1
|
Calheiros-Lobo MJ, Carbas R, da Silva LFM, Pinho T. Impact of in vitro findings on clinical protocols for the adhesion of CAD-CAM blocks: A systematic integrative review and meta-analysis. J Prosthet Dent 2024; 131:1051-1070. [PMID: 36543700 DOI: 10.1016/j.prosdent.2022.08.024] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/20/2022] [Revised: 08/25/2022] [Accepted: 08/26/2022] [Indexed: 12/23/2022]
Abstract
STATEMENT OF PROBLEM Computer-aided design and computer-aided manufacturing (CAD-CAM) blocks have evolved rapidly, making it difficult to establish the best clinical protocol for bonding a given block and whether an established protocol is appropriate for a newly introduced product. PURPOSE This integrative systematic review and meta-analysis aimed to clarify whether the clinician can select the most efficient adhesion protocols for CAD-CAM blocks by reading published in vitro studies and implementing them in daily practice. MATERIAL AND METHODS Based on the population, intervention, comparison, and outcome (PICO) strategy, 3 databases were searched for in vitro studies, randomized clinical trials, prospective or retrospective studies, and case reports from January 1, 2015, to July 31, 2021. A meta-analysis analyzed 28 studies to calculate the mean difference between best and worst protocols for each author and block with a random-effects model (α=.05). RESULTS From 508 relevant studies, 37 in vitro studies, 2 clinical studies, and 1 clinical report were selected for data extraction and qualitative analysis. Vita Enamic, IPS e.max CAD, LAVA Ultimate, and Vita Mark II blocks were the most studied, and RelyX Ultimate was the most used luting cement. The meta-analysis confirmed the null hypothesis that the evidence-based efficacy of clinical protocols to bond CAD-CAM blocks is still controversial (P<.05). CONCLUSIONS There are objective standards for individual in vitro tests, but the studies lack standardization. Some tested protocols were more efficient than others. Randomized clinical trials and well-documented clinical situations were almost nonexistent, making direct application of in vitro findings in clinical practice impossible.
Collapse
Affiliation(s)
- Maria João Calheiros-Lobo
- Clinical Professor, Department of Conservative Dentistry and Researcher, UNIPRO - Oral Pathology and Rehabilitation Research Unit, IUCS - CESPU, Gandra, Portugal.
| | - Ricardo Carbas
- Postdoctoral Researcher, INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering, University of Porto, Porto, Portugal
| | - Lucas F M da Silva
- Full Professor, Department of Mechanical Engineering, Faculty of Engineering, University of Porto, Porto, Portugal
| | - Teresa Pinho
- Full Professor and Researcher, UNIPRO - Oral Pathology and Rehabilitation Research Unit, IUCS - CESPU, Gandra, Portugal
| |
Collapse
|
2
|
Kanamori Y, Takahashi R, Nikaido T, Nitta H, Shimada Y, Tagami J, Kunzelmann KH. Influence of resin-coating techniques on the marginal adaptation and the bond strengths of CAD/CAM-fabricated hybrid ceramic inlays. Dent Mater J 2024; 43:407-414. [PMID: 38644215 DOI: 10.4012/dmj.2023-182] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/23/2024]
Abstract
This study aimed to evaluate the effects of different resin-coating technique strategies and dual-cure resin luting materials on proximal marginal adaptation and the microtensile bond strengths (μTBSs) of CAD/CAM hybrid ceramic inlays. Extracted human molars were classified into four groups, depending on the coating technique: No coating (None), single coating (1-coating), double coating (2-coating), and flowable resin-coating (Combination). The inlays were bonded with one of the three materials: Panavia V5 (V5), Rely X Ultimate (RXU), and Calibra Ceram (CC). The differences with regard to adaptation were not significant. In the case of μTBS data for V5, no significant differences were observed, whereas for RXU, μTBS values for Combination statistically exceeded those for None and 1-coating. For CC, μTBS values for Combination statistically exceeded those for None, 1-coating, and 2-coating. The coating techniques did not influence the adaptation but influenced the bond strength, and Combination performed the best.
Collapse
Affiliation(s)
- Yuna Kanamori
- Institute of Global Affairs, Tokyo Medical and Dental University (TMDU)
| | - Rena Takahashi
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, TMDU
| | - Toru Nikaido
- Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University
| | - Hiroshi Nitta
- Department of General Dentistry, Graduate School of Medical and Dental Sciences, TMDU
| | - Yasushi Shimada
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, TMDU
| | - Junji Tagami
- Department of Operative Dentistry, Faculty of Dentistry, Chulalongkorn University
| | - Karl-Heinz Kunzelmann
- Department of Conservative Dentistry and Periodontology, University Hospital, Ludwig-Maximilians-University Munich
| |
Collapse
|
3
|
Tahoun FAM, Kehela HAG, Nasr DM. Influence of different immediate dentin sealing strategies on bond strength of indirect resin nanoceramic restorations. Eur J Oral Sci 2024; 132:e12983. [PMID: 38497607 DOI: 10.1111/eos.12983] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/25/2023] [Accepted: 02/27/2024] [Indexed: 03/19/2024]
Abstract
In this study, we evaluated the effect of four different strategies for bonding a CAD/CAM resin nanoceramic restoration (Lava Ultimate, 3M) to the dentin surface using a universal adhesive (Scotch Bond Universal, 3M) and adhesive resin cement (RelyX Ultimate, 3M) on the shear bond strength (SBS) and failure mode. The strategies comprised: (i) immediate sealing, immediate bonding; (ii) immediate sealing, bonding after 2 weeks with provisional restoration; (iii) immediate sealing with flowable resin composite reinforcement and bonding after 2 weeks with provisional restoration; and (iv) no immediate sealing, and bonding after 2 weeks with provisional restoration. After bonding, all the specimens were thermocycled, shear tests were performed using a universal testing machine, and failure modes were determined using stereomicroscope and scanning electron microscopy. The highest mean SBS was recorded with immediate sealing, immediate bonding strategy. Most adhesive failures with exposed dentinal tubules were noted in specimens exposed to bonding after 2 weeks with no immediate sealing, which was associated with the lowest SBS. Mixed failures predominated in all immediate dentin sealing groups. Immediate sealing with universal adhesives improves SBS, particularly in the single-visit approach, which has shown significantly better performance, whereas the provisional phase has a negative effect.
