Effect of Surface Modification on the Photocatalysis of Ti-Ni Alloy in Orthodontics

Effectiveness of medical coating materials in decreasing friction between orthodontic brackets and archwires

Objective

The aim of this in vitro study was to evaluate the changes in friction between orthodontic brackets and archwires coated with aluminum oxide (Al₂O₃), titanium nitride (TiN), or chromium nitride (CrN). In addition, the resistance of the coatings to intraoral conditions was evaluated.

Methods

Stainless steel canine brackets, 0.016-inch round nickel–titanium archwires, and 0.019 × 0.025-inch stainless steel archwires were coated with Al₂O₃, TiN, and CrN using radio frequency magnetron sputtering. The coated materials were examined using scanning electron microscopy, an X-ray diffractometer, atomic force microscopy, and surface profilometry. In addition, the samples were subjected to thermal cycling and in vitro brushing tests, and the effects of the simulated intraoral conditions on the coating structure were evaluated.

Results

Coating of the metal bracket as well as nickel–titanium archwire with Al₂O₃ reduced the coefficients of friction (CoFs) for the bracket–archwire combination (p < 0.01). When the bracket and stainless steel archwire were coated with Al₂O₃ and TiN, the CoFs were significantly lower (0.207 and 0.372, respectively) than that recorded when this bracket–archwire combination was left uncoated (0.552; p < 0.01). The friction, thermal, and brushing tests did not deteriorate the overall quality of the Al₂O₃ coatings; however, some small areas of peeling were evident for the TiN coatings, whereas comparatively larger areas of peeling were observed for the CrN coatings.

Conclusions

Our findings suggest that the CoFs for metal bracket–archwire combinations used in orthodontic treatment can be decreased by coating with Al₂O₃ and TiN thin films.

Photochemical route for synthesizing Co-P alloy decorated ZnIn2S4 with enhanced photocatalytic H2 production activity under visible light irradiation

A series of amorphous Co-P alloy modified ZnIn2S4 composite samples were synthesized through a one-step photochemical method. The as-prepared samples were systematically characterized and the photocatalytic activity for H2 production under visible-light irradiation was investigated. It was found that the Co-P/ZnIn2S4 composite samples exhibited higher photocatalytic activity, which is 44 times higher than that of pure ZnIn2S4 and higher than that of the 1 wt% Pt/ZnIn2S4 sample. After modifying with amorphous Co-P alloy, the composite samples showed enhanced photocurrent, reduced photoelectric impedance, weakened fluorescence intensity and extended fluorescence lifetime, which accelerate the separation and transfer of photoinduced charge effectively, thus improving the catalytic activity of the composite sample. This work could provide a new strategy for the design and synthesis of low-cost, high-efficiency composite materials for photocatalytic hydrogen evolution and is promising for energy conversion and utilization.

Long-term antimicrobial assessment of orthodontic brackets coated with nitrogen-doped titanium dioxide against Streptococcus mutans

Background

The antimicrobial properties of orthodontic wire and brackets with nitrogen-doped titanium dioxide (N-doped TiO2) coating have been studied in the past. However, the evaluation period had been short and limited to 30 days. The aim of the present study was to extend the evaluation period (up to 90 days) of assessing the long-term antimicrobial effects of stainless steel orthodontic brackets coated with nitrogen-doped titanium dioxide (N-doped TiO2).

Methods

A total of 40 stainless steel pre-adjusted premolar brackets were equally divided into two groups; namely the control group (n=20, uncoated brackets) and the experimental group (n=20, coated brackets). RF magnetron sputtering was used to apply a thin film of TiO2 on the bracket surface. The crystalline structure of the thin film was assessed using X-ray diffraction. The antimicrobial property of the brackets against Streptococcus mutans (S. mutans) was evaluated using the survival rate by colony-forming units (CFU) at four intervals: 24 hours (T0), 30 days (T1), 60 days (T2), and 90 days (T3). 2-way ANOVA Repeated Measures was used to compare the effects between the groups over the time.

