Effect of ultrasonic root-end cavity preparation on dentinal microcrack formation: A micro-computed tomography study

Topography of root-end surface after freehand and three-dimensional-guided apicoectomy procedure: A scanning electron microscope study

Background

Dentinal microcracks formed during apical resection may lead to increased susceptibility to root fracture and improper sealing of apical preparation that may negatively influence the outcome of endodontic microsurgery.

Aims

This study was performed to analyze the root-end surface for dentinal microcracks using a scanning electron microscope (SEM) after resection with high-speed bur and trephine drill.

Materials and Methods

Thirty extracted single-rooted maxillary premolar teeth were selected and randomly distributed into two groups (n = 15). Working length was established using a #15 K-type file. Canals were prepared with a rotary Ni-Ti system to size 30/0.06 using endomotor, irrigated with 3% sodium hypochlorite, dried with paper points, and obturated with gutta-percha cones using a single-cone technique. All samples were mounted on preformed molds and poured using a mixture of sawdust and gypsum. In Group A; tungsten carbide bur was used to perform a freehand apicoectomy. In Group B; a trephine drill was used with a three-dimensional guide to perform 3 mm of root resection. Apicoectomy was performed in both groups under a dental operating microscope. Resected root ends were inspected for microcracks using SEM. The Shapiro-Wilk and Mann-Whitney U-test were used for statistical analysis.

Results

Microcracks were observed in all samples in both study groups. Trephine drill produced more microcracks on the resected root surface compared to the use of high-speed tungsten carbide bur with a statistically significant difference (P < 0.05).

Conclusions

The trephine drill used during targeted endodontic microsurgery produced more microcracks on the resected root dentine surface compared to the high-speed tungsten carbide bur used during freehand apicoectomy.

A novel simplified approach for endodontic retrograde surgery in short single-rooted teeth

BACKGROUND

High technical thresholds, long operative times, and the need for expensive and specialized equipment impede the widespread adoption of endodontic microsurgery in many developing countries. This study aimed to compare the effects of a simplified, cost-effective, and time-efficient surgical approach involving orthograde obturation using biological ceramic material greater than 6 mm combined with apicoectomy for single-rooted teeth with short lengths with those of the conventional and current standard methods.

MATERIALS AND METHODS

Forty-five premolars equally categorized into three groups: conventional surgery group, standard surgery group, and modified surgery group. A µCT scan was used to calculate the volume of voids. A micro-leakage test and scanning electron microscope (SEM) were performed to assess the sealing effect. Additionally, four cases of chronic periapical periodontitis in the anterior region were selected, and the patients received either the modified approach or the standard surgery for endodontic microsurgery.

RESULTS

The volumes of voids in the apical 0-3 mm of the modified group and the standard group were comparable. The micro-leakage test and SEM examination demonstrated closely bonded fillings in the dentinal walls in both the modified surgery group and standard surgery group. The outcomes of the preliminary application of this modified procedure on patients were successful at the time of the follow-up cutoff.

CONCLUSIONS

The modified surgery group exhibited similar root canal filling and apical sealing abilities with the standard procedure for single-rooted teeth with short lengths (< 20 mm). The preliminary application of this modified surgical procedure achieved favorable results.

Evaluation of Dentinal Microcracks following Diode Laser- and Ultrasonic-Activated Removal of Bioceramic Material during Root Canal Retreatment

This study is aimed at evaluating the use of microcomputed tomography (micro-CT) analysis and the dentinal microcrack formation following retreatment of bioceramic sealer employing adjunct laser-activated irrigation and ultrasonic-activated irrigation. Thirty sound human single-canal teeth (n = 30) obturated using the single-cone technique with bioceramic sealer were retreated using nickel-titanium (NiTi) rotary files. The sample was randomly divided into three equal groups: group 1, the control group, was not subjected to further treatment; group 2 underwent ultrasonic activation of irrigants; group 3 underwent active irrigation with a diode laser (980 nm wavelength). Using micro-CT, the teeth were scanned before and after retreatment protocols. Two calibrated experienced observers viewed the cross-sectional images and calculated the number of dentinal defects. The presence of any crack or craze line on the external root surface or internal canal wall was counted. Data were analyzed using Friedman's two-way analysis of variance and Fisher's exact test. Statistical significance was set at p < 0.05. A significant increase occurred in the number of cracks post retreatment protocols, specifically in the coronal and middle canal thirds, compared to pre- and postinstrumentation (p = 0.0001). However, ultrasonic- or laser-activated irrigation did not result in a significant increase in the number of cracks (p = 0.345). NiTi rotary root canal retreatment was associated with a significant increase in dentinal microcracks. However, employing ultrasonic- or laser-activated irrigation as adjunct retreatment techniques did not reveal a significant increase in dentinal microcracks within the roots.

