A comparative evaluation of the effect of various additives on selected physical properties of white mineral trioxide aggregate

The effect of three additives on properties of mineral trioxide aggregate cements: a systematic review and meta-analysis of in vitro studies

BACKGROUND

Several efforts have been made to improve mechanical and biological properties of calcium silicate-based cements through changes in chemical composition of the materials. This study aimed to investigate the physical (including setting time and compressive strength) and chemical (including calcium ion release, pH level) properties as well as changes in cytotoxicity of mineral trioxide aggregate (MTA) after the addition of 3 substances including CaCl2, Na2HPO4, and propylene glycol (PG).

METHODS

The systematic review was conducted in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). Electronic searches were performed on PubMed, Embase, and Scopus databases, spanning from 1993 to October 2023 in addition to manual searches. Relevant laboratory studies were included. The quality of the included studies was assessed using modified ARRIVE criteria. Meta-analyses were performed by RevMan statistical software.

RESULTS

From the total of 267 studies, 24 articles were included in this review. The results of the meta-analysis indicated that addition of PG increased final setting time and Ca2+ ion release. Addition of Na2HPO4 did not change pH and cytotoxicity but reduced the final setting time. Incorporation of 5% CaCl2 reduced the setting time but did not alter the cytotoxicity of the cement. However, addition of 10% CaCl2 reduced cell viability, setting time, and compressive strength.

CONCLUSION

Inclusion of 2.5% wt. Na2HPO4 and 5% CaCl2 in MTA can be advisable for enhancing the physical, chemical, and cytotoxic characteristics of the admixture. Conversely, caution is advised against incorporating elevated concentrations of PG due to its retarding effect.

TRIAL REGISTRATION

PROSPERO registration number: CRD42021253707.

Synthesis of a Calcium Silicate Cement Containing a Calcinated Strontium Silicate Phase

Objectives

The positive effects of strontium on dental and skeletal remineralization have been confirmed in the literature. This study aimed to assess the properties of a calcium silicate cement (CSC) containing a sintered strontium silicate phase.

Materials and Methods

The calcium silicate and strontium silicate phases were synthesized by the sol-gel technique. Strontium silicate powder in 0 (CSC), 10 (CSC/10Sr), 20 (CSC/20Sr), and 30 (CSC/30Sr) weight percentages was mixed with calcium silicate powder. Calcium chloride was used in the liquid phase. X-ray diffraction (XRD) of specimens was conducted before and after hydration. The setting time and compressive strength were assessed at 1 and 7 days after setting. The set discs of the aforementioned groups were immersed in the simulated body fluid (SBF) for 1 and 7 days. The ion release profile was evaluated by inductively coupled plasma-optical emission spectrometry (ICP-OES). Biomineralization on the specimen surface was evaluated by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS). Data were analyzed by the Kolmogorov-Smirnov test, one-way and mixed ANOVA, Levene's test, and LSD post hoc test (P  < 0.05).

Results

Except for an increasement in the peak intensity of hydrated specimens, XRD revealed no other difference in the crystalline phases of hydrated and nonhydrated specimens. The compressive strength was not significantly different at 1 and 7 days in any group (P  > 0.05). The setting time significantly decreased by an increase in percentage of strontium (P  < 0.05). Release of Ca and Si ions significantly decreased by an increase in percentage of strontium (P  < 0.05). SEM/EDS showed the formation of calcium phosphate deposits at 1 and 7 days.

Conclusion

Incorporation of 10-30 wt% sintered strontium silicate phase as premixed in CSC can significantly decrease the setting time without compromising the compressive strength or biomineralization process of the cement.

Effect of incorporation of nano-graphene oxide on physicochemical, mechanical, and biological properties of tricalcium silicate cement

OBJECTIVE

Evaluation of setting time, compressive strength, pH, calcium ion release, and antibacterial activity of mineral trioxide aggregate (MTA) after modification with three different concentrations of nano-graphene oxide (GO) powder compared to unmodified Biodentine as a commercial control.

