Complications reported with the use of orthodontic miniscrews: A systematic review

Maintaining Hygiene in Orthodontic Miniscrews: Patient Management and Protocols-A Literature Review

BACKGROUND

Oral hygiene is crucial for the success of orthodontic therapy involving temporary anchoring devices like miniscrews. Plaque buildup, exacerbated by orthodontic appliances, causes inflammation that can undermine treatment outcomes. Individualized prevention plans based on patient risk factors are essential. This review emphasizes the importance of oral hygiene in orthodontic therapy with miniscrews, identifies optimal devices for ensuring long-term stability, and explores protocols for high-risk patients.

MATERIALS AND METHODS

A comprehensive search was conducted on two primary databases, PubMed and Google Scholar, for relevant articles on oral hygiene and inflammation. Fourteen articles meeting the inclusion criteria were selected, covering topics such as "orthodontic miniscrew", "miniscrew and laser", "miniscrew and mouthwash", "electric toothbrush", and "GBT".

RESULTS

Inflammation can compromise miniscrew stability by damaging surrounding bone. Miniscrews of 10 mm length have lower failure rates due to better bone contact and stability. Chlorhexidine reduces inflammation risk and inhibits epithelialization around the implant head. Laser therapy enhances miniscrew stability and reduces inflammation. Chitosan effectively suppresses inflammatory mediators and prevents microorganism adhesion. Both sonic and roto-oscillating electric toothbrushes remove plaque effectively, with roto-oscillating brushes showing superior results. The Guided Biofilm Therapy (GBT) protocol offers professional hygiene benefits similar to traditional methods, with improved patient engagement and motivation.

CONCLUSIONS

Home oral hygiene maintenance is paramount for preventing inflammatory complications. Professional interventions such as diode laser usage, particularly in adult patients with a history of periodontitis or underlying systemic conditions, can mitigate orthodontic therapy failure risks. The GBT protocol fosters a more comfortable and participatory professional hygiene experience for patients, promoting better oral health awareness and compliance.

Usage of temporary anchorage devices: A cross-cultural and cross-sectional survey of orthodontists in Australia and the UK

INTRODUCTION

Detailed insight regarding the use of temporary anchorage devices (TAD) in Australia and the United Kingdom (UK) is lacking. The primary aim of the present cross-sectional survey was to investigate TAD usage among UK-based and Australian-based orthodontists. The secondary objectives were to compare TAD-related preferences and protocols between orthodontists in the two countries.

METHODS

A pilot-tested electronic questionnaire was distributed to members of the British Orthodontic Society and the Australian Society of Orthodontists. Questions pertained to their demographic details, and current use of TADs including protocols, treatment objectives and factors influencing their use.

RESULTS

A total of 192 responses were recorded (Australia: 122; UK: 70). One hundred and forty-two respondents (74.0%) reported using TADs as part of their orthodontic treatment, 77.0% in Australia (n=94) and 68.6% in the UK (n=48). Molar protraction was the most common procedure for which TADs were reportedly used (Australia: n=118; 87.2%, UK: n=36; 75.0%). "Loosening" was the most prevalent reported complication overall (n=124; 90.1%). "Confidence", "insufficient postgraduate education" and "availability of equipment" were the factors that most influenced the decision not to provide TADs.

CONCLUSIONS

Most orthodontists in both countries provided TADs. TAD protocols of orthodontists in both countries were reported. Similarities and differences regarding TAD-related clinical practices and procedures, complications and factors influencing the use of TADs and reasons for not using TADs were explored. Information from the present study can provide baseline data for future related studies in each country and for comparison of TAD usage in other countries.

Comprehensive orthodontic treatment using miniscrews and digital rehabilitation in a patient with severe recessive dystrophic epidermolysis bullosa

INTRODUCTION

Epidermolysis bullosa (EB) is a rare genetic disorder characterized by skin fragility and blister formation. The phenotypic presentation is broad with four major types, being Recessive Dystrophic EB (RDEB) the most severe, including oral anomalies such as severe microstomia, ankyloglossia, vestibule obliteration and occlusal anomalies, turning orthodontic treatment into a challenge.

