Model validation for a noninvasive arterial stenosis detection problem

Computed Poststenotic Flow Instabilities Correlate Phenotypically With Vibrations Measured Using Laser Doppler Vibrometry: Perspectives for a Promising In Vivo Device for Early Detection of Moderate and Severe Carotid Stenosis

Early detection of asymptomatic carotid stenosis is crucial for treatment planning in the prevention of ischemic stroke. Auscultation, the current first-line screening methodology, comes with severe limitations that create urge for novel and robust techniques. Laser Doppler vibrometer (LDV) is a promising tool for inferring carotid stenosis by measuring stenosis-induced vibrations. The goal of the current study was to evaluate the feasibility of LDV for carotid stenosis detection. LDV measurements on a carotid phantom were used to validate our previously verified high-resolution computational fluid dynamics methodology, which was used to evaluate the impact of flowrate, flow split, and stenosis severity on the poststenotic intensity of flow instabilities (IFI). We evaluated sensitivity, specificity, and accuracy of using IFI for stenoses detection. Linear regression analyses showed that computationally derived pressure fluctuations correlated (R2 = 0.98) with LDV measurements of stenosis-induced vibrations. The flowrate of stenosed vessels correlated (R2 = 0.90) with the presence of poststenotic instabilities. Receiver operating characteristic analyses of power spectra revealed that the most relevant frequency bands for the detection of moderate (56-76%) and severe (86-96%) stenoses were 80-200 Hz and 0-40 Hz, respectively. Moderate stenosis was identified with sensitivity and specificity of 90%; values decreased to 70% for severe stenosis. The use of LDV as screening tool for asymptomatic stenosis can potentially provide improved accuracy of current screening methodologies for early detection. The applicability of this promising device for mass screening is currently being evaluated clinically.

Experimental and numerical investigation on soft tissue dynamic response due to turbulence-induced arterial vibration

Peripheral arterial occlusive disease is a serious cardiovascular disorder. The arterial occlusion leads to turbulent flow and arterial sound generation on the inner vessel wall. Stenosis-induced vibro-acoustic waves propagate through the surrounding soft tissues and reach the skin surface. In this study, the feasibility of noninvasive acoustic detection of the peripheral arterial stenosis is investigated using the vibration responses by means of experimental and computational models. Latex rubber tube is used to model the artery, and it is surrounded by a tissue mimicking phantom made of bovine gelatin. Vibration responses on phantom surface are measured using laser Doppler vibrometer, and computational results are obtained performing modal analysis. Experimental findings and computational results showed well agreement in terms of spectral content and vibration amplitudes. The effects of various stenosis severities, flow rates, and phantom thicknesses on the vibration responses are investigated from diagnostic perspective. Stenosis severities greater than 70% resulted in a considerable increase in vibration amplitudes. The structural mode shapes of the tissue phantom are dominant between 0 and 100 Hz, suppressing the signals generated by the stenosis. The optimum range of frequency for acoustic stenosis detection is concluded to be between 200 and 500 Hz, particularly around 300 Hz. Graphical abstract .

Model validation for a noninvasive arterial stenosis detection problem

A current thrust in medical research is the development of a non-invasive method for detection, localization, and characterization of an arterial stenosis (a blockage or partial blockage in an artery). A method has been proposed to detect shear waves in the chest cavity which have been generated by disturbances in the blood flow resulting from a stenosis. In order to develop this methodology further, we use one-dimensional shear wave experimental data from novel acoustic phantoms to validate a corresponding viscoelastic mathematical model. We estimate model parameters which give a good fit (in a sense to be precisely defined) to the experimental data, and use asymptotic error theory to provide confidence intervals for parameter estimates. Finally, since a robust error model is necessary for accurate parameter estimates and confidence analysis, we include a comparison of absolute and relative models for measurement error.

High-order space-time finite element schemes for acoustic and viscodynamic wave equations with temporal decoupling

We revisit a method originally introduced by Werder et al. (in Comput. Methods Appl. Mech. Engrg., 190:6685-6708, 2001) for temporally discontinuous Galerkin FEMs applied to a parabolic partial differential equation. In that approach, block systems arise because of the coupling of the spatial systems through inner products of the temporal basis functions. If the spatial finite element space is of dimension D and polynomials of degree r are used in time, the block system has dimension (r + 1)D and is usually regarded as being too large when r > 1. Werder et al. found that the space-time coupling matrices are diagonalizable over [Formula: see text] for r ⩽100, and this means that the time-coupled computations within a time step can actually be decoupled. By using either continuous Galerkin or spectral element methods in space, we apply this DG-in-time methodology, for the first time, to second-order wave equations including elastodynamics with and without Kelvin-Voigt and Maxwell-Zener viscoelasticity. An example set of numerical results is given to demonstrate the favourable effect on error and computational work of the moderately high-order (up to degree 7) temporal and spatio-temporal approximations, and we also touch on an application of this method to an ambitious problem related to the diagnosis of coronary artery disease. Copyright © 2014 The Authors. International Journal for Numerical Methods in Engineering published by John Wiley & Sons Ltd.