Evaluation of arch width variations among different skeletal patterns in South Indian population

Comparative evaluation of arch form among the Nepalese population: A morphological study

Aims

The study aims to identify sexual dimorphic features in the arch patterns based on tooth arrangement patterns and the maxillary and mandibular arches using Euclidean Distance Matrix Analysis (EDMA).

Settings and Design

A total of 96 Nepalese subjects, aged 18 to 25 were assessed using casts and photographs.

Materials and Methods

Thirteen landmarks representing the most facial portions of the proximal contact areas on the maxillary and mandibular casts were digitised. Seventy-eight possible, Euclidean distances between the 13 landmarks were calculated using the Analysis ToolPak of Microsoft Excel®. The male-to-female ratios of the corresponding distances were computed and ratios were compared to evaluate the arch form for variation in the genders, among the Nepalese population.

Statistical Analysis Used

Microsoft Excel Analysis ToolPak and SPSS 20.0 (IBM Chicago) were used to perform EDMA and an independent t-test to compare the significant differences between the two genders.

Results

The maxillary arch's largest ratio (1.008179001) was discovered near the location of the right and left lateral incisors, indicating that the anterior region may have experienced the greatest change. The posterior-molar region is where the smallest ratio was discovered, suggesting less variation. At the intercanine region, female arches were wider than male ones; however, at the interpremolar and intermolar sections, they were similar in width. Females' maxillary arches were discovered to be bigger antero-posteriorly than those of males. The highest ratio (1.014336113) in the mandibular arch was discovered at the intermolar area, suggesting that males had a larger mandibular posterior arch morphology. At the intercanine area, the breadth of the arch form was greater in males and nearly the same in females at the interpremolar and intermolar regions. Female mandibular arch forms were also discovered to be longer than those of males from the anterior to the posterior.

Conclusions

The male and female arches in the Nepalese population were inferred to be different in size and shape. With references to the landmarks demonstrating such a shift, the EDMA established objectively the presence of square arch forms in Nepali males and tapering arch forms in Nepalese females.

Analysis of the Facial Measurements and Dental Arch Dimensions for the Construction of Dental Prostheses among Adult Yemenis

AIM

To investigate the dental arch dimension (width, length, and height) and facial measurements including inner-canthal width (ICW), bizygomatic width (BZW), inter-alar width (IAW), and mouth width (MW), and to assess the correlation between these facial measurements and dental arch width (canine width [CW], inter-first premolar width [I1PW], and inter-first molar width [I1MW]), to establish a preliminary reference for artificial teeth selection in Yemeni adult.

MATERIALS AND METHODS

The study included 80 individuals (40 males and 40 females) with symmetrical faces and normal class I occlusion ranging in age from 20 to 35. Maxillary and mandibular stone casts were made for each individual. The dimensions of dental casts and facial measurements, including ICW, BZW, IAW, and MW, were assessed using a digital caliper. The collected data were analyzed by using the SPSS software program. The descriptive statistics for each measurement were made. Differences between males and females were tested using an independent-sample t-test with p-values below 0.05 considered significant. Pearson correlation coefficient between facial measurements and dental arch width was also done.

RESULTS

Most dental arch dimensions and facial measurements exhibited larger mean values in the male than in the female group, with the greatest significant difference in the maxillary dental arch width and the lowest in mandibular dental arch length. A highly significant correlation is observed between ICW and maxillary canine width (CW) (r = 0.318, p = 0.004). In contrast, no significant correlation between dental arch width and BZW, IAW, and MW is shown.

CONCLUSIONS

Within this study's limitations, the ICW can determine the ideal dimension of the artificial teeth in the anterior maxillary arch. While the other facial parameters, including BZW, IAW, and MW, cannot be used for artificial teeth selection in Yemeni populations.

CLINICAL SIGNIFICANCE

The findings of this study established a reference database of facial measurements and their correlation to dental arch and teeth width in Yemeni populations. So, it can be implemented in artificial teeth and dental prostheses design and construction.

Comparison of Alveolar Bone Thickness, Sagittal Root Positions, and Arch Forms in Class I, II, and III Malocclusions: A Cephalometric Study

OBJECTIVE

This retrospective study aimed to evaluate the sagittal root position, arch shapes, and alveolar bone thickness in classes I, II, and III of skeletal patterns.

