A 5-year retrospective clinical study of the Dentium implants

Analysis of implant-supported cantilever fixed partial denture: An in vitro comparative study on vertical misfit, stress distribution, and cantilever fracture strength

PURPOSE

To evaluate the vertical misfit, stress distribution around dental implants, and cantilever fracture strength of 3-unit implant-supported cantilever fixed partial dentures (FPDs) using frameworks made from different materials and manufacturing techniques.

MATERIALS AND METHODS

Forty FPDs were fabricated and divided into 5 groups (n = 8) based on the framework material used: LAS Co-Cr (Conventional casting-laser welding); TIG Co-Cr (Conventional casting -TIG welding); OP Co-Cr (Conventional casting-one-piece); CAD Co-Cr (CAD-CAM); and CAD Zr (CAD-CAM ZrO2). The vertical misfit was evaluated before porcelain application (T1) and before (T2), and after thermomechanical cycling (T3) by stereomicroscopy. Cantilever fracture strength was tested with a 50 kN (5000 kgf) load cell at a crosshead speed of 0.5 mm/min. Qualitative and quantitative photoelastic analysis was performed to evaluate stress distribution at seven specific points in five FPDs (n = 1/group) subjected to occlusal loading.

RESULTS

Only the molar showed interaction among the three factors (G × S × T; F(20.932) = 1.630; p = 0.044). Thermomechanical cycling (T2 vs. T3) had a significant effect on intra-group vertical misfit in molar, especially in LAS Co-Cr (Δ = 5.87; p = 0.018) and OP Co-Cr (Δ = 5.39; p = 0.007), with no significant effect in premolar (p > 0.05). Ceramic application combined with thermomechanical cycling (T1 vs. T3) caused a significant intra-group increase in vertical misfit in all groups, both in the molar and premolar (p < 0.05). OP Co-Cr was associated with greater vertical misfit and stress concentration. Frameworks manufactured by the CAD-CAM system exhibited lower vertical misfit and better stress distribution. FPDs with metal frameworks (>410.83 ± 72.26 N) showed significantly higher fracture strength (p < 0.05) than zirconia (277.47 ± 39.10 N), and the first signs of ceramic veneering fracture were observed around 900 N.

CONCLUSIONS

FPDs with frameworks manufactured using a CAD-CAM system appear to be associated with lower vertical misfit and better stress distribution, although the section of the frameworks followed by welding may be a viable alternative. In addition, metal frameworks exhibit high fracture strength.

The cumulative survival rate of dental implants with micro-threads: a long-term retrospective study

PURPOSE

This study aimed to evaluate the long-term cumulative survival rate (CSR) of dental implants with micro-threads in the neck over a 10-year follow-up period and to examine the factors influencing the survival rate of dental implants.

METHODS

This retrospective study was based on radiographic and dental records. In total, 151 patients received 490 Oneplant® dental implants with an implant neck micro-thread design during 2006-2010 in the Department of Periodontology of Seoul National University Dental Hospital. Implant survival was evaluated using Kaplan-Meier analysis. Cox proportional hazard regression analysis was used to identify the factors influencing implant failure.

RESULTS

Ten out of 490 implants (2.04%) failed due to fixture fracture. The CSR of the implants was 97.9%, and no significant difference was observed in the CSR between external- and internal-implant types (98.2% and 97.6%, respectively, P=0.670). In Cox regression analysis, 2-stage surgery significantly increased the risk of implant failure (hazard ratio: 4.769, P=0.039). There were no significant differences in influencing factors, including sex, age, implant diameter, length, fixture type, location, surgical procedure, bone grafting, and restoration type.

CONCLUSIONS

Within the limitations of this retrospective study, the micro-thread design of the implant neck was found to be favorable for implant survival, with stable clinical outcomes.