Collapse
Affiliation(s)
- Fatma-Alzahraa Mohamed Tahoun
- Division of Operative, Conservative Dentistry Department, Faculty of Dentistry, Alexandria University, Alexandria, Egypt
| | - Hany Abdel-Ghafar Kehela
- Division of Operative, Conservative Dentistry Department, Faculty of Dentistry, Alexandria University, Alexandria, Egypt
| | - Dina Mohamed Nasr
- Division of Operative, Conservative Dentistry Department, Faculty of Dentistry, Alexandria University, Alexandria, Egypt
| |
Collapse
|
4
|
Antoniou I, Mourouzis P, Dionysopoulos D, Pandoleon P, Tolidis K. Influence of Immediate Dentin Sealing on Bond Strength of Resin-Based CAD/CAM Restoratives to Dentin: A Systematic Review of In Vitro Studies. Biomimetics (Basel) 2024; 9:267. [PMID: 38786477 PMCID: PMC11118030 DOI: 10.3390/biomimetics9050267] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/26/2024] [Revised: 04/22/2024] [Accepted: 04/26/2024] [Indexed: 05/25/2024] Open
Abstract
Immediate dentin sealing (IDS) is a method of improving the bond strength of indirect dental restorative materials to dentin and belongs to the biomimetic protocols of contemporary dentistry. The purpose of this systematic review was to evaluate the effect of IDS on the bond strength of resin-based CAD/CAM materials to dentin. PubMed and MEDLINE, Scopus, and the Web of Science were searched by two individual researchers, namely for studies that have been published in English between 1 January 2005 and 31 December 2023 in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The inclusion criteria encompassed articles related to in vitro studies, measuring the bond strength through microtensile bond strength (μ-TBS), micro-shear bond strength (μ-SBS), tensile bond strength (TBS) or shear bond strength (SBS) tests after the use of the IDS technique. The included restorative materials comprised resin-based CAD/CAM materials bonded to dentin. A total of 1821 studies were identified, of which 7 met the inclusion criteria. A meta-analysis was not deemed appropriate due to the high level of diversity inthe publications and techniques. The use of IDS yielded higher bond strength outcomesin various experimental conditions and resin-based CAD/CAM materials. Overall, IDS in CAD/CAM restorations may contribute to better clinical outcomesand improved restoration longevity due to this property.
Collapse
Affiliation(s)
- Iliana Antoniou
- Department of Operative Dentistry, Faculty of Dentistry, School of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece; (I.A.); (P.M.); (K.T.)
| | - Petros Mourouzis
- Department of Operative Dentistry, Faculty of Dentistry, School of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece; (I.A.); (P.M.); (K.T.)
| | - Dimitrios Dionysopoulos
- Department of Operative Dentistry, Faculty of Dentistry, School of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece; (I.A.); (P.M.); (K.T.)
| | - Panagiotis Pandoleon
- Department of Prosthodontics, Faculty of Dentistry, School of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece;
| | - Kosmas Tolidis
- Department of Operative Dentistry, Faculty of Dentistry, School of Health Sciences, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece; (I.A.); (P.M.); (K.T.)
| |
Collapse
|
5
|
Ozer F, Batu Eken Z, Hao J, Tuloglu N, Blatz MB. Effect of Immediate Dentin Sealing on the Bonding Performance of Indirect Restorations: A Systematic Review. Biomimetics (Basel) 2024; 9:182. [PMID: 38534867 DOI: 10.3390/biomimetics9030182] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/28/2024] [Revised: 03/04/2024] [Accepted: 03/15/2024] [Indexed: 03/28/2024] Open
Abstract
The popular immediate dentin sealing (IDS) technique is used to improve the bond strength of indirect restorations. This systematic review assessed whether bond strength is affected by the type of aging conditions, bonding agents, flowable resin composites, impression materials, temporary materials, and/or resin cement used within the IDS procedure. A comprehensive database search of PubMed, Embase, Scopus, Ovid Medline, Web of Sciences, Cochrane Library, Dentistry & Oral Sciences Source, and ProQuest was carried out up to 30 January 2024 without publication year or language limitations. Only in vitro full-texts regarding the effect of IDS on bond strength were included, and the quality of their methods was assessed via a Risk of Bias (RoB) test. In total, 1023 pertinent studies were initially found, and 60 articles were selected for review after screening for the title, abstract, and full texts. IDS application improves the bond strength of indirect restorations to dentin and reduces the negative effects of temporary materials on the bond durability of final indirect restorations. Filled dentin bonding agents or combinations with flowable resin composite are preferred to protect the IDS layer from conditioning procedures.
Collapse
Affiliation(s)
- Fusun Ozer
- School of Dental Medicine, Department of Preventive and Restorative Sciences, University of Pennsylvania, Philadelphia, PA 19104, USA
| | - Zeynep Batu Eken
- Faculty of Dentistry, Department of Restorative Dentistry, Yeditepe University, Istanbul 34728, Turkey
| | - Jessica Hao
- School of Dental Medicine, University of Pennsylvania, Philadelphia, PA 19104, USA
| | - Nuray Tuloglu
- Faculty of Dentistry, Department of Pediatric Dentistry, University of Eskisehir Osmangazi, Eskisehir 26040, Turkey
| | - Markus B Blatz
- School of Dental Medicine, Department of Preventive and Restorative Sciences, University of Pennsylvania, Philadelphia, PA 19104, USA
| |
Collapse
|
6
|
Magalhães T, Fidalgo-Pereira R, Torres O, Carvalho Ó, Silva FS, Henriques B, Özcan M, Souza JCM. Microscopic Inspection of the Adhesive Interface of Composite Onlays after Cementation on Low Loading: An In Vitro Study. J Funct Biomater 2023; 14:jfb14030148. [PMID: 36976072 PMCID: PMC10058625 DOI: 10.3390/jfb14030148] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2023] [Revised: 02/22/2023] [Accepted: 03/02/2023] [Indexed: 03/12/2023] Open
Abstract
Purpose: This study aimed to assess the layer thickness and microstructure of traditional resin-matrix cements and flowable resin-matrix composites at dentin and enamel to composite onlay interfaces after cementation on low loading magnitude. Materials and Methods: Twenty teeth were prepared and conditioned with an adhesive system for restoration with resin-matrix composite onlays manufactured by CAD-CAM. On cementation, tooth-to-onlay assemblies were distributed into four groups, including two traditional resin-matrix cements (groups M and B), one flowable resin-matrix composite (group G), and one thermally induced flowable composite (group V). After the cementation procedure, assemblies were cross-sectioned for inspection by optical microscopy at different magnification up to ×1000. Results: The layer thickness of resin-matrix cementation showed the highest mean values at around 405 µm for a traditional resin-matrix cement (group B). The thermally induced flowable resin-matrix composites showed the lowest layer thickness values. The resin-matrix layer thickness revealed statistical differences between traditional resin cement (groups M and B) and flowable resin-matrix composites (groups V and G) (p < 0.05). However, the groups of flowable resin-matrix composites did not reveal statistical differences (p < 0.05). The thickness of the adhesive system layer at around 7 µm and 12 µm was lower at the interfaces with flowable resin-matrix composites when compared to the adhesive layer at resin-matrix cements, which ranged from 12 µm up to 40 µm. Conclusions: The flowable resin-matrix composites showed adequate flowing even though the loading on cementation was performed at low magnitude. Nevertheless, significant variation in thickness of the cementation layer was noticed for flowable resin-matrix composites and traditional resin-matrix cements that can occur in chair-side procedures due to the clinical sensitivity and differences in rheological properties of the materials.