AIM

This case report aims to present the comprehensive treatment of a patient with severe RDEB, including periodontal surgery, orthodontic fixed braces with mini-screws and oral rehabilitation with anterior veneers.

CASE REPORT

A 27-year-old female patient with severe RDEB received orthodontic treatment in the upper jaw to improve malalignment and anterior crossbite. After 13 months of treatment with fixed appliances, miniscrews were placed in the anterior segment to intrude and procline the upper incisors. Oral surgery was performed to increase the vestibule depth of the upper lip. Once edge-to-edge occlusion was obtained, anterior veneers were placed to improve aesthetic and stabilize occlusion, especially with the lack of posterior support.

DISCUSSION

The multidisciplinary treatment approach, involving orthodontic treatment, periodontal surgery and oral rehabilitation, played a crucial role in achieving favorable results. This case highlights the successful use of miniscrews as a viable orthodontic approach for patients with severe RDEB.

Dentoperiodontal and skeletal changes induced by miniscrew-assisted rapid maxillary expansion (C-expander) treatment in adults: A retrospective clinical trial

INTRODUCTION

The objective of this study was to evaluate the dental periodontal and skeletal response to ≥5 mm of expansion width achieved by C-expander treatment with posterior miniscrews placed between the first and second molars in adults.

METHODS

A total of 28 patients aged 21.91 ± 3.20 years with maxillary transverse deficiency underwent C-expander treatment. Anterior miniscrews were positioned between the first and second premolars, whereas posterior miniscrews were positioned between the first and second molars. Cone-beam computed tomography records were obtained before expansion and 3 months after expansion. The dental periodontal and skeletal changes for all patients were recorded.

RESULTS

The C-expander treatment expanded the palatal suture with slight buccal alveolar bone inclination. An increase in the nasal cavity width and a greater increase in the maxillary base bone width were observed after maxillary expansion. The expansion at the posterior nasal spine (3.78 mm) was approximately 85.7% of that at the anterior nasal spine (4.41 mm). No significant buccal dehiscence occurred after expansion, whereas the mesiobuccal alveolar bone thickness of the first molars was decreased at the 8 mm level with respect to the cementoenamel junction. The first molar showed decreased inclination (right, -0.45°; left, -0.38°, P >0.05), whereas the expansion at the apical level was less than that at the crown level. Age and the skeletal/dental expansion ratio had no discernible relationship.

CONCLUSIONS

Miniscrew-assisted C-expander treatment can be effective for adults with maxillary transverse deficiency. Rearward placement of the miniscrews may create an approximately parallel expansion. Most maxillary expansion was derived from skeletal expansion with slight alveolar bone buccal inclination.

Antimicrobial behavior of nanocoated orthodontic micro-implants: An in vitro study

OBJECTIVE

The need to overcome the failure of orthodontic micro-implants which might reach to 30% has led to the development of different methods, one of which is nanoparticle deposition.

AIM OF STUDY

To evaluate the anti-microbial efficiency of TiO2 and ZnO nanoparticles (NP) when used as a coating for orthodontic micro-implants.

METHODS

Thirty titanium alloy micro-implants were used in the presented study. They were divided into three groups according to the coating method and the coating materials used: the control group without surface coating; the titanium dioxide (TiO2)-coated group, in which direct current (DC) spattering was used to coat the micro-implants with a TiO2 layer; and the TiO2 and zinc oxide (TiO2ZnO)-coated group, in which the micro-implants were coated with a TiO2 layer via direct current (DC) spattering and a zinc oxide (ZnO) layer via laser vacuum. The micro-implant surfaces were characterized using scanning electron microscopy (SEM) and an energy-dispersive spectrometer (EDS). The antibacterial susceptibility was assessed using gram-positive and gram-negative bacteria.

RESULTS

SEM and EDS tests confirmed the coating of the micro-implants in the TiO2- and TiO2ZnO-coated groups. The micro-implants in the TiO2- and TiO2ZnO-coated groups demonstrated higher antibacterial ability than the control group.

CONCLUSION

This study demonstrated the significance of improving the surface of orthodontic micro-implants by coating them with TiO2 and ZnO nanoparticles to improve osseointegration and prevent biofilm formation.

