Esthetic rehabilitation of anterior teeth with different thicknesses of porcelain laminate veneers: An 8-year follow-up clinical evaluation

Fracture resistance of ultratranslucent multilayered zirconia veneers with different facial thicknesses

To assess the fracture resistance of computer-aided design and computer-aided manufacturing (CAD/CAM) ultratranslucent multilayered zirconia (5Y-YZP) veneers with varying facial thickness. Sixty translucent zirconia veneers were designed and milled using a chairside CAD/CAM system for maxillary central incisors. The butt joint incisal veneer tooth preparations consisted of 1.00 mm incisal reduction, 0.40 mm chamfer margin, and three different facial reductions; 0.50, 0.75, and 1 mm, respectively. The ceramic veneers were cemented to printed resin dies and subjected to thermal cycling. Subsequently, the restorations were loaded with compressive loading force, and fracture occurrences were recorded. Scanning electron microscope (SEM) images of the fractured specimens were captured. The fracture resistance varied among the veneers with different facial thicknesses. Ultratranslucent zirconia veneers with a facial thickness of 1.00 mm exhibited the highest fracture resistance values (742.15 N), followed by those with 0.75 mm facial thickness (673 N). Minimally invasive veneers with 0.50 mm thickness displayed similar fracture resistance as thicker veneers with 0.75 mm. However, veneers with 1.00 mm thickness displayed the highest values. SEM fracture patterns for 0.50 and 0.75 mm display similar and fewer crack lines than 1.00 mm veneers. RESEARCH HIGHLIGHTS: Minimally invasive zirconia veneers exhibit similar fracture resistance to thicker veneers.

Two-year evaluation of porcelain laminate veneers using FDI criteria

PURPOSE

The use of porcelain laminate veneers (PLVs) is a minimally invasive technique that is often used in restorative dentistry due to esthetic considerations. The aim of this study was to evaluate PLVs according to the Fédération Dentaire Internationale (FDI) World Dental Federation clinical criteria.

MATERIALS AND METHODS

This clinical study included 11 patients (7 female and 4 male) who had been admitted to the Uşak University Faculty of Dentistry between February 2019 and February 2021. Before taking part in the study, patients were informed about alternative treatment procedure options. A total of 30 PLVs were fabricated and cemented, and patients were evaluated according to the FDI criteria (with a follow-up after 2 years).

RESULTS

Restorations were evaluated by two trained researchers. During the follow-up evaluation, no fractures or cracks were observed in any restoration. Further, 73% (n = 22) of the PLVs had perfect marginal adaptation and only 27% (n = 8) had small marginal fractures that could be removed by polishing. Moreover, 57% (n = 17) of the PLVs were evaluated as a good color match (no difference in shade and/or translucency), whereas 33% (n = 13) had only minor deviations. In periodontal examinations, 23% (n = 7) of the PLVs had no plaque, inflammation, or pockets, whereas 77% (n = 23) had minor plaque inflammation and no pocket development.

CONCLUSIONS

As there were no fractures, fails, or need for removal of the restorations after 2 years, PLVs showed clinically satisfactory performance. The performance of PLVs can be considered highly favorable due to the minimally invasive and periodontally-compatible nature, with a good color match when carefully planned.

Substrate Rigidity Effect on CAD/CAM Restorations at Different Thicknesses

OBJECTIVES

 This article evaluated the effect of substrates rigidities on the post-fatigue fracture resistance of adhesively cemented simplified restorations in lithium disilicate glass ceramic.

METHODS

 Precrystalized computer-aided design/computer-aided manufacturing ceramic blocks were processed into disc-shaped specimens (n = 10, Ø = 10 mm), mimicking a simplified restoration at two thicknesses (0.5 and 1.0 mm). Thereafter, the discs were cemented onto different base substrates (dentin analogue [control], dentin analogue with a central core build-up of resin composite [RC], or glass ionomer cement [GIC]). The specimens were subjected to mechanical cycling in a chewing simulator (100 N, 1 × 106 cycles, 4 Hz) and then subjected to thermocycling aging (10,000 cycles, 5/37/55°C, 30 seconds). After the fatigue protocol, the specimens were loaded until failure (N) in a universal testing machine. Finite element analysis calculated the first principal stress at the center of the adhesive interface.