Dentinal microcracks induced by endodontic procedures: A scientometric and bibliometric analysis

Background:

Due to the large number of publications relating the occurrence of dental microcracks to endodontic procedures, this bibliometric study evaluated the scientific pattern and trends in literature and provided an overview of scientific production in this context.

Aim:

To analyze, quantify, and characterize the scientific production and trends of published articles evaluating dentinal microcracks formation after endodontic treatment procedures between 2010 and 2020 using bibliometric indicators.

Materials and Methods:

Published articles were found by the search in the Medline (PubMed) and Scopus database using the combination of the following keywords: Dentinal crack OR Dentinal Microcrack OR Crack formation OR Dentin Defect AND Endodontic treatment OR Root canal preparation OR Canal Preparation OR Root canal treatment OR endodontic procedures. The search was also conducted in the Journal of Endodontics and International Endodontic Journal. After inclusion and exclusion criteria application, data from all studies included were collected.

Results:

Among the 556 results after the search, 45 studies were included and analyzed in this bibliometry. No trend was observed in terms of the increasing number of articles over time. Most of them used an in vitro design, compared the effect of different endodontic techniques/systems for root canal instrumentation on dentinal microcracks formation, and were conducted in Turkey, Brazil, and India. Journal of Endodontics and International Endodontic Journal were the main journals with a higher number of articles published. Interestingly, studies conducted with some funding did not lead to higher citation numbers. Moreover, a relevant proportion of studies did not consider the inclusion of control groups, baseline evaluation, or statistical analysis. Micro-CT was the main technique used to evaluate microcrack presence.

Conclusion:

Microcrack formation after the use of different endodontic techniques/systems has been constantly evaluated in the literature. There is a pattern of methodologies used, which may explain the concentration of these studies in specific journals and countries.

Effect of Heat Softening versus Ultrasonic Removal of Root-End Gutta-Percha on the Quality of Root-End Preparation for Endodontic Microsurgery

This study is aimed at comparing the efficacy of heat softening and ultrasonic removal of root-end gutta-percha during retrograde preparation for root apical microsurgery. Recently extracted single-rooted premolars (n = 40) were prepared with standardized endodontically treated and root-end resection and then randomly divided into four groups that received root-end cavity preparation using four different instruments: a diamond-coated ultrasonic tip (AS3D; SACTEON, Paris, France), AS3D with the modified plugger of cordless heat carrier (MSE; B&L Biotech, Bala Cynwyd, PA, USA), stainless steel ultrasonic tip (Jetip-2; B&L Biotech, Bala Cynwyd, PA, USA), or Jetip-2 with MSE. The time required for root-end preparation was recorded. The root apex samples were examined by scanning electron microscopy to assess root surface microcracks and marginal integrity. The remnants of gutta-percha on the cavity walls were evaluated using a stereomicroscope. Statistical analysis was performed using Student's t-test and Wilcoxon rank-sum test (P < 0.05). Usage of MSE with Jetip-2 significantly reduced preparation time from 99.8 ± 6.8 s to 32.4 ± 1.0 s (P = 0.009), the number of microcracks from 42 to 13 (P = 0.036), and the remnants of gutta-percha from 80% to 20% (P = 0.041). Similar results were observed for AS3D with MSE. The heat softening of MSE was effective in cleaning gutta-percha, thus greatly improving the efficiency of the root-end preparation, thereby producing a root-end cavity with fewer microcracks and better marginal integrity.

Ten Years of Micro-CT in Dentistry and Maxillofacial Surgery: A Literature Overview

Micro-computed tomography (micro-CT) is a consolidated imaging technology allowing non-destructive three-dimensional (3D) qualitative and quantitative analysis by the observation of microstructures with high resolution. This paper aims at delivering a structured overview of literature about studies performed using micro-CT in dentistry and maxillofacial surgery (MFS) by analyzing the entire set of articles to portray the state of the art of the last ten years of scientific publications on the topic. It draws the scenario focusing on biomaterials, in vitro and in/ex vivo applications, bone structure analysis, and tissue engineering. It confirms the relevance of the micro-CT analysis for traditional research applications and mainly in dentistry with respect to MFS. Possible developments are discussed in relation to the use of the micro-CT combined with other, traditional, and not, techniques and technologies, as the elaboration of 3D models based on micro-CT images and emerging numerical methods. Micro-CT results contribute effectively with whose ones obtained from other techniques in an integrated multimethod approach and for multidisciplinary studies, opening new possibilities and potential opportunities for the next decades of developments.