Implant and root supported overdentures - a literature review and some data on bone loss in edentulous jaws

Clinical parameters that affect performance and patient satisfaction of root-retained overdentures: A systematic review of randomised controlled clinical trials

OBJECTIVE

To evaluate clinical parameters that affect the performance of root-supported overdentures (ROD) and to identify the possible factors that may affect it.

BACKGROUND

ROD still serve as an alternative and successful treatment plan nowadays for partially edentulous patients. Nonetheless, there is not yet conclusive evidence about their clinical evaluation.

MATERIALS AND METHODS

A search strategy was developed following a PIO (Population, Intervention, Outcome) framework including an electronic search in the following databases: PubMed, Cochrane Library and Scopus. The systematic search included only randomised controlled clinical trials (RCTs), published until January 2023 in English language and was performed by two independent reviewers. Quality assessment of the included studies was conducted according to the Cochrane Risk of Bias tool.

RESULTS

The final selection of studies included 11 RCTs. Clinically relevant variables derived from this search were: Complications, with caries being the most frequently reported, periodontal aspects and bone changes around abutment teeth. Additionally, methods and clinical suggestions for the maintenance of these restorations and patient-related outcomes were assessed. According to the risk of bias assessment, nine studies were considered of high risk, whereas only 2 of low risk. A meta-analysis was not feasible.

CONCLUSION

Within the limitations of this systematic review, ROD remain a viable treatment plan, offering better denture stability and bone preservation around abutment teeth and high patient satisfaction. Thorough oral hygiene and regular follow-ups are of utmost importance. Further well-designed RCTs are necessary for firmer conclusions.

Using an Attachment System with PEEK Matrices for Single-Implant Overdentures: In Vitro Retention Force

Single-implant overdentures (SIOs) represent a major biomechanical challenge in terms of prosthetic retention. The Novaloc attachment system has the potential to overcome those challenges when used for SIOs, due to the use of PEEK matrices. This study compared the retentive force of the Novaloc attachment to the traditional Locator system, before and after cyclic insertion–removal cycles. Three Novaloc matrices (white, yellow, and green, corresponding to low, medium, and high retention, respectively) and Locator (medium retention) were tested, totalling four groups. Retentive force was measured using an Imada force gauge before and after 1095 insertion–removal cycles, corresponding to a year of SIO wearing. Retention was tested with the implants angulated at 0, 10, and 20°. Data for the different groups, angles, and cycling periods were tested via linear regression analysis and two-way ANOVA (α = 0.05). Although the Locator system yielded higher retention forces in general, it lost a much higher percentage of retention with cycling. This trend was similar with the three angles, with forces being inversely proportional to the implant angulation. The authors conclude that Novaloc may provide more reliable retention for SIOs due to their higher resistance to insertion–removal cycling.

Clinical performance of implant supported mandibular overdentures with cantilever bar and stud attachments: A retrospective study

BACKGROUND

Treatment of edentulous patients with implant-supported over-dentures improves denture's retention and stability. Published data concerning implant-supported overdenture with cantilever bars that claimed that can affect the survival and bone loss of implants are scarce.

PURPOSE

The purpose of this study was to evaluate 5-year clinical performance of mandibular implant-supported over-dentures with different attachment systems.

MATERIALS AND METHODS

In this retrospective study, 103 patients who had received mandibular over-dentures supported by two implants were evaluated in a 5-year follow up. Studied groups were patients with Spherblock ball attachment (58 patients), Dolder bar with cantilever (36 patients), and Locator attachment (9 patients). Marginal bone-loss around implants, prosthetic complications, soft tissue status of the implants (gingival index, plaque index, pocket depth, and bleeding on probing) were used to compare studied groups. Visual Analogue Scale (VAS) criteria was used to assay patient's satisfaction. One-way ANOVA, Scheffe, Kruskal-Wallis, Mann-Whitney, and Fisher's exact tests, were used for the data analysis (α = 0.05).

RESULTS

One hundred and three patients (46 male, 57 female, mean age 64.7 ± 8.6) with 206 implants (Strauman) were studied. The implant survival rate was 100% with mean bone loss of 0.22 mm around implants in 5 years. Prosthetic complications including attachment wear and denture fracture occurred more often with ball attachments. The number of attachment replacement, and post insertion appointments were significantly less in patients with bar attachments (p < 0.05). Pocket depth and gingival index were less in the ball attachment (p < 0.05).

CONCLUSION

Mandibular overdenture supported by two implants can be considered a successful treatment in edentulous patients. The frequency of prosthetic complication is higher in unsplinted than splinted superstructures.

Comparing the functional efficiency of tooth-supported overdentures and implant-supported overdentures in patients requiring oral rehabilitation: A systematic review

The aim of this article is to compare the functional efficiency of tooth-supported overdentures and implant-supported overdentures in patients requiring oral rehabilitation. The comparative quantification of the improvement in functional efficiency is very difficult to assess because of the variations in the study designs like the age of the population studied, the male-to-female ratio, the outcome measures used, the clinical setting in which the implant therapy was provided, oral status of the subjects included and the type of implant therapy provided. In this systematic review, the articles included compared the functional efficiency by assessing the bite force, chewing efficiency, electromyographic (EMG) changes measured by EMG analysis, and patient satisfaction for subjects who have been rehabilitated with either a tooth-supported overdenture or an implant-supported overdenture. This will help the clinicians to better plan the treatment, keeping in mind the long-term prognosis for that particular patient.

Comparison of tensile bond strength of ball attachments made of different materials to root canal dentin after chewing simulation

BACKGROUND

Debonding of ball attachments is one of the complications that annoy teeth supported overdenture wearers. The polyetheretherketone (PEEK) and polyetherketoneketone (PEKK) polymers are widely applied in the dental field. The purpose of the current study was to compare the tensile bond strength of ball attachments made of such materials and the commonly used titanium ones after 5 years of overdenture insertion and removal (5000 cycles) in addition to chewing simulation (1,200,000 cycle).