RESULTS

 The results showed that "restoration thickness," "type of substrate," and their interaction were statistically significant (one-way analysis of variance; p < 0.001). Regardless the restoration thickness a higher fracture load was observed for specimens cemented to dentin analogue. Among the base materials, RC build-up presented the highest fracture load and lower stress magnitude for both restoration thicknesses in comparison with GIC build-up. The 0.5-mm restoration showed higher stress peak and lower fracture load when submitted to the compressive test.

CONCLUSION

 More flexible base material reduces the fracture load and increases the stress magnitude of adhesively cemented lithium disilicate restorations regardless the ceramic thickness. Therefore, more rigid substrates are suggested to be used to prevent restoration mechanical failures.

Noninvasive Proximal Adhesive Restoration in the Treatment of Non-cavitated Interproximal Incipient Carious Lesions: A Case Report

The noninvasive proximal adhesive restoration (NIPAR) technique is a noninvasive approach that utilizes a one-component universal adhesive for infiltration and a filled flowable resin for impermeable sealing. This technique offers several benefits. The noninvasive treatment approach is particularly significant in restorative dentistry, as it entails identifying and managing caries in their initial phases. The efficacy of the noninvasive proximal adhesive restoration technique is limited to non-cavitated lesions. In this case report, a 24-year-old male patient with no relevant medical conditions with a history of dental extractions and restorations visited the University of Geneva Dental School for a complete dental check-up. Orthopantomogram (OPG) and bitewing radiographs revealed multiple initial proximal caries in teeth # 37 (mesial), # 36 (mesial & distal), and # 35 (distal). In addition, DIAGNOcam (KaVo) was used as a diagnostic tool to establish proximal caries' progression. After discussing treatment options with the patient, a decision was made to treat the lesions at the enamel level using NIPAR.

Retrospective clinical evaluation of a no-prep porcelain veneer protocol

STATEMENT OF PROBLEM

Porcelain laminate veneers without tooth preparation (no-prep veneers) might represent a convenient and conservative option for the esthetic rehabilitation of anterior teeth. However, controversy exists about their predictability.

PURPOSE

The purpose of this clinical study was to retrospectively evaluate the performance of no-prep porcelain veneers placed as per the recently proposed "CH no-prep" protocol, which claimed to overcome many of the drawbacks of previous no-prep veneer solutions.

MATERIAL AND METHODS

One hundred eight no-prep porcelain laminate veneers based on the CH no-prep protocol were placed in 21 patients between 2015 and 2017. All participants were contacted, and 15 received a recall examination: a total of 78 veneers were evaluated as per the Clinical-Photographic-Micromorphologic coding. Plaque and gingival indexes and any increase in gingival recession were recorded. Pulp vitality was verified. A survival rate based on the count of absolute failures and a success rate summarizing the effect of both absolute and relative failures were calculated.

RESULTS

The mean observation period was 43.1 months, with an observation interval of 36 to 60 months and a survival rate of 97.4%. From the 5 relative failures (3 minimal fractures or chips and 2 limited marginal discolorations) and the 2 absolute failures (unrepairable fractures), an overall success rate of 91.0% was recorded, with 71 restorations that were judged excellent in terms of clinical acceptance after the recall examination. From the Clinical-Photographic-Micromorphologic evaluation, 5 restorations (6.4%) showed minimal issues for marginal integrity, while a limited porcelain overhang was identified on 2 restorations (2.8%). Micromorphologic analyses confirmed the clinical evaluations. No periodontal recession was observed, and plaque and gingival indexes appeared stable.

CONCLUSIONS

Porcelain laminate veneers placed as per the CH no-prep protocol demonstrated excellent performances after 36 to 60 months of clinical service. The achieved outcomes, in terms of color match and overall esthetic and anatomic integration, confirmed that a prepless approach may be safely adopted provided that strict rules for patient selection and finish line placement are adopted.