A comparative study on anterior teeth retraction-related hard and soft tissue changes with physiologic anchorage control technique

Aim of this comparative cross-sectional study was to evaluate the effect of anterior teeth retraction and related hard and soft tissue change under physiologic anchorage control in patients with chief complain of protrusive teeth. 68 Class I or II orthodontic patients undergoing four-premolar extraction and requiring maximum or medium anchorage were included. Patients were treated with physiologic anchorage control technique (PASS group, n = 34, 18.6 ± 7.7 years, 10 male and 24 female) and self-ligation technique (Damon group, n = 34, 17.5 ± 5.4 years, 13 male and 21 female), respectively. TADs were used for anchorage reinforcement in Damon group. Pre- and post-treatment cephalograms were collected. Twenty-six skeletal, dental and soft tissue items were measured and analyzed using a blinded method. T test and paired rank-sum test were used for statistical analysis. The baseline characteristics were similar between groups (P > 0.05). After treatment, inter-group comparison showed statistically significant differences in the decrease of skeletal measurements ∠ANB (- 0.73 ± 1.05° in PASS group and - 0.25 ± 0.84° in the Damon group), Wits value (- 2.56 ± 2.29 mm in PASS group and - 0.47 ± 2.15 mm in Damon group) and soft tissue measurement UL-E (- 2.75 ± 1.36 mm in PASS group and - 2.03 ± 1.30 mm in Damon group) and the increase of FCA and Z angle, which was 2.03 ± 2.12°and 9.52 ± 4.78°in PASS group and 0.97 ± 2.12°and 6.96 ± 4.43°in Damon group, respectively (P < 0.05). Our results indicated that significant anterior teeth retraction and profile improvement could be achieved with PASS technique without additional anchorage devices. Appropriate application of physiologic anchorage control could reduce the dependence of TADs for anterior teeth retraction.

Surgical Removal of an Orthodontic Mini-Screw Displaced Into the Lateral Pharyngeal Space: A Case Report and Review of Pertinent Literature

Oral and maxillofacial surgeons are often faced with the clinical challenge of foreign body displacement into the perioral tissues and soft tissues of the head and neck. This mainly occurs either because of trauma or inadvertently during dental treatment. In addition to the maxillary sinus, iatrogenic foreign body displacement during dental treatment could happen into one of the 16 distinct fascial spaces of the head and neck region. Commonly displaced foreign bodies related to dental treatment include tooth roots or fragments, local anesthetic needles, implants and restorations. The clinical sequelae of a displaced foreign body depend on its size, shape, anatomic location and proximity to vital structures. Although patients may remain asymptomatic for a considerable amount of time, retained foreign bodies result in persistent pain, recurrent infection and scarring of soft tissue due to inflammation, all of which may complicate delayed retrieval. In addition to the history, imaging modalities such as plain radiographs and computed tomography (CT) help in locating the displaced foreign body and its subsequent retrieval. Surgical retrieval may be attempted through intraoral, transcervical and endoscopic approaches. Additionally, surgery may be aided by real-time imaging such as fluoroscopy. The present report aims to detail a case of inadvertent displacement of an orthodontic mini-screw, commonly used as a temporary anchorage device (TAD), into the lateral pharyngeal space, while attempting placement in the mandibular retromolar area. The case report also describes the surgical retrieval procedure of the TAD screw using an intraoral approach and with fluoroscopy guidance using C-Arm radiographic imaging. This case is reported along with the pertinent review of literature, as it not only explains a rare complication of orthodontic mini-screw placement but also details a modality to remove displaced foreign bodies from fascial spaces of the head and neck, which are otherwise directly inaccessible.

A Novel Approach for Orthodontic Extrusion Prior to Intentional Replantation: A Case Report

AIM

This case report aimed to present a novel surgical technique involving orthodontics luxation of the offended tooth using miniscrew prior to performing intentional replantation (IR) to remove an extruded separated instrument that injured the inferior alveolar nerve (IAN).

