Measurement of Clavicle Fracture Shortening Using Computed Tomography and Chest Radiography

Reliability of preoperative conventional X-ray diagnostics for multifragmentary midclavicular fractures - a retrospective cohort study

PURPOSE

The aim of this study was to evaluate the reliability of assessing preoperative conventional X-ray diagnostics in determining whether a comminuted clavicle fracture is present.

METHODS

A total of 326 patients with complete clinical and radiological documentation treated for a central clavicle fracture at the author's department between January 1, 2012, and June 30, 2023, were included. Among these, 73 were female, and 253 were male in a mean age of 37.5 ± 17 years.

RESULTS

On preoperative X-ray images or operation reports, 109 (33%) or 78 (24%) simple and 217 (67%) or 248 (76%) comminuted fractures were identified. Thity-one out of 248 comminuted fractures were only discovered intraoperatively, accounting for 13%. According to the AO classification on preoperative X-ray or operation reports, 109 or 78 fractures were classified as type A (33% or 24%), 51 or 45 as type B (16% or 14%), and 166 or 203 as type C (51% or 62%). For 40 patients, the discrepancy between the preoperative X-ray and the intraoperative fracture type led to a change in the surgical procedure. This represents 12% of the total cohort or 91% of the fractures that were classified differently preoperatively compared to intraoperatively. In these cases, fractures were treated with open reduction and angular stable plate osteosynthesis instead of the preoperatively planned elastic stable intramedullary nailing (ESIN).

CONCLUSION

The results of this study suggest that conventional X-ray diagnostics may not always detect comminuted clavicle shaft fractures. The treating physician should be aware of this issue.

SHORTENING OF CLAVICLE FRACTURES: PHYSICAL VERSUS IMAGE EXAMINATIONS

Objective

Determine the reliability of three different methods of evaluating bone shortening in displaced midshaft clavicle fractures (DCMF).

Method

A cross-sectional analytical study evaluated bone shortening by metric tape (MT), radiography (X-ray), and computed tomography (CT). Twenty-six men had been evaluated and used clavícula not broken as control. The collection of data was of the blind type for three specialists. Differences and reliability were analyzed with the Friedman and Kappa tests and validated with the T-test (CI: 95%; significance index p<0.05; Software "R" version 3.2.2).

Results

The MT measurements (control) showed abnormal distribution and significant statistical difference concerning the imaging tests (p=0.000008). There was a similarity between X-ray and CT and Kappa agreement of 0.65. The fractured clavicles presented similar measurements between the three methods (p=0.059), and the T-tests proved that the similarity was caused by chance or possible measurement errors.

Conclusion

Measurement by metric tape showed a tendency to overestimate bone shortening. The CT showed more reliable results for the diagnosis; however, the X-ray was sufficient for decision-making by surgeons, and therefore, it is not possible to rule out the importance of this resource for DCMF. Level of Evidence IV; Case-Control Study.

Less than 1.5cm shortening in clavicle midshaft fracture has long-term functional impact

INTRODUCTION

Mediolateral shortening is a risk in treatment of clavicle shaft fracture, and can lead to scapular dyskinesis and shoulder dysfunction. Many studies advocated surgical treatment if shortening exceeds 15mm.

HYPOTHESIS

Clavicle shaft shortening of less than 15mm has negative impact on shoulder function at more than 1 year's follow-up.

MATERIALS AND METHODS

A retrospective case-control comparative study was performed, with assessment by an independent observer. Clavicle length was measured on frontal radiographs showing both clavicles, and the ratio between the healthy and affected sides was calculated. Functional impact was assessed on Quick-DASH. Scapular dyskinesis was analyzed by global antepulsion on Kibler's classification. In total, 217 files were retrieved for a 6-year period. Clinical assessment was performed for 20 patients managed non-operatively and 20 patients managed by locking plate fixation, at a mean 37.5months' follow-up (range: 12-69months).