Collapse
Affiliation(s)
- Tiago Magalhães
- University Institute of Health Sciences (IUCS), CESPU, 4585-116 Gandra PRD, Portugal
| | - Rita Fidalgo-Pereira
- Center for Interdisciplinary Research in Health (CIIS), Faculty of Dental Medicine (FMD), Universidade Católica Portuguesa (UCP), 3504-505 Viseu, Portugal
| | - Orlanda Torres
- Oral Pathology and Rehabilitation Research Unit (UNIPRO), University Institute of Health Sciences (IUCS), CESPU, 4585-116 Gandra PRD, Portugal
| | - Óscar Carvalho
- Centre for MicroElectromechanical Systems (CMEMS-UMINHO), Campus Azurém, University of Minho, 4800-058 Guimarães, Portugal
- LABBELS Associate Laboratory, University of Minho, 4710-057 Braga, Portugal
| | - Filipe S. Silva
- Centre for MicroElectromechanical Systems (CMEMS-UMINHO), Campus Azurém, University of Minho, 4800-058 Guimarães, Portugal
- LABBELS Associate Laboratory, University of Minho, 4710-057 Braga, Portugal
| | - Bruno Henriques
- Centre for MicroElectromechanical Systems (CMEMS-UMINHO), Campus Azurém, University of Minho, 4800-058 Guimarães, Portugal
- LABBELS Associate Laboratory, University of Minho, 4710-057 Braga, Portugal
- Ceramic and Composite Materials Research Group (CERMAT), Department of Mechanical Engineering (EMC), Federal University of Santa Catarina (UFSC), Florianopolis 88040-900, Brazil
| | - Mutlu Özcan
- Division of Dental Biomaterials, Center of Dental Medicine, Clinic of Reconstructive Dentistry, University of Zurich, 8032 Zurich, Switzerland
| | - Júlio C. M. Souza
- University Institute of Health Sciences (IUCS), CESPU, 4585-116 Gandra PRD, Portugal
- Centre for MicroElectromechanical Systems (CMEMS-UMINHO), Campus Azurém, University of Minho, 4800-058 Guimarães, Portugal
- LABBELS Associate Laboratory, University of Minho, 4710-057 Braga, Portugal
- Correspondence:
| |
Collapse
|
7
|
Ding J, Jin Y, Feng S, Chen H, Hou Y, Zhu S. Effect of temporary cements and their removal methods on the bond strength of indirect restoration: a systematic review and meta-analysis. Clin Oral Investig 2023; 27:15-30. [PMID: 36422719 PMCID: PMC9877054 DOI: 10.1007/s00784-022-04790-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2022] [Accepted: 11/13/2022] [Indexed: 11/25/2022]
Abstract
OBJECTIVES For a conventional indirect restoration, temporary cementation inevitably contaminated collapsed dentin collagen. The purpose of this review was to evaluate the optimal strategy for minimizing its negative effects. MATERIAL AND METHODS Databases such as PubMed, Web of Science, EMBASE, and the Cochrane Library were searched for in vitro studies, involving the influence of immediate dentin sealing (IDS), different temporary cements, and their removal strategies on dentin bond strength. The meta-analysis used the inverse variance method with effect method of the standardized mean difference and statistical significance at p ≤ 0.05. The I2 value and the Q-test were used to assess the heterogeneity. RESULTS A total of 14 in vitro trials were subjected to the meta-analysis. Within the study's limitations, we assumed that IDS eliminated the negative effects of temporary bonding, achieving the comparable immediate bond strength with the control (p = 0.46). In contrast, under delayed dentin sealing (DDS), temporary cementation statistically decreased bond strength (p = 0.002). Compared with resin-based and non-eugenol zinc oxide cements, polycarboxylate and calcium hydroxide cements performed better on bond strength with no statistical difference from the control group (p > 0.05). Among the removal methods of temporary cements, the Al2O3 abrasion restored the decreased bond strength (p = 0.07) and performed better than hand instruments alone (p = 0.04), while pumice removal slightly reduced the bond strength in contrast with the control group (p = 0.05, 95% CI = - 1.62 to 0). CONCLUSIONS The choices of IDS, polycarboxylate and calcium hydroxide temporary cements, Al2O3 abrasion removal method were feasible and efficient to enhance the bond strength. CLINICAL RELEVANCE It is worthwhile applying IDS technique, polycarboxylate and calcium hydroxide temporary cements during indirect restoration. The Al2O3 abrasion of cleaning dentin can minimize the negative effects of temporary cement.
Collapse
Affiliation(s)
- Jingyu Ding
- Department of Prosthodontics, Hospital of Stomatology, Jilin University, 1500 Qinghua Road, Chaoyang District, Changchun, 130012 Jilin China
| | - Yifu Jin
- Department of Prosthodontics, Hospital of Stomatology, Jilin University, 1500 Qinghua Road, Chaoyang District, Changchun, 130012 Jilin China
| | - Shanshan Feng
- Department of Prosthodontics, Hospital of Stomatology, Jilin University, 1500 Qinghua Road, Chaoyang District, Changchun, 130012 Jilin China
| | - Huan Chen
- Department of Prosthodontics, Hospital of Stomatology, Jilin University, 1500 Qinghua Road, Chaoyang District, Changchun, 130012 Jilin China
| | - Yanyan Hou
- Department of Prosthodontics, Hospital of Stomatology, Jilin University, 1500 Qinghua Road, Chaoyang District, Changchun, 130012 Jilin China
| | - Song Zhu
- Department of Prosthodontics, Hospital of Stomatology, Jilin University, 1500 Qinghua Road, Chaoyang District, Changchun, 130012 Jilin China
| |
Collapse
|
8
|
Nakazawa M, Maeno M, Komoto M, Nara Y. Appropriate Immediate Dentin Sealing to Improve the Bonding of CAD/CAM Ceramic Crown Restorations. Polymers (Basel) 2022; 14:polym14214541. [PMID: 36365534 PMCID: PMC9658925 DOI: 10.3390/polym14214541] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2022] [Revised: 10/15/2022] [Accepted: 10/17/2022] [Indexed: 12/02/2022] Open
Abstract
This study aimed to use quantitative and qualitative evaluations based on micro-tensile bond strength (μTBS) to clarify the appropriate immediate dentin sealing (IDS) approach for improving the bonding of CAD/CAM ceramic crown restorations. Forty-eight extracted human molars were prepared to obtain standardized abutment specimens and divided into three groups: no IDS (group C: control), IDS performed by a single application of an all-in-one adhesive system (group A), and IDS performed by the combined application of an adhesive system and a flowable resin composite (group F). All specimens were restored with a ceramic crown fabricated by a chair-side CAD/CAM system and were divided into no-stress and stressed groups. After cyclic loading (78.5 N; total, 3 × 105 cycles; 90 cycles/min) on the specimens in the stressed group, all specimens were sectioned. The μTBS values for the occlusal and mesioaxial walls were measured (n = 16) and analyzed statistically. The quantitative bonding performance of groups A and F were superior to that of group C, regardless of the cyclic loading and abutment wall conditions. Group F showed the maximum bond strength and the highest bond durability in the qualitative bonding performance even under the cyclic loading condition simulating clinical mastication.