METHODS

GO powder, unhydrated and hydrated cements were characterized using Environmental Scanning Electron Microscope (ESEM) with Energy Dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Raman Spectroscopy, and Fourier Transform Infrared spectroscopy (FTIR). GO was also analyzed using Scanning Transmission Electron Microscope (STEM) to determine average lateral dimensions. Specimens were prepared and grouped according to the concentration of GO added to Rootdent MTA (control, 1, 3, and 5 wt%) and the material used (MTA and unmodified Biodentine) into five groups. Setting time was evaluated using Gillmore penetrometer (n = 5). Compressive strength was evaluated using universal testing machine (n = 7). pH and calcium ion release were assessed using pH meter and Induced Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) at 1, 7, 14, and 28 days (n = 7). Antibacterial activity was evaluated against Streptococcus mutans using direct contact test (n = 7). One-way and repeated measures ANOVA followed by Tukey's post hoc test were used for data analysis with significance level set at p ≤ 0.05.

RESULTS

Addition of GO to MTA reduced both initial and final setting time. GO modified MTA groups and unmodified Biodentine showed significantly increased calcium ion release at 14 and 28 days. All cements showed alkaline pH of the storage media at all tested time intervals. 1 wt% GO recorded the highest compressive strength values in MTA modified groups. The increased concentration of GO from 1 to 5 wt% successively increased antibacterial activity of MTA, with Biodentine showing the lowest significant value.

CONCLUSION

Addition of 1 wt% GO can significantly improve the tested properties of tricalcium silicate-based cements without compromising their compressive strength.

CLINICAL SIGNIFICANCE

GO is a promising modification for tricalcium silicate cements to improve setting time, compressive strength, and antibacterial activity to provide a variety of materials for different clinical situations. This in turn can reduce the risk of reinfection and allow placement of the final restoration in a single visit.

Effects of a mineralization-promoting peptide on the physical and chemical properties of mineral trioxide aggregate

Mineral trioxide aggregate (MTA) has been used widely in dentistry due to its sealing ability and biocompatibility. Delayed setting time is one of the major limitations of MTA. Various additives have been studied to further improve the properties of MTA with varied degrees of success. In this study, we have investigated the effect of a calcium phosphate mineralization promoting-peptide (MPP3) on the physical and chemical properties of MTA in comparison with Na₂HPO₄. Based on the reported effects of MPP3 on calcium-phosphate mineralization reaction, our hypothesis was that MPP3 may also show beneficial effects on the calcium-silicate mineralization system of MTA. Na₂HPO₄ was used for comparison since its setting accelerant effect on MTA has been well documented. The cements were prepared by mixing with distilled water, 0.40 mM MPP3 solution, 15% Na₂HPO₄ solution, and a combination of MPP3 and Na₂HPO₄ solution. Initial and final setting times were measured via Vicat needle. Microhardness values were measured via Vickers indenter at 1,3,7, and 28 days after hydration. Compressive strength after setting was measured via universal testing machine. Morphological and compositional analyses were performed via FESEM imaging, XRD and Raman spectroscopy. The microhardness data was evaluated via repeated-measures ANOVA. Setting time and compressive strength data were evasluated via one-way ANOVA. Initial setting time was reduced to ∼3 min in the Na₂HPO₄ containing groups but remained at ∼5 min in the control and MPP3 groups. Final setting times were significantly reduced in all groups compared to the control group. The reduction in the final setting times in the Na₂HPO₄ containing groups were significantly higher compared to the MPP3 group. Microhardness was significantly higher in the MPP3 group at all time points. No statistically significant difference in compressive strength was observed among the groups. FESEM analysis showed presence of ettringite crystals in the MPP3 group, and NaBiO₃ crystals in the Na₂HPO₄ containing groups. XRD analysis showed a broadening of peaks at 2θ = 32° in the Na₂HPO₄ containing groups, possibly due to presence of NaBiO₃. Raman spectroscopy showed statistically higher ettringite content in the MPP3 containing groups. Our findings indicate that MPP3 is a beneficial additive to eliminate some of the drawbacks associated with MTA with no detrimental effects on mechanical properties and without resulting in phases that potentially cause discoloration, such as NaBiO₃. We propose that the reduced final setting time and increased microhardness by MPP3 may be associated with the increased ettringite content. Future studies, where wider range of MPP3 concentrations are studied may help elucidate and optimize the beneficial effects of MPP3 observed in this study.