Digital image analysis of fluorescence of ceramic veneers with different ceramic materials and resin cements

The objective of this study was to analyze the effect of the type of ceramics and resin cements on the fluorescence of ceramic veneers under the 405 nm UV-light by digital imaging. One hundred and ninety-two veneers were fabricated using three types of ceramics (IPS e.max CAD, IPS Empress CAD, and Zenostar). Eight pieces of substrates were made of resin-nano-ceramic (Lava Ultimate). The level of fluorescence for each sample cemented with the substrate using three kinds of resin cements (RelyX U200, Variolink N, and Choice 2) was analyzed by using histogram data of luminosity from Adobe Photoshop software. Furthermore, the fluorescence values were evaluated by two-way ANOVA and Tukey's test. The highest fluorescence values were observed for the IPS e.max CAD cemented with Choice 2 cement, followed by IPS Empress CAD, and Zenostar the lowest. The final fluorescence intensity of ceramic veneer is affected by ceramic materials and resin cements.

Comparison of Two Types of Preparation for Laminate Veneer with Three Types of All-Ceramic Materials

OBJECTIVE

 The objective of this study was to compare types of veneer preparations and their combination with three materials.

MATERIALS AND METHODS

 Two finite element models were specially prepared used representing window and wrap around preparation for veneers. The "central incisor" tooth geometry was acquired using a laser scanner, and then its surface was adjusted to form a solid model prior to the removal of each preparation separately. Three materials (Lava Ultimate, IPS e-max, and Celtra) were tested in combination with the preparation type. Bone geometry was simplified as two coaxial cylinders in all models. Each model was subjected to two loading conditions of occlusion (edge-to-edge bite and normal bite).

STATISTICAL ANALYSIS AND RESULTS

 It was observed that cortical, cancellous bone, and periodontal ligament are insensitive to preparation or materials. Their stresses and deformation were within physiological limits. Significant changes appeared on the central incisor tooth structure, cement layer, and veneer layer stresses and deformations under loading cases.

CONCLUSIONS

 Edge-to-edge bite stresses are severe with window-type preparation, and normal bite did not show any critical values on tooth structure, cement layer, or veneer layer. Veneer layer finish line and its contact with the cement layer and tooth structure play a role in the loading transfer mechanism. Preparation type alters the values of stresses on tooth structure, cement, and veneer layers. With window preparation, extreme stresses appear at finish line, while stresses appear under the loading site with wrap around preparation. Veneer and cement layers withstand the load energy with wrap around preparation and reduce tooth structure stresses. Thus, the lifetime of veneer and cement layers might be longer with window preparation.

Three-dimensional Quantification of Enamel Preservation in Tooth Preparation for Porcelain Laminate Veneers: A Fully Digital Workflow In Vitro Study

OBJECTIVE

This in vitro study aimed to evaluate the preservation of enamel after tooth preparation for porcelain laminate veneers (PLVs) at different preparation depths based on a fully digital workflow.

METHODS AND MATERIALS

Sixty extracted human maxillary anterior teeth, including 20 maxillary central incisors (MCIs), 20 maxillary lateral incisors (MLIs), and 20 maxillary canines (MCs) underwent microcomputed tomography (CT) scanning, and were reconstructed as three-dimensional (3D) enamel and dentin models. Subsequently, the three-dimensional (3D) enamel models were imported into Materialise, where each enamel model underwent seven types of virtual preparation for PLVs at preparation depths at 0.1-mm increments from 0.1-0.3-0.5 mm (D1) to 0.7-0.9-1.1 mm (D7). The enamel surface was depicted by merging the virtual preparation and, respective, dentin models. The enamel area and prepared surface were measured to calculate the percentage of enamel (R%). The data were statistically analyzed using one-way analysis of variance (ANOVA) (α=0.05).

