Application of Asymetrical and Hoke Designs for Optimization of Laccase Production by the White-Rot Fungus Fomes fomentarius in Solid-State Fermentation

A comparative screening of laccase-mediator systems by white-rot fungi laccases for biocatalytic benzyl alcohol oxidation

Production of value-added compounds from waste materials is of utmost importance for the development of a sustainable society especially regarding their use as catalysts in industrially relevant synthetic reactions. Herein, we show the production of laccases from four white-rot fungi, which were grown on agricultural residues, specifically Trametes versicolor 11269, Pleurotus ostreatus 1020, Panus tigrinus 707 and Lentinula edodes SC-495. The produced laccases were tested on a laccase-mediator system (LMS) for the biocatalytic oxidation of the model substrate benzyl alcohol into benzaldehyde. The LMS was carried out in the presence both of tetrahydrofuran as co-solvent and of the mediator 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) due to its high redox potential and its ability to perform the oxidation. Tolerance studies showed that the dialyzed solutions were able to tolerate 1% (99:1 v/v) of co-solvent, whereas a concentration of 10% v/v had a detrimental activity. Performances in the biocatalytic oxidation of laccase solutions from different purification steps were compared. Similar conversion was observed for laccase in dialysis (raw) and gel filtration (GF) product versus commercial T. versicolor laccase. The latter oxidized almost 99% of substrate while the other laccase solutions were able to reach a conversion from 91% for the laccase solution from P. tigrinus 707 after dialysis, to 50% for the laccase solution from P. ostreatus 1020 after gel filtration. This work highlights the potential of unpurified laccase solutions to be used as catalysts in synthetic reactions.

The production of laccases by white-rot fungi under solid-state fermentation conditions

Laccases (E.C. 1.10.3.2) produced by white-rot fungi (WRF) can be widely used, but the high cost prevents their use in large-scale industrial processes. Finding a solution to the problem could involve laccase production by solid-state fermentation (SSF) simulating the natural growth conditions for WRF. SSF offers several advantages over conventional submerged fermentation (SmF), such as higher efficiency and productivity of the process and pollution reduction. The aim of this review is therefore to provide an overview of the current state of knowledge about the laccase production by WRF under SSF conditions. The focus is on variations in the up-stream process, fermentation and down-stream process and their impact on laccase activity. The variations of up-stream processing involve inoculum preparation, inoculation of the medium and formulation of the propagation and production media. According to the studies, the production process can be shortened to 5-7 days by the selection of a suitable combination of lignocellulosic material and laccase producer without the need for any additional components of the culture medium. Efficient laccase production was achieved by valorisation of wastes as agro-food, municipal wastes or waste generated from wood processing industries. This leads to a reduction of costs and an increase in competitiveness compared to other commonly used methods and/or procedures. There will be significant challenges and opportunities in the future, where SSF could become more efficient and bring the enzyme production to a higher level, especially in new biorefineries, bioreactors and biomolecular/genetic engineering.

Decolorization of textile azo dye Novacron Red using bacterial monoculture and consortium: Response surface methodology optimization

The present study was intended toward the optimization of a textile dye Novacron Red decolorization by single and mixed culture of Bacillus strains namely, B. firmus, B. filamentosus and B. subterraneus. Optimization of dye decolorization using Bacillus monocultures was conducted using central composite design. The maximum dye decolorization achieved under optimized conditions for B. firmus, B. filamentosus and B. subterraneus was 89.24%, 88.28% and 88.45%, respectively. The effect of various consortia of selected Bacillus strains on dye removal was evaluated by applying a mixture design. The best dye (100 mg/L) decolorization yield (84%) was achieved using the consortium of B. filamentosus and B. subetrraneus.The Fourier Transform Infrared Spectroscopy analyses confirmed biodegradation potential of the two Bacillus strains. The results highlighted the potential of mono- and co-cultures of Bacillus strains for application in textile wastewater treatment. PRACTITIONER POINTS: Novel dye-decolorizing Bacillus strains were isolated from marine sediment. Optimization of decolorization was conducted using response surface methodology. Efficient decolorization of textile dye by Bacillus strains on mono- and co-cultures. The efficiency of the consortium B. filamentosus and B. subetrraneus on dye removal.