Results

There was no significant interaction between group and time (p = 0.568). The orthodontic brackets coated with the N-doped TiO2 thin film showed a significant CFU reduction (37.71 ± 5.21, 37.81 ± 5.03, 37.98 ± 5.37, and 37.74 ± 5.21 at T0, T1, T2, and T3, respectively) compared to the uncoated brackets (400.91 ± 14.67, 401.58 ± 14.01, 400.31 ± 14.68, and 402.04 ± 13.98 at T0, T1, T2, and T3, respectively) through visible light (p < 0.001).

Conclusion

N-doped TiO2 coated orthodontic brackets showed strong antimicrobial property against S. mutans over a period of 90 days, which is effective in preventing enamel decalcification during orthodontic therapy.

Anti-inflammatory properties of bioactive titanium metals

Anti-inflammatory properties of bioactive titanium metals prepared by anodic oxidation (AO-Ti) and alkali-heat (AH-Ti) treatments were studied by bacterial adhesion test and myeloperoxidase (MPO) activity assay methods. The bioactivities of the metals were also evaluated by apatite formation ability and osteoblasts culture experiments. Both metals could induce apatite formation and support osteoblasts proliferation. At the condition with normal incandescent light shine, both bioactive titanium metals had antibacterial adhesion properties compared with the titanium metal without treatment. The MPO activity assay proved that they both showed anti-inflammatory properties in vivo. The bioactive AO-Ti had better anti-inflammatory properties than the AH-Ti. It indicated that it is possible to optimize the anti-inflammatory properties of the bioactive titanium metals by different preparation methods.

Photocatalytic Antibacterial Effect of TiO2 Film of TiAg on Streptococcus mutans

Objective: To test through various oxidation procedures the differences in antibacterial activities against Streptococcus mutans (S mutans) of Titanium (Ti) and Titanium silver (TiAg) metals coated with TiO2.

Materials and Methods: This study examined the photocatalytic antibacterial effects on S mutans of Ti and TiAg ubstrates coated with two crystalline forms of TiO2 by thermal and anodic oxidation. A bacterial suspension of S mutans was pipetted onto TiO2-coated metal specimens and uncoated specimens with ultraviolet A (UVA) illumination for 20 to 100 minutes. The same specimen without UVA was used as the control. The level of colony-forming units of S mutans after UVA illumination was compared with that of the control.

Results: The level of colony-forming units of S mutans was significantly lower on TiO2-coated Ti and TiAg metal specimens after UVA illumination than on uncoated Ti and TiAg specimens. The level of colony-forming units of S mutans was significantly lower on the metals coated by anodic oxidation than on those coated by thermal oxidation. The TiO2 coating on TiAg had a significantly higher and more rapid antibacterial effect than did the TiO2 coating on Ti.

Conclusions: The antibacterial effect of a TiO2 film formed by anodic oxidation was superior to that formed by thermal oxidation. The addition of Ag to the Ti specimen indicated a synergistic effect on the photocatalytic antibacterial property against S mutans.

Surface mediated in situ differentiation of mesenchymal stem cells on gene-functionalized titanium films fabricated by layer-by-layer technique

In this work, multilayered and gene-functionalized titanium films composed of chitosan (Chi) and plasmid DNA (pEGFP-hBMP2, pGB) were employed to investigate the surface mediated in situ differentiation of mesenchymal stem cells (MSCs). The Chi/pGB multilayered structures were fabricated by layer-by-layer (LbL) assembly technique and degraded to release plasmid DNA complexes depending on bilayer numbers over 7 days. Therefore, the differentiation behaviors of MSCs cultured onto Chi/pGB multilayered titanium films surface were investigated. Chi/pGB LbL-modified titanium films show significant higher (p<0.01) transfection efficiency than those of other groups transfected by lipofectamine 2000 regarding the expression of green fluorescent protein (GFP). Reverse transcription-polymerase chain reaction (RT-PCR) assay revealed that MSCs adhered onto Chi/pGB LbL-modified titanium films could still express hBMP2 mRNA over 7 days culture. Compared with control groups, MSCs cultured onto Chi/pGB LbL-modified titanium films display significantly higher (p<0.01 or p<0.05) production levels of alkaline phosphatase (ALP) and osteocalcin over 7 days and 14 days culture, respectively. These results demonstrate that Chi/pGB LbL-modified titanium films are beneficial for sustained in situ inducing osteoprogenitor cells to differentiate into mature osteoblasts over long time. The approach presented here has potential applications in the development of gene-stimulating biomaterials and implant technology.