BACKGROUND

Intentional replantation is a dental procedure that involves extracting a tooth, managing the root canal, and then reinserting the tooth back into its socket. This procedure is typically used as a last resort when other treatment options have failed or are not possible. Intentional replantation can be successful in preserving the tooth and preventing tooth loss, but it is important to note that there are risks involved. Maintaining the viability of the periodontal ligament (PDL) is a pivotal step to achieve a favorable outcome.

CASE DESCRIPTION

A 15-year-old female patient came to the clinic complaining of electric-like pain in the left mandibular posterior area that radiated to the left ear and sometimes caused a headache. Upon clinical and radiographic evaluation, extruded endodontic file from the mesial root of the left first molar that penetrated the IAN canal was noticed. Nonsurgical root canal retreatment was performed, which failed to retrieve the separated file. Orthodontics luxation of the offended tooth was done 2 weeks before the surgical intervention using a miniscrew to induce PDL inflammation, which increased the tooth mobility and PDL volume, facilitating the atraumatic extraction and reduced the risk of complications, such as root resorption and ankylosis. Then, IR was performed, and the extruded file was successfully retrieved. Three months follow-up showed complete recovery of the endodontics-related IAN injury symptoms. Preapical radiographic evaluation and cone-beam computed tomography scan showed complete healing of the periapical radiolucency/area of low density and complete formation of the PDL space and lamina dura around the resected roots.

CONCLUSION

This novel approach using a miniscrew suggests a noninvasive technique that minimizes the damage to the offended tooth surrounding tissues as well as minimizing the morbidity of the adjacent teeth and the vital anatomical structures.

CLINICAL SIGNIFICANCE

Multidisciplinary comprehensive preplanning of complicated cases is essential to maximize treatment efficiency. The orthodontic extrusion facilitates the extraction process that helps in preserving the PDL, and ultimately increases the survivability of the teeth. How to cite this article: Alharbi MA, Alghamdi BA, Alswajy WA, et al. A Novel Approach for Orthodontic Extrusion Prior to Intentional Replantation: A Case Report. J Contemp Dent Pract 2023;24(11):895-901.

Improved super-elastic Ti–Ni alloy wire intrusion arch for skeletal class II malocclusion combined with deep overbite: A case report

BACKGROUND

Treatment for deep overbite cases can be difficult. This case report presents some techniques with improved super-elastic Ti–Ni alloy wire (ISW) for deep overbite correction.

CASE SUMMARY

A 21-year-old woman had a chief complaint of flaring maxillary teeth. Orthodontic evaluation revealed a skeletal class II malocclusion and a convex profile appearance. A deep overbite with palatal impingement and large overjet were also noted. Bilateral maxillary first premolars were extracted, and spaces were closed using a closed-coil spring and elastic chain. The deep overbite was corrected by applying the ISW curve and ISW intrusion arch. Intermaxillary elastics was used to adjust the intermaxillary relationship. Active treatment took approximately 3 years, and the appearance and dentition alignment noticeably improved.

CONCLUSION

The use of the ISW technique in a case of skeletal class II malocclusion with deep overbite achieved a desirable result, and the patient was satisfied with the treatment outcome.

Can computer-guided surgery help orthodontics in miniscrew insertion and corticotomies? A narrative review

Orthodontics has considerably increased the use of technology combined with surgery as a tool to improve dental movements in terms of predictability, acceleration of movement, and fewer side effects. To achieve these goals miniscrews and corticotomy were introduced. The digital workflow permits an increase in the accuracy of surgical and orthodontic setups. The tool that transfers the information is the CAD/CAM (Computer-Aided Design/ Computer-Aided Manufacturing) template. The aim of this review is to illustrate the use of computer-guided surgery in orthodontics regarding miniscrews and piezocision. The search strategy was a combination of Medical Subject Headings (Mesh) and free text words for PubMed. A total of 27 articles were included in this review: 16 concerned miniscrews and 11 concerned corticotomy. The current need for faster treatments, the improved systems of anchorage, and the evolution of imaging technologies require operators to be knowledgeable of the digital workflow. CAD/CAM templates allow greater precision and predictability of miniscrew insertion even if in the hands of less experienced clinicians and permit a better orientation and depth of the cortical incision. In conclusion, digital planning makes surgery faster and easier and allows for the identification and correction of any potential problem before the procedure.