RESULTS

Mean Quick-DASH score was significantly higher in the non-operated group: 11.363 [0-50] versus 2.045 [0-11.36] (p=0.0092). Pearson ρ correlation between percentage shortening and Quick-DASH score was -0.3956 [95% CI: -0.6295; -0.0959] (p=0.012). Clavicle length ratio differed significantly between groups: operated group, +2.2% [-5.1%; +17%] for 0.34cm; non-operated group, -8.28% [-17.3%; -0.7%] for 1.38cm (p<0.0001). Shoulder dyskinesis was significantly more frequent non-operated patients: 10 versus 3 (p=0.018). A threshold of 1.3cm shortening was found for functional impact.

CONCLUSION

Restoring scapuloclavicular triangle length is an important aim in management of clavicular fracture. Surgery by locking plate fixation is therefore to be recommended in case of>8% radiological shortening (1.3cm) to avoid medium- and long-term complications in shoulder function.

LEVEL OF EVIDENCE

III; case-control study.

The deformities of acute diaphyseal clavicular fractures: a three-dimensional analysis

BACKGROUND

Although minimally invasive surgeries have gained popularity in many orthopaedic fields, minimally invasive approaches for diaphyseal clavicular fracture have not been widely performed, which is attributed to difficulties in performing a closed reduction of fracture deformities of a curved bone in a three-dimensional space. The goal of this study was to investigate the radiographic parameters of fracture deformities in a three-dimensional space and to identify the risk factors for deformities.

METHODS

The computed tomography images of 100 patients who sustained a clavicle fracture were included. Five parameters were used to analyze the deformities: change in clavicle length, fracture displacement, and fragment rotation around the X, Y, Z axes. The change in length was assessed using the length of the endpoint line. The displacement was assessed using the distance between the fracture midpoints. The rotation deformities were assessed using the Euler angles. The correlation between the parameters was evaluated with the Pearson correlation coefficient. The risk factors were evaluated using univariable analysis and multiple regression analysis.

RESULTS

The average change in length was - 5.3 ± 8.3 mm. The displacement was 11.8 ± 7.1 mm. The Euler angles in the Z-Y-X sequences were -1 ± 8, 1 ± 8, and - 8 ± 13 degrees. The correlation coefficient between the change in length and the displacement was - 0.724 (p < 0.001). The variables found to increase the risk of shortening and displacement were right-sided fracture (p = 0.037), male sex (p = 0.015), and multifragmentary type (p = 0.020). The variables found to increase the risk of rotation deformity were the number of rib fractures (p = 0.001) and scapula fracture (p = 0.025).

CONCLUSIONS

There was a strong correlation between shortening and displacement. The magnitude of anterorotation around the X axis was greater than the magnitude of retraction around the Z axis and depression around the Y axis. The risk factors for shortening and displacement included right-sided fracture, male sex, and multifragmentary type. The risk factor for retraction around the Z axis was the number of rib fractures, and the risk factor for depression around the Y axis was scapula fracture. These results could be useful adjuncts in guiding minimally invasive surgical planning for diaphyseal clavicular fractures.

Value of postoperative computed tomography for the diagnosis of lateral hinge fracture in medial opening-wedge supramalleolar osteotomy

INTRODUCTION

It remains unclear whether computed tomography (CT) is superior to plain radiography in detecting lateral hinge fractures after medial opening-wedge supramalleolar osteotomy (SMO) of the ankle joint. This study aimed to evaluate the disparity between postoperative plain radiography and CT in detecting lateral hinge fractures after medial opening-wedge SMO and to identify the predictive factors of lateral hinge fractures.

MATERIALS AND METHODS

This retrospective study included 39 patients who underwent medial opening-wedge SMO. The immediate postoperative plain radiography and CT scan images were retrieved, and the presence of lateral hinge fractures was independently determined. Depending on the fracture gap, the lateral hinge fractures were subclassified as stable (gap < 2 mm) or unstable (gap ≥ 2 mm) fractures. To investigate the predictive factors, the cases were divided based on diagnostic tools such as plain radiography and CT.

