The effect of a desensitizer and CO2 laser irradiation on bond performance between eroded dentin and resin composite

Chemical and morphological analysis of dentin irradiated by different high-power lasers: a systematic review

PURPOSE

This systematic review provides an overview of the main chemical and morphological alterations generated on dentin by different high-power lasers' irradiation.

METHODS

The review was registered in PROSPERO (CRD42023394164) and PRISMA guidelines were followed. The search strategy was conducted on MEDLINE (PubMed), Embase (Elsevier), and Web of Science (Clarivate) databases. The eligibility criteria were established according to the PICOS strategy, focusing on in vitro and ex vivo studies that assessed the chemical and morphological changes in dentin using five high-power lasers: Nd:YAG (1064 nm), Er:YAG (2940 nm), Er, Cr:YSGG (2780 nm), diode (980 nm), and CO2 (10,600 nm). Publication range was from 2010 to 2022. Data was summarized in tables and risk of bias was assessed by QUIN tool.

RESULTS

The search resulted in 2255 matches and 57 studies composed the sample. The methods most used to assess the outcomes were scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Raman. The studies presented "medium" and "low" risk of bias. The laser prevalently identified was the Er:YAG laser, associated with dentin ablation, absence of smear layer, and exposed tubules. The Nd:YAG laser generated vitreous surface and thermal damage, such as carbonization and cracks. The other lasers caused an irregular surface and no adverse thermal effects. Regarding the chemical structure, only the Er,Cr:YSGG laser caused collagen matrix reduction. The effects found were more intense with higher dosimetry.

CONCLUSION

Evidence available indicates that the irradiation of dentin with high-power lasers are related to morphological outcomes favorable to adhesive restorative procedures, with minimal changes in collagen matrix and mineral content. However, those observations should be carried carefully by clinicians and more clinical trials regarding the association of high-power laser irradiation and restorative procedure longevity are needed.

The effect of desensitizing agents on the bond strength of dentin bonding agents: A systematic review

Background

Dentinal hypersensitivity (DH) is a common dental problem and is treated non-invasively using topical application of various desensitizing agents. When there is loss of tooth structure or tooth preparation is to be followed by a bonded restoration, it requires application of dentin bonding agent. However, the effect of desensitizers on bond strength is still controversial.

Aim and Objective

To evaluate the influence of different desensitizing agents on the bond strength of the dentin bonding agents.

Methods and Materials

PICO strategy was used to formulate the research question. In-vitro studies conducted on human teeth to evaluate the bond strength of dentin bonding agent following the application of desensitizing agent were included. Electronic databases PubMed and Cochrane and google scholar were searched using search terms alone or in combination from the year 2010 till 2020. Search was conducted using the key words and MeSH terms (hypersensitivity, bond strength, dental adhesives, dentin bonding agents). The title and abstract were read to verify the inclusion and exclusion criteria and if further any details required, full article was accessed to check the criteria and then included or excluded. Data extraction was done using a customized data extraction form. The risk of bias was evaluated using modified Cochrane Collaboration Quality Assessment tool.

Results

Total no of studies identified in the search were 146, after scrutiny 23 articles were eligible to be included in this study. Out of 23 articles, 17 articles were of medium bias and 6 articles were of high risk after risk of bias assessment.

Conclusion

According to the various articles included in this study, GLUMA and 8.0%Arginine and CaCO3 when used as desensitizing agents along with different bonding agents, were found to be highly compatible without interfering with the bond strength of the dentin adhesives.

Biodentine or Mineral Trioxide Aggregate as Direct Pulp Capping Material in Mature Permanent Teeth with Carious Exposure? A Systematic Review and Meta-analysis

OBJECTIVE

To evaluate the success rate of direct pulp capping (DPC) with Biodentine in mature permanent teeth with carious vital pulp exposure compared to that of DPC with mineral trioxide aggregate (MTA) by means of a systematic review and meta-analysis.

DATA SOURCES

The two authors searched independently the literature published through July 31, 2020, in five electronic databases (PubMed, the Cochrane Central Register of Controlled Trials, Web of Science Core Collection, the Wiley Online Library, and the SCOPUS database).

STUDY SELECTION

The research protocol was previously registered in the PROSPERO database (CRD42020192511). Clinical studies that met the inclusion criteria were chosen and independently screened by the authors.