Evaluation of the Patient-Reported Outcome Measures (PROMs) With Temporary Skeletal Anchorage Devices in Fixed Orthodontic Treatment: A Systematic Review

Analysis of patient-reported outcome measures (PROMs) is essential to ensure that the skeletal and traditional anchoring methods are appropriately and effectively utilized in the context of patient acceptance and satisfaction. This review's objective was to assess the available data on the levels of discomfort, soft-tissue irritation, functional impairment, and other patient-reported outcomes related to the usage of mini-implants in the context of fixed orthodontic treatment for adult patients. A total of seven electronic bibliographic databases were searched between January 1995 and February 2022. Moreover, a manual search was done in the selected orthodontic journals. This systematic review (SR) covered cohort studies, retrospective studies, randomized clinical trials (RCTs), and controlled clinical trials (CCTs) that studied the use of mini-implants, mini-plates, or onplants as anchorage devices on patients receiving orthodontic treatment. The risk of bias was assessed using Cochrane's risk of bias tool (RoB2 tool). Three RCTs and two cohorts were included in this SR with a total of 468 patients. Three of the four included studies were at high risk of bias. The pain level was in the "mild-to-moderate" category on the first day following the insertion of mini-implants, then decreased to a mild level from the fifth day to the seventh day of insertion (mean values are 36.61, 16.36, and 11.33, respectively). The levels of functional impairments were found to be located between the "mild-to-moderate" and "moderate" categories after the placement of mini-plates and intermaxillary fixation screws, while they experienced a mild level with mini-implants. The greatest pain levels were found after the insertion of the temporary anchorage devices (TADs) and then decreased until they became mild or disappeared completely after one month. Speaking, chewing, and cleaning difficulties were more problematic when using TADs compared to conventional anchorage. To obtain good evidence in this area, more high-quality RCTs are needed.

Investigation of periodontal status and bacterial composition aroundmini-implants

INTRODUCTION

Mini-implants are now widely used in orthodontic treatment. Soft-tissue inflammation around the mini-implant is an important factor affecting its stability. This study aimed to investigate the periodontal status and the bacterial composition around mini-implants.

METHODS

A total of 79 mini-implants in 40 patients (aged 18-45 years) were evaluated in this study. The mini-implant probing depth (mPD), mini-implant gingival sulcus bleeding index (mBI), mini-implant plaque index (mPLI), and the composition of the supragingival and subgingival plaque around the mini-implants were recorded. After Congo red staining, the bacteria were classified and counted under a light microscope.

RESULTS

The mPLI and mBI around mini-implants in the infrazygomatic crest were higher than those in the buccal shelf and interradicular area. The mPD was higher on the coronal site of the mini-implant than on the mesial, distal, and apical sites in the infrazygomatic crest. The mPLI around the mini-implant was positively correlated with the mBI, and the mBI was positively correlated with the mPD. The supragingival and subgingival bacterial composition around the mini-implants was similar to that of natural teeth. Compared with supragingival bacterial composition, the subgingival bacteria of mini-implants had a significantly lower proportion of cocci and a higher proportion of bacilli and spirochetes.

CONCLUSIONS

The bacteria composition of the plaque and the location are important factors in the inflammation around mini-implants. Similar to natural teeth, mini-implants require health maintenance to prevent inflammation of the surrounding soft tissue and maintain stability.

Biomimetic calcium phosphate coating on medical grade stainless steel improves surface properties and serves as a drug carrier for orthodontic applications

OBJECTIVE

Recently, stainless steel (SSL) miniscrew implants have been used in orthodontic clinics as temporary anchorage devices. Although they have excellent physical properties, their biocompatibility is relatively poor. Previously, our group developed a two-phase biomimetic calcium phosphate (BioCaP) coating that can significantly improve the biocompatibility of medical devices. This study aimed to improve the biocompatibility of SSL by coating SSL surface with the BioCaP coating.