METHODS

Extracted mandibular canines (N = 60) were randomly allocated into three groups and received ball attachments; titanium (group TI; N = 20), PEEK (group PE; N = 20), PEKK (group PK; N = 20). In each group, the samples were divided into two subgroups whereas tensile bond strength was measured pre aging (T0; n = 10) and post aging (T1; n = 10). Tensile bond strength was measured by the Pull out test using the Universal testing machine. Failure mode analysis was determined by examination of the samples' surfaces under 65X stereomicroscope. The resulting data followed normal distribution and the significance level was set at (α = 0.05).

RESULTS

One Way Anova showed statistically significant difference between the three groups (P < .00001). PostHoc Tukey test showed statistically significant difference between the groups TI and PE, TI and PK and no statistically significant difference between the groups PE and PK. Paired t test showed statistically significant difference in the tensile bond strength pre and post aging in each group.

CONCLUSIONS

PEEK and PEKK ball attachments could be concluded to have a higher tensile bond strength compared to the titanium ones when bonded to root dentin. Tensile bond strength of such attachments may decrease with aging as well. Clinically, the higher tensile bond strength may have a lesser rate of debonding and thus reduced patient apprehension.

Comparative clinical study of conventional dental implant and mini dental implant-retained mandibular overdenture: A 5- to 8-Year prospective clinical outcomes in a previous randomized clinical trial

AIM

To compare the long-term prospective clinical outcomes in a previous randomized controlled clinical trial (RCT) of 2 Mini Dental Implant (2MDI), 4 Mini Dental Implant (4MDI), and 2 Conventional Dental Implant (2CDI)-retained mandibular overdenture with follow-up between 5 to 8 years.

MATERIALS AND METHODS

Thirty-seven patients formerly participated in the Comparative Clinical Study of CDI and MDI for Mandibular Overdenture were requested for examination of clinical outcomes. A total of 104 implants were placed with mean follow-up periods 6.64 ± 0.60 years. In Group 1 (2MDI) and Group 2 (4MDI), implants were placed and immediately loaded with Equator® attachments to retained mandibular overdenture. In Group 3 (2CDI), implants were placed and delayed 3 months for denture loading with ball attachment. The success rate, survival rate, clinical implant performance scale (CIP scale), peri-implant tissue status, prosthetic complication, implant stability quotient (ISQ), marginal bone level change (MBLC), and patient satisfactions were analyzed.

RESULTS

After 5 to 8 years follow-up, the success rate in Groups 1, 2, and 3 were 90.91%, 93.33%, and 54.55%, respectively. The success rate in Group 3 was significantly lesser than Group 1 (p = 0.016) and Group 2 (p < 0.001). The survival rate in Groups 1, 2, and 3 was 100%, 96.67%, and 90.91%, respectively, and showed no significant differences. Mean ISQ reported no significant differences between groups. Mean MBLC were 0.57 ± 1.19 mm, 0.68 ± 0.90 mm, and 1.55 ± 1.60 mm in Groups 1, 2, and 3, respectively. Group 3 reported significantly greater mean MBLC than Group 1 (p = 0.016) and Group 2 (p = 0.011), but Groups 1 and 2 were not significantly differences. The overall patient satisfactions were reported as not significant differences between groups.

CONCLUDE

Two MDI-retained mandibular overdentures with immediate loaded protocol performed had favorable clinical outcomes, cost effectiveness, and overall patient satisfactions after 5 to 8 years follow-up.

Adaptation to New Dentures and 5 Years of Clinical Use: A Comparison between Complete Denture and Mini-implant Mandibular Overdenture Patients based on Oral Health-Related Quality of Life (OHRQoL) and Orofacial Esthetics

Objective of work

It is unclear how long patients need to adapt to new dentures. This study assessed adaptation and five years of clinical use, comparing complete denture wearers (CDs) and mini-implant mandibular overdenture wearers opposing a maxillary CD (MDI-OD), based on oral health reported quality of life (OHRQoL) and orofacial esthetics (OES).

Material and Methods

A total of 36 subjects in the CD group (25 females) and 30 subjects in the MDI group (20 females) completed the 5-year study. All patients received new CDs, but in the MDI-OD group, four mini-implants were inserted interforaminally in the mandible before denture manufacture. Participants filled in the OHIP-EDENT and OES questionnaires one day after dentures’ delivery, on the 3^rd, 8^th, 15^th, 30^th day, and at the 1-, 3- and 5-year follow-up examinations. Statistical analysis comprised descriptive methods, X² test, independent t-test, Friedman, and Mann-Whitney test.

Results and Conclusions

Both groups' adaptation to new dentures was completed within a month. The MDI-OD group had significantly better OHRQoL in all follow-ups except for the 3^rd and 8^th day, probably due to soreness and pain, the reason why the MDI-OD group had limitation in functioning in the first days after new dentures’ delivery. Already after the third year and at the fifth year, OHRQoL worsened (p<0.01) in both groups. However it was significantly more pronounced in the conventional CD wearers (p<0.01) than in the MDI-OD group. Orofacial esthetics was highly scored in both groups. The scores dropped down only after three years, equally in both groups.

Keywords

OHRQoL, OES, prospective study, complete dentures, mini-implants, adaptation

MeSH Terms

Complete Dentures; Dental Implants; Quality of Life; Dental Esthetics

Effects of conventional complete dentures and implant-supported overdentures on alveolar ridge height and mandibular bone structure: 2-year and 6-year follow-up study

OBJECTIVES

The aim of this study was to compare the changes in mandibular bone structure in edentulous patients who were rehabilitated with conventional complete dentures (CCD) and implant supported overdentures (ISO), by evaluating alveolar bone loss (ABL), panoramic mandibular index (PMI), mandibular cortical width (MCW), gonion index (GI), antegonial index (AI), and articular eminence inclination (AEI).