Collapse
|
9
|
Varadan P, Balaji L, Manaswini DY, Rajan RM. Reinforced Immediate Dentin Sealing vs Conventional Immediate Dentin Sealing on Adhesive Behavior of Indirect Restorations: A Systematic Review. J Contemp Dent Pract 2022; 23:1066-1075. [PMID: 37073921 DOI: 10.5005/jp-journals-10024-3415] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 04/20/2023]
Abstract
AIM The aim of this systematic review is to compare the bonding performance of indirect restoration with the reinforced immediate dentin sealing (IDS) method as opposed to the conventional IDS method. MATERIALS AND METHODS A literature search was conducted in PubMed, Cochrane, and EBSCOHost up to January 31st 2022, accompanied by a hand search in Google Scholar. Inclusion criteria involved studies comparing conventional IDS and reinforced IDS protocol and evaluating various parameters influencing the bonding performance, such as type of indirect restoration, etching protocol, cavity design, tooth surface preparation, method of oral cavity simulation, and processing after luting. The quality of six included studies was appraised using CRIS guidelines. RESULTS A total of 29 publications was identified, and 6 of them fulfilled the inclusion criteria. All of the included studies were in vitro studies. The predetermined data were independently extracted and evaluated by four reviewers. It was observed that most of the studies showed an improvement in bond strength with reinforced IDS when compared with conventional IDS. Also, etch-and-rinse and 2-step self-etch adhesive protocols have shown better bonding performance than universal adhesive systems. CONCLUSION Reinforced IDS has similar or better bond strength to that of conventional IDS strategies. The need for prospective studies is highlighted. The future clinical studies for immediate dentin sealing ought to be reported in a uniform and methodological way. CLINICAL SIGNIFICANCE Application of an additional layer of low-viscosity resin composite provides a thicker adhesive layer, prevents re-exposure of dentin during the final restoration, and allows a smoother preparation in lesser clinical chair time and eliminates any possible undercuts. Thus, reinforced IDS has shown to result in better preservation of the dentinal seal than IDS technique.
Collapse
Affiliation(s)
- Preethi Varadan
- Department of Conservative Dentistry and Endodontics, Sri Ramachandra Dental College and Hospital, Chennai, Tamil Nadu, India
| | - Lakshmi Balaji
- Department of Conservative Dentistry and Endodontics, Sri Ramachandra Dental College and Hospital, Chennai, Tamil Nadu, India, Phone: +91 9841049310, e-mail:
| | - D Yaso Manaswini
- Department of Conservative Dentistry and Endodontics, Sri Ramachandra Dental College and Hospital, Chennai, Tamil Nadu, India
| | - R Mathan Rajan
- Department of Conservative Dentistry and Endodontics, Sri Ramachandra Dental College and Hospital, Chennai, Tamil Nadu, India
| |
Collapse
|
10
|
Batista J, Leite MM, Sabag MF, Lopes LG, Torres ÉM. Influence of the Flowable Resin Layer on Bond Strength Between Resin Cement and a Universal Adhesive Applied in the Immediate Dentin-sealing Technique. Oper Dent 2022; 47:403-411. [PMID: 35917239 DOI: 10.2341/21-050-l] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 09/04/2021] [Indexed: 11/23/2022]
Abstract
OBJECTIVES The present study evaluated the influence of a flowable resin layer on bond strength between resin cement and a universal adhesive applied using an immediate dentin sealing (IDS) technique. METHODS AND MATERIALS Coronary portions of bovine teeth were randomly divided into six groups (n=15). In the IDS.U group, the exposed dentin was immediately sealed with the Single Bond Universal adhesive (3M ESPE) following the self-etching protocol. In the IDS.UF group, a layer of Filtek Z350 (3M ESPE) flow resin was applied over the universal adhesive. In the DDS (control) group, the dentin was kept "fresh" and delayed dentin sealing was performed. After 24 hours in distilled water at 37°C, dentin surfaces were treated with pumice, phosphoric acid, and the application of the universal adhesive in the IDS.U and IDS. UF groups. The DDS group was treated with pumice and the universal adhesive was applied. The samples received cylinders of resin cement Rely X Ultimate (3M ESPE) made with the aid of starch tubes of 0.96 mm in diameter and 2 mm in length. They were submitted to the microshear bond strength test (μSBS) at 0.5 mm/min, after 24 hours (T1) and 3 months (T2). The fracture areas were evaluated qualitatively using a DSM 300 microscope (KOZO) with 45× magnification and classified as: adhesive, cohesive in cement, cohesive in dentin, or mixed. Samples were analyzed by scanning electron microscopy (SEM). The data were compared statistically between groups using the Kruskal-Wallis test, and intra-groups using the Mann-Whitney test (α=0.05). RESULTS There were no significant differences between groups for the bond strength values (p>0.05). The IDS.UF group showed higher values at 3 months, when compared to the values of 24 hours (p<0.001). All groups showed a predominance of adhesive fracture (86.7% to 100%). SEM showed dentinal tubules exposed in the IDS.U and DDS groups; in the IDS.UF group, the tubules were completely sealed. CONCLUSIONS The flow resin can be used on the adhesive when using the IDS technique because it increased the bond strength values after 3 months and promoted effective sealing of the dentinal tubules.
