On the Bioactivity and Mechanical Properties of Gehlenite Nanobioceramic: A Comparative Study

In vitro Studies of Polycaprolactone Nanofibrous Scaffolds Containing Novel Gehlenite Nanoparticles

Background:

Recently, many studies have been done on the physicochemical properties and biocompatibility of polycaprolactone (PCL) scaffolds containing ceramic reinforcers in the field of bone tissue engineering. In this study, the physical, mechanical and biological properties of electrospined-fabricated PCL scaffolds containing gehlenite (GLN) nanoparticles (NPs) as a novel bioceramic were investigated.

Methods:

To obtain the appropriate mechanical properties, the solution contains 3%, 5%, 7%, and 10% wt. of GLN NPs were prepared. Fiber morphology was investigated by scanning electron microscopy. In order to evaluate the NPs distribution, Energy Dispersive X-Ray Spectroscopy, X-ray diffraction, and Fourier Transform Infrared Spectroscopy spectroscopy were used. The scaffold hydrophilicity was measured by the water contact angle test. The tensile test was used to check the mechanical strength of the scaffold. The proliferation of MG-63 cells was evaluated by the MTT test. Alkaline phosphatase (ALP) activity of MG-63 cells was also examined.

Results:

Average fibers' diameters and porosity of PCL/GLN7% were obtained 150–500 nm and 80%, respectively. An increase in the scaffold hydrophilicity was observed by the addition of GLN NPs. The strength of PCL/GLN7% was higher than the blank PCL scaffold. Cell proliferation of scaffolds containing GLN was higher than the blank PCL scaffold. A significant increase in the secretion of ALP for GLN-loaded scaffolds was seen.

Discussion:

The results showed that PCL/GLN7% composite scaffold could be a good candidate for bone tissue engineering.

Conclusion:

The overall results indicate that the scaffold (PCL /GLN7%) has suitable mechanical properties, a great cell compatibility for bone tissue regeneration.

Numerical Analysis of the Influence of Porosity and Pore Geometry on Functionality of Scaffolds Designated for Orthopedic Regenerative Medicine

BACKGROUND

Scaffolds are vital for orthopedic regenerative medicine. Therefore, comprehensive studies evaluating their functionality with consideration of variable parameters are needed. The research aim was to evaluate pore geometry and scaffold porosity influence on first, cell culture efficiency in a perfusion bioreactor and second, osteogenic cell diffusion after its implantation.

METHODS

For the studies, five pore geometries were selected (triangular prism with a rounded and a flat profile, cube, octagonal prism, sphere) and seven porosities (up to 80%), on the basis of which 70 models were created for finite element analyses. First, scaffolds were placed inside a flow channel to estimate growth medium velocity and wall shear stress. Secondly, scaffolds were placed in a bone to evaluate osteogenic cell diffusion.

RESULTS

In terms of fluid minimal velocity (0.005 m/s) and maximal wall shear stress (100 mPa), only cubic and octagonal pores with 30% porosity and spherical pores with 20% porosity fulfilled the requirements. Spherical pores had the highest osteogenic cell diffusion efficiency for porosities up to 30%. For higher porosities, the octagonal prism's pores gave the best results up to 80%, where no differences were noted.

CONCLUSIONS

The data obtained allows for the appropriate selection of pore geometry and scaffold porosity for orthopedic regenerative medicine.