RESULTS

The group-wise mean (standard deviation) R values for the MCIs were as follows: D1-D3: 100.00 (0) each, and D4-D7: 74.70 (2.45), 51.40 (5.12), 24.40 (3.06), and 0.00 (0), respectively. The group-wise mean R values for the MLIs were 100.00 (0), 73.70 (3.40), 53.50 (3.44), 25.20 (3.79), and 0.90 (0.99) for the D1-D5 groups, respectively; and 0.00 (0) each for the D6-D7 groups. The group-wise mean (standard deviations) R values for the MCs were as follows: D1-D3: 100.00 (0) each, and D4-D7: 99.00 (1.34), 77.10 (3.28), 74.20 (3.61), and 52.20 (4.09), respectively. The one-way ANOVA revealed significant differences between the seven groups in the MCIs, MLIs, and MCs (p<0.05).

CONCLUSIONS

Our results recommended preparation depths of up to 0.3-0.5-0.7 mm (MCIs), 0.1-0.3-0.5 mm (MLIs), and 0.4-0.6-0.8 mm (MCs) to facilitate complete intraenamel preparation. Moreover, 50% enamel was preserved at preparation depths of 0.5-0.7-0.9 mm (MCIs), 0.3-0.5-0.7 mm (MLIs), and 0.7-0.9-1.1 mm (MCs).

Accuracy of Reduction Depths of Tooth Preparation for Porcelain Laminate Veneers Assisted by Different Tooth Preparation Guides: An In Vitro Study

PURPOSE

To evaluate the accuracy (trueness and precision) of reduction depths of guided veneer preparation assisted by four tooth preparation guides.

MATERIALS AND METHODS

Fifty resin artificial teeth were randomly divided into five groups (n = 10): a freehand group (F), silicone guide group (S), thermoplastic guide group (T), 3D printed uniform guide group (D), and 3D printed auto-stop guide group (A). A preparation for a window veneer on the maxillary right central incisor was performed by two surgeons who used tooth preparation guides for assistance. The maxillary right central incisors were scanned before and after the preparation. The reduction depths were measured in the cervical, middle, and incisal thirds of the prepared surface, and depth maps were created using Geomagic Control X software. The accuracy of the reduction depths at each third was evaluated using both trueness and precision values. The trueness of the reduction depths was determined by calculating the mean absolute differences (MADs) compared to the planning depth, and precision was determined by the standard deviation (SD). The collected data were statistically analyzed using one-way ANOVA and the least significant difference test (α = 0.05).

RESULTS

The MAD ± SD values of the reduction depths in the cervical-third region in groups F, S, T, D, and A were 0.19 ± 0.04, 0.12 ± 0.03, 0.09 ± 0.02, 0.07 ± 0.02, and 0.05 ± 0.01 mm, respectively. In the middle-third region, the MAD ± SD values of groups F-A were 0.19 ± 0.05, 0.13 ± 0.02, 0.09 ± 0.01, 0.06 ± 0.01, and 0.05 ± 0.01 mm. In the incisal-third region, the MAD ± SD values were 0.27 ± 0.05, 0.16 ± 0.04, 0.11 ± 0.03, 0.07 ± 0.01, and 0.05 ± 0.01 mm, respectively. Significant differences in trueness and precision values were found across different groups (F = 45.378, p = 0.000), where group F showed higher MADs than the other 4 groups (p = 0.000), and the highest MADs were detected in group S among the 4 groups in all regions (p = 0.000). Group T showed significantly higher MADs than groups D (P = 0.008) and A (p = 0.001), except in the cervical-third region, where no significant difference was observed between groups T and D (p = 0.077). There was no significant difference between groups D and A (p = 0.148). The deviation map showed significant differences among groups (F = 15.963, p = 0.000), group T presented less deviation than group F (p = 0.000) and group S (p = 0.027) and showed more deviation than group A (p = 0.007).

CONCLUSION

Tooth preparation guides provided more accuracy for veneer preparation than freehand preparation. Among the 4 guides, the 3D printed auto-stop guide presented the lowest absolute difference (0.05 mm) and the silicone guide showed the highest absolute difference of preparation (0.12-0.16 mm).