DATA EXTRACTION

A custom-designed spreadsheet was used to extract the data. The quality of each study was evaluated by means of the revised Cochrane risk of bias (ROB) tool or the ROB of nonrandomized studies of interventions tool.

DATA SYNTHESIS

Three randomized controlled trials and one retrospective study met the inclusion criteria. Only one study had a high risk of bias. The included studies reported data on a total of 95 participants with an age range of 8-51 years. No significant difference was observed in the overall treatment outcome when comparing Biodentine with MTA (Risk ratio=1.00, 95% confidence interval [0.93-1.07], p=1.00).

CONCLUSIONS

Biodentine had comparable clinical and radiographic success to that of MTA when used as a DPC agent in mature permanent teeth with carious vital pulp exposure. Additional high-quality studies are needed.

The effects of 45S5 bioactive glass and Er:YAG Laser on the microtensile bond strength of fluorosed teeth

This vitro study aimed to evaluate the effects of 45S5 bioactive glass (BAG) and Er:YAG laser as desensitization treatments on the microtensile bond strength (MTBS) of fluorosed teeth. The 120 noncarious fluorosis were to obtain superficial dentin, being classified into four groups according to the Thylstrup and Fejerskov Index (TFI). Specimens from each group were randomly divided into five subgroups. After fluorosed teeth hypersensitivity models were established, the following pretreatments were applied on dentine surface: Subgroup 1: deionized water (Control); Subgroup 2: BAG; Subgroup 3: Er:YAG laser; Subgroup 4: BAG + Er:YAG laser, and Subgroup 5: Er:YAG laser + BAG. One sample was randomly selected from each subgroup for scanning electron microscope (SEM). The remaining samples were bonded with composite resin by Adper Single Bond 2 adhesive. Then water bath at 37°C for 24 hr. After 5,000 thermocycling, MTBS was tested and fracture mode was analyzed. The difference of MTBS between BAG group and Control group was found statistically significant (p < .05) in fluorosis. The Er:YAG laser + BAG group showed lowest MTBS values in fluorosis. In conclusion, the pretreatment of BAG might be beneficial to the adhesive of fluorosed teeth. Er:YAG laser desensitization alone or using BAG first and then Er:YAG laser desensitization might not affect the adhesive of fluorosed teeth, while Er:YAG laser desensitization followed by the pretreatment of BAG would be not conducive to the adhesive of fluorosed teeth.

Effect of Dental Erosion and Methods for its Control on the Marginal and Internal Adaptation of Restorations with Different Adhesive Systems

AbstractThe dentin exposed to erosive challenges is often superficially protected to prevent progression of the lesion. This study investigated the marginal and internal adaptation of composite resin restorations made on surfaces that had first been treated with different methods for controlling erosion. Cavities with margins in dentin were prepared in bovine incisors (n=360) and were divided into three groups according to the method for controlling the erosive challenge: negative control, topical application of fluoride and resin-modified glass ionomer varnish. The specimens were then randomly divided into three sub-groups according to the exposure to simulated gastric acid solution (DES) (5% HCl, pH=2.2) and subsequent remineralization (RE): negative control, 9 and 18 cycles of DES-RE. Finally, teeth were divided into four groups, depending on the bonding agent used for composite resin restoration (n=10): conventional etch-and-rinse adhesive system (2 and 3 steps) and self-etching (1 and 2 steps). Front and internal images of the interface tooth/restoration were recorded in stereoscopic microscope (15x) to quantify the percentage of adhesive failures. Despite the promising results of the resin-modified glass ionomer varnish after 9 cycles; no protective material prevented increased internal defects after 18 erosive cycles. More continuous internal margins were noted with etch-and-rinse acid systems after more intense erosion. The maintenance of internal margins in eroded substrates was positively influenced by the resin-modified glass ionomer varnish and, under the most aggressive challenge, by the use of etch-and-rinse adhesives systems. Keywords: Tooth Erosion. Dentin. Acid Gastric. ResumoA dentina exposta a desafios erosivos é muitas vezes superficialmente protegida para prevenir a progressão da lesão. Este estudo investigou a adaptação marginal e interna de restaurações de resina composta realizadas em superfícies que foram previamente tratadas com diferentes métodos para controlar a erosão. Cavidades com margens em dentina foram preparadas em dentes incisivos bovinos (n=360) e divididas em três grupos de acordo com o método de controle do desafio erosivo: controle negativo, aplicação tópica de flúor e verniz de ionômero de vidro modificado por resina. Os espécimes foram então divididos aleatoriamente em três subgrupos de acordo com a exposição à solução de ácido gástrico simulada (DES) (HCl a 5%, pH = 2,2) e posterior remineralização (RE): controle negativo, 9 e 18 ciclos de DES-RE. Por fim, os dentes foram divididos em quatro grupos, de acordo com o agente de união utilizado para a restauração da resina composta (n=10): sistema adesivo convencional (2 e 3 passos) e autocondicionante (1 e 2 passos). Imagens frontais e internas da interface dente/restauração foram registradas em microscópio estereoscópico (15x) para quantificar a porcentagem de falhas adesivas. Apesar dos resultados promissores do verniz de ionômero de vidro modificado por resina após 9 ciclos; nenhum material de proteção impediu o aumento de defeitos internos após 18 ciclos erosivos. Margens internas mais contínuas foram observadas com sistemas adesivos convencionais após erosão mais intensa. A manutenção das margens internas em substratos erodidos foi influenciada positivamente pelo verniz de ionômero de vidro modificado por resina e, sob o desafio mais agressivo, pelo uso de sistemas de adesivos convencionais. Palavras-chave: Erosão Dentária. Dentina. Ácido Gástrico.