METHODS

Titanium (Ti) discs and SSL discs (diameter: 5 mm, thickness: 1 mm) were used in this study. To form an amorphous layer, the Ti discs were immersed in a biomimetic modified Tyrode solution (BMT) for 24 h. The SSL discs were immersed in the same solution for 0 h, 12 h, 24 h, 36 h and 48 h. To form a crystalline layer, the discs were then immersed in a supersaturated calcium phosphate solution (CPS) for 48 h. The surface properties of the BioCaP coatings were analysed. In addition, bovine serum albumin (BSA) was incorporated into the crystalline layer during biomimetic mineralisation as a model protein.

RESULTS

The morphology, chemical composition and drug loading capacity of the BioCaP coating on smooth SSL were confirmed. This coating improved roughness and wettability of SSL surface. In vitro, with the extension of BMT coating period, the cell seeding efficiency, cell spreading area and cell proliferation on the BioCaP coating were increased.

SIGNIFICANCE

These in vitro results show that the BioCaP coating can improve surface properties of smooth medical grade SSL and serve as a carrier system for bioactive agents.

Identification of Senescent Cells in Peri-Implantitis and Prevention of Mini-Implant Loss Using Senolytics

Peri-implantitis is a disease that causes the detachment of orthodontic mini-implants. Recently, stress-induced senescent cells have been reported to be involved in various inflammatory diseases. Senescent cell-eliminating drugs, termed "senolytics", can improve the symptoms of such diseases. However, the relationship between peri-implantitis and senescent cells remains unclear. In this study, we evaluated the presence of senescent cells in a rat peri-implantitis model developed with a gum ring. The effect on bone resorption and implant loss was also investigated with and without senolytics (Dasatinib and Quercetin). The number of senescence markers (p19, p21, and p16) was found to increase, and implant detachment occurred in 24 days. After the administration of senolytics, the number of senescence markers decreased and implant detachment was inhibited. This study suggests that senescent cells aggravate peri-implantitis and senolytic administration latently reduces implant loss by inhibiting senescence-related mechanisms.

A novel biomechanical system to intrude the upper incisors and control overbite: Posterior miniscrew-assisted lever arm and 2 cases report

RATIONALE

Overbite control is a key factor in orthodontic treatment. In some cases, incisor intrusion is essential and could be an optimal strategy for overbite control. The aim of this article was to introduce a biomechanical system called the posterior miniscrew-assisted lever arm, which is innovative in using existing posterior miniscrews to intrude the upper incisors and to control anterior overbite while simultaneously retracting the anterior teeth. Its efficiency in incisor intrusion has been proved with 2 cases.

PATIENT CONCERNS

Two adult women who came for orthodontic treatment with the chief complaint of convex profile were included in this study.

DIAGNOSIS

Both patients had similar malocclusions of Class II molar relationship, anterior deep overjet, and anterior deep overbite.

INTERVENTIONS

Their treatment plans were to extract 4 first premolars and insert 2 maxillary posterior buccal miniscrews. After teeth aligning and leveling, en masse retraction was started in both arches. During the space-closing stage, posterior miniscrew-assisted lever arms were placed in their upper arches so as to intrude upper incisors and control the overbite.

OUTCOMES

After respectively 4 months and 3 months of incisor intrusion, the anterior overbite was successfully reduced to the normal range in each patient. Cephalometric analysis and superimposition also confirmed the treatment effect of this biomechanical system on incisor intrusion.

LESSONS

The posterior miniscrew-assisted lever arm is a valuable biomechanical system for intruding incisors and controlling anterior overbite.

Quantitative Assessment of Posterior Maxillary Arch for Orthodontic Miniscrew Insertion Using Cone Beam Computed Tomography: A Cross-Sectional Analysis

Methods and Materials

Cone beam computed tomography records of 35 patients (70 quadrants) from maxilla were evaluated. The images were analyzed using the NNT viewer software (version 23). The measurements were made on axial sections at 2, 4, 6, and 8 mm from CEJ. The optimal sites were defined in terms of mesiodistal palatal or buccal interradicular distance, alveolar cortical bone thickness, and palatal or buccal safe depth of the bone for miniscrew insertion. Descriptive statistics, paired t-test, and repeated measure ANOVA were used to analyze the data.