Collapse
Affiliation(s)
- Jmn Batista
- *João Marcos Nascimento Batista, MSc, Piracicaba Dental School, State University of Campinas, Piracicaba, Brazil
| | - M M Leite
- Murillo Martins Leite, MSc, Postgraduate Program in Dentistry, Federal University of Goiás, Goiânia, Brazil
| | - M F Sabag
- Matheus Fabricante Sabag, DDS, Graduate Program in Dentistry, Federal University of Goiás,Goiânia, Brazil
| | - L G Lopes
- Lawrence Gonzaga Lopes, PhD, School of Dentistry, Federal University of Goiás, Goiânia, Brazil
| | - É M Torres
- Érica Miranda de Torres, PhD, School of Dentistry, Federal University of Goiás, Goiânia, Brazil
| |
Collapse
|
11
|
Immediate Dentin Sealing for Adhesive Cementation of Indirect Restorations: A Systematic Review and Meta-Analysis. Gels 2022; 8:gels8030175. [PMID: 35323288 PMCID: PMC8955250 DOI: 10.3390/gels8030175] [Citation(s) in RCA: 22] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/15/2022] [Revised: 02/28/2022] [Accepted: 03/09/2022] [Indexed: 12/19/2022] Open
Abstract
Immediate dentin sealing (IDS) involves applying an adhesive system to dentin directly after tooth preparation, before impression. This was considered an alternate to delayed dentin sealing (DDS), a technique in which hybridization is performed following the provisional phase and just before the indirect restoration luting procedure. This study aimed to compare the bond strength of restorations to dentin of the IDS and the DDS techniques throughout a systematic review and meta-analysis. The following PICOS framework was used: population, indirect restorations; intervention, IDS; control, DDS; outcomes, bond strength; and study design, in vitro studies. PubMed (MedLine), The Cochrane Library, ISI Web of Science, Scielo, Scopus, and Embase were screened up to January 2022 by two reviewers (L.H. and R.B.). In vitro papers studying the bond strength to human dentin of the IDS technique compared to the DDS technique were considered. Meta-analyses were carried out by using a software program (Review Manager v5.4.1; The Cochrane Collaboration). Comparisons were made by considering the adhesive used for bonding (two-step etch-and-rinse, three step etch-and-rinse, one-step self-etch, two-step self-etch, and universal adhesives). A total of 3717 papers were retrieved in all databases. After full-text assessment, 22 potentially eligible studies were examined for qualitative analysis, leaving a total of 21 articles for the meta-analysis. For the immediate bond strength, regardless of the adhesive strategy used, the IDS technique improved the bond strength of restorations to the dentin (p < 0.001). Taking into account the subgroup analysis, it seems that the use of the IDS technique with a two-step etch-and-rinse or a one-step self-etch adhesive system does not represent any advantage over the DDS technique (p = 0.07, p = 0.15). On the other hand, for the aged bond strength, regardless of the adhesive strategy used, the IDS technique improved the bond strength of restorations to the dentin (p = 0.001). The subgroups analysis shows that this improvement is observed only when a three-step etch-and-rinse adhesive system (p < 0.001) or when a combination of an adhesive system plus a layer of flowable resin (p = 0.01) is used. The in vitro evidence suggests that the use of the IDS technique improves the bond strength of dentin to resin-based restorations regardless of the adhesive strategy used. The use of a three-step etch-and-rinse adhesive system or the combination of an adhesive system plus a layer of flowable resin seems to considerably enhance the bond strength in the long term.
Collapse
|
12
|
Josic U, Sebold M, Lins RBE, Savovic J, Mazzitelli C, Maravic T, Mazzoni A, Breschi L. Does immediate dentin sealing influence postoperative sensitivity in teeth restored with indirect restorations? A systematic review and meta-analysis. J ESTHET RESTOR DENT 2021; 34:55-64. [PMID: 34859939 PMCID: PMC9300029 DOI: 10.1111/jerd.12841] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2021] [Revised: 10/21/2021] [Accepted: 11/09/2021] [Indexed: 12/22/2022]
Abstract
Objective This study comprehensively reviewed clinical trials that investigated the effect of immediate dentin sealing (IDS) technique on postoperative sensitivity (POS) and clinical performance of indirect restorations. Materials and methods The systematic review was conducted according to the preferred reporting items for systematic reviews and meta‐analyses statement, and was guided by the PICOS strategy. Clinical trials in which adult patients received at least one indirect restoration cemented with IDS approach and one restoration cemented following the delayed dentin sealing (DDS) were considered. Results Following title screening and full‐text reading, four studies met the inclusion criteria and were included for qualitative synthesis, while two studies were selected for quantitative synthesis. According to Risk of bias‐2 tool, two studies were classified as “some concerns” for the outcome POS. No statistically significant differences were found between teeth restored with indirect restorations using the IDS and DDS approach for POS (p > 0.05), neither at the baseline (very low certainty of evidence according to GRADE) nor after 2 years of follow‐up (low certainty of evidence according to GRADE). Conclusion There is low‐certainty evidence that IDS does not reduce POS in teeth restored with indirect restorations. Clinical significance There is no clinical evidence to favor IDS over DDS when restoring teeth with indirect restorations.
Collapse
Affiliation(s)
- Uros Josic
- Department of Biomedical and Neuromotor Sciences, University of Bologna, Bologna.,Clinic for Pediatric and Preventive Dentistry, School of Dental Dedicine, University of Belgrade, Belgrade, Serbia
| | - Maicon Sebold
- Department of Restorative Dentistry, Operative Dentistry Devision, Piracicaba Dental School, University of Campinas, Piracicaba, Brazil
| | - Rodrigo B E Lins
- Department of Restorative Dentistry, Operative Dentistry Devision, Piracicaba Dental School, University of Campinas, Piracicaba, Brazil.,Dentistry Course, State University of Paraiba, Araruna, Brazil
| | - Jelena Savovic
- Population Health Sciences, Bristol Medical School, University of Bristol, Bristol, UK
| | - Claudia Mazzitelli
- Department of Biomedical and Neuromotor Sciences, University of Bologna, Bologna
| | - Tatjana Maravic
- Department of Biomedical and Neuromotor Sciences, University of Bologna, Bologna
| | - Annalisa Mazzoni
- Department of Biomedical and Neuromotor Sciences, University of Bologna, Bologna
| | - Lorenzo Breschi
- Department of Biomedical and Neuromotor Sciences, University of Bologna, Bologna
| |
Collapse
|
13
|
Kusakabe S, Tsuruta H, Uno M, Burrow MF, Nikaido T. Clinical assessment of resin-coating technique applied to exposed dentin after crown preparation. Dent Mater J 2021; 41:226-229. [PMID: 34759125 DOI: 10.4012/dmj.2021-029] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
The resin-coating technique, in which exposed dentin surfaces are covered using a thin-film coating material, was approved in the Japanese public health insurance system in December 2019. The purpose of this study was to evaluate clinical cases treated using the resin-coating technique with Hybrid Coat II (HC II) after tooth preparation on vital teeth. A total of 134 cases from patients who visited nine dental clinics were examined from the clinical records. Clinical signs and symptoms of cases before, during, and after treatment and at the time of recall were evaluated. The resin-coating was applied as either a single application with HC II (86.6%) or a combined application of HC II and a flowable resin composite (13.4%). The success rate without any symptoms of sensivity to cold water was 92.5% (124 cases). The current results indicated that the resin-coating with HC II is a reliable treatment for the tooth preparation of vital teeth.