RESULTS

The incidence of lateral hinge fractures was 48.7% (19/39) on plain radiographs and 61.5% (24/39) on CT scans. Five cases of lateral hinge fractures additionally detected on CT scans were stable fractures, and all had been classified as no fracture on plain radiographs. The unstable fractures that had been subclassified based on plain radiographs did not change on CT scans. None of the variables were associated with the presence of lateral hinge fractures on plain radiographs and CT scans.

CONCLUSIONS

Postoperative CT after medial opening-wedge SMO has no additional diagnostic value if the lateral hinge fracture has already been diagnosed on plain radiography. Therefore, postoperative CT is only recommended when lateral hinge fractures are not visible on plain radiographs.

Fracture edge features of diaphyseal clavicular fractures: a morphologic study

BACKGROUND

Previous researchers used transverse fractures centered over the midpoint of the clavicle as the diaphyseal clavicular fracture models. However, as a result of shear stress concentration in sigmoid-shaped structures, most diaphyseal clavicular fractures have coronal fracture edges and are located distal to the midpoint. The purpose of this study was to quantify the morphology and utilize these parameters to establish clinically relevant fracture models.

METHODS

The computed tomographic DICOM data of 100 consecutive patients were included. We investigated the morphologic characteristics of the fracture edges after virtual fracture reduction. The fracture orientation was determined based on the normal vectors of the best-fit plane of the fracture edges. The fracture location was measured by the extreme points of the edges. The fracture configuration was evaluated using fracture maps.

RESULTS

There were 28 simple, 43 wedge, and 29 multifragmentary types. Coronal oriented fracture edges accounted for more than 70% of the simple, wedge, and multifragmentary types. The most proximal point of the proximal edge was located at 46.7% (42.0%-56.5%), 47.6% (42.5%-50.1%), and 46.3% (42.0%-49.3%) of the endpoint line in the simple, wedge, and multifragmentary types, respectively (P = .548). The most distal point of the distal edge was located at 72.2% (68.4%-75.0%), 73.2% (69.5%-76.9%), and 74.0% (69.6%-77.1%) of the endpoint line (P = .353). The longest proximal main fragments occurred in the simple types at 71.9% (66.3%-75.4%) of the endpoint line (P < .001), and the shortest distal main fragments occurred in the multifragmentary types at 55.8% (49.8%-59.3%) of the endpoint line (P = .001). The heatmaps showed a high concentration of anteriorly distributed wedge fragments (88%; n = 38/43) and coronally distributed multifragmentary fragments (62%; n = 18/29).

CONCLUSIONS

We showed that typical diaphyseal clavicular fractures have coronal fracture edges and are located within the distal half of the diaphyseal segment. The fractured fragments were initiated anteriorly in the wedge types and then propagated coronally in the multifragmentary types. The features of these fracture edges could be useful in designing osteotomy models and provide different perspectives of anterior and superior plating techniques.

Assessment of the measurement methods in midshaft clavicle fracture

Background

Clavicle fractures account for approximately 5% of all fractures in adults and 75% of clavicle fractures occur in the midshaft. Shortening greater than two centimeters is an indicative of surgical treatment. Radiographic exams are often used to diagnose and evaluate clavicle fractures but computed tomography (CT) scan is currently considered the best method to assess these deformities and shortening.

Goal

1- To investigate whether different methods of performing the radiographic exam interfere on the measurement of the fractured clavicle length.

2- Compare the clavicle length measurements obtained by the different radiographic exam methods with the CT scan measurements, used as a reference.

Materials and methods

Twenty-five patients with acute (< 3 weeks) midshaft clavicle fracture were evaluated. Patients underwent six radiographic images: PA Thorax (standing and lying), AP Thorax (standing and lying) and at 10° cephalic tilt (standing and lying), and the computed tomography was used as reference.

Results

The mean length (cm) obtained were: 14,930 on CT scan, 14,860 on PA Thorax Standing, 14,955 on PA Thorax Lying, 14,896 on AP Thorax Standing, 14,960 AP Thorax Lying, 15,098 on 10° cephalic tilt Standing and 15,001 on 10° cephalic tilt Lying, (p > 0,05).