Effect of Silver Nanoparticles of Herbal Origin on the Compressive and Push-out Bond Strengths of Mineral Trioxide Aggregate

Introduction

The purpose of this in vitro study was to investigate the effect of incorporating silver nanoparticles (AgNPs) of herbal origin into mineral trioxide aggregate (MTA) on the push-out bond strength (PBS) and compressive strength (CS) in simulated furcal area perforations.

Materials and Methods

In this in vitro study, simulated furcal area perforations (1.3 mm in diameter and 2 mm in depth) were created in 40 extracted human lower molar teeth, which were divided into two groups (n=20): MTA alone and MTA combined with AgNPs (2% wt). Using a universal testing machine, PBS was evaluated by performing push-out tests, while CS was assessed using cylindrical specimens. The normal distribution of data was checked using the Kolmogorov-Smirnov test, and statistical analysis was performed using two-way ANOVA.

Results

The CS results showed no significant difference between the MTA group at 4 and 21 days (P=0.297), but a significant difference was observed in the nanosilver/MTA group (P=0.013). However, there was no significant difference in the push-out bond strength among the study groups (P>0.05).

Conclusion

The incorporation of herbal origin silver nanoparticles did not significantly affect the PBS or CS of MTA.

Effect of bioactive glass addition on the physical properties of mineral trioxide aggregate

Background

The addition of bioactive glass (BG), a highly bioactive material with remineralization potential, might improve the drawback of weakening property of mineral trioxide aggregates (MTA) when it encounters with body fluid. This study aims to evaluate the effect of BG addition on physical properties of MTA.

Methods

ProRoot (MTA), and MTA with various concentrations of BG (1, 2, 5 and 10% BG/MTA) were prepared. Simulated body fluid (SBF) was used to investigate the effect of the storage solution on dentin remineralization. Prepared specimens were examined as following; the push-out bond strength to dentin, compressive strength, setting time solubility and X-ray diffraction (XRD) analysis.

Results

The 2% BG/MTA showed higher push-out bond strengths than control group after 7 days of SBF storage. The 2% BG/MTA exhibited the highest compressive strength. Setting times were reduced in the 1 and 2% BG/MTA groups, and solubility of all experimental groups were clinically acceptable. In all groups, precipitates were observed in dentinal tubules via SEM. XRD showed the increased hydroxyapatite peaks in the 2, 5 and 10% BG/MTA groups.

Conclusion

It was verified that the BG-added MTA increased dentin push-out bond strength and compressive strength under SBF storage. The addition of BG did not negatively affect the MTA maturation reaction; it increased the amount of hydroxyapatite during SBF maturation.

Effect of Incorporation of Zeolite Containing Silver-Zinc Nanoparticles into Mineral Trioxide Aggregate on Odontogenic Activity of Human Dental Pulp Stem Cells

STATEMENT OF THE PROBLEM

The stimulation of odontogenic activity is considered an essential property for biomaterials used in vital pulp therapy.

PURPOSE

The present study aimed to evaluate the effect of the incorporation of zeolite containing silver-zinc nanoparticles (Ze-Ag-Zn) into Angelous mineral trioxide aggregate (AMTA) on the odontogenic activity of human dental pulp stem cells (HDPSCs).

MATERIALS AND METHOD

In this in vitro study, HDPSCs were treated with 2% wt of synthesized Ze-Ag-Zn particles+AMTA, AMTA and Ze-Ag-Zn disks. The negative control cells did not receive any treatment. Then, cell viability was measured using the MTT assay after 7 and 14 days of the treatment course. The alkaline phosphatase (ALP) activity and calcium ion level were also measured in the supernatant culture media using auto-analyzer kits. The obtained data were analyzed using one-way ANOVA and Student t-test where appropriate. The level of the statistical significance was set at p< 0.05.

