45S5 Bioglass paste is capable of protecting the enamel surrounding orthodontic brackets against erosive challenge

Surface Modification of Titanium Implants by Metal Ions and Nanoparticles for Biomedical Application

Implant surface modification can improve osseointegration and reduce peri-implant inflammation. Implant surfaces are modified with metals because of their excellent mechanical properties and significant functions. Metal surface modification is divided into metal ions and nanoparticle surface modification. These two methods function by adding a finishing metal to the surface of the implant, and both play a role in promoting osteogenic, angiogenic, and antibacterial properties. Based on this, the nanostructural surface changes confer stronger antibacterial and cellular affinity to the implant surface. The current paper reviews the forms, mechanisms, and applications of nanoparticles and metal ion modifications to provide a foundation for the surface modification of implants.

Comparative analysis of the effect of Bioactive Glass 45S5 on enamel erosion progression in human dentitions (in vitro study)

OBJECTIVES

The aim of the present study was to compare the surface morphology alterations, mineral content, and surface roughness of eroded enamel surface versus eroded enamel surface which was preceded by Bioactive Glass 45S5 (BAG45S5) application in both primary and permanent human dentitions.

MATERIALS AND METHODS

Fifty-two primary teeth and fifty-two permanent teeth were selected. Teeth were randomly divided into 4 groups of twenty-six teeth each. Groups A1 and B1 underwent erosion with 1% citric acid, while groups A2 and B2 were subjected to application of BAG45S5 powder followed by the same erosive conditions as A1 and B1. Measurements were performed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and surface profilometry. They were used to examine the surface morphology alterations, mineral content, and surface roughness, respectively.

RESULTS

SEM of enamel which received BAG45S5 showed smoother surface in primary teeth post erosion. EDX analysis showed that enamel exhibited crucial resistance to mineral loss in the group which received BAG45S5 prior to inducing erosion as compared to the induced erosion-only group. This was significant (p < 0.005) in both human dentitions. Erosion-only groups showed significantly less surface roughness in permanent teeth (p < 0.045). A marked decrease in surface roughness was observed in surfaces receiving BAG45S5, primary teeth (p < 0.001), and permanent teeth (p < 0.001).

CONCLUSIONS

Bioactive Glass 45S5 proved successful against erosive conditions in both primary and permanent teeth with better performance in the permanent teeth so it can be regarded as a means of prevention.

CLINICAL RELEVANCE

Bioactive Glass 45S5 powder could be used not only to remove stains but also as a prophylactic preventive measure against the multiple episodes of acidic food and beverage consumption in children.

Impact of silanization of different bioactive glasses in simplified adhesives on degree of conversion, dentin bonding and collagen remineralization

OBJECTIVE

To analyze simplified adhesive containing pure or silanized bioglass 45S5 (with calcium) or Sr-45S5 (strontium-substituted) fillers applied on dentin and to evaluate the microtensile bond strength (µTBS), interface nanoleakage, degree of conversion of adhesive, collagen degradation and remineralization.

METHODS

Ambar Universal adhesive (FGM) was doped with 10 wt% bioactive glasses to form following groups: Control (no bioglass), 45S5 (conventional bioglass 45S5), Sr-45S5 (Sr-substituted bioglass 45S5), Sil-45S5 (silanized bioglass 45S5) and Sil-Sr-45S5 (silanized bioglass Sr-45S5). Adhesives were applied after dentin acid-etching using phosphoric acid at extracted human molars. Resin-dentin sticks were obtained and tested for µTBS, nanoleakage at 24 h or 6 months. Degree of conversion was measured using micro-Raman spectroscopy. Dentin remineralization was assessed by FTIR after 6-month storage in PBS. Hydroxyproline (HYP) release was surveyed by UV-Vis spectroscopy. Statistical analysis was performed using ANOVA and Tukey's test (p < 0.05).

RESULTS

Regarding µTBS, Sr-45S5 and 45S5 presented higher and stable results (p > 0.05). Control (p = 0.018) and Sil-Sr-45S5 (p < 0.001) showed µTBS reduction after 6-month aging. Sil-Sr-45S5 showed higher HYP release than that obtained in the 45S5 group. Sil-45S5 showed mineral deposition and increase in µTBS (p = 0.028) after 6-months. All experimental adhesives exhibited higher degree of conversion compared to Control group, except for 45S5. All adhesives created gap-free interfaces, with very low silver impregnation, except for Sil-Sr-45S5.

SIGNIFICANCE

The incorporation of silanized 45S5 bioglass into the universal adhesive was advantageous in terms of dentin remineralization, bonding performance and adhesive polymerization. Conversely, Sil-Sr-45S5 compromised the µTBS, interface nanoleakage and had a negative impact on HYP outcomes.