Conclusion

1- There is no significant statistical difference in the clavicle fracture length measurement among the variety of radiographic exam performances.

2- The method that comes closest to computed tomography results is the PA thorax incidence, with the patient in the lying position.

Prediction of Stature to Discriminate Chest X-Ray Using Longitudinal Scapular and Clavicular Lengths

Aim: In clinical examinations, it is sometimes unknown whether the chest X-ray belongs to the patient. Here, we aimed to develop estimation equations that can predict the stature of male and female patients using scapular and clavicular length measurements on chest X-rays to determine to who the chest X-ray belongs. Methods: This cross-sectional study was conducted on 200 adult patients (104 females and 96 males; mean age 50.6 years) who underwent a routine posteroanterior chest x-ray. The longitudinal scapular length and longitudinal clavicular length were measured on the chest x-ray. Multiple linear regression analysis was used to develop the estimation equations. External validation of the estimated equations was tested on 100 adult patients (50 females and 50 males; mean age 56.7 years) and agreement between measured and estimated stature was investigated by the Bland and Altman method. Results: Stature was equal to 11.1-fold of longitudinal scapular length and 10.5-fold of longitudinal clavicular length in males while it was equal to 11.8-fold of longitudinal scapular length and 10.7-fold of longitudinal clavicular length in females. Stature was found to be significantly correlated with age, weight, longitudinal scapular length, and longitudinal clavicular length in men, and with age and longitudinal clavicular length in women. Multiple linear regression analysis revealed an estimation equation for stature in males was: 131.3 - 0.174 (Age) + 0.161 (Weight) + 0.083 (longitudinal scapular length) + 0.134 (longitudinal clavicular length), and in females was 131.2 - 0.137 (Age) + 0.225 (longitudinal clavicular length). There was good agreement between measured and estimated stature in male and female patients. Conclusion: The stature of the patient can be estimated using the derived equations based on the longitudinal scapular length and longitudinal clavicular length measurements on chest x-ray. If it is not possible to determine to who the chest X-ray belongs in clinical practice, the patient's stature can be estimated with the help of the equations and possible errors can be prevented. Keywords: chest x-ray, clavicle, scapula, estimation techniques, stature

Three-dimensional reconstruction and virtual reposition of fragments compared to two dimensional measurements of midshaft clavicle fracture shortening

Background

Midshaft clavicle fracture shortening measurement is a reported key element for indication to surgical management and reporting of clinical trials. Determination of pre-fracture clavicle length for shortening measurement remains an unresolved issue. The purpose of the study was to assess accuracy of a novel technique of three-dimensional reconstruction and virtual reposition of bone fragments (3D-VR) for determination of pre-fracture clavicle length and measurement of shortening.

Methods

Accuracy of 3D-VR measurements was assessed using 5 synthetic bone clavicle fracture models. Measurements were compared between caliper and 3D-VR technique measurements. Correlation between 3D-VR and 2D measurements on standard radiographs was assessed on a cohort of 20 midshaft fractures. Four different methods for 2D measurements were assessed.

Results

Mean difference between caliper measurements and 3D-VR was 0.74 mm (95CI = − 2.51;3.98) (p = 0.56) on synthetic fracture models. Mean differences between 3D-VR and standard radiograph shortening measurement methods were 11.95 mm (95CI = 7.44;16.46) for method 1 (Jeray et al.) and 9.28 mm (95CI = 4.77;13.79) for method 2 (Smekal et al.) (p < 0.05). Differences were − 1.02 mm (95CI = − 5.53;3.48) for method 3 (Silva et al.) and − 2.04 mm (95CI = − 6.55;2.47) for method 4 (own method). Interobserver correlation ranged between 0.85 and 0.99. A false positive threshold of 20 mm was measured by the two observers in 25% of the case according to method of method 1, 30–35% with method 2, 15% with method 3 et al. and 5–10% with the method 4.