Collapse
Affiliation(s)
- Shusuke Kusakabe
- Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University
| | - Hanemi Tsuruta
- Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University
| | - Mitsunori Uno
- Department of Prosthodontics, Division of Oral Functional Sciences and Rehabilitation, School of Dentistry, Asahi University
| | - Michael F Burrow
- Restorative Dental Sciences, Faculty of Dentistry, University of Hong Kong
| | - Toru Nikaido
- Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University
| |
Collapse
|
14
|
Oda Y, Takahashi R, Nikaido T, Tagami J. Influence of the resin-coating technique on the bonding performance of self-adhesive resin cements in single-visit computer-aided design/computer-aided manufacturing resin restorations. J ESTHET RESTOR DENT 2021; 34:721-728. [PMID: 34542233 DOI: 10.1111/jerd.12818] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/08/2021] [Revised: 08/29/2021] [Accepted: 09/07/2021] [Indexed: 11/27/2022]
Abstract
OBJECTIVE This in vitro study investigated the influence of resin coating on the bonding performance of self-adhesive resin cements in single-visit computer-aided design (CAD)/computer-aided manufacturing (CAM) resin restorations. MATERIALS AND METHOD CAD/CAM resin (1.5-mm thick) was mounted on 20 noncoated and 20 resin-coated human dentin surfaces using dual-cured self-adhesive resin cements (Panavia SA Cement Plus or Panavia SA Cement Universal, Kuraray Noritake Dental) in either self-curing or dual-curing mode. These specimens were sectioned into beam-shaped sticks and subjected to microtensile bond strength tests after 24 h of water storage. The obtained data were statistically analyzed with three-way analysis of variance (ANOVA) and t tests (α = 0.05). RESULTS The three-way ANOVA results revealed the significant influence of resin coating, resin cement, and curing mode. Resin coating and light curing led to higher bond strengths in almost all groups. Resin-coated dentin with Panavia SA Cement Plus exhibited a mean bond strength greater than 35 MPa in both self-curing and dual-curing modes. CONCLUSIONS In single-visit CAD/CAM resin restorations, resin coating, resin cement selection, and curing mode influenced the bonding performance of self-adhesive resin cements. In addition, resin coating and light curing increased the bond strength of self-adhesive resin cements. Resin coating and light curing are encouraged for predictable bonding performance of dual-cured self-adhesive resin cements in single-visit CAD/CAM resin restorations.
Collapse
Affiliation(s)
- Yutaro Oda
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), Tokyo, Japan
| | - Rena Takahashi
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), Tokyo, Japan
| | - Toru Nikaido
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), Tokyo, Japan.,Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University, Gifu, Japan
| | - Junji Tagami
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU), Tokyo, Japan
| |
Collapse
|
15
|
Samartzi TK, Papalexopoulos D, Sarafianou A, Kourtis S. Immediate Dentin Sealing: A Literature Review. Clin Cosmet Investig Dent 2021; 13:233-256. [PMID: 34188553 PMCID: PMC8232880 DOI: 10.2147/ccide.s307939] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/22/2021] [Accepted: 05/20/2021] [Indexed: 02/04/2023] Open
Abstract
Purpose The immediate application of a dentin-bonding agent after tooth preparation and before impression-taking (immediate dentin sealing [IDS]) has been suggested to provide several advantages concerning bacterial microleakage, hypersensitivity, and bonding quality. We reviewed the literature and clarified certain aspects related to each step of IDS application. Materials and Methods The search strategy comprised an electronic research in MEDLINE, Cochrane, Ovid and Scopus for studies published from January 1990 to December 2020 regarding the IDS technique and including both in vitro and clinical studies. Results After exclusion of irrelevant or duplicate articles, 88 articles focusing on aspects of the IDS technique were assessed. IDS seems to be advantageous with regard to bond strength, gap formation, bacterial microleakage, and dentin hypersensitivity. However, issues arising from interaction with impression materials, the provisional phase, and conditioning methods before cementation require further investigation. Conclusion There are no documented reasons preventing clinicians applying IDS in their everyday practice. On the contrary, the presented technique seems to be beneficial in certain aspects regarding indirect restorations.
Collapse
Affiliation(s)
| | | | - Aspasia Sarafianou
- Department of Prosthodontics, National and Kapodistrian University of Athens, Athens, Greece
| | - Stefanos Kourtis
- Department of Prosthodontics, National and Kapodistrian University of Athens, Athens, Greece
| |
Collapse
|
16
|
Uchiyama S, Takahashi R, Sato T, Rozan S, Ikeda M, Inokoshi M, Nikaido T, Tagami J. Effect of a temporary sealing material on the bond strength of CAD/CAM inlay restorations with resin-coating technique. Dent Mater J 2021; 40:1122-1128. [PMID: 33980749 DOI: 10.4012/dmj.2020-355] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
This study aimed to assess the effects of a temporary sealing material and cleaning method of resin-coated dentin on the bond strength of computer-aided design/computer-aided manufacturing (CAD/CAM) inlay restorations. Resin-coated dentin surfaces were unsealed or temporarily sealed for 1 h or 1 week. For the temporarily sealed group, a hydraulic temporary sealing material was removed and further divided into four groups: without cleaning, cleaned with a rotational brush, a universal cleaner or an air-polishing device. Some specimens were investigated with energy dispersive X-ray spectroscopy and the others were used for microtensile bond strength (MTBS) test. A sealing material could not be removed with a rotational brush, which resulted in pretest failures in all specimens after 1 h and which resulted in low MTBS after 1 week. An air-polishing device can clean resin-coated dentin temporarily sealed with a hydraulic temporary sealing material and resulted in the similar MTBS as in the unsealed group.