MATERIALS AND METHODS

Panoramic radiographs of 63 edentulous patients using CCD, 63 edentulous patients using ISO, and 126 patients without tooth loss were evaluated. Edentulous patients had a 2-year and 6-year follow-up panoramic radiograph image. ABL (anterior, premolar, and molar regions), MCW, PMI, AI, GI, and AEI were measured in each patient. Variation between measurements was analyzed using repeated measures ANOVA test and post hoc Tukey test.

RESULTS

Both edentulous groups showed significantly lower mean than without tooth lost group in all measures (p < 0.000). ISO group showed significantly lower mean ABL than CCD group in anterior (p = 0.000), right premolar (p = 0.005), left premolar (p = 0.005), right molar (p < 0.000), and left premolar (p < 0.000) regions in short term. ISO group showed significantly lower mean ABL than CCD group in anterior (p = 0.021), right molar (p < 0.000), and left premolar (p < 0.000) regions in long-term. There is no statistically significant difference between the CCD and ISO groups in right premolar (p = 0.200) and left premolar (p = 0.134) regions in long term. Both edentulous groups showed significantly lower mean MCW (p < 0.000), PMI (p < 0.000), AI (p < 0.000), GI (p < 0.012), and AEI (p < 0.002) than the without tooth loss group. There is no statistically significant difference between the CCD and ISO groups in terms of changes in the mean MCW, PMI, AI, GI, and AEI measurement in short and long term (p > 0.000).

CONCLUSIONS

In the short and long term, edentulism reduced alveolar crest height, MCW, and AEI in individuals, but had no effect on PMI, AI, or GI. The use of prosthesis did not prevent the decrease of alveolar crest height, MCW, or AEI (CCP or ISO). In the short and long term, however, ISO created less ABL in the mandibular anterior and molar regions than CCD.

CLINICAL RELEVANCE

ABL cannot be halted in edentulous people, but by using ISO instead of CCD for rehabilitation, resorption can be reduced.

Comparative Stress Analysis of Polyetherketoneketone (PEKK) Telescopic Crowns Supported by Different Primary Crown Materials

The present study aimed to investigate the stress distribution of secondary telescopic crowns made of polyetherketoneketone (PEKK) combined with different primary crown (PC) materials (Zirconia, CoCr, Titanium, and PEKK) using finite element analysis. The geometric model was composed of bone tissue, periodontal ligament, root dentin, cement layer, primary crown, and secondary telescopic crown (SC). A total of four models were evaluated in which the secondary crowns were simulated in PEKK. The models were designed in CAD software and exported to the computer aided engineering software for the statistic structural analysis simulation. The materials were considered isotropic, with linear behavior and elastic properties. The model was fixed in the bone base and the load was applied at the occlusal surface of the crowns with 600 N. The results were required in von-Mises stress for the primary crown, secondary crown, cement layer, and Equivalent Strain to the periodontal ligament and bone tissue. Results show that the material influenced the stress distribution. The higher the PC elastic modulus, the higher the stress magnitude on the SC and cement layer. In the present study, the use of milled high-density polymer for primary crown presented a promising biomechanical behavior as an alternative material for double-crown design.

Mandibular Overdenture Retained by Telescopic Crowns and Ball Attachments on Semierupted Premolars

This clinical report describes the oral rehabilitation with a mandibular overdenture retained by telescopic crowns and ball attachments on semierupted permanent teeth with a 5-year follow-up. A female patient used an old complete denture in the maxilla and was willing to extract her remaining mandibular teeth to have new dentures. The treatment included preservation of semierupted premolars because of the high surgical risk for mandibular fracture and paresthesia, a new maxillary complete denture, and a mandibular overdenture supported by combined telescopic crowns and ball attachments. The prosthetic rehabilitation restored function and esthetics with high patient satisfaction after 5 years in function.

Do ball-type attachment systems for overdenture result in better patient-satisfaction? A systematic review of randomized crossover clinical trial

Objective

This review is to compare patient-satisfaction with ball-type overdenture attachment systems with others attachment systems.

Material and methods

This study was registered in PROSPERO (CRD42018097234) and adheres the PRISMA guidelines. Electronic searches on PubMed/MEDLINE, Scopus, Cochrane, and Web of Science databases for published articles were performed before October 2020. The PICO question was: “Do patients with a ball-type overdenture retention system have greater satisfaction, when compared to other attachment systems?” The evaluation of risk of bias was performed using the Cochrane risk of bias tool.

Results

After searching the databases, seven articles were selected out of a total of 2583. A total of 312 implants were placed in 139 patients, with a mean age of 65.9 years. The risk of bias in the included studies varied according to the different domains in a risk of uncertain bias or low bias risk. No difference was found between the ball attachment systems and the others systems, with respect to patient-satisfaction. The meta-analysis revealed no statistically significant difference between the ball systems and another systems (P = 0.11; MD: 10.90; 95% CI: −2.55 to 24.35).

Conclusions

Regarding patient general satisfaction, it was not possible to determine differences between the ball system and another types of attachment system for overdenture. The ball-type system was statistically superior only to the magnet system.