Conclusion

3D VR is accurate in measuring midshaft clavicle fracture length and shortening. Two dimensional measurements may be used for approximation of clavicular shortening.

Antegrade Intramedullary Fixation for Clavicular Shaft Fracture: A Technical Trick

SUMMARY

The standard open reduction and internal fixation technique with a plate and screws for a simple mid shaft clavicular fracture necessitates a relatively large incision and can also lead to variable amount of keloid scar formation. Historically, other techniques of more minimally invasive retrograde intramedullary fixation with the entry point posterolaterally on the shoulder have shown their own disadvantages and complications. We present a surgical technique of antegrade intramedullary fixation for mid shaft clavicular fractures and an illustrative case series.

The accuracy of computed tomography for clavicle non-union evaluation

BACKGROUND

The primary aim of this study is to determine the accuracy of CT scanning when evaluating non-union of the clavicle.

METHODS

A retrospective review was performed of all CT scans undertaken for suspected nonunion of midshaft clavicle fractures over a 10-year period. The influence of scan timing, callus and patient characteristics was evaluated.

RESULTS

One hundred eighty-four CT scans were analysed. No patient was incorrectly diagnosed with union (n = 85). Ninety-nine scans were reported as non-union with inadequate bridging callus, 19 of which were united at operation or on repeat CT imaging and represented delayed unions. Atrophic callus was found in 57 patients and all of which had a confirmed non-union (positive predictive value 100%). A hypertrophic callus was found in 42 patients, all of the delayed unions were found in this group (positive predictive value for non-union 55%, p < 0.001). CT compared to radiographs showed greater inter-observer agreement for union (weighted kappa 0.75 vs. 0.50 respectively). Overall, CT is 100% sensitive and 81.7% specific for non-union diagnosis.

DISCUSSION

CT has excellent accuracy to determine clavicle union but approximately one in five suspected non-unions went onto unite. Hypertrophic callus finding resulted in a delayed union in approximately half of the cases in our study.

White-Light Body Scanning Captures Three-Dimensional Shoulder Deformity After Displaced Diaphyseal Clavicle Fracture

OBJECTIVE

We sought to determine if white-light three-dimensional (3D) body scanning can identify clinically relevant shoulder girdle deformity after displaced diaphyseal clavicle fracture (DCF).

METHODS

Adult patients with DCF (OTA/AO 15A) were prospectively enrolled. Four subcutaneous osseous landmarks were used to measure shoulder girdle morphology of the injured and uninjured shoulder. Measurements were made both manually with a tape measure and digitally with a white-light 3D scanner. Bilateral radiographs were obtained, and clavicle length was recorded. Quick-Disabilities of the Arm, Shoulder, and Hand surveys were administered at injury and at 6 and 12 weeks.

RESULTS

Twenty-two patients were included in the study. At the initial visit, all patients had significant differences in deformity measurements between injured and uninjured shoulders as measured by 3D scanning. There was no difference between shoulders measured using manual measurements. At 6 and 12 weeks, shoulder asymmetry was significantly less in patients treated with surgery compared with nonoperative patients as measured by the 3D scanner alone. Clavicle shortening measured on 3D scanning had weak and moderate positive correlations to radiographs (R = 0.27) and manual measurements (R = 0.53), respectively. Patients treated with surgery had significant functional improvements by 6 weeks, and a similar improvement was not seen until 12 weeks in nonsurgical patients.

CONCLUSION

White-light 3D scanning was able to identify and monitor clinically relevant shoulder girdle deformity after DCF. This tool may become a useful adjunct to clinical examination and radiographic assessment, when determining clinically relevant deformity thresholds. In the future, quantifying and understanding shoulder deformity may inform clinical decision making in these patients.

LEVEL OF EVIDENCE

Prognostic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Long-term outcomes of initially conservatively treated midshaft clavicle fractures

Background

Recent studies about completely displaced midshaft clavicle fractures have reported that their nonunion/malunion rates were significantly higher in conservatively treated patients compared to surgically treated patients. The purpose of this study was to evaluate the factors associated with treatment decisions for midshaft clavicle fractures and also the factors that affect patient satisfaction with their treatment choice.