Bioprocess optimization of laccase production through solid substrate fermentation using Perenniporia tephropora-L168 and its application in bioremediation of triaryl-methane dye

Laccases are multi copper oxidases that can oxidize both phenolic and nonphenolic lignin related compounds. Consequently, there has been continuous demand for laccases for the oxidative degradation of phenolic dyes in effluents. In view of this, the present work was focused on laccase production by solid substrate fermentation using a newly isolated fungus Perenniporia tephropora-L168. To intensify the laccase production, the process parameters pH, nitrogen, inducer, and substrate: water ratio were optimized by using statistical model. A set of optimal conditions noted were pH 3, nitrogen 0.001 g/L; inducer 0.5% and substrate: water ratio (1:10), which yielded laccase 1,160 U/g. The crude laccase exhibited noteworthy potential to degrade a triaryl-methane dye especially Malachite green. Also, during bioremediation studies, the statistical process optimization could achieve 81% decolourization within 180 min. The laccase treatment brought chemical transformation in malachite green as evident from UV-Visible spectra, FTIR, HPLC while toxicity against bacteria and fungi was also reduced. During phytotoxicity study, effect of treated and untreated dye on germination of seed was analyzed. Interestingly, the germination index for Vigna aconitifolia and Vigna radiata was increased by two and fourfold, respectively. Overall, this work demonstrates optimized production of laccase using Perenniporia tephropora-L168 and its efficient bioremediation potential for triaryl-methane dye.

Screening and production of a potential extracellular fungal laccase from Penicillium chrysogenum: Media optimization by response surface methodology (RSM) and central composite rotatable design (CCRD)

This paper describes the isolation of potent extracellular-laccase producing white-rot fungus, identified by 18 s-rRNA as Penicillium-chrysogenum and its medium optimization by central-composite-rotatable-design using RSM. The optimum laccase-activity of 6.0 U ml-1 was obtained and maximum activity of 7.9 U ml-1 was achieved by statistical-optimization of the medium at 32 °C for 5 days. The molecular-weight of the laccase was found to be 67 kDa. UV-visible absorption-spectrum analysis shows peak at 600 nm and 325 nm corresponding to the type-I Cu(II) & type-III binuclear Cu(II) pair respectively confirming presence of laccase. The sharp endothermic peak at 150 °C and three-phases of protein denaturation was observed by DSC and TGA analysis for enzyme protein. The FT-IR analysis of laccase shows band at 1405cm-1, 1656 cm-1 &3400cm-1 corresponding to amide-I band, amide-II band and amino-acid group respectively. Results of the study show the enzyme is capable of carrying-out hydrolytic-cleavage of chemical-pollutants from the industrial waste-water for providing sustainable-greener environment.

Functional expression, production, and biochemical characterization of a laccase using yeast surface display technology

A Trametes versicolor laccase was functionally expressed on the membrane surface of Saccharomyces cerevisiae EBY100. Laccase expression was increased 6.57-fold by medium optimization and surpassed production by the native strain. Maximal laccase and biomass production reached 19 735 ± 1719 Ug^-1 and 6.22 ± 0.53 gL^-1 respectively, after 2 d of culture. Optimum oxidization of all substrates by laccase was observed at pH 3. Laccase showed high affinity towards substrates used with Km (mM) and Vmax (μmol min^-1) values of 0.57 ± 0.0047 and 24.55 ± 0.64, 1.52 ± 0.52 and 9.25 ± 1.78, and 2.67 ± 0.12 and 11.26 ± 0.75, were reported for ABTS, 2, 6-DMP and GUA, respectively. EDTA and NaN₃ displayed none competitive inhibition towards laccase activity. The optimum temperature for activity was 50 °C; however, the enzyme was stable over a wide range of temperatures (25-70 °C). The biologically immobilized laccase showed high reusability towards phenolic substrates and low reusability with non-phenolic substrates. High affinity for a diversity phenolic compounds and great ethanol tolerance substantiates this laccase/yeast biocatalyst potential for application in the production of bioethanol.

