Choice of a Suitable Dosimeter for Photon Percentage Depth Dose Measurements in Flattening Filter-Free Beams

Dose accuracy improvement on head and neck VMAT treatments by using the Acuros algorithm and accurate FFF beam calibration

Background

The purpose of this study was to assess dose accuracy improvement and dosimetric impact of switching from the anisotropic analytical algorithm (AA) to the Acuros XB algorithm (AXB) when performing an accurate beam calibration in head and neck (H&N) FFF-VMAT treatments.

Materials and methods

Twenty H&N cancer patients treated with FFF-VMAT techniques were included. Calculations were performed with the AA and AXB algorithm (dose-to-water - AXB_w- and dose-to-medium - AXB_m-). An accurate beam calibration was used for AXB calculations. Dose prescription to the tumour (PTV70) and at-risk-nodal region (PTV58.1) were 70 Gy and 58.1 Gy, respectively. A PTV70_{_bone} including bony structures in PTV70 was contoured. Dose-volume parameters were compared between the algorithms. Statistical tests were used to analyze the differences in mean values and the correlation between compliance with the D95 > 95% requirement and occurrence of local recurrence.

Results

AA systematically overestimated the dose compared to AXB algorithm with mean dose differences within 1.3 Gy/2%, except for the PTV70_{_bone} (2.2 Gy/3.2%). Dose differences were significantly higher for AXB_m calculations when including accurate beam calibration (maximum dose differences up to 2.8 Gy/4.1% and 4.2 Gy/6.3% for PTV70 and PTV70_{_bone}, respectively). 80% of AA-calculated plans did not meet the D95 > 95% requirement after recalculation with AXB_m and accurate beam calibration. The reduction in D95 coverage in the tumour was not clinically relevant.

Conclusions

Using the AXB_m algorithm and carefully reviewing the beam calibration procedure in H&N FFF-VMAT treatments ensures (1) dose accuracy increase by approximately 3%; (2) a consequent dose increase in targets; and (3) a dose reporting mode that is consistent with the trend of current algorithms.

Dosimetric characterization of a rigid, surface-contour-specific thermoplastic bolus material

A dosimetric analysis of a commercially available thermoplastic sheet bolus, Klarity EZ Bolus^TM, was completed. Attenuation characteristics were evaluated using different configurations of a rectilinear water-mimicking plastic phantom irradiated by a high-energy linear accelerator using three photon energies, five electron energies. These results were compared with data obtained during the linear accelerator commissioning process to determine depths of water that attenuated beams similarly. CT scans of the flat, unmolded sheet bolus, as well as of the bolus molded to a cylindrical phantom, were analyzed. The product was found to form a durable and rigid, contour-specific bolus with a water-equivalent thickness of approximately 6 mm for a single sheet, and 11 mm for two sheets in tandem.