Endoplasmic reticulum stress remodels alveolar bone formation after tooth extraction

Bone healing in tooth extraction sockets occurs in a complex environment containing saliva and many microorganisms and is affected by many factors. Endoplasmic reticulum (ER) stress affects bone metabolism, but the role of ER stress in bone healing after tooth extraction remains unclear. We utilized a rat tooth extraction model, in which we promoted wound healing by using salubrinal to regulate the ER stress response. Western blot analysis showed increased expression of p‐eIF2α/eIF2α, Runx2 and alkaline phosphatase (ALP) in bone tissue, and histological assays showed irregularly arranged and new bone with more collagen fibres 14 days after tooth extraction and after modulating the degree of ER stress. Micro‐CT showed that modulating ER stress to an appropriate degree increases bone filling in regards to the density in the bottom and the surrounding bone wall of the tooth extraction wounds. Transmission electron microscopy showed rough ER expansion and newly formed collagen fibrils in osteoblasts after modulating ER stress to an appropriate degree. We also used different concentrations of salubrinal to evaluate the resistance to tunicamycin‐induced ER stress in an osteogenic induction environment. Salubrinal restored the tunicamycin‐induced decrease in the viability of primary calvarial osteoblasts and increased the expression of Runx2 and ALP, and decreased p‐eIF2α/eIF2α in a dose‐dependent manner. Taken together, the results demonstrate that ER stress occurred after tooth extraction, and regulating the degree of ER stress can promote bone healing in tooth extraction sockets, providing clinical evidence for bone healing.

Retentive Characteristics of a Polyetheretherketone Post-Core Restoration with Polyvinylsiloxane Attachments

A new application of a polyetheretherketone (PEEK) post-core restoration combined with polyvinylsiloxane (PVS) attachments was proposed and substantiated. This study aimed to evaluate retentive characteristics of the PEEK post-core restoration with PVS attachment systems. Specimens with PVS attachments were fabricated to evaluate retention force during 10,000 cyclic dislodgements. Additionally, the retention forces of PVS attachments with three different values of Shore hardness were further measured before and after aging treatments. The results of cyclic dislodgement test indicated a strong negative linear relationship between the cyclic times and retention force (p < 0.0001, r = −0.957). Furthermore, the retention forces of the PVS were significantly improved with Shore hardness increased, which was also affected by the aging treatment (F (2, 138) = 10.95, p < 0.0001). Therefore, the PEEK post-core restoration with PVS attachments exhibited the favorable retention force, which could be a promising alternative for dental prostheses.

Survival rate and clinical evaluation of the implants in implant assisted removable partial dentures: surveyed crown and overdenture

PURPOSE

The purpose of this study was to investigate survival rates of the implants used in implant assisted removable partial dentures (IARPDs).

MATERIALS AND METHODS

The study was conducted on 21 patients who were treated with IARPDs. The mean follow-up period for IARPD patients ranged from 12 to 185 months (mean 47.9 months). A total of 58 implants were used for IARPDs in two different modalities: 41 for surveyed crowns and 17 for overdentures. The survival of implants was determined by clinical and radiographic evaluations considering relevant factors: location, RPD classification, opposing dentition, splinting, and implant diameter.

RESULTS

The survival rate of total 58 implants was 93.1%: 95.1% for implants supporting surveyed crowns and 88.2% for implants used in overdentures. Considering only the implants supporting surveyed crown, regular diameter implants showed a higher survival rate than narrow or wide diameter implants.

CONCLUSION

The survival rate of the implants used in IARPDs was 93.1% (surveyed crown: 95.1%, overdenture: 88.2%).

Root-retained overdentures: Survival of abutment teeth with precision attachments on root caps depends on overdenture design

BACKGROUND

Root-retained overdentures (OD) are one treatment option for partially edentulous patients. However, the available evidence regarding factors influencing abutment survival in root-retained ODs is limited.

PURPOSE

This retrospective study included clinical examinations and evaluated the survival rate of roots restored with precision attachments soldered to post-and-core (gold cap) retained ODs, analysed with respect to various patient- and prosthesis-related factors.

METHODS

Patients receiving at least one OD with gold caps in the past were invited for comprehensive clinical examinations. The primary outcome parameter was the abutment survival rate over the observation period (2002-2016). Possible contributing factors (eg closed vs open OD design) were analysed. Analyses included Kaplan-Meier estimators, Cox regressions and hazard ratios (HR).

RESULTS

114 patients with 128 ODs originally retained by 280 abutments, with a cumulative total exposure time of 2035.4 years, were examined. Twenty-seven abutment teeth (9.6%) were lost after a mean observation period of 7.9 ± 3.4 years. Significant factors associated with abutment loss were a closed, compared to an open OD design (HR 8.38 (95% CI 1.11-63.59), P = .040), which was independent of the number of abutments per OD. Furthermore, the loss rate was higher when the denture was not worn day-and-night (HR 3.52 (95% CI 1.32-9.40), P = .012). Oral hygiene behaviour was associated with higher HRs.

CONCLUSIONS

ODs remain a viable treatment option for patients with few teeth remaining in the dental arch. It is advisable to choose an open design for the OD, irrespective of the number of abutment teeth. Furthermore, gold cap-retained ODs should not be removed overnight.

Prosthetic reconstruction of a patient with an irradiated total rhinectomy with navigated surgical placement of a single zygomatic implant: A clinical report

This clinical report details the rehabilitation of a patient who underwent a total rhinectomy, subsequent adjuvant radiation therapy, and eventual prosthetic rehabilitation but then developed an empirically diagnosed medical adhesive intolerance. With the aid of digital planning and real time navigation, 2 zygomatic implants were placed by using a flapless surgical approach followed by early delivery of an interim prosthesis. In spite of the failure of 1 craniofacial implant, definitive restoration was accomplished by using a titanium bar, double magnetic attachments, and a new silicone prosthesis.