Microleakage and Shear Bond Strength of Composite Restorations Under Cycling Conditions

OBJECTIVES

The aim of this study was to evaluate microleakage and shear bond strength of composite restorations under different cycling conditions.

METHODS AND MATERIALS

Class V cavities were prepared in the buccal and lingual surfaces of 30 human molars (n=60). A further 60 molars were used to prepare flat enamel and dentin specimens (n=60 each). Cavities and specimens were divided into six groups and pretreated with an adhesive (self-etch/Clearfil SE Bond or etch-and-rinse/Optibond FL). Composite was inserted in the cavities or adhered to the specimens' surfaces, respectively, and submitted to cycling (control: no cycling; thermal cycling: 10,000 cycles, 5°C to 55°C; thermal/erosive cycling: thermal cycling plus storage in hydrochloric acid pH 2.1, 5 minutes, 6×/day, 8 days). Microleakage was quantified by stereomicroscopy in enamel and dentin margins after immersion in silver nitrate. Specimens were submitted to shear bond strength testing. Statistical analysis was done by two-way analysis of variance and Kruskal-Wallis tests (p<0.05).

RESULTS

Microleakage in enamel margins was significantly lower in the control group compared with thermal cycling or thermal/erosive cycling. Erosive conditions increased microleakage compared with thermal cycling (significant only for Clearfil SE Bond). No significant differences were observed in dentin margins. Bond strength of enamel specimens was reduced by thermal cycling and thermal/erosive cycling when Clearfil SE Bond was used and only by thermal/erosive cycling when Optibond FL was used. No differences were observed among dentin specimens.

CONCLUSIONS

Thermal/erosive cycling can adversely affect microleakage and shear bond strength of composite resin bonded to enamel.

Effect of Fluoride Varnish Combined with Er:YAG Laser on the Permeability of Eroded Dentin: An In Situ Study

This study evaluated the combined effect of fluoride varnish and Er:YAG laser on the permeability of eroded bovine root dentin. After initial erosive challenge followed by a remineralization period, the specimens were divided in two groups according to the treatment - fluoride varnish and non-fluoride varnish - and were subdivided according to the irradiation protocol: Er:YAG laser (100 mJ, 3 Hz, 12.8 J/cm2per pulse, non-contact and defocus mode) and non-irradiated. After a lead-in period, 7 volunteers wore a palatal device containing 4 specimens that were subjected to erosive challenges. At the first experimental phase, 4 volunteers used specimens treated with fluoride varnish and fluoride varnish+Er:YAG laser and 3 volunteers used specimens treated with non-fluoride varnish and non-fluoride varnish+Er:YAG laser. After a washout period, volunteers were crossed to treatments, characterizing a 2x2 crossover experiment. At the end of the experimental phase, the quantitative response variable was obtained by permeability analysis and the qualitative response by scanning electron microscopy (SEM). Two-way ANOVA and Tukey-Kramer's test revealed that specimens treated with fluoride varnish+Er:YAG laser showed the lowest permeability and a significant difference was found between this group and the others. When varnish (fluoride/non-fluoride) was applied in the absence of Er:YAG laser, higher permeability was found when compared to the laser-treated groups. SEM evaluations showed partially or completely obliterated dentinal tubules when specimens were treated with fluoride varnish+Er:YAG laser. It may be concluded that Er:YAG laser was able to control the permeability of eroded root dentin and the combination with fluoride varnish increased laser action.