Methods

We retrospectively reviewed the records of 75 patients who had been diagnosed with a midshaft clavicle fracture and were treated conservatively at a single institution between March 1, 2013, and December 31, 2014. Their medical records were reviewed to investigate the severity of the initial vertical displacement. A telephone survey was carried out to identify the presence of any patient-perceived deformity and determine if the patient eventually underwent surgery and whether the patient would prefer surgery if the injury recurred.

Results

Significantly more patients with vertical displacement ≥100% (9/28) eventually underwent surgery compared to patients with vertical displacement <100% (3/32, p=0.028). Patients with vertical displacement ≥100% (13/28) were significantly more likely to prefer surgery compared to patients with vertical displacement <100% (7/32, p=0.044). Among the conservatively treated patients, nine of 32 participants with a patient-perceived deformity and one of 16 without a patient-perceived deformity responded that they would prefer to receive surgery in same situation in the future (p=0.079).

Conclusions

Patients with a midshaft clavicle fracture with vertical displacement of ≥100% may eventually require surgical treatment. When conservative treatment is carried out, the long-term patient results may be unsatisfactory due to perceived residual deformities.

Intraoperative Identification of Clavicle Fracture Patterns: Do Clavicles Fail in a Predictable Pattern?

OBJECTIVES

To characterize the fracture pattern and pattern of fragmentation for displaced, midshaft clavicle fractures undergoing operative management.

DESIGN

Prospective observational study.

SETTING

Two institutions. Level 1 and Level 2 Trauma Centers.

PATIENTS/PARTICIPANTS

Fifty-three patients who underwent operative repair of midshaft clavicle fracture.

INTERVENTION

All clavicles were treated by operative open reduction internal fixation.

MAIN OUTCOME MEASUREMENTS

All clavicles were categorized by the Robinson classification based on injury plain film bilateral upright clavicle radiographs. In addition, intraoperative fracture characteristics of fragment length and location were measured and recorded to evaluate the fracture pattern. All fractures were analyzed to determine the frequency of segmental comminution versus length-stable patterns, analyze characteristics of butterfly fragment size, number and location as well as the location of the cortical read for those length-stable fractures.

RESULTS

Analysis revealed 55% were Robinson 2B2 based on preoperative radiographs. Length-stable, anatomic reduction was achievable in 83%. For those in which an anatomic cortical read was achievable, 97.7% had a read present in the posterior-superior aspect of the clavicle.

CONCLUSIONS

Midshaft clavicle fractures that meet conventional criteria for operative repair occur in a predictable manner with butterfly fragments generated from anterior-inferior compression and simple fracture line generated from tension along the posterior-superior aspect of the clavicle. Understanding this pattern can assist in the in surgical planning.

Plating and cortical bone grafting of clavicular nonunions: clinical outcome and its relation to clavicular length restoration

Background

The goal of this study was to evaluate whether plating and cortical bone grafting of shortened clavicular nonunions would restore clavicular length and enable bone healing. The association between the clavicular length difference (CLD) between sides and long-term functional outcome was also explored.

Methods

For this retrospective 2-center study, patients who underwent plate fixation with cortical bone grafting of a clavicular nonunion were assessed after ≥2 years. The CLD and bone union were assessed using radiography and navigation ultrasound. The functional outcome was determined by the Constant score, Simple Shoulder Test score, and Subjective Shoulder Value, as well as local pain (0-10 numeric rating scale).

Results

Between 2 and 13 years after surgery, 25 patients (mean age, 53 years; 13 female patients) were examined. The median CLD was 0 mm (range, –17 to 13 mm) on ultrasound measurements and 2 mm (range, –32 to 9 mm) on radiographs. At follow-up, the median Constant score, Simple Shoulder Test score, Subjective Shoulder Value, and pain level were 82 points (range, 38-95 points), 12 points (range, 3-12 points), 95% (range, 60%-100%), and 0 (range, 0-8), respectively. There was no correlation between the CLD and all functional outcome scores. Bone union was achieved in all patients. After plate removal, 4 refractures occurred, 3 of which required revision.