Management of Edentulous Patients

Edentulism, defined as the complete loss of all dentition, is a worldwide phenomenon. Edentulism occurs because of biologic disease processes, such as dental caries, periodontal diseases, trauma, and oral cancer. Edentulism is accompanied by several comorbidities that can significantly influence an individual. Although the rate of edentulism is declining, the number of edentulous patients continues to rise because of the increase in population. The management of edentulous patient has been addressed since the early days of dentistry. This article describes complete dentures and their maintenance, and advanced technology in complete dentures, and in implant-retained and implant-supported prosthesis.

Rehabilitation of an Extremely Resorbed Edentulous Mandible by Short and Narrow Dental Implants

Serious consequences of long-term complete denture wearing may be extreme residual ridge atrophy and a reduced area of keratinized oral mucosa of a denture-bearing area. This paper presents five clinical cases of extreme mandibular ridge atrophy, rehabilitated by means of mandibular overdentures retained by short mini dental implants. The patients had a reduced mandibular bone volume in the interforaminal region, bone height less than 10 mm, and buccolingual bone width less than 4 mm. In order to avoid bone augmentation, patients received four short mini dental implants (MDIs) (6 or 8 mm long; 2.0 or 2.5 mm wide) for the support of mandibular overdentures, which is a new rehabilitation option. After insertion, the MDIs were early loaded with new mandibular overdentures reinforced with the CoCr framework. The patients have been wearing their overdentures for 2 years. One MDI broke during insertion and a new one was added. One patient lost one MDI but successfully continued to wear the overdenture retained by the remaining three MDIs. Mean marginal bone loss (MBL) was 0.20 ± 0.19 mm. Patients significantly improved their OHRQoL and chewing function by reducing the summary scores of the OHIP-14 and the chewing function questionnaires. The improvements remained unchanged throughout the observation period.

Loss of natural abutment teeth with cast copings retaining overdentures: a systematic review and meta-analysis

PURPOSE

To analyze the available evidence in the English, German and Japanese literature on the survival and complications of natural teeth with cast copings used to retain overdentures (ROD).

STUDY SELECTION

A systematic search strategy was conducted using MeSH terms and pre-defined criteria. Two groups of researchers searched Pubmed, CENTRAL, Embase (English, German), Ichushi-web (Japanese) as well as hand searching. Data were extracted independently by the two groups. The estimated frequency of abutment tooth loss was calculated from data on the number of lost teeth and exposure time. A meta-analysis was conducted to estimate the annual frequency of abutment tooth loss across all included studies.

RESULTS

A total of 4791 eligible studies from PubMed, Embase, and CENTRAL. An additional 316 articles were identified from the Ichushi-Web plus another 131 articles from additional sources. From those manuscripts, 19 reported relevant outcome data that was then extracted. The pooled data included a total of 1954 abutment teeth with a combined total exposure time of 9098 years. The estimated linear rate of loss was 1.76 %/year (95 %CI 1.13; 2.72). Caries and periodontal infections were identified as the most common reasons for abutment tooth loss.

CONCLUSIONS

Natural tooth retained overdentures often constitute the last resort before edentulism and might aid in this transition, especially in very old patients with reduced adaptive capacities. Given correct design, preparation and aftercare, RODs with cast copings, still are a valid treatment option in partially edentulous patients.

Impact of crestal bone resorption on quality of life and professional maintenance with conventional dentures or Locator-retained mandibular implant overdentures

STATEMENT OF PROBLEM

The influence of the mandibular resorption profile on clinical outcome after converting a conventional complete denture into a Locator-retained implant overdenture is unknown.

PURPOSE

The purpose of this prospective study was to assess the oral health-related quality of life (OHRQoL) and prosthetic maintenance of mandibular overdentures on 2 Locator abutments in relation to the resorption degree of the edentulous mandible.

MATERIAL AND METHODS

Twenty-five participants were treated and classified according to the Cawood and Howell (CAW-H) resorption classification for the resorption profile of the mandible, CAW-H group III-IV (n=14) and CAW-H group V (n=11). Participants received conventional complete dentures (CDs) before implant placement and immediate nonfunctional loading on Locators with a resilient liner. After 3 months, the attachments were functionally activated. Assessments were made using the Oral Health Impact Profile 14 (OHIP-14) questionnaires with existing CDs and new CDs at 1, 3, and 15 months after loading. Prosthetic maintenance (repairs, rebasings, replacement of retention parts) and biological prosthetic aftercare were assessed. For comparison between groups, the Kruskal-Wallis and Mann-Whitney U tests were applied for continuous and ordinal variables and the chi-square test for cross-tabulations. To analyze repeated OHIP-14 scores, the Friedman test was used for ordered alternatives to test whether the measurements differed (overall significance level α=.05). Then the Wilcoxon signed rank test was conducted to detect specific differences (α=.05).

RESULTS

OHIP-14 scores decreased significantly after implant placement and functional connection for the whole population (P<.001) and for both sub groups, the CAW-H group III-IV (P<.001) and the CAW-H group V (P=.013). CAW-H group V participants needed more retention inserts than CAW-H group III-IV participants (26 versus 3, respectively; P=.006). The incidence of repair and rebasing was limited for both groups, and biological aftercare and pain relief were comparable.

CONCLUSIONS

Changing a CD to an overdenture significantly improved ORLQoL regardless of the resorption degree, but heavily resorbed mandibles require more replacements of retention inserts.

Single-implant overdentures retained by the Novaloc attachment system: study protocol for a mixed-methods randomized cross-over trial

BACKGROUND

Overdentures retained by a single implant in the midline have arisen as a minimal implant treatment for edentulous mandibles. The success of this treatment depends on the performance of a single stud attachment that is susceptible to wear-related retention loss. Recently developed biomaterials used in attachments may result in better performance of the overdentures, offering minimal retention loss and greater patient satisfaction. These biomaterials include resistant polymeric matrixes and amorphous diamond-like carbon applied on metallic components. The objective of this explanatory mixed-methods study is to compare Novaloc, a novel attachment system with such characteristics, to a traditional alternative for single implants in the mandible of edentate elderly patients.