RESULTS

The results indicated that HDPSCs treated with AMTA and AMTA+Ze-Ag-Zn particles did not show any significant cell death compared with the control cells after 14 days of the treatment course while the ALP activity and calcium ion levels were significantly (p< 0.05) elevated. Also, the addition of AMTA particles to the cell culture media resulted in increased ALP activity and calcium ion level compared with HDPSCs treated with AMTA+ Ze-Ag-Zn particles on day 7 of the treatment course (p< 0.05).

CONCLUSION

It seems that the incorporation of Ze-Ag-Zn particles into AMTA did not have any significant positive effect on the biomineralization properties of AMTA.

Physical, Chemical, Mechanical, and Biological Properties of Four Different Commercial Root-End Filling Materials: A Comparative Study

Commercial mineral trioxide aggregate (MTA) materials such as Endocem MTA (EC), Dia-Root Bio MTA (DR), RetroMTA (RM), and ProRoot MTA (PR) are increasingly used as root-end filling materials. The aim of this study was to assess and compare the physicochemical and mechanical properties and cytotoxicity of these MTAs. The film thicknesses of EC and DR were considerably less than that of PR; however, RM’s film thickness was greater than that of PR. In addition, the setting times of EC, DR, and RM were shorter than that of PR (p < 0.05). The solubility was not significantly different among all groups. The three relatively new MTA groups (EC, DR, and RM) exhibited a significant difference in pH variation and calcium ion release relative to the PR group (p < 0.05). The radiopacity of the three new MTAs was considerably less than that of PR. The mechanical strength of RM was not significantly different from that of PR (p > 0.05); however, the EC and DR groups were not as strong as PR (p < 0.05). All MTA groups revealed cytocompatibility. In conclusion, the results of this study confirmed that EC, RM, DR, and PR exhibit clinically acceptable physicochemical and mechanical properties and cell cytotoxicity.

Effect of Incorporating Hydroxyapatite and Zinc Oxide Nanoparticles on the Compressive Strength of White Mineral Trioxide Aggregate

Statement of the Problem

Many efforts have been made to improve the properties of mineral trioxide aggregate (MTA), including the incorporation of nanoparticles.

Purpose

The aim of this study was to investigate the incorporation of zinc oxide and hydroxyapatite nanoparticles on the compressive strength of white MTA (WMTA).

Materials and Method

In this in vitro study, the following materials were evaluated: MTA, MTA+5% zinc oxide (ZnO) nanoparticles, MTA+10% zinc oxide nanoparticles, MTA+5% hydroxyapatite (HA) nanoparticles, MTA+10% zinc oxide nanoparticles. The compressive strength of the groups under investigation was measured on days 4 and 21 after mixing the MTA using a universal testing machine. Two-way ANOVA test was used to compare the groups and determine the significance of the effect of time and material on the compressive strength (p<0.05).

Results

The highest and lowest compressive strength values were respectively measured for the second group, MTA/21 days, and the fourth group, MTA+Nano ZnO/4 days. Two-way ANOVA indicated that incorporation of zinc oxide and hydroxyapatite nanoparticles into MTA did not have a significant effect on compressive strength (p= 0.05). Compressive strength in all the groups increased over time from day 4 to day 21. However, this increase was not statistically significant (p= 0.06) except for the MTA group, which exhibited significant increase in compressive strength over time from day 4 to day 21 (p=0.007).

Conclusion

Incorporation of HA and ZnO nanoparticles into MTA had no detrimental effects on its strength and these nanoparticles can be used to improve the other properties of MTA.

Biocompatibility of a New Antibacterial Compound and its Effect on the Mechanical Properties of Flowable Dental Composites (Animal Study)

STATEMENT OF THE PROBLEM

Recently, new compound of 3, 5-dimethyl-1-thiocarboxamide pyrazole has been composed with excellent antibacterial property. Biocompatibility and its effects on mechanical properties of dental composites should be considered before clinical use.