A High Redox Potential Laccase from Pycnoporus sanguineus RP15: Potential Application for Dye Decolorization

Laccase production by Pycnoporus sanguineus RP15 grown in wheat bran and corncob under solid-state fermentation was optimized by response surface methodology using a Central Composite Rotational Design. A laccase (Lacps1) was purified and characterized and the potential of the pure Lacps1 and the crude culture extract for synthetic dye decolorization was evaluated. At optimal conditions (eight days, 26 °C, 18% (w/w) milled corncob, 0.8% (w/w) NH₄Cl and 50 mmol·L⁻¹ CuSO₄, initial moisture 4.1 mL·g⁻¹), the laccase activity reached 138.6 ± 13.2 U·g⁻¹. Lacps1 was a monomeric glycoprotein (67 kDa, 24% carbohydrate). Optimum pH and temperature for the oxidation of 2,2’-azino-bis(3-ethylbenzthiazoline-6-sulfonate) (ABTS) were 4.4 and 74.4 °C, respectively. Lacps1 was stable at pH 3.0–8.0, and after two hours at 55–60 °C, presenting high redox potential (0.747 V vs. NHE). ABTS was oxidized with an apparent affinity constant of 147.0 ± 6.4 μmol·L⁻¹, maximum velocity of 413.4 ± 21.2 U·mg⁻¹ and catalytic efficiency of 3140.1 ± 149.6 L·mmol⁻¹·s⁻¹. The maximum decolorization percentages of bromophenol blue (BPB), remazol brilliant blue R and reactive blue 4 (RB4), at 25 or 40 °C without redox mediators, reached 90%, 80% and 60%, respectively, using either pure Lacps1 or the crude extract. This is the first study of the decolorization of BPB and RB4 by a P. sanguineus laccase. The data suggested good potential for treatment of industrial dye-containing effluents.

Fungal strain matters: colony growth and bioactivity of the European medicinal polypores Fomes fomentarius, Fomitopsis pinicola and Piptoporus betulinus

Polypores have been applied in traditional Chinese medicine up to the present day, and are becoming more and more popular worldwide. They show a wide range of bioactivities including anti-cancer, anti-inflammatory, antiviral and immuno-enhancing effects. Their secondary metabolites have been the focus of many studies, but the importance of fungal strain for bioactivity and metabolite production has not been investigated so far for these Basidiomycetes. Therefore, we screened several strains from three medicinal polypore species from traditional European medicine: Fomes fomentarius, Fomitopsis pinicola and Piptoporus betulinus. A total of 22 strains were compared concerning their growth rates, optimum growth temperatures, as well as antimicrobial and antifungal properties of ethanolic fruit body extracts. The morphological identification of strains was confirmed based on rDNA ITS phylogenetic analyses. Our results showed that species delimitation is critical due to the presence of several distinct lineages, e.g. within the Fomes fomentarius species complex. Fungal strains within one lineage showed distinct differences in optimum growth temperatures, in secondary metabolite production, and accordingly, in their bioactivities. In general, F. pinicola and P. betulinus extracts exerted distinct antibiotic activities against Bacillus subtilis and Staphylococcus aureus at minimum inhibitory concentrations (MIC) ranging from 31-125 μg mL⁻¹; The antifungal activities of all three polypores against Aspergillus flavus, A. fumigatus, Absidia orchidis and Candida krusei were often strain-specific, ranging from 125-1000 μg mL⁻¹. Our results highlight that a reliable species identification, followed by an extensive screening for a ‘best strain’ is an essential prerequisite for the proper identification of bioactive material.

Improved Laccase Production by Trametes pubescens MB89 in Distillery Wastewaters

Various culture parameters were optimised for laccase synthesis by Trametes pubescens MB89, including pH, carbon source, nitrogen source, lignocellulosic supplements, and reported inducers. Glucose, in conjunction with a complex nitrogen source at pH 5.0, resulted in the highest laccase yield. Adding ethanol, copper, or 2,5-xylidine prior to inoculation further improved laccase concentrations. The addition of 2,5-xylidine was further investigated with multiple additions applied at varying times. This novel application substantially improved laccase production when applied regularly from inoculation and during the growth phase, and also countered glucose repression of laccase synthesis. Single and multiple factor changes were studied in three distillery wastewaters and a wine lees. A synergistic increase in laccase synthesis was observed with the addition of glucose, copper, and 2,5-xylidine. Single addition of 2,5-xylidine proved most beneficial with distillery wastewaters, while copper addition was most beneficial when using the wine lees as a culture medium.