OII-DS: A benchmark Oral Implant Image Dataset for object detection and image classification evaluation

In recent years, there is been a growing reliance on image analysis methods to bolster dentistry practices, such as image classification, segmentation and object detection. However, the availability of related benchmark datasets remains limited. Hence, we spent six years to prepare and test a bench Oral Implant Image Dataset (OII-DS) to support the work in this research domain. OII-DS is a benchmark oral image dataset consisting of 3834 oral CT imaging images and 15240 oral implant images. It serves the purpose of object detection and image classification. To demonstrate the validity of the OII-DS, for each function, the most representative algorithms and metrics are selected for testing and evaluation. For object detection, five object detection algorithms are adopted to test and four evaluation criteria are used to assess the detection of each of the five objects. Additionally, mean average precision serves as the evaluation metric for multi-objective detection. For image classification, 13 classifiers are used for testing and evaluating each of the five categories by meeting four evaluation criteria. Experimental results affirm the high quality of our data in OII-DS, rendering it suitable for evaluating object detection and image classification methods. Furthermore, OII-DS is openly available at the URL for non-commercial purpose: https://doi.org/10.6084/m9.figshare.22608790.

Clinical Evidence on a Novel Macrohybrid Design Dental Implant with 12° Angled Platform: A Systematic Review

Background: Immediate implant placement with immediate esthetics has become a more common procedure over time, though ensuring good emergence of the axis of the implant has been a challenge. A novel macroimplant design with an angled platform (Co-Axis^®) has been developed to ensure exit of the head of the implant in the correct prosthetic position. A systematic literature review was carried to determine the survival rate and marginal bone loss associated with these implants. Material and Methods: An electronic and manual literature search was made in accordance with the PRISMA statement. The search strategy was limited to human studies, retrospective and prospective clinical trials, cross-sectional studies, and cohort studies reporting outcomes of a novel macrohybrid implant with a 12° angled implant connection. Results: Three articles met the inclusion criteria and were reviewed in the analysis. The estimated success rate was 95.9%. The global marginal bone loss was estimated to be −0.17 ± 0.58 mm in an environment characterized by great heterogeneity (I² = 99%). The estimated mean implant stability was 69.6 ± 0.92 (ISQ). As only two studies provided the required information, it was not possible to determine publication bias. Lastly, mean recession was estimated to be practically zero (0.06 ± 0.23 mm), with great heterogeneity. Conclusions: Within the limitations of this systematic review, it can be affirmed that immediate implant treatment with Co-Axis^® implants shows a survival rate of 95.9% at one year of follow-up, with low marginal bone loss values, near-zero soft tissue recession, and favorable papilla index values. Nevertheless, the great heterogeneity of the data requires the findings to be interpreted with caution.

Anti-infection mechanism of a novel dental implant made of titanium-copper (TiCu) alloy and its mechanism associated with oral microbiology

This work was focused on study of anti-infection ability and its underlying mechanism of a novel dental implant made of titanium-copper (TiCu) alloy. In general, most studies on antibacterial implants have used a single pathogen to test their anti-infection ability using infectious animal models. However, dental implant-associated infections are polymicrobial diseases. We innovatively combine the classic ligature model in dogs with sucrose-rich diets to induce oral infections via the canine native oral bacteria. The anti-infection ability, biocompatibility and underlying mechanism of TiCu implant were systematically investigated in comparison with pure Ti implant via general inspection, hematology, imageology (micro-CT), microbiology (16S rDNA and metagenome), histology, and Cu ion detections. Compared with Ti implant, TiCu implant demonstrated remarkable anti-infection potentials with excellent biocompatibility. Additionally, the underlying anti-infection mechanism of TiCu implant was considered to involve maintaining the oral microbiota homeostasis. It was found that the carbohydrates in the plaques formed on the surface of TiCu implant were metabolized through the tricarboxylic acid cycle (TCA) cycles, which prevented the formation of an acidic microenvironment and inhibited the accumulation of acidogens and pathogens, thereby maintaining the microflora balance between aerobic and anaerobic bacteria.