PURPOSE

The purpose of this study was to evaluate the biocompatibility of 3, 5-dimethyl-1-thiocarboxamide pyrazole as a new antibacterial compound and its effect on the mechanical properties of dental composites.

MATERIALS AND METHOD

In this experimental study, a new antibacterial compound was synthesis by reaction between Thiosemicarbazide and 2, 4-Pentandione and tested on thirty male albino Wistar rats weighting 200-250gr. Rats were randomly divided into 3 groups of 10, each rat received 3 implants of 3,5-dimethyl-1-thiocarboxamide pyrazole, penicillin v and empty polyethylene tube. A pathologist, who was unaware of types of tested materials and timing, performed the examination of specimens. The depth of cure and flexural strength of resin composite was measured using Iso4049 standard technique. Compressive strength was determined according to Iso9917 standard.

RESULTS

This compound was biocompatible and there was no significant difference in flexural strength and compressive strength of the composites containing 1% of this compound with the control group (p> 0.05).

CONCLUSION

The 3, 5-dimethyl-1-thiocarboxamide pyrazole with a concentration of 1% in flowable composites can be very effective in preventing secondary caries.

Does Adding Various Accelerators to Mineral Trioxide Aggregate Have a Negatively Effect on Push-Out Bond Strength?

OBJECTIVE

This study compares the effect of the white mineral trioxide aggregate (WMTA) accelerators, including disodium hydrogen orthophosphate (Na2HPO4; 2.5 wt%), calcium chloride (CaCl2; 5 and 10 wt%), and KY jelly, on the push-out bond strength of WMTA. The null hypothesis was that the WMTA accelerators would not affect the push-out bond strength of WMTA.

MATERIALS AND METHODS

Slices (2-mm-thick) were obtained from 75 human mandibular molar distal roots. The slices were enlarged up to size 6 Gates-Glidden burs to obtain a 1.5-mm canal diameter. The slices were randomly divided into 4 experimental groups and a control group (n = 15 in each group). Freshly prepared WMTA mixture was placed into the root slices and stored at 37°C in a 100% humidified atmosphere for 60 days. The force required to dislodge the WMTA cement from the root slice was determined using a universal testing machine. The push-out bond strength was calculated.

RESULTS

Push- out bond strength of 5- and 10-wt% CaCl2, and 2.5-wt% Na2HPO4 WMTA groups was significantly lower than in the KY-jelly and control groups (p < 0.05). The mean push-out bond strength of KY jelly was lower than in the control group but not statistically significant.

CONCLUSION

The addition of KY jelly to WMTA did not have an adverse effect on the push-out bond strength of WMTA, in contrast to the other accelerators, including Na2HPO4 and CaCl2, which reduced the push-out bond strength.

Treatment of severe periodontic-endodontic combined lesions with minocycline hydrochloride ointment combined with mineral trioxide aggregate

Periodontic-endodontic combined lesions affect the quality of life of patients. The present study aimed to explore a way to achieve maximal effect in treating periodontic-endodontic combined lesions by using a combination of minocycline hydrochloride ointment (MHO) and mineral trioxide aggregate (MTA). In the present study, 294 patients were randomly divided into four groups: Control group, MHO group, MTA group and combination group. Endodontic and periodontic therapy was applied simultaneously on the anterior and posterior teeth of patients, and patient characteristics, gingival index (GI) and probing depth (PD) were noted when the patients were treated with the different strategies. Reexamination was performed 4 weeks after treatment and follow-up was performed 2 years later. The present study demonstrated that medical history, root filling and periapical condition within the patients were deemed as key factors in determining the success of treatment of periodontic-endodontic combined lesions. The effect of the combination treatment significantly exceeded that of either treatment alone (P<0.05). In addition, the teeth were significantly improved for patients with pathological types I, II and III in the combination group compared with either treatment group alone (P<0.05). Furthermore, compared with the MTA and MHO groups alone, the combination group demonstrated a significant decrease in PD and GI in severe periodontic-endodontic combined lesions. In conclusion, the present findings implied that combination treatment is significantly superior to single treatments applied to patients with severe periodontic-endodontic combined lesions.

