Comparison of osteogenic potential of poly-ether-ether-ketone with titanium-coated poly-ether-ether-ketone and titanium-blended poly-ether-ether-ketone: An in vitro study

Research and Application of Medical Polyetheretherketone as Bone Repair Material

Polyetheretherketone (PEEK) can potentially be used for bone repair because its elastic modulus is similar to that of human natural bone and good biocompatibility and chemical stability. However, its hydrophobicity and biological inertness limit its application in the biomedical field. Inspired by the composition, structure, and function of bone tissue, many strategies are proposed to change the structure and functionality of the PEEK surface. In this review, the applications of PEEK in bone repair and the optimization strategy for PEEK's biological activity are reviewed, which provides a direction for the development of multifunctional bone repair materials in the future.

A novel bioactive glass/graphene oxide composite coating for a polyether ether ketone-based dental implant

Polyether ether ketone (PEEK) is a biocompatible material that lacks antimicrobial activity and bioactivity; therefore, is not appropriate for use as a dental implant. To overcome these deficiencies, a novel composite coating of bioactive glass and graphene oxide was prepared. PEEK discs were polished, cleaned, and the surface treated with sulfuric acid for 15 min. The composite coating consisted of bioactive glass produced by the sol-gel route and doped with 0.75 wt% graphene oxide. X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy-energy dispersive spectroscopy analyses were employed to characterize the composite coating, and the coating adhesion strength quantified using a pull-off test. Cytotoxicity was assessed using osteoblast-like cells and gingival fibroblasts. The wettability of the coated and non-coated samples was determined by optical contact angle assessment, and bioactivity was assessed by immersion in simulated body fluid. The results revealed that the bioactive glass/graphene oxide composite coating, approximately 7 μm thick, was transparent, homogenous with few microcracks and microporosities, but adhered strongly and was not cytotoxic to either osteoblast-like cells or gingival fibroblasts. The wettability of the PEEK sample was increased to <20° after coating with the composite, and apatite formation was detectable after 14 days of immersion in simulated body fluid.

Clinical evaluation of performance of single unit polyetheretherketone crown restoration-a pilot study

Aim

The aim of this study was to evaluate the clinical performance and patient satisfaction of PEEK Crowns.

Setting and Design

In-vivo longitudinal pilot study.

Materials and Method

20 PEEK crowns were placed in 20 patients. 11 were placed in the maxilla and 9 were placed in the mandible. All procedural steps were performed by the same operator. The teeth were prepared with a chamfer finish line of 0.8 to 1 mm. The crowns fabricated were luted using resin cement. Using Modified Ryge's Criteria, the crowns were examined for anatomic form, marginal integrity, surface roughness, restoration staining, marginal discoloration and color match at a time interval of 1 week, 1 month, 3 months, 6 months, one year. Patient satisfaction was also evaluated at the same interval using a questionnaire.

Statistical Analysis Used

The data collected was evaluated using fisher's exact test.

Results

Based on modified Ryge's criteria, almost 90% of the crowns were rated satisfactory. Fracture was registered in only one crown. Slight chipping off was seen in two crowns. No significant difference was seen in any other factors assessed. Slight variation was seen in the periodontal status of 3 patients.

Conclusion

Within the limitations of this study the following conclusions were drawn that the PEEK crowns demonstrated by the use of Modified Ryge's Criteria, its capability to produce quality prostheses that were rated satisfactory with a relatively low rate of fracture over the relative mean period of one year.

In Vitro Effect of Modified Polyetheretherketone (PEEK) Implant Abutments on Human Gingival Epithelial Keratinocytes Migration and Proliferation

Improving soft tissue attachment to implant abutments is a crucial factor for enduring health and maintenance of soft peri-implant tissue health. In this in vitro study we aimed to compare the biocompatibility of three different abutment surfaces: titanium, zirconia and modified polyetheretherketone (PEEK). Surface topography, roughness and wettability were investigated with scanning electron microscopy, profilometer and contact angle meter, respectively. Human gingival epithelial keratinocytes were examined for viability, morphology, proliferation and migration by using tetrazolium salt colorimetric assay, scanning electron microscopy imaging, immunofluorescence bromodeoxyuridine analysis and scratch wound healing assays. Roughness measurements revealed differences between the investigated surfaces. Keratinocytes cultured on all examined surfaces indicated adhesion and attachment by means of scanning electron microscopy imaging. Cell viability assays showed no significant differences between the groups (p > 0.05). The modified PEEK surface similarly improved surface roughness in comparison to titanium and zirconia, which resulted in greater and equivalent cell proliferation and migration. The study methodology showed here may emphasize the importance of cell interactions with different abutment materials, which in part increases the changes of implant success. PEEK, titanium and zirconia surface types used in this study showed mostly similar epithelial biological responses.

PEEK materials as an alternative to titanium in dental implants: A systematic review

PURPOSE

Evaluation of the available research on PEEK materials to find that whether PEEK material has favorable properties and can enhance osseointegration, so that they can be utilize as implants material.

MATERIALS AND METHODS

An electronic and structured systematic search was undertaken in May 2018, without any restrictions of time in the Medline/Pubmed, Sci-hub, Ebscohost, Cochrane, and Web of Science databases. To identify other related references further hand search was done. Articles related to PEEK and their applications in implants were only included. Articles not available in abstract form and article other than English language were excluded.

RESULTS

Initially, the search resulted in 153 papers. Independent screenings of the abstracts were done by the reviewers to identify the articles related to the question in focus. Sixty-two studies were selected out of which 10 were further excluded due to not in English language. Two additional papers were obtained after hand searching, and finally 54 articles were included in the review.

CONCLUSIONS

Surface modification of PEEK seems to enhance the cell adhesion, proliferation, biocompability, and osteogenic properties of PEEK implant materials. PEEK had also influence the biofilm structure and reduces the chances of periimplant inflammations. Further research and more number of controlled clinical trials on PEEK implant is required in near future so that it can replace titanium in future.