METHODS/DESIGN

We will carry out a randomized cross-over clinical trial comparing Novaloc attachments to Locators for single-implant mandibular overdentures in edentate elderly individuals. Participants will be followed for three months with each attachment type; patient-based, clinical, and economic outcomes will be gathered. A sample of 26 participants is estimated to be required to detect clinically relevant differences in terms of the primary outcome (patient ratings of general satisfaction). Participants will choose which attachment they wish to keep, then be interviewed about their experiences and preferences with a single implant prosthesis and with the two attachments. Data from the quantitative and qualitative assessments will be integrated through a mixed-methods explanatory strategy. A last quantitative assessment will take place after 12 months with the preferred attachment; this latter assessment will enable measurement of the attachments' long-term wear and maintenance requirements.

DISCUSSION

Our results will lead to evidence-based recommendations regarding these systems, guiding providers and patients when making decisions on which attachment systems and implant numbers will be most appropriate for individual cases. The recommendation of a specific attachment for elderly edentulous patients may combine positive outcomes from patient perspectives with low cost, good maintenance, and minimal invasiveness.

TRIAL REGISTRATION

ClinicalTrials.gov, NCT03126942 . Registered on 13 April 2017.

Implant retention systems for implant-retained overdentures

Implant retained overdentures are being increasingly utilised in both general and specialist practice to rehabilitate patients with missing teeth, particularly those that are edentate. This article aims to inform the reader of a variety of retention systems that are available to retain an implant overdenture and to understand how these systems work, their advantages and disadvantages and to outline some of the clinical and treatment planning considerations involved in selecting the most appropriate retention system for patients.

Telescopic Denture

Aim:

This article explains the concept of telescopic denture.

Procedure:

It describes the different types of telescopic attachment (or double crown), and provides an overview of the advantages and the disadvantages of this type of prosthodontic treatment.

Conclusion:

The indications and the clinical applications of telescopic denture are discussed.

Effect of implant- and occlusal load location on stress distribution in Locator attachments of mandibular overdenture. A finite element study

PURPOSE

The aim of this study is to evaluate and compare the stress distribution in Locator attachments in mandibular two-implant overdentures according to implant locations and different loading conditions.

MATERIALS AND METHODS

Four three-dimensional finite element models were created, simulating two osseointegrated implants in the mandible to support two Locator attachments and an overdenture. The models simulated an overdenture with implants located in the position of the level of lateral incisors, canines, second premolars, and crossed implant. A 150 N vertical unilateral and bilateral load was applied at different locations and 40 N was also applied when combined with anterior load at the midline. Data for von Mises stresses in the abutment (matrix) of the attachment and the plastic insert (patrix) of the attachment were produced numerically, color-coded, and compared between the models for attachments and loading conditions.

RESULTS

Regardless of the load, the greatest stress values were recorded in the overdenture attachments with implants at lateral incisor locations. In all models and load conditions, the attachment abutment (matrix) withstood a much greater stress than the insert plastic (patrix). Regardless of the model, when a unilateral load was applied, the load side Locator attachments recorded a much higher stress compared to the contralateral side. However, with load bilateral posterior alone or combined at midline load, the stress distribution was more symmetrical. The stress is distributed primarily in the occlusal and lateral surface of the insert plastic patrix and threadless area of the abutment (matrix).

CONCLUSION

The overdenture model with lateral incisor level implants is the worst design in terms of biomechanical environment for the attachment components. The bilateral load in general favors a more uniform stress distribution in both attachments compared to a much greater stress registered with unilateral load in the load side attachments. Regardless of the implant positions and the occlusal load application site, the stress transferred to the insert plastic is much lower than that registered in the abutment.

Custom Cast Ball Attachments Used on Outdated Implants to Restore a Maxillary Implant-Supported Overdenture

The lack of compatible prosthetic components can be a complication during oral rehabilitation using outdated implants. The aim of the present clinical report was to describe an alternative technique for the fabrication of a maxillary implant-supported overdenture in a patient with 20-year-old dental implants using castable spherical patterns and ball attachments. The patient had been wearing a relined bar/clip overdenture in the mandible on 4 external-hexagon dental implants and a relined complete denture in the maxilla on 4 internal-hexagon implants due to abutment screw fracture inside of the implants, losing the attachment system. The remaining maxillary dental implants did not possess attachments compatible with current systems due to configuration changes by the manufacturer in the dental implant's platform and the components over time. Therefore, castable spherical patterns and cast ball attachments were used to fabricate a maxillary implant-supported overdenture. The mandible rehabilitation was performed using 4 osseointegrated dental implants with a fixed implant-supported prosthesis. The use of cast ball attachments on the maxillary dental implants avoided invasive procedures on the remaining implants. Considering the lack of available compatible prosthetic components for the osseointegrated implants, this technique was considered a viable and satisfactory treatment option.

Teaching mandibular implant-Supported overdentures in dental schools in North America - a survey

INTRODUCTION

Mandibular two-implant overdentures are considered the minimum standard of care for edentulous patients and provide an excellent performance, as well as satisfaction to the patients. Dental schools are required to promote the teaching of current treatment options in order to enable students to master state-of-the-art procedures.

AIMS

The purpose of this study was to examine how the theoretical and practical aspects of mandibular two-implant overdentures are taught in dental schools in North America.

METHODS

Data were collected via an online questionnaire that included questions regarding the theoretical and clinical courses, surgical procedure and imaging method.