Microleakage in Class V Composite Restorations after Desensitizing Surface Treatment with Er:YAG and CO2 Lasers

Aims: Glutaraldehyde, CO₂ and Er:YAG lasers can be used for treatment of dentin hypersensitivity. However, their application may have adverse effects on the clinical service of restorations. This study aimed to assess the microleakage in composite restorations following surface treatment with Glutaraldehyde desensitizer, CO₂ and Er:YAG laser irradiation for treatment of dentin hypersensitivity. Materials and methods: This experimental study was conducted on 60 extracted sound human teeth. Class V cavities were prepared measuring 3×3 mm using a diamond bur. Specimens were randomly divided into 4 groups of 15. Group one:no surface treatment, Group two:applying Glutaraldehyde desensitizer, Groups of three and four were irradiated with CO₂ and Er:YAG lasers, respectively. Surfaces were restored with bonding agent (Single Bond 2, 3M, USA) and Z250 composite (3M, USA). Specimens were thermocycled and immersed in 1% methylene blue solution for 24 hours. Microleakage scores were assessed under a stereomicroscope at ×20 magnification. Data were analyzed using SPSS and the Kruskal Wallis test (P=0.05). Results: There was no significant difference between microleakage of groups in enamel margins (P=0.694). The difference in microleakage at the dentin margin was significant between groups (P=0.018). Conclusions: Application of Glutaraldehyde-desensitizer and CO₂ laser irradiation of surfaces prior to composite restoration do not increase microleakage at the enamel or dentin margins but tooth surface treatment with Er:YAG laser significantly increased the microleakage at the dentin margins.

Effect of Er,Cr:YSGG Laser at Different Output Powers on the Micromorphology and the Bond Property of Non-Carious Sclerotic Dentin to Resin Composites

BACKGROUND

The objective of this study was to investigate the influence of Er,Cr:YSGG laser irradiated at different powers on the micromorphology and the bonding property of non-carious sclerotic dentin to resin composites.

METHODS

Two hundred bovine incisors characterized by non-carious sclerotic dentin were selected, and the seventy-two teeth of which for surface morphological analysis were divided into nine groups according to various treatments (A: the control group, B: only treated with the adhesive Adper Easy One, C: diamond bur polishing followed by Adper Easy One, D-I: Er,Cr:YSGG laser irradiating at 1W, 2W, 3W, 4W, 5W, 6W output power, respectively, followed by Adper Easy One). The surface roughness values were measured by the non-contact three-dimensional morphology scanner, then the surface micromorphologies of surfaces in all groups were assessed by scanning electron microscopy (SEM); meanwhile, Image Pro-Plus 6.0 software was used to measure the relative percentage of open tubules on SEM images. The rest, one hundred twenty-eight teeth for bond strength test, were divided into eight groups according to the different treatments (A: only treated with the adhesive Adper Easy One, B: diamond bur polishing followed by the above adhesive, C-H: Er,Cr:YSGG laser irradiating at 1 W, 2 W, 3 W, 4 W, 5 W, 6 W output power, respectively, followed by the above adhesive), and each group was subsequently divided into two subgroups according to whether aging is performed (immediately tested and after thermocycling). Micro-shear bond strength test was used to evaluate the bond strength.

RESULTS

The 4W laser group showed the highest roughness value (30.84±1.93μm), which was statistically higher than the control group and the diamond bur groups (p<0.05). The mean percentages ((27.8±1.8)%, (28.0±2.2)%, (30.0±1.9)%) of open tubules area in the 4W, 5W, 6W group were higher than other groups (p<0.05). The 4W laser group showed the highest micro-shear bond strength not only in immediately tested (17.60±2.55 PMa) but after thermocycling (14.35±2.08MPa).

CONCLUSION

The Er,Cr:YSGG laser at 4W power can effectively improve the bonding property between non-carious sclerotic dentin and resin composites by increasing the roughness and mean percentage area of open tubules.