Mineral trioxide aggregate enriched with iron disulfide nanostructures: an evaluation of their physical and biological properties

The purpose of this study was to characterize mineral trioxide aggregates (MTA) enriched with iron disulfide (FeS₂ ) nanostructures at different concentrations, and to investigate their storage modulus, radiopacity, setting time, pH, cytotoxicity, and antimicrobial activity. Iron disulfide nanostructures [with particle size of 0.357 ± 0.156 μm (mean ± SD)] at weight ratios of 0.2, 0.4, 0.6, 0.8, and 1.0 wt% were added to white MTA (wMTA). The radiopacity, rheological properties, setting time, and pH, as well as the cytotoxicity (assessed using the MTT assay) and antibacterial activity (assessed using the broth microdilution test) were determined for MTA/FeS₂ nanostructures. The nanostructures did not modify the radiopacity values of wMTA (~6 mm of aluminium); however, they reduced the setting time from 18.2 ± 3.20 min to 13.7 ± 1.8 min, and the storage modulus was indicative of a good stiffness. Whereas the wMTA/FeS₂ nanostructures did not induce cytotoxicity when in contact with human pulp cells (HPCs) and human gingival fibroblasts (HGFs), they showed bacteriostatic activity against Staphylococcus aureus, Escherichia coli, and Enterococcus faecalis. Adding FeS₂ nanostructures to MTA might be an option for improving the root canal sealing and antibacterial effects of wMTA in endodontic treatments.

Compressive Strength of Mineral Trioxide Aggregate with and without Disodium Hydrogen Phosphate at Different Mixing Ratios

Introduction

Mineral Trioxide Aggregate (MTA) is a substance with favorable physical-mechanical properties. Disodium hydrogen phosphate (DHP) is sometimes added to MTA to reduce its setting time. Therefore, this study was conducted to evaluate the effect of various ratios of liquid to powder of white MTA (WMTA) and addition of DHP on its compressive strength.

Methods and Materials

One hundred and twenty samples were prepared with a two-piece stainless steel mold with a height of 6 mm and a diameter of 4 mm in order to evaluate the compressive strength where WMTA was used in 60 samples and DHP in white MTA composition (DHPWMTA) was used in other 60 samples. The compressive strength of WMTA and DHPWMTA was measured in various ratios of liquid to powder including 50, 60 and 70% and at 24 h and 21 days (n=10). Univariate Analysis of Variance test with SPSS 16 software were used to determine the difference between groups. The level of significance was set at 0.05.

Results

The maximum and minimum compressive strength of WMTA groups were 63.25±1.96 (50% ratio and 21 days) and 37.79±1.28 (70% ratio and 24 h), respectively. The maximum and minimum compressive strength of DHPWMTA groups were 63.96±1.40 (60% ratio and 21 days) and 37.37±1.62 (70% ratio and 24 h), respectively. The effect of each of factors (type of material, powder to liquid ratio and time) alone were significant on the compressive strength (P<0.05). However, the interactive effect of three factors (type of material, powder to liquid ratio and time) were not statistically significant on compressive strength (P>0.05).

Conclusion

Adding 2.5 wt% of DHP to white MTA increased samples compressive strength. Compressive strength in liquid to powder ratios of 50 and 60% compare to 70% and at 21 days compared to 24 h was high.

Interaction of backfilling techniques and MTA plugs with additives: Fracture strength and adaptation analyses

The aims were to evaluate the effects of different additives on the adaptation of mineral trioxide aggregate (MTA) plugs before and after different backfilling techniques and analyze the interference of filling procedures on the fracture resistance of simulated immature teeth. The apical parts of 60 teeth were filled with MTA mixed with distilled water (DW), propylene glycol (PG) or calcium chloride (CaCl₂) and backfilled with cold lateral condensation (CLC) or warm vertical compaction (WVC). The specimens were subjected to adaptation analysis and fracture testing. CaCl₂ addition resulted in poor marginal adaptation, while PG addition significantly decreased the fracture values (p<0.05). WVC technique negatively affected the marginal adaptation of MTA-CaCl₂ plugs and decreased the fracture values of teeth with MTA-PG plugs (p<0.05). Mixing MTA with DW can be recommended as apical plug when the remaining root canal space is going to be filled with either CLC or WVC techniques.