Using Copper-Doped Mesoporous Bioactive Glass Nanospheres to Impart Anti-Bacterial Properties to Dental Composites

Experimental dental resin composites containing copper-doped mesoporous bioactive glass nanospheres (Cu-MBGN) were developed to impart anti-bacterial properties. Increasing amounts of Cu-MBGN (0, 1, 5 and 10 wt%) were added to the BisGMA/TEGDMA resin matrix containing micro- and nano-fillers of inert glass, keeping the resin/filler ratio constant. Surface micromorphology and elemental analysis were performed to evaluate the homogeneous distribution of filler particles. The study investigated the effects of Cu-MBGN on the degree of conversion, polymerization shrinkage, porosity, ion release and anti-bacterial activity on S. mutans and A. naeslundii. Experimental materials containing Cu-MBGN showed a dose-dependent Cu release with an initial burst and a further increase after 28 days. The composite containing 10% Cu-MBGN had the best anti-bacterial effect on S. mutans, as evidenced by the lowest adherence of free-floating bacteria and biofilm formation. In contrast, the 45S5-containing materials had the highest S. mutans adherence. Ca release was highest in the bioactive control containing 15% 45S5, which correlated with the highest number of open porosities on the surface. Polymerization shrinkage was similar for all tested materials, ranging from 3.8 to 4.2%, while the degree of conversion was lower for Cu-MBGN materials. Cu-MBGN composites showed better anti-bacterial properties than composites with 45S5 BG.

Evaluation of Bioactive Glass and Low Viscosity Resin as Orthodontic Enamel Sealer: An In Vitro Study

The study aimed to evaluate the effect of applying fluoride bioactive glass (FBAG) and Alpha-Glaze® (resin sealer) on the shear bond strength of orthodontic brackets to enamel bonded by Transbond XT, brushing−abrasion durability, and their protective effect against simulated cariogenic acidic attack. Materials include 135 extracted premolars that were divided into three groups—FBAG, Alpha-Glaze, and control. The shear bond strength test was measured using an Instron Universal Testing Machine. The brushing abrasion challenge took place with a tooth-brushing simulator. Transmitted light microscopy examinations were performed after the specimens were demineralized for 4 days. The results show that the shear bond strength values of the three groups did not report any statistically significant differences: FBAG (28.1 ± 5.5 Mpa), Alpha-Glaze (32.5 ± 7.4 Mpa), and control (30.7 ± 6.5 Mpa) p < 0.05. The Adhesive Remenant Index (ARI) study showed chipping of enamel in 6.6% of Alpha-Glaze and control specimens and 40% of specimens had their enamel surface covered with resin. Furthermore, 30% of the FBAG and 100% of the Alpha-Glaze sealer specimens resisted the abrasion test. In conclusion, FBAG can serve as an orthodontic-sealer capable of protecting the enamel surface surrounding orthodontic brackets. However, the Alpha-Glaze sealer did not offer the capability of protecting the enamel.

Effect of citric acid erosion on enamel and dentin and possible protection by a novel bioactive borate adhesive system

OBJECTIVES

This study examined the ability of a borate adhesive to protect enamel/dentin surfaces from acidic erosion and its effect on the shear bond strength (SBS) of enamel/dentin to resin composite.

MATERIALS AND METHODS

180 human enamel/dentin specimens were utilized. Enamel buccal surfaces were etched with phosphoric-acid then divided into: (EBG) borate glass adhesive group; (ERS) resin-adhesive system group; (EF) fluoride gel 1.23% group, and enamel control (EC) group; followed by bonding to orthodontic-buttons. The dentin specimens were conditioned by EDTA (Ethylene-diamine-tetra-acetic acid) and divided into: (DBG) borate glass resin, (DRS) resin adhesive; (DDA) group had a dentin-desensitizing agent VivaSens (VivaDent, Liechtenstein) and (DC) control group. The treated enamel/dentin specimens had their SBS to composite. The enamel/dentin specimens were exposed to 1% citric acid (18 min). Enamel/dentin specimens were examined by (SEM/EDS) scanning-electron-microscope equipped with electron-dispersive-spectroscopy and (FTIR/ATR). Analysis-of-Variance (ANOVA) was used to compare the SBS and Wilcoxon-signed-rank test was used to compare the enamel/dentin areas protected by the applied agents before/after erosion (p = 0.05).

RESULTS

There was no significance difference in SBS among all groups except for (DDA) group that showed significant decrease p < 0.05. (EBG) and (DBG) groups were the only groups significantly protected enamel and dentin from erosion p < 0.05. FTIR/ATR showed that erosion altered the chemical structure of (DRS), (DDA), and (DC) groups but did not affect the other enamel/dentin groups. Degree of conversion of the borate-adhesive system was acceptable.

CONCLUSION

The Borate adhesive system released calcium and phosphate compounds that decreased the erosive activity of the citric acid resulting in protecting simulated dentin-hypersensitive areas and enamel from erosion without affecting the SBS to resin-composite.

CLINICAL SIGNIFICANCE

A Borate adhesive system can be adopted as a therapeutic agent in a fully integrated program for protecting dentin-hypersensitive areas and in enamel next to orthodontic fixed appliances.

Strategies of Bioceramics, Bioactive Glasses in Endodontics: Future Perspectives of Restorative Dentistry

Prevalently, there is a primary strategy to cure caries using restorative materials notably bioceramics. Existing synthetic materials stimulate natural tooth structure with acceptable interfacial bonding and esthetic and biomechanical qualities with better durability. Several bioceramics have been introduced and investigated for their potentialities as restorative materials. Biomineralization of tooth initiates repair and regeneration of natural dental tissue and reinstating the integrity of periodontium. In the evolution of bioceramics in the aspects of different essential composition for dental application, recent technology and modern strategies revolutionize the restorative dentistry. Bioglass is one among the important bioceramics as a restorative material, and by regulating the properties of the material, it is possible to construct improved formulation towards restoration. This article reviews the current revolution of endodontics, existing restorative materials, and technologies to be achieve for engineering materials with the better design.

A