetic acid, or dimethyl sulfoxide (DMSO) on the DSSC efficiencies was investigated. Only the treatment by HCl resulted in a slight improvement of the energy-conversion efficiency.