White mineral trioxide aggregate mixed with calcium chloride dihydrate: chemical analysis and biological properties

OBJECTIVES

This study aimed to evaluate the chemical and biological properties of fast-set white mineral trioxide aggregate (FS WMTA), which was WMTA combined with calcium chloride dihydrate (CaCl₂·2H₂O), compared to that of WMTA.

MATERIALS AND METHODS

Surface morphology, elemental, and phase analysis were examined using scanning electron microscope (SEM), energy dispersive X-ray microanalysis (EDX), and X-ray diffraction (XRD), respectively. The cytotoxicity and cell attachment properties were evaluated on human periodontal ligament fibroblasts (HPLFs) using methyl-thiazol-diphenyltetrazolium (MTT) assay and under SEM after 24 and 72 hours, respectively.

RESULTS

Results showed that the addition of CaCl₂·2H₂O to WMTA affected the surface morphology and chemical composition. Although FS WMTA exhibited a non-cytotoxic profile, the cell viability values of this combination were lesser than WMTA, and the difference was significant in 7 out of 10 concentrations at the 2 time intervals (p < 0.05). HPLFs adhered over the surface of WMTA and at the interface, after 24 hours of incubation. After 72 hours, there were increased numbers of HPLFs with prominent cytoplasmic processes. Similar findings were observed with FS WMTA, but the cells were not as confluent as with WMTA.

CONCLUSIONS

The addition of CaCl₂·2H₂O to WMTA affected its chemical properties. The favorable biological profile of FS WMTA towards HPLFs may have a potential impact on its clinical application for repair of perforation defects.

Effect of Oral Tissue Fluids on Compressive Strength of MTA and Biodentine: An In vitro Study

INTRODUCTION

Over the past many years various root end filling materials have been used which have been tested for their physical properties but each of them had certain limitations. In clinical practice, root end filling materials are exposed to oral tissue fluids which may compromise their longevity.

AIM

The aim of this study was to investigate the effects of oral tissue fluids on compressive strength of Mineral Trioxide Aggregate (MTA) and biodentine.

MATERIALS AND METHODS

MTA and biodentine cylinders measuring 6 mm × 4 mm were prepared using acrylic blocks. They were divided into six groups; (Group 1) (MTA) (n=3), (Group 2) MTA contaminated with saliva, (MTA-S) (n=3), Group 3: MTA contaminated with blood, MTA-B (n=3), Group 4: Biodentine (BD), Group 5: Biodentine contaminated with saliva (BD-S) (n=5), Group 6: Biodentine contaminated with blood (BD-B) (n=5). The mould was contaminated with saliva and blood and incubated at 37°C at 100% humidity for three days and compressive strength (MPa) was measured using universal testing machine and the data was analyzed statistically using one-way ANOVA test.

RESULTS

There was no significant difference in the compressive strength between the three groups i.e., MTA, MTA-S, MTA-B (p > 0.05). However, there was higher compressive strength in the MTA-B group when compared to MTA and MTA-S. Also, there was no statistical significant difference between BD, BD-S, BD-B (p>0.05).

CONCLUSION

This study showed that the compressive strength of MTA and biodentine was not adversely affected by contamination with oral tissue fluids like blood and saliva.

Zeolite-silver-zinc nanoparticles: Biocompatibility and their effect on the compressive strength of mineral trioxide aggregate

BACKGROUND

This study was carried out to evaluate the biocompatibility of zeolite-silver-zinc (Ze-Ag-Zn) nanoparticles and their effect on the compressive strength of Mineral Trioxide Aggregate (MTA).