Results

The mean buccal interradicular distance was the lowest between first and second molar (2.44 mm) and the highest between first and second premolar (3.28 mm). The mean palatal interradicular distance was the lowest between first and second premolar (3.64 mm) and the highest between second premolar and first molar (5.30 mm). The mean buccal safe depth was the lowest between canine and first premolar (1.96 mm) and the highest between first and second molar (2.61 mm). The mean palatal safe depth was the lowest between second premolar and first molar (3.35 mm) and the highest between first and second molar (3.56 mm). The thinnest and thickest buccal cortical thicknesses were detected on canine and first molar (1.04 mm) and on the second premolar and second molar (1.56 mm).

Conclusion

The quantity and quality of the maxillary alveolar process is an important factor to decide where to insert the orthodontic miniscrews, necessitating careful preoperative evaluation.

A Scoping Review about the Characteristics and Success-Failure Rates of Temporary Anchorage Devices in Orthodontics

This study synthesized the scientific evidence concerning the main characteristics of the Temporary Anchorage Devices (TADs) used in orthodontics and reported the success-failure rates during treatment. For that means, this scoping review collected articles from previous research. A complementary search was carried out in the databases PubMed-MEDLINE, Scopus, LILACS, and EMBASE, focusing on original studies published from 2010 to 2020. We analyzed the main characteristics of the publications. As a result, 103 articles were included. Most of the research was conducted among different groups, who needed TADs principally in the maxilla and an interradicular location between the second premolar and first molar. AbsoAnchor, Dentos Inc., Daegu, Korea, was the most used brand of TADs. The most common characteristics of the devices and biomechanics were a diameter and length of 1.6 mm and 8 mm, a self-drilled system, a closed technique for placement, immediate loading, and forces that ranged between 40 and 800 g. Of the studies, 47.6% showed success rates ≥90%. In conclusion, high success rates were found for TADs, and differences were found according to sociodemographic and clinical variables. The studies showed variability in methodological design, and scientific publications were concentrated in certain countries. We recommend further scientific research on TADs using more standardized designs.

A Simple Technique Using a Modified Nance Appliance as Anchorage for Maxillary Molar Distalization—Two Case Reports

Maxillary molar distalization to correct a dental Class II molar relationship and to create space to relieve crowding has been a long-lasting subject of debate in orthodontics. Generally, to distalize maxillary molars, an intra-arch distalization appliance is favored over an inter-arch appliance since it does not utilize mandibular dentition as an anchorage, so some unwanted side effects on mandibular incisors can be avoided. A variety of intra-arch appliances have been developed to distalize maxillary molars, such as the pendulum, Jones jig, first class appliance, distal jet, and modified C-palatal plate. Although they could achieve efficient molar distalization, the learning curve of proper appliance insertion and activation is relatively long. In addition, the appliances are not comfortable for the patients due to the bulky activation units, especially when the activation units are designed in the palatal area. The current manuscript describes a novel and effective maxillary intra-arch molar distalization appliance—a modified Nance appliance technique, which consists of: (1) palatally, a big acrylic button against the palatal rugae and connected to the premolars with wide mesh pads; (2) buccally, regular brackets on maxillary premolars and first molars with sectional round stainless steel archwires and open coil springs between the second premolar and first molar. Either bilateral or unilateral maxillary molar distalization can be achieved with this appliance, and the Class II elastics are not needed. It is simple to be fabricated, delivered, and activated, and it is comfortable for patients.

Guided Insertion of Temporary Anchorage Device in Form of Orthodontic Titanium Miniscrews with Customized 3D Templates—A Systematic Review with Meta-Analysis of Clinical Studies