RESULTS

Of 75 schools, 36 responded to the survey. Almost all the schools teach the subject theoretically, but it is not mandatory for students to perform in most of the schools. Only a minority (23%) of the mandibular dentures made by students are implant-supported. Almost all of the schools (94%) use two implants to support overdentures, and Locator abutment is used almost exclusively. The prevalent imaging for the surgical procedure is CT scans, although 30% of the schools use panoramic radiograph. None of the schools loads the implants immediately after surgery.

CONCLUSION

Some clear trends are apparent in the current survey: the use of two implants, no use of bar connectors and delayed loading of the implants. It is likely that graduates will not have sufficient clinical skills and will need continuing education to be familiar with the required procedures, both surgical and prosthetic.

An International Survey among Prosthodontists of the Use of Mandibular Implant-Supported Dental Prostheses

PURPOSE

To evaluate the use of implant-supported overdentures (IOD) and implant-supported fixed dental prostheses (IFDP) in patients with edentulous mandibles among international prosthodontists.

MATERIALS AND METHODS

A questionnaire was sent by e-mail to all clinically active prosthodontists in the International College of Prosthodontists with questions related to implant treatment of the edentulous mandible performed in 2015.

RESULTS

One hundred and sixteen prosthodontists from 33 countries responded to the questionnaire. The vast majority of the responding prosthodontists was faculty or worked in private practice, and the great majority had performed treatment with mandibular implant-supported dental prostheses; however, two thirds of the respondents reported that <20% of the implant patients in their clinic had received treatment related to edentulous mandibles. The majority reported using 2 implants (84%), while 13% used 4 for overdenture retention. There were great variations regarding retention systems used for mandibular IODs; the most common was individual Locator attachments. Cost was considered the most common reason to choose mandibular IOD, There was a wide variation of materials used for mandibular IFDPs. The most common combination included milled titanium frameworks and acrylic resin teeth.

CONCLUSIONS

This survey, completed by 116 prosthodontists from 33 countries, showed that implant treatment for edentulous mandibles is common, but there was great variation among the respondents regarding amount of treatments performed, design, and materials used for the implant prostheses.

Can stem cells enhance bone formation in the human edentulous alveolar ridge? A systematic review and meta-analysis

Several non-biological materials are currently being used to increase the alveolar bone volume to support dental implants. Recently, stem cell therapy has emerged as a promising biological substitute or adjuvant to enhance bone healing. In order to determine if stem cell therapy has enough clinical evidence to bone ridge augmentation in humans, a systematic review and meta-analysis were conducted. Two independent investigators searched the Entrez PubMed, SCOPUS and Web of Science databases for eligible randomized clinical trials that describe stem cell therapies for alveolar bone formation. The included studies were evaluated for risk of bias. A random-effects meta-analysis model was used to evaluate the percentage of bone formation in the selected studies. Heterogeneity was evaluated using the Cochrane Chi ² and I ². Nine eligible trials were included. These studies presented an overall unclear risk of bias. A comparison between the lower heterogeneity studies and the long term observational outcomes showed a slight tendency to enhance bone formation. High heterogeneity between the included studies was observed. The lack of outcome standardization made a wide-ranging comparison difficult. The application of stem cells in oral surgery and implantology appears to be promising although more standardized study designs, increased samples and long-term observations are needed to strength the clinical evidence that stem cell therapy is effective for alveolar bone formation.

To what extent residual alveolar ridge can be preserved by implant? A systematic review

Background

It has been reported that the load for (or to) implant-supported restoration may lead to bone remodeling as bone resorption and/or formation. While many authors supported the process of bone resorption, others elaborated bone apposition and increasing bone density close and remote to implant body (or fixture). This may suggest the role of the implant to reserve alveolar ridge from physiologic/pathologic resorption. The aim of this systematic review was to predict to how extend dental implants can preserve the residual alveolar ridge based on previous clinical investigations.

Methods

This systematic review based on the retrospective and prospective studies, randomized clinical trial, and case reports. The process of searching for proposed articles included PubMed, Ovid, and Web of Science databases, with specific inclusion and exclusion criterion.

Results

A total 2139 citations were identified. After expunging the repeated articles between databases and application of exclusion and inclusion criteria, 18 articles were found to meet the topic of this systematic review. Many of the articles reported bone preservation with implant-assisted restorations, and the rest denoted noticeable bone apposition.

Conclusion

According to the published clinical studies, the behavior of bone remodeling around implant predicts a sort of residual alveolar bone preservation.

Implant-based overdenture: A review in patient perspective

A review in affected person's attitude in abstract care of edentulous patients has to be a priority in elderly individuals. The development of complete dentures (CDs) has been the selection of remedy retaining in mind the socioeconomic popularity, age, and nutritional elements. However, most of the patients complain of loss of retention in mandibular implant-supported overdentures (ODs), which compensated the downside of the loss of retention in complete dentures (CDs). Moreover, implant supported over dentures (ISOVDs) supplied accurate exceptional of lifestyles, esthetics, progressed nutritional deficiencies, and provided good patient satisfaction. The place of dental implants and desire of retentive attachments for implant supported mandibular over dentures (ISOVD) are selected on clinician preference and professional opinion. This text offers a fundamental statistics regarding implant placement, mode of treatment to be selected, and patient care. Two implants provide extraordinary long-term achievement and survival with improved oral capabilities. Single midline implant OD is costly, powerful, and may be a promising alternative. In maxilla, 4–6 implants splinted with bar have located to give true results.

Rehabilitation with implant-retained removable dentures and its effects on perioral aesthetics: a prospective cohort study

Background

The onset of perioral wrinkles often prompts patients to request treatment. This aesthetic deterioration linked to aging may be associated with tooth and alveolar bone loss in fully edentulous patients.