Implant treatment after traumatic tooth loss: A systematic review

BACKGROUND/AIMS

Treatment after traumatic tooth loss is challenging and is currently guided by expert opinion and the individual patient situation. The aim of this study was to provide an overview on the outcome of dental implant treatment in the anterior maxilla after traumatic tooth loss, based on a systematic review of the existing evidence.

MATERIALS AND METHODS

A systematic search of the literature was performed on PubMed, Cochran Library and Web of Science following the PRISMA guidelines based on a structured research question (PICO). All clinical studies of five patients or more with follow-up of at least 1 year after implant loading were included. Patients were at least 18 years of age. Cohen's Kappa-coefficient was calculated. The Newcastle-Ottawa Scale was applied to assess the quality of the included studies. Descriptive statistical methods were applied.

RESULTS

Nine hundred and ninety-nine articles were identified through the systematic search. Finally, six articles were eligible for inclusion. The studies comprised prospective and retrospective cohort studies and case series. From these, 96 patients with 120 implants were included. The age ranged from 18 to 59 years. The survival rates of implants and superstructures were 97% and 95%, respectively, after a mean follow-up of 3.5 years. Mean marginal bone resorption was 0.56 mm (range 0.21-1.30 mm). Complication rates were 7% and 11% on implant and superstructure level, respectively. Patient-reported outcome measures and objective evaluations showed a high level of satisfaction with the aesthetic outcome. Bone augmentation was performed in 60 implant sites. Three patients underwent pre-surgical orthodontic treatment. The maxillary central incisor was the most frequently replaced tooth (70%).

CONCLUSIONS

This systematic review revealed a low level of evidence on the outcome of dental implant treatment after traumatic tooth loss. Systematic reporting of treatment outcomes of tooth replacements after dental trauma is highly encouraged to further guide dentists for the benefit of these challenging patients.

Effect of materials on axial displacement and internal discrepancy of cement-retained implant-supported prostheses

STATEMENT OF PROBLEM

How axial displacement may be affected by the mechanical properties and internal discrepancy of a cement-retained implant-supported prosthesis is unclear.

PURPOSE

The purpose of this in vitro study was to assess the difference in internal discrepancy and axial displacement according to the prosthesis material in cement-retained prostheses splinting nonparallel implants.

MATERIAL AND METHODS

Computer-aided design and computer-aided manufacture (CAD-CAM) titanium abutments were fabricated for a vertically placed implant and a 15-degree tilted implant. Three types of prostheses, in zirconia, cobalt-chromium (Co-Cr) alloy, and polymethylmethacrylate resin (PMMA), were fabricated (n=10). The internal discrepancy between the CAD-CAM titanium abutment and the prosthesis was measured by using the replica technique. After luting with an interim cement, they were mounted in Type IV gypsum. The specimens were cyclic loaded, and axial displacement of the prosthesis was measured after 3, 10, 100, and 10⁶ cycles. The internal discrepancy and cumulative axial displacement were assessed by using a 3-way analysis of variance and repeated measures analysis of variance (α=.05).

RESULTS

The internal discrepancy of the prosthesis did not differ based on the prosthesis material (P=.869); however, it was significantly different based on the measurement location, with the occlusal discrepancy (224 ±29 μm) being greater than the axial discrepancy (21 ±10 μm) (P<.05). Implants with an angled placement exhibited less axial displacement than implants with vertical placement (P<.05). The PMMA prosthesis demonstrated significantly greater axial displacement than the zirconia or Co-Cr prostheses (P<.05), which were similar (P=.623).

CONCLUSIONS

Prostheses made with high-elastic moduli materials exhibited less axial displacement than PMMA prostheses, even though the internal discrepancy was not different. Moreover, vertically placed implants presented a greater axial displacement of the prosthesis than implants with angled placement.