Collapse
Affiliation(s)
- Saki Uchiyama
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| | - Rena Takahashi
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| | - Takaaki Sato
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| | - Shin Rozan
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| | - Masaomi Ikeda
- Oral Prosthetic Engineering, Graduate School, Faculty of Dentistry, Tokyo Medical and Dental University (TMDU)
| | - Masanao Inokoshi
- Department of Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| | - Toru Nikaido
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU).,Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University
| | - Junji Tagami
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| |
Collapse
|
17
|
Yu J, Yi L, Guo R, Guo J, Yang H, Huang C. The Stability of Dentin Surface Biobarrier Consisting of Mesoporous Delivery System on Dentinal Tubule Occlusion and Streptococcus Mutans Biofilm Inhibition. Int J Nanomedicine 2021; 16:3041-3057. [PMID: 33948084 PMCID: PMC8088303 DOI: 10.2147/ijn.s290254] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2020] [Accepted: 03/31/2021] [Indexed: 01/21/2023] Open
Abstract
Background The dentin exposure always leads to dentin hypersensitivity and/or caries. Given the dentin’s tubular structure and low mineralization degree, reestablishing an effective biobarrier to stably protect dentin remains significantly challenging. This study reports a versatile dentin surface biobarrier consisting of a mesoporous silica-based epigallocatechin-3-gallate (EGCG)/nanohydroxyapatite delivery system and evaluates its stability on the dentinal tubule occlusion and the Streptococcus mutans (S. mutans) biofilm inhibition. Materials and Methods The mesoporous delivery system was fabricated and characterized. Sensitive dentin discs were prepared and randomly allocated to three groups: 1, control group; 2, casein phosphopeptide–amorphous calcium phosphate (CPP–ACP) group; and 3, the mesoporous delivery system group. The dentin permeability, dentinal tubule occlusion, acid and abrasion resistance, and S. mutans biofilm inhibition were determined for 1 week and 1 month. The in vitro release profiles of EGCG, Ca, and P were also monitored. Results The mesoporous delivery system held the ability to sustainably release EGCG, Ca, and P and could persistently occlude dentinal tubules with acid and abrasion resistance, reduce the dentin permeability, and inhibit the S. mutans biofilm formation for up to 1 month compared with the two other groups. The system provided prolonged stability to combat oral adverse challenges and served as an effective surface biobarrier to protect the exposed dentin. Conclusion The establishment of the dentin surface biobarrier consisting of a mesoporous delivery system indicates a promising strategy for the prevention and the management of dentin hypersensitivity and caries after enamel loss.
Collapse
Affiliation(s)
- Jian Yu
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory for Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, People's Republic of China
| | - Luyao Yi
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory for Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, People's Republic of China
| | - Rui Guo
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory for Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, People's Republic of China
| | - Jingmei Guo
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory for Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, People's Republic of China
| | - Hongye Yang
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory for Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, People's Republic of China
| | - Cui Huang
- The State Key Laboratory Breeding Base of Basic Science of Stomatology (Hubei-MOST) & Key Laboratory for Oral Biomedicine Ministry of Education, School and Hospital of Stomatology, Wuhan University, Wuhan, People's Republic of China
| |
Collapse
|
18
|
Tokita C, Maeno M, Nara Y. The effect of space setting values and restorative block materials on the bonding of metal-free CAD/CAM onlay restorations. Dent Mater J 2021; 40:994-1006. [PMID: 33827999 DOI: 10.4012/dmj.2020-293] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
The effects of space setting values and restorative materials on the bonding of metal-free CAD/CAM onlay restoration were examined quantitatively and qualitatively. Seventy-two standardized MODB onlay cavities, prepared using human molars were restored under nine conditions, based on three space setting values, Increased (IC), Standard (SC, control), Decreased (DC), and three restorative block materials, resin-composites (RC), lithium disilicate glass-ceramics (LD), Feldspar ceramics (FC, control). All the restored specimens were subjected to cyclic loading and thereafter the microtensile bond strength (µ-TBS) was measured and analyzed statistically. The effect of space setting value on the µ-TBS varied with the restorative material. The bonding reliability of RC and the bonding durability of LD were significantly superior to FC. The bonding characteristics of RC under IC and DC were similar to those under SC. LD under DC and FC under IC were effective in obtaining an excellent bonding reliability relative to their SC.
Collapse
Affiliation(s)
- Chie Tokita
- Department of Adhesive Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University
| | - Masahiko Maeno
- Department of Adhesive Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University
| | - Yoichiro Nara
- Department of Adhesive Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University
| |
Collapse
|
19
|
Effect of Two Antibacterial Luting Protocols with and without Immediate-Dentin-Bonding on Microtensile Bond Strength of Glass Ceramic to Bur-Cut Cavity Floor Dentin. BALKAN JOURNAL OF DENTAL MEDICINE 2021. [DOI: 10.2478/bjdm-2020-0033] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
Abstract
Summary
Background/Aim: The aim of this study was to evaluate the bond strength of glass ceramic inlay system using 2 antibacterial adhesive luting protocols with 2 cementation techniques to bur-cut dentin.
Material and Methods: Class I inlay cavities with 6-degree occlusal divergence and size of 6-, 3- and 2-mm in length, width and depth, were prepared on extracted human molars, randomly assigned to 2 main groups; each to 1 cementation technique, with or without immediate-dentin-bonding (IDB or NIDB) further divided into 3 subgroups; 2 to 2 antibacterial luting protocols, traditional (T) and experimental (E); and 1 to a control (C) group. In group IDBT, IDB-E and IDB-C dentin bonding was applied immediately after cavity preparation. In group NIDB-T, NIDB-E and NIDB-C dentin bonding was applied just before cementation of the restorations. The cavities in IDB-T and NIDB-T were treated with 2% chlorhexidine-digluconate (CHX) prior to dentin bonding application. The cavities in IDB-E and NIDB-E were treated only with dentin bonding system containing MDPB (12-methacryloyloxydodecylpyridinium bromide) active monomer featuring antibacterial effect. IDB-C and NIDB-C served as control. Dual-cure adhesive resin cement was used for the cementation of lithium disilicate-based ceramic inlay restorations. Fourteen test specimens per group were prepared for microtensile testing and consecutively subjected to tensile load at a crosshead speed of 1 mm/min. The mode of failure was observed under SEM and evaluated for each group. The Kruskal-Wallis test was used to investigate the statistical difference between groups (α=0.05).