Purpose

To evaluate perioral wrinkles before and after maxillary and mandibular rehabilitation with implant-retained dentures in fully edentulous patients.

Methods

In this prospective cohort, single-center, blinded study, patients requiring maxillary and mandibular rehabilitation with implant-retained dentures were enrolled. The patients were photographed in the same position before and after oral rehabilitation. Wrinkles were evaluated in the photographs by blinded observers using validated rating scales. The following parameters were analyzed: upper and lower radial lip lines, marionette lines, upper and lower lip fullness, nasolabial folds, corner of the mouth lines, and the labiomental crease. Statistical analysis was performed using the Wilcoxon signed ranks test for paired data, with P<0.05 considered significant.

Results

Upper and lower implant-retained dentures were applied in 31 patients (15 males; mean ± standard deviation age 62.13±8.69 years, range 47–77 years). The oral rehabilitation procedures significantly improved (P<0.05) the upper and lower radial lip lines, marionette lines, upper and lower lip fullness, the nasolabial folds, and the corner of the mouth lines.

Conclusion

Maxillary and mandibular rehabilitation with implant-retained dentures in fully edentulous patients improves perioral aesthetics. Patients requiring oral rehabilitation and desiring perioral aesthetic improvement could benefit from treatment with this type of prosthesis.

Some issues related to evidence-based implantology

This article reviews relevant dental literature to answer some frequent questions related to evidence-based implantology. There are hundreds of implant systems on the market, but the majority lack clinical documentation. Recommended number of implants for full-arch fixed prostheses is four or five in the mandible but at least six in the maxilla. Less expensive implant-retained overdentures make implant treatment available to a greater portion of edentulous subjects. Mandibular overdentures on two implants, and even one implant, have shown excellent long-term outcomes. In the maxilla, less than four implants are not recommended for good results. Single implant restorations have good prognosis, but placement of the implant should be postponed until adulthood. Osseointegrated implants have revolutionized clinical dentistry. However, in a global perspective, implants make up only a small part of all prosthodontic treatment. Knowledge and skill in conventional prosthodontics must be maintained as it will remain the most common part of the specialty.

Telescopic Partial Dentures-Concealed Technology

The ideal goal of good dentist is to restore the missing part of oral structure, phonetics, his look and the most important is restored the normal health of the patient, which is hampered due to less or insufficient intake of food. Removable partial denture (RPD) treatment option is considered as a notion, which precludes the inevitability of "floating plastic" in edentulous mouth, that many times fail to fulfill the above essential of the patients. In modern dentistry, though the dental implants or fixed partial denture is the better options, but they have certain limitations. However, overdentures and particularly telescopic denture is the overlooked technology in dentistry that would be a boon for such needy patients. Telescopic denture is especially indicated in the distal edentulous area with minimum two teeth bilaterally present with a good amount of periodontal support. This treatment modality is sort of preventive prosthodontics remedy, which in a conservative manner preserve the remaining teeth and helps in conservation of alveolar bone ultimately. There are two tenets related to this option, one is constant conservation edentulous ridge around the retained tooth and the most important is the endless existence of periodontal sensory action that directs and monitor gnathodynamic task. In this option the primary coping or inner coping are cemented on the prepared tooth, and a similar removable outer or inner telescopic crown placed tightly by using a mechanism of tenso-friction, this is firmly attached to a removable RPD in place without moving or rocking of the prosthesis, which is the common compliant of almost all patients of RPD. Copings are also protecting the abutment from tooth decay and also offers stabilization and maintaining of the outer crown. The outer crown engages the inner coping and gives as an anchor for the remainder of the dentition. This work is the review of telescopic prosthesis which is well supported by the case discussion, and designates the utilization of favorable retained tooth/teeth as abutment that drastically minimized alveolar bone resorption beneath the prosthesis and give the maximum tactile sensation of natural teeth to the patient, which is not possible with other type of RPD.

Functional Impressions in Complete Denture and Overdenture Treatment

Tooth loss can cause loss of occlusal, masticatory, esthetic, physiognomic, phonetic and psychosocial function of patients. The most frequently used treatment method of completely edentulous patients and patients with a small number of remaining teeth are complete dentures or overdentures. One of the most important clinical and laboratory procedures in their fabrication is functional impression taking. The aim of this paper was to present procedures of taking functional impressions in fabrication of complete dentures and overdentures, using standardized techniques and materials. An accurate functional impression together with other correctly performed clinical and laboratory procedures ensure good retention and stability of dentures, which is a precondition for restoring patients' lost functions.

Therapeutical attitudes in tooth supported overdentures with ball attachements. Case report

Tooth supported overdenture with ball attachments has a number of advantages in prosthetics, but presents some difficulties as well, which sometimes make impossible the use of these anchoring systems; these difficulties should be well known. In this regard we present a suggestive case. It is the case of a patient, aged 57, who came for treatment, suffering from subtotal maxillary and mandibular edentulism (present 11 and 21, respectively 33 and 43), previously having an overdenture prosthesis on natural teeth, with special systems - ball attachment type, dissatisfied with the treatment (due to repeated fractures and functional intolerance to dentures). Clinical examination revealed an increase of the vertical dimension of occlusion and reduced prosthetic space at a correct, functional DVO value, aspects that were explaining the patient's reported complaints. As a therapeutic approach, having into consideration the balance conditions that were favorable for complete dentures and the large ball attachments volume, which did not allow keeping them at a functional DVO at any of the jaws, and the relatively young age of the patient, it was decided to remove the ball attachments and to keep the teeth for a simple overdenture, both to the maxillar and the mandible, over coronary reduced teeth, enough to allow the denture thickness at a functional DVO. Good end result of prosthetics, with stable, functional dentures, which were well tolerated and offered satisfaction to the patient, have led to an increased quality of life.