Shaping ability of modern Nickel-Titanium rotary systems on the preparation of printed mandibular molars

Influence of access cavity design on root canal instrumentation efficacy in molars - An in vitro study

Background

Several designs of access cavity have been evolved in the recent past with the concept of minimal tooth tissue removal which would improve the root canal treated teeth fracture resistance.

Aim

To investigate the effect of conservative design access cavity during the instrumentation of maxillary molar root canals.

Materials and Methods

Eighty noncarious maxillary molars were assigned to the traditional and conservative access groups (n = 40 each). After designated access preparations, the teeth were immersed in Lugols's solution for staining the pulp tissue. Root canal instrumentation was performed with TruNatomy file system. Pre- and postinstrumentation nano-computed tomography (CT) images were taken and reconstructed using CT-An software. Root canals volumetric analysis was done with CT-Vol software. The analysis of the data was dealt with Shapiro-Wilk test and independent t-test.

Results

The volume of pulp canal space before and after instrumentation changed significantly between the traditional and conservative access design groups, according to an independent t-test. In comparison, the mean volume of dentin removed was much larger in the TAC group (P = 0.0016). The independent t-test manifests difference significantly between traditional endodontic access cavity (TAC) and conservative access cavity (CAC) with percentage of unprepared canal walls. The mean percentage of unprepared area was significantly lesser in TAC group as compared to CAC group (P = 0.0022).

Conclusion

The volume of dentin removed was greater in TAC than with the CAC design. The amount of untouched canal wall area was significantly higher in conservative access design than with the traditional access design group.

Analysis of cyclic fatigue resistance of different endodontic nickel-titanium rotary instruments: An in vitro study

Aims

The aim of this in vitro study was to compare the cyclic fatigue resistance of three different endodontic nickel-titanium rotary instruments using a dynamic testing device.

Materials and Methods

Ten files each of ProTaper Gold (PG), Hyflex Electro-discharge Machining (HEDM), and TruNatomy (TN) were tested in a custom-fabricated dynamic cyclic fatigue testing device at 60° curvature having a radius of curvature of 5 mm. The number of cycles to the fracture (NCF) of each instrument was calculated and three continuous groups were compared by the Kruskal-Wallis test and Dunn post hoc test was used for pairwise comparison.

Results

Cyclic fatigue resistance of HEDM was the highest, followed by TN. PG had the lowest among the three.

Conclusion

Within the limitations of the present in vitro results, it can be concluded that HEDM files appeared to be suitable for shaping complex canals with the greater number of cycles before it fractures.

Comparative evaluation of stress distribution against the root canal wall at three different levels using novel NiTi rotary files - A finite element analysis

Background

Recent innovations in the physical and mechanical features of endodontic file systems have diminished the prospect of stress generation and fracture risk in novel endodontic files.

Aim

The purpose of this research was to comparatively evaluate the stress distribution of recently introduced endodontic rotary files with distinct features and metallurgy at three different levels of the root canal wall by finite element analysis.

Materials and Methods

Forty endodontic files were used in this experiment after being inspected through a scanning electron microscope for any surface deformities. Based on their metallurgy and design, the scanned files were divided into four groups, each with 10 samples: Group A-2Shape files, Group B-F360, Group C-One Curve, and Group D-TruNatomy. To assess the mechanical behavior of these files, the stress produced by computer-aided models of these instruments on the dentinal wall of a simulated root canal was numerically analyzed using ANSYS® 15 Workbench finite element software.

Results

A one-way ANOVA was used to assess all the raw data with post hoc Tukey analysis, the Shapiro-Wilk test, and Levene's test. F360 files exerted the maximum stress on the dentinal wall, while TruNatomy files exerted the least stress at all the distinct levels of dentinal walls.

Conclusions

There was no statistically significant variation in the stress generated between the four groups. Therefore, it can be concluded that improvements in rotary file design and metallurgy have the potential to reduce the stress during canal shaping and the risk of instrument breakage during clinical use.

A cone-beam computed tomographic analysis of total dentin removed, canal transportation, and canal-centering ability following instrumentation with three different file systems: An in vitro study

Aims

The aim of this study was to evaluate the shaping ability following instrumentation with XP-endo Shaper (XPS), TruNatomy (TRN), and HyFlex CM (HCM) file system.

Subjects and Methods

Fifty-four mesiobuccal canals of mandibular molars were selected and allocated into three groups randomly: XPS, TRN system, and HCM file system. Pre- and postinstrumentation scans were taken using a cone-beam computed tomography scanner to determine the amount of root dentin removed, mesiodistal and buccolingual transportation, and canal-centering ratio at 2, 5, and 8 mm from the root end.

Statistical Analysis Used

Data were statistically analyzed using Kruskal-Wallis test and the significance level was set at P = 0.05.

Results

TRN file system removed the least amount of root dentin. XPS showed statistically higher M-D canal transportation at 5 mm level from the apex.

Conclusions

TRN file system showed better dentin preservation as compared to XPS and HCM. XPS showed the highest canal transportation at 5 mm. All three file systems performed similarly in terms of canal-centering ability.