MATERIAL AND METHODS

Alveolar bone thickness, sagittal root placements, and arch morphologies in classes I, II, and III malocclusions were measured using 30 study models and 30 lateral cephalograms, both with a mean age of 16.5 years. Based on their sagittal relations, 30 participants were classified into three groups each (classes I, II, and III). The ANOVA test was used to calculate the results.

RESULTS

Between the three classes, there were statistically significant differences in the AP jaw relationship and root placements. Sagittal root location and dental arch shape showed no statistically significant correlation.

CONCLUSION

There was no correlation between the dental arch form and sagittal root position, and classes II and III were found to have higher mandibular incisor inclination. On all levels, oval arch forms were prevalent.

Substantial Improvements in Facial Morphology through Surgical-Orthodontic Treatment: A Case Report and Literature Review

Background and Objectives: The long face type is associated with excessive vertical facial growth and most often with anterior open bite. In many cases of anterior open bite of high severity associated with bimaxillary dento-alveolar protrusion, lips are unable to form an adequate seal at rest. This leads to many issues, including facial dysmorphism. The aim of this study was to describe the case of a 15 year old girl who addressed the orthodontist in November 2015, having complaints related to the skeletal and dental open bite. Case Description: A 15.7 year old patient required a consultation with the orthodontic service for impaired dento-facial aesthetics at rest, smile and speech due to an exaggerated superior protrusion of the upper frontal teeth, labial incompetence with excessive gingival exposure at rest and smile associated with upper and lower anterior teeth crowding. The orthodontic diagnostic consisted of skeletal open bite with a hyperleptoprosop morphological facial type, high degree of hyperdivergence, bimaxillary dento-alveolar protrusion, 7 mm skeletal open-bite, 3 mm vertical inocclusion of the anterior teeth, skeletal class II relationships, bilateral half cusp class II molar and canine relationships, labial incompetence, highly increased interlabial gap, facial asymmetry, excessive gingival exposure of 7 mm at smiling and bimaxillary anterior crowding. Because the patient initially refused orthognathic surgery, prior to starting the orthodontic treatment, the patient was recommended to receive a bilateral extraction of the first upper premolars. Key objectives of pre-surgical orthodontic treatment were to achieve a retroclined position of the upper incisors under their normal inclination for the planned upward maxillary rotation, to maintain slightly lower incisor proclination. The orthognathic surgery consisted of Le Fort I impaction osteotomy with 8 mm anterior impactation, bilateral sagittal split osteotomy, and mandibular repositioning using occlusal splint. Conclusions: At the end of the orthodontic-surgical treatment, the patient presented significant improvement in dento-facial aesthetics, and optimal skeletal, muscular and dental balance.

The relationship of maxillary arch dimension with vertical facial morphology in proto-malay race

OBJECTIVE:

DESIGN:

SETTING:

PARTICIPANTS:

METHODS:

RESULTS:

CONCLUSION:

Maxillary width and hard palate thickness in men and women with different vertical and sagittal skeletal patterns

INTRODUCTION

The objective of this research was to compare maxillary width and hard palate thickness in men and women with different vertical and sagittal skeletal patterns.

METHODS

A total of 241 adults (93 men and 148 women aged from 18 to 25 years) were divided into male and female groups. Subjects were then separately divided into 3 sagittal skeletal groups and 3 vertical skeletal groups. A lateral cephalogram and a cone-beam computed tomography were taken for each subject. We measured the parameters to make statistical analyses and compared them between the different groups.

RESULTS

Women had smaller craniomaxillofacial bone width and palatal thickness than men. In sagittal groups, maxillary width, maxillary alveolar width, and external temporomandibular joint fossa width in Class II and Class III malocclusion groups were smaller than in the Class I group for both women and men. The internal temporomandibular joint fossa width was the same results in men and women. In vertical groups, palate thickness, maxillary width, and maxillary alveolar width of the high-angle group were smaller than those of the low-angle group, regardless of sex.

CONCLUSIONS

To an extent, maxillary width is correlated with vertical and sagittal skeletal patterns, and insufficient maxillary width would lead to unfavorable skeletal patterns. Differences exist in the morphology of craniomaxillofacial bone between men and women. Therefore, these findings can provide clinicians with references for differential diagnosis and treatment plans.