(1) Background: Miniscrew insertion, using a surgical guide, aims to avoid possible adverse effects or complications. With the higher availability of both 3D imaging and printing, 3D surgical guides have been used more frequently in orthodontics. The aim of the present systematic review was to find scientific clinical evidence concerning the precision of the 3D guided insertion of miniscrews for temporary orthodontic anchorage. (2) Methods: Literature searches were performed in the following five search engines: Pubmed (Medline), Pubmed Central, Scopus, Web of Science and Embase on 10 September 2021 (articles from 1950 to 10 September 2021). A meta-analysis was performed using the random-effect model, with Standardized Mean Differences (SMD) and 95% confidence intervals (95% CI) calculated as effect estimates. The heterogeneity was assessed quantitatively. (3) Results: The search strategy identified 671 potential articles. After the removal of duplicates, 530 articles were analyzed. Subsequently, 487 papers were excluded, because they were not associated with the subject of the study. Of the remaining 43 papers, 34 were excluded because they did not meet the methodological criteria. Finally, only nine papers were subjected to a qualitative analysis. (4) Conclusions: The current literature concerning guided miniscrew insertion reveals, for the most part, a low methodological level. High-quality clinical trials are in the minority. The use of surgical guides increases insertion accuracy, stability and reduces the failure rate of orthodontic miniscrews. Tooth-borne insertion guides supported on the edges of the teeth ensure a higher insertion precision compared to mucosa-borne ones. The study protocol was registered in PROSPERO under the number CRD42021267248.

Variability associated with mandibular ramus area thickness and depth in subjects with different growth patterns, gender, and growth status

INTRODUCTION

The purpose of this study was to quantitatively evaluate the ramus bone parameters (ramus thickness and ramus depth) for miniscrew placement. An additional aim was to compare and contrast the ramus bone parameters in growing and nongrowing male and female subjects with hyperdivergent, normodivergent, hypodivergent facial types.

METHODS

Cone-beam computed tomography scans of 690 subjects were evaluated. They were classified in terms of growth status, gender, and facial type. Ramus thickness was measured as the distance from the outer (buccal) to the inner (lingual) aspects of the mandibular ramus. Ramus depth was measured as the distance from the anterior border of the ramus to the inferior alveolar nerve canal. The measurements for ramus thickness and ramus depth were performed at 3 different levels bilaterally: (1) occlusal plane (OP), (2) 5 mm above the occlusal plane (5OP), and (3) 10 mm above the occlusal plane (10OP).

RESULTS

Males showed a significantly higher ramus thickness than females (P <0.05). Ramus thickness decreased significantly (P <0.05) as we moved superior from the level of OP to 5OP and 10OP in all 3 facial types in both females (growing and nongrowing) and males (growing and nongrowing). Growing females and growing males had significantly higher ramus thickness than nongrowing females and nongrowing males, respectively. Ramus depth increased as we moved higher from the OP to 10OP. Hyperdivergent facial type showed a significantly reduced ramus depth compared with hypodivergent and normodivergent facial type in growing and nongrowing males and females at all 3 locations, namely OP, 5OP, and 10OP (P <0.05).

CONCLUSIONS

Because of adequate ramus depth and ramus thickness, 5OP was considered the optimal insertion site for the placement of miniscrews. Patients with a hyperdivergent facial type showed significantly reduced ramus depth than hypodivergent and normodivergent facial types. Ramus thickness in males was significantly higher than in females in all facial types.

Geometry of anchoring miniscrew in the lateral palate that support a tissue bone borne maxillary expander affects neighboring root damage

Anchoring miniscrews used for a tissue bone borne maxillary expander (C-expander) can fail if they contact tooth roots or perforate the maxillary sinus. Cone beam computed tomography images were reviewed retrospectively to evaluate the geometric factors of miniscrew placement in the palate that contribute to root proximity (RP) and sinus perforation (SP), and to investigate the differences of miniscrew placement depth (PD) and placement angle (PA) among the groups in each variable from 340 anchoring miniscrews on 70 patients whose C-expanders showed sufficient stability after palatal expansion for orthodontic treatment. Two types of miniscrews were used: a self-tapping miniscrew with 1.8 mm-in-diameter, and a self-drilling miniscrew with 1.6 mm-in-diameter. While the self-tapping larger diameter miniscrew influenced root proximity significantly, the screw location and PD affected the rate of sinus perforation. PA was significantly different between the right and left sides of the palate. The results of this study confirmed that root proximity and sinus perforation of anchoring miniscrews in a tissue bone borne palatal expander occurred due to certain risk factors, even when the palates were expanded successfully. Knowledge of these factors can help the clinician place miniscrews with less risk of root proximity or sinus perforation.