Conclusions

Plate fixation with cortical bone grafting of clavicular nonunions is associated with restoration of clavicular length and a high rate of bone union. There is, however, a considerable risk of refracture following plate removal. There was no association between the CLD and clinical outcome.

Displaced Midshaft Clavicle Fracture Union Can Be Accurately Predicted with a Delayed Assessment at 6 Weeks Following Injury: A Prospective Cohort Study

BACKGROUND

It is unclear if clinical recovery following a midshaft clavicle fracture can accurately predict fracture-healing. The additional information that can be assessed at 6 weeks after injury may have superior predictive value compared with information available at the time of the injury.

METHODS

A prospective study of all patients (≥16 years of age) who sustained a fully displaced midshaft clavicle fracture was performed. We assessed patient demographic characteristics, injury factors, functional scores, and radiographic predictors with a standardized protocol at 6 weeks. Conditional stepwise regression modeling was used to assess which factors independently predicted nonunion at 6 months after the injury as determined by computed tomography (CT). The nonunion predictor 6-week model was compared with a previously validated model based on factors available at the time of the injury, which included smoking, comminution, and fracture displacement.

RESULTS

At 6 months, 200 patients completed follow-up. The CT-defined nonunion rate was 14% (27 of 200). Of the functional scores, the QuickDASH (the abbreviated version of the Disabilities of the Arm, Shoulder and Hand questionnaire) had the highest accuracy on receiver operator characteristic (ROC) curve analysis with a 39.8-point threshold, above which was associated with nonunion (area under curve [AUC], 76.8%; p < 0.001). Sixty-nine percent of the cohort had a QuickDASH score of <40 points at 6 weeks, and 95% (131 of 138) of these patients had fracture union. On regression modeling, a QuickDASH score of ≥40 points (p = 0.001), no callus on radiographs (p = 0.004), and fracture movement on examination (p = 0.001) were significant predictors of nonunion. If none were present, the predicted nonunion risk was 3%, found in 40% (80 of 200) of the cohort. Conversely, if ≥2 of the predictors were present, found in 23.5% of the cohort, the predicted nonunion risk was 60%. The nonunion predictor model at 6 weeks appeared to have superior accuracy (AUC, 87.3%) when compared with the nonunion predictor model at the time of injury (AUC, 64.8%) for fracture-healing on ROC curve analysis.

CONCLUSIONS

Delayed assessment at 6 weeks following displaced midshaft clavicle fracture enables an accurate prediction of patients who are likely to have union with nonoperative management. One in 4 patients are at an increased risk of nonunion and may benefit from operative intervention.

LEVEL OF EVIDENCE

Prognostic Level I. See Instructions for Authors for a complete description of levels of evidence.

Three-dimensional clavicle displacement analysis and its effect on scapular position in acute clavicle midshaft fracture

BACKGROUND

The purpose of this study was to measure the distance of the clavicle in 3 dimensions (3D) and each direction (anterior to posterior, medial to lateral, and superior to inferior) and to analyze the correlation of the angular orientation of the scapula according to each directional distance of the clavicle.

METHODS

Sixty-seven patients with Robinson 2B1 and 2B2 clavicle midshaft fracture (46.0 ± 17.4 years, men = 50, women = 17) were selected as final subjects. Patients' computed tomography was reconstructed using an image processing program (3D Slicer 4.3 software). Anteroposterior (AP) distance, medial-to-lateral distance, superior-to-inferior distance, and 3D distance of both clavicles were measured. The plane connecting the 3 points (superior pole, inferior pole, and center of glenoid) of the scapula was used to calculate differences in the angular orientation between both scapulae.

RESULTS

Among each directional distance of the clavicle, only the AP distance showed negative correlation with scapular angular orientation with anterior tilting, internal rotation, and upward rotation of the scapula (Pearson's correlation coefficient: -0.68, -0.24, and -0.28; P < .001, P = .048, and P = .021).