Evaluation of the Peri-Implant Bone Level around Platform-Switched Dental Implants: A Retrospective 3-Year Radiographic Study

OBJECTIVE

To describe remodeling of the mesial and distal marginal bone level around platform-switched (PS) and platform-matched (PM) dental implants that were sandblasted with large grit and etched with acid over a three-year period.

MATERIALS AND METHODS

Digital periapical radiographs were obtained at the following time-points: during Stage I of the surgical placement of dental implants, before loading, immediately after loading (baseline), and one, three, six, 12, and 36 months after loading for measuring the horizontal and vertical marginal bone levels.

RESULTS

Sixty implants were successfully osseointegrated during the overall observation period. Vertical marginal bone levels for the PS and PM dental implants were 0.78 ± 0.77 and 0.98 ± 0.81 mm, respectively, whereas the horizontal marginal bone levels for the PS and PM implants were 0.84 ± 0.45 and 0.98 ± 0.68 mm, respectively. During the time leading up to the procedure until 36 months after the procedure, the average vertical marginal bone level resulted in less bone loss for the PS and PM groups-0.96 ± 1.28 and 0.30 ± 1.15 mm, respectively (p < 0.05). The mean levels of the horizontal marginal bone also showed increases of 0.48 ± 1.01 mm in the PS and 0.37 ± 0.77 mm in the PM groups from the time before loading until 36 months after the procedure. However, these increases were not statistically significant (p > 0.05).

CONCLUSION

PS dental implants appeared to be more effective than PM implants for minimizing the mean marginal vertical and horizontal marginal bone loss during the three-year period. Regardless of which abutment connection was used, the dental implant in the present retrospective investigation exhibited minimal marginal bone remodeling, thus indicating long-term stability.

Implant supported cantilevered fixed dental rehabilitations in partially edentulous patients: Systematic review of the literature. Part I

OBJECTIVES

To investigate in which clinical situations a cantilever fixed implant supported restorations can be a treatment alternative and which complications are reported.

MATERIALS AND METHODS

Two operators screened the literature (MEDLINE, EMBASE) and performed a hand search on the main journals dealing with implantology and prosthetics until 31 December 2017. Only articles that considered cantilever implant fixed restorations with at least 10 patients and with a mean follow-up of at least 5 year were selected. The outcome variables were survival of implants and prosthesis, mechanical, technical and biological complications, marginal bone loss. The review was performed according to the PRISMA statements. Risk of bias assessment was evaluated. Failure and complication rates were analysed using random effect Poisson regression models to obtain summary estimate of 5- and 10-year survival and complication rates.

RESULTS

A total of nine papers were selected for partially edentulous patients and reported high survival rate of the prosthesis. The estimated survival rate for 5-10 years was calculated to be 98.4% for the implants and 99.2% for the rehabilitations. Mechanical, technical and biological complications were reported with a cumulative 5-10 years complication rate of 28.66% and 26.57% for the patients and for the prosthesis, respectively. Two papers for single implant supporting 2-unit cantilever were not sufficient to draw conclusions.

CONCLUSIONS

There is evidence that cantilever can be successful treatment in partially edentulous patients. In two adjacent edentulous sites, data are not yet sufficient.

Three-year Prospective Evaluation of Immediately Loaded Mandibular Implant Overdentures retained with Locator Attachments

INTRODUCTION

Immediate implant-loading protocol has progressed because of various clinical advantages offered by this treatment approach. However, available studies on edentulous patients are still few compared to those in which delayed implant-loading protocol was applied.

AIM

This prospective study was to evaluate the implant survival rate and the peri-implant tissue response in a group of patients who received two unsplinted immediately loaded dental implants in the mandibular anterior region to retain a complete overdenture using locator attachments.