Results: The microtensile load was 5.96 MPa (median: 5.99 MPa) for IDB-T, 7.23 MPa (median: 7.55 MPa) for IDB-E, 6.68 MPa (median: 6.56 MPa) for IDB-C, 7.24 MPa (median: 7.20 MPa) for NIDB-T, 6.98 MPa (median: 6.30 MPa) for NIDB-E, and 7.02 MPa (median: 6.99 MPa) for NIDB-C, with no statistical difference between the groups (p>0.05). SEM monitoring for mode of failure revealed either cohesive (within resin cement) or adhesive-cohesive (mostly within resin cement along with partially involved areas between resin cement and ceramic restoration) character.
Conclusions: Within the limitations of the current study, none of the tested antibacterial luting protocols with either cementation technique was found to be superior in terms of bond strength.
Collapse
|
20
|
Koshida S, Maeno M, Nara Y. Effect of differences in the type of restoration and adhesive resin cement system on the bonding of CAD/CAM ceramic restorations. Dent Mater J 2020; 39:1022-1032. [PMID: 32727963 DOI: 10.4012/dmj.2019-308] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
The effect of differences in the type of restoration and adhesive resin cement system on the bonding of CAD/CAM ceramic restoration after cyclic loading was examined quantitatively and qualitatively. Seventy-two human maxillary first molars were divided into three restoration groups: MOD-inlay, MODP-onlay, and crown. Immediate dentin sealing was applied to the exposed dentin of all prepared specimens. The 24 specimens of each restoration group were further divided into another three groups, and a different adhesive resin cement system was applied to each group for cementation. All restoratives were fabricated from feldspathic-ceramic-blocks and cemented with each adhesive resin cement system according to the manufacturer's instructions. The microtensile bond-strength was measured after cyclic loading and was not significantly affected by differences in the type of restoration or adhesive resin cement system. However, the type of restorations and adhesive resin cement systems did show significant differences in terms of the bonding reliability.
Collapse
Affiliation(s)
- Seisuke Koshida
- Department of Adhesive Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University
| | - Masahiko Maeno
- Department of Adhesive Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University
| | - Yoichiro Nara
- Department of Adhesive Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University
| |
Collapse
|
21
|
Rozan S, Takahashi R, Nikaido T, Tichy A, Tagami J. CAD/CAM-fabricated inlay restorations: Can the resin-coating technique improve bond strength and internal adaptation? Dent Mater J 2020; 39:941-949. [PMID: 32595190 DOI: 10.4012/dmj.2019-309] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
This study assessed the effect of the resin-coating technique on the bond strength and internal adaptation of computer-aided design/computer-aided manufacturing (CAD/CAM)-fabricated inlays. Seventy-two mesio-occlusal-distal (MOD) cavities were prepared and distributed into 3 groups according to the resin-coating technique utilized: uncoated group, G-Premio Bond (1-step) group, and Clearfil SE Bond 2+Clearfil Majesty ES Flow (2-step+Flow) group. The MOD inlays were fabricated and cemented with RelyX Ultimate (RXU), G-CEM LinkForce (LinkForce), or Panavia V5 (PV5). After 5,000 thermal cycles, each specimen was sectioned and subjected to microtensile bond strength (MTBS) testing and an internal adaptation evaluation. For the uncoated group, RXU exhibited higher MTBS than LinkForce and PV5 (p<0.05). The MTBS of all 1-step and 2-step+Flow groups was greater than 30 MPa. Resin coating did not influence the MTBS of RXU, whereas resin coating increased the MTBS of LinkForce and PV5. More than 95% gap-free margins were found in all groups.
Collapse
Affiliation(s)
- Shin Rozan
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| | - Rena Takahashi
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| | - Toru Nikaido
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU).,Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University
| | - Antonin Tichy
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU).,Institute of Dental Medicine, First Faculty of Medicine of the Charles University and General University Hospital in Prague
| | - Junji Tagami
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| |
Collapse
|
22
|
Hayashi K, Maeno M, Nara Y. Influence of immediate dentin sealing and temporary restoration on the bonding of CAD/CAM ceramic crown restoration. Dent Mater J 2019; 38:970-980. [PMID: 31434832 DOI: 10.4012/dmj.2018-313] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
This study examined the influences of clinical application of immediate dentin sealing (IDS) and temporary restoration (TR) on prepared abutment surfaces on the bonding of computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic crown restorations after cyclic loading. Standardized abutments were prepared in 60 human mandibular premolars. Dentin surfaces of half of the specimens were sealed with adhesive and flowable composite, while those of the other half were not sealed. A half of both sealed and non-sealed specimens were restored using a temporary cement and temporary crown. Each individual CAD/CAM ceramic crown was fabricated and cemented to an individual abutment. The restored specimens were subjected to cyclic loading, and the micro tensile bond strengths (μ-TBS) were measured. IDS contributed to an increase in the bond strength, whereas TR did not affect the bond strength. IDS restoration without TR yielded the maximum bond reliability in achieve specific μ-TBS values for the restoration and ensuring durability against debonding.
Collapse
Affiliation(s)
- Kotaro Hayashi
- Department of Adhesive Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University
| | - Masahiko Maeno
- Department of Adhesive Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University
| | - Yoichiro Nara
- Department of Adhesive Dentistry, School of Life Dentistry at Tokyo, The Nippon Dental University
| |
Collapse
|
23
|
Akehashi S, Takahashi R, Nikaido T, Burrow MF, Tagami J. Enhancement of dentin bond strength of resin cement using new resin coating materials. Dent Mater J 2019; 38:955-962. [PMID: 31406095 DOI: 10.4012/dmj.2018-328] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
The purpose of this study was to investigate combinations of resin coating materials with a dual-cure resin cement for indirect restorations by evaluating microtensile bond strengths (μTBS). Dentin surfaces of human molars were bonded with either a direct or an indirect resin composite with/without the resin coating technique. For the resin coating material, Clearfil SE Bond 2 and either one of Clearfil Protect Liner F, Clearfil Majesty LV, Panavia V5 or an experimental light-cure coating material were used. For the dual-cure resin cement, either Panavia V5 or Panavia F2.0 were used with Panavia V5 Tooth Primer or ED Primer II. Resin coating does not always contribute to the enhancement of μTBS. The highest μTBS was obtained with the resin coating combination of Clearfil SE Bond 2 and Panavia V5, and cementation with Panavia F2.0, which was identical to that of the direct resin composite bonded with Clearfil SE Bond 2.
Collapse
Affiliation(s)
- Sae Akehashi
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| | - Rena Takahashi
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| | - Toru Nikaido
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU).,Department of Operative Dentistry, Division of Oral Functional Science and Rehabilitation, School of Dentistry, Asahi University
| | | | - Junji Tagami
- Department of Cariology and Operative Dentistry, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University (TMDU)
| |
Collapse
|