CONCLUSION

The shortening of the AP distance of the clavicle was related to the angular orientation of the scapula in acute clavicle fracture. AP shortening should be considered when determining the treatment of clavicle fracture.

Is shortening of displaced midshaft clavicle fractures associated with inferior clinical outcomes following nonoperative management? A systematic review

BACKGROUND

Management of displaced midshaft clavicle fractures is controversial. Nonoperative treatment can lead to shortening, a risk factor for nonunion and poor functional outcomes. These inferior results have resulted in authors recommending surgical fixation for fractures with significant shortening. The aim of this systematic review was to analyze the effect of fracture shortening on shoulder function and nonunion rates in nonoperatively managed displaced midshaft clavicle fractures.

METHODS

A review of the online databases MEDLINE and Embase was conducted on February 16, 2018, in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines. The review was registered prospectively in the PROSPERO database. Clinical studies with midshaft clavicle fractures treated nonoperatively reporting an evaluation of the degree of clavicle shortening and either shoulder function or nonunion were included. The studies were appraised using the Methodological Index for Non-Randomized Studies (MINORS) tool.

RESULTS

The search strategy identified 16 studies eligible for inclusion, comprising 4 randomized controlled trials and 12 nonrandomized retrospective comparative studies. Of the 12 case series, 11 failed to demonstrate any correlation between shortening and shoulder outcome scores. Of the 4 randomized controlled trials, 3 reported no significant association between fracture shortening and shoulder outcome scores. The studies also failed to demonstrate a significant association between nonunion and the presence of clavicle shortening.

CONCLUSION

There is no significant association between fracture shortening and nonunion rates or shoulder outcome scores in displaced midshaft clavicle fractures managed nonoperatively.

Segmental Bone Loss of the Clavicle due to Fracture-Related Infection: A Multidisciplinary Challenge

As the surgical treatment of clavicular fractures is increasingly utilized in orthopedics, the number of related complications rises as well. We present a case of segmental bone loss of the clavicle due to fracture-related infection. Treatment was based on a multidisciplinary team approach, which was important for a successful outcome.

Midshaft clavicle fractures treatment: threaded Kirschner wire versus conservative approach

Clavicle fractures are common, accounting for 2.6 to 10% of all fractures. Treatment of these fractures is usually non-surgical. Recent evidence, however, reveals that the final result of non-surgically midshaft clavicular fractures, particularly those with quite large displacements or shortening, is not like that which was previously thought. This study evaluated retrospectively all patients presented with a clavicle fracture at Emergency Department of our Institution, between January 2006 and December 2011. Fractures were classified according to Allman’s radiographic classification system, modified by Nordqvist and Petersson. Patients were distinguished into two groups: one that underwent conservative treatment with a “figure-of-8” orthosis and one that underwent surgery with reduction in fracture and fixation with intramedullary threaded Kirschner wire. Pin removal was performed after 4 weeks of rest in Gilchrist bandage, after clinical and radiographic evaluation demonstrating the bone healing. The QuickDASH score and the Constant Murley Shoulder Score were used to evaluate the clinical outcomes. The radiographic outcome was evaluated at 1 and 6 months of follow-up. Database review provided a final cohort of 58 patients, with similar demographic features. There was no significant difference in qDASH and CS between the two groups. The results of qDASH and CS evaluated in function of the radiographic outcome show a statistically significant correlation between the worst qDASH and CS results and the grade of malunion in both groups. In particular, we have found unsatisfactory results when final shortening of the clavicle was 20 mm or more. On radiographic evaluation, surgical treatment demonstrated a greater efficacy in reducing initial shortening of the fractured bone; this is in opposition to conservative treatment that results very often in malunion, shortening, anatomic alterations and loss of functionality. The use of intramedullary threaded Kirschner wire for fixation of midshaft clavicle fractures is a safe procedure and is recommended in case of shortening greater than 2 cm in high-function-demand patients.