MATERIALS AND METHODS

A total of 24 edentulous patients with a mean age of 63.4 years were involved in this study following certain inclusion criteria. All patients received a new set of complete dentures before implant positioning. Two Prima Connex tapered implants were put in the interforaminal area of the mandible with a flapless surgical procedure, and the prefabricated dentures were immediately retained with a zest locator attachment. Clinical and radiographic records of the patients were reviewed immediately after placement of the implant, at 3 months, and at 1, 2, and 3 years following fixture installation. The obtained data were analyzed using paired samples t-test and the Wilcoxon signed-rank test at 0.05 significance level.

RESULTS

At 3 years, all implants had osseointegrated with a 100% survival rate. In addition, the total mean marginal bone change was -0.89 ± 0.14 mm, and the mean periotest value was -7.631 ± 0.921.

CONCLUSION

Results of this study propose that immediate loading of mandibular implant overdentures that are retained with locator attachments was a feasible treatment alternative for this particular group of patients.

CLINICAL SIGNIFICANCE

Immediate implant- loading of mandibular implant overdentures that are retained with locator attachments is a reliable treatment option Keywords: Immediate implant loading, Implant survival rate, Locator attachments, Overdenture.

Cumulative survival rate and associated risk factors of Implantium implants: A 10-year retrospective clinical study

PURPOSE

The objective of this study was to determine the cumulative survival rate (CSR) and associated risk factors of Implantium implants by retrospective clinical study.

MATERIALS AND METHODS

Patients who received Implantium implants (Dentium Co., Seoul, Korea) at Korea University Guro Hospital from 2004 to 2011 were included. The period between the first surgery and the last hospital visit until December 2015 was set as the observation period for this study. Clinical and radiographic data were collected from patient records, including all complications observed during the follow-up period. Kaplan-Meier analysis was performed to examine CSR. Multiple Cox proportional hazard model was employed to assess the associations between potential risk factors and CSR.

RESULTS

A total of 370 implants were placed in 121 patients (mean age, 56.1 years; range, 19 to 75 years). Of the 370 implants, 13 failed, including 7 implants that were lost before loading. The 10-year cumulative survival rate of implants was 94.8%. The multiple Cox proportional hazard model revealed that significant risk factor of implant failure were smoking and maxillary implant (P<.05).

CONCLUSION

The 10-year CSR of Implantium implants was 94.8%. Risk factors of implant failure were smoking and maxillary implant.

Treatment of Orally Handicapped Edentulous Older Adults Using Dental Implants

The oral handicap of complete edentulism is the terminal outcome of a multifactorial process involving biological factors and patient-related factors. Fully edentulous orally handicapped older adults have been neglected because removable acrylic dentures have been the classic therapy for complete edentulism but are only rehabilitative, not therapeutic. Not replacing missing teeth with stable dentures could prevent adequate food intake. Osseointegrated endosseous implants used as a therapeutic adjunct can reduce the problem of long-term bone resorption to less than 0.1 mm per year. Implant-borne prostheses substantially increase the overall health and quality of life of orally handicapped fully edentulous older adults.

Indications and contraindications of dental implants in medically compromised patients: update

The aim of this study was to review the current scientific literature in order to analyse the indications and contraindications of dental implants in medically compromised patients. A reference research was carried out on PubMed using the key words “implant” AND (oral OR dental) AND (systemic disease OR medically compromised), in articles published between 1993 and 2013. The inclusion criteria were the following: clinical studies in which, at least, 10 patients were treated, consensus articles, reviewed articles and meta-analysis performed in humans treated with dental implants, and which included the disease diagnosis. A total of 64 articles were found, from which 16 met the inclusion criteria. Cardiac systemic diseases, diabetic endocrine pathologies or controlled metabolic disorders do not seem to be a total or partial contraindication to the placement of dental implants. Tobacco addiction, and head and neck radiotherapy are correlated to a higher loss of dental implants. Patients suffering from osteoporosis undergoing biphosphonates therapy show an increased risk of developing bone necrosis after an oral surgery, especially if the drugs are administered intravenously or they are associated to certain concomitant medication.

Key words:Dental implants, medically compromised patient, systemic diseases.