Factors influencing different types of malocclusion and arch form-A review

AIM

This review intends to highlight malocclusion as a multifactorial issue and review the different factors that influence different types of malocclusion and arch form.

METHODS

An online article search was performed on the factors influencing malocclusion and arch form from January 1990 through April 2020. The search was performed within the Google, Rutgers library, PubMed, MEDLINE databases via OVID using the keywords mentioned in the PubMed and MeSH headings for the English language published articles January 1990 through April 2020, which evaluated different factors that influence malocclusion and arch form.

RESULTS

Of the 300 articles found in initial search results, 31 articles met the inclusion criteria set for this review. These 31 studies were directly related to the factors that impact malocclusion and different arch forms.

CONCLUSION

Genetic inheritance, genetic mutations, age, gender, ethnicity, dental anomalies like macrodontia, congenital diseases, muscular diseases, hormone imbalance, and human behaviour are all factors that influence malocclusion and arch forms. The elements within the individual's control like behaviours can aid in preventing malocclusion. However, it seems as if the underlying reason for most of these factors indicates that malocclusion is a by-product of genetics and pathology.

Differences in dental arch characteristics between genders in patients with suspected condylar hyperplasia in a North Sumatra subpopulation: a cross-sectional study

Background: Condylar Hyperplasia (CH) is a self-limiting mandibular condyle disorder that shows asymmetry progress in conjunction with associated occlusal changes as long as condylar growth is still active and leads to facial asymmetry. This study aimed to analysis the difference of dental arch characteristics  based on genders in orthodontic patients with suspected CH in a North Sumatra subpopulation.

Methods: This is a retrospective study of suspected CH patient’s clinical records who sought for the initial orthodontic treatment between January 2015 to March 2019. Patient with facial asymmetry (based on photography, posterior crossbite and midline deviation), the positive temporomandibular joint disorder in functional analysis, and no history of facial trauma were included in the study. Dental arch asymmetry was based on the measurement of dental midline deviation, canine tip in the dental arch, the distance of the upper canines from the palatal suture, and inter canine distance. The evaluation of dental arch was achieved by comparing arch width and length.

Results: There was a significant difference (p<0.05) of upper canine distance from the palatal suture in female patients when evaluating upper dental arch asymmetry. There was a moderate correlation (r=0.379) in midline deviation between upper and lower dental arch. The dimension and dental arch form were mid and flat, and there was moderate correlation (r=0.448) between the upper and lower dental arch form in these suspected CH patients.

Conclusion: Indeed skeletal asymmetry, the evaluation of the dental arch characteristic symmetry and arch form showed asymmetric occlusal characteristics in orthodontics patient with suspected  CH in the North Sumatera subpopulation. In treating these patients, we recommend the plaster cast evaluation as essential and routine procedure in order to understand the complexity of occlusal change due to active growth of condylar and limitation in radiography evaluation.

Clinical evaluation of neodymium-iron-boron (Ne2Fe14B) rare earth magnets in the treatment of mid line diastemas

Background

To evaluate the closure of midline diastema using the Neodymium-Iron-Boron magnets and to compare the treatment duration of midline diastemas with the use of magnets compared to regular orthodontic treatment.

Material and Methods

Thirty patients with age group 12 to 30 years with the midline diastema ranging from 0.5 to 3mm were selected. These patients were divided into two groups. Diastema closure in one group was accomplished by conventional method, in other group was done with Ne2Fe14B magnets. These magnets were fitted to the labial surfaces of the maxillary central incisors such a way that the opposite poles of the magnets face each other. At each appointment, study models and radiographs were taken for study subjects and the midline diastema was measured using digital vernier calipers on the study models obtained. Descriptive statistics carried out using Paired t-test.

Results

Subjects treated with Ne2Fe14B magnets showed a significant difference compared to fixed orthodontic appliance subjects with respect to time of closure, rate of space closure and incisal inclination. Significant difference between 2 groups with reduction of 64.6 days in time to diastema closure in subjects treated with Ne2Fe14B magnets (P<0.05).

Conclusions

Ne2Fe14B magnets more efficient in complete closure of mid line diastema in less duration of time.

Key words:Midline diastema, Ne2Fe14B magnets, rare earth magnets, space closure.