MATERIAL AND METHODS

Biocompatibility was evaluated by an MTT assay on the pulmonary adenocarcinoma cells with 0.05, 0.1, 0.25, 0.5, 1 and 5 mg/mL concentrations of Ze-Ag-Zn. For compressive strength test, four groups containing 15 stainless-steel cylinders with an internal diameter of 4 and a height of 6 mm were prepared and MTA (groups 1 and 2) or MTA + 2% Ze-Ag-Zn (groups 3 and 4) were placed in the cylinders. The compressive strength was evaluated using a universal testing machine 4 days after mixing in groups 1 and 3, and 21 days after mixing in groups 2 and 4.

RESULTS

There was no significant difference between cytotoxicity of different concentrations. The highest (52.22±18.92 MPa) and lowest (19.57±5.76 MPa) compressive strength were observed in MTA group after 21 days and in MTA + 2% Ze-Ag-Zn group after four days, respectively. The effect of time and 2% Ze-Ag-Zn on the compressive strength were significant (P<0.05). Mixing MTA with Ze-Ag-Zn significantly reduced and passage of time from day four to 21 significantly increased the compressive strength.

CONCLUSIONS

Mixing MTA with 2% Ze-Ag-Zn had an adverse effect on the compressive strength of MTA, but this combination had no cytotoxic effects. Key words:Compressive strength, Cytotoxicity, Mineral Trioxide Aggregate, Nanoparticle, Zeolite-Silver-Zinc.

Effect of the TiO2 nanoparticles on the selected physical properties of mineral trioxide aggregate

Background

Some of the efforts to improve the properties of Mineral Trioxide Aggregate (MTA) include incorporation of some nanoparticles such as Titanium dioxide (TiO2). The aim of this study was to evaluate the effect of TiO2 nanoparticles on the setting time, working time, push-out bond strength and compressive strength of MTA.

Material and Methods

The physical properties to be evaluated were determined using the ISO 6786:2001 and 9917 specifications. Fifteen samples of each material (MTA or MTA with 1% weight ratio of TiO2 Nanoparticles) were prepared for any evaluated physical property. Data were analyzed using descriptive statistics and T-test. Statistical significance was set at P<0.05.

Results

There was the significant effect of the material type (presence and absence of TiO2 nanoparticles) on the push-out bond strength, compressive strength, working time and setting time, with significantly higher values achieved in the group with TiO2 nanoparticles than the group without these particles (P=0.01 for the setting time and compressive strength, P=0.03 for the working time and P=0.001 for the bond strength).

Conclusions

Based on the findings of this in vitro study, incorporation of the TiO2 nanoparticles with weight ratio of 1% increased the setting time, working time, compressive strength and push out bond strength of MTA.

Key words:Mineral trioxide aggregate, nanoparticles, physical properties, titanium dioxide.

Evaluation of Properties of Mineral Trioxide Aggregate with Methyl Cellulose as Liquid

OBJECTIVES

Mineral trioxide aggregate (MTA) is extensively used in endodontics. However, MTA is difficult to handle because of its granular consistency, low mechanical properties and initial looseness. The objective of this study was to assess the compressive strength (CS), diametral tensile strength (DTS), and pH of set MTA using methyl cellulose as liquid.

MATERIALS AND METHODS

White ProRoot MTA was used as the control group; modified MTA cement was prepared by mixing Portland cement, bismuth oxide and calcium sulfate (75%, 20% and 5%, respectively) as the experiment group. Methyl cellulose was used as hydrating liquid and compared with distilled water. The data were analyzed by two-way ANOVA.

RESULTS

The pH values of modified MTA cement set using deionized water and methyl cellulose were slightly, but not significantly, different (P>0.05). The DTS and CS tests for modified MTA cement hydrated with methyl cellulose showed a significant difference at one day and one week (P<0.05).

CONCLUSIONS

The results suggest that using methyl cellulose as the hydrating liquid enhances some mechanical properties but does not compromise pH of white ProRoot MTA.