Colour stability of sectional laminate veneers: A laboratory study

BACKGROUND

This study aimed to evaluate the colour stability of sectional laminate veneers (SLVs) fabricated with four and cemented with two different materials.

METHODS

Eighty SLVs were prepared with a thickness of 0.2-0.4 mm from IPS e.max CAD, Lava Ultimate, CEREC Blocs and IPS InLine and were cemented with Variolink Veneer and Variolink N to form eight groups (n:10). After cementation, specimens underwent 5000 thermocyles prior to immersion in a coffee solution.

RESULTS

Colour change before and after thermal cycling did not reveal significant differences (P > 0.05). After coffee immersion, significant colour change was observed in all groups (P > 0.05). Only IPS InLine cemented with Variolink Veneer was considered clinically acceptable (∆E < 3.3). According to observer scorings, marginal discolouration was higher in Lava Ultimate, while no discolouration was observed in IPS InLine. Dual or light-curing resin cements showed insignificant differences.

CONCLUSIONS

SLVs fabricated with different aesthetic materials underwent perceptible (∆E > 3.3) discolouration except for the IPS InLine cemented with light-curing resin cement. Cementation with either dual-curing or light-curing resin cements does not by itself affect colour stability. The highest marginal discolouration was in the Lava Ultimate group while no discolouration was detected in the IPS InLine group.

Survival Rates for Porcelain Laminate Veneers: A Systematic Review

The aim of this systematic review was to analyze and compare the most up-to-date information available on long-term, medium-term, and short-term survival rates of porcelain laminate veneers (PLVs) and investigate the homogeneity in current studies or lack of it. An electronic search was performed using PubMed, Ovid MEDLINE, Cochrane Library, Web of Science, EBSCO, Science Direct, Wiley, and Scopus databases. Based on the PRISMA guidelines, the main inclusion criteria consisted of research articles published after the year 2000, in vivo studies with a follow-up period of at least 1 year and reporting of the Kaplan–Meier estimated cumulative survival rates. Quality assessment of the included studies was performed using the modified systematic assessment list consisting of 24 items. Thirty full-text articles were reviewed in detail. A total of 30 articles met the inclusion criteria and were selected for qualitative synthesis. The remaining 27 publications were retained to discuss the heterogeneity in the current literature and reported longevity of veneer restorations. A conclusive estimation of the longevity of PLVS beyond 20 years is lacking. The availability of evidence in the current literature is limited in terms of sample size and duration of follow-up. However, the majority of studies have concluded that PLVs have high-success rates and predictable patient outcomes. The present literature indicates an increased heterogeneity among research study designs. Researchers should aim for homogeneous study designs that can be included in systematic reviews and meta-analyses.

Clinical and Esthetical Evaluation of 79 Lithium Disilicate Multilayered Anterior Veneers with a Medium Follow-Up of 3 Years

Objectives  Primary aim of this study was to evaluate survival rate of lithium disilicate veneers in upper and lower anterior teeth. Secondary aims were to evaluate changing in proportions of teeth before and after restorations and to assess mean thickness of the veneers.

Materials and Methods  Seventy-nine upper and lower lithium disilicate veneers were made in 13 patients with worn teeth. Mean follow-up was 3 years. To perform anterior definitive rehabilitations, malocclusions and loss of vertical dimension were treated by full mouth rehabilitations to obtain proper occlusal conditions. Veneers were made of lithium disilicate core and fluorapatite-based ceramic stratification. Survival rate was calculated by Kaplan–Meier analysis. Changing in teeth proportion before and after restorations was analyzed by a paired t -test. Descriptive statistics of thickness values were also performed.

Results  One case of detachment was observed with a 98.7% survival rate. Teeth’s proportions were preserved although the first upper right incisor and canine changed in dimension.

Conclusions  Lithium disilicate veneers in esthetical rehabilitations of worn teeth proved to be an effective way of treatment in a medium follow-up of 3 years. Proportions seemed to be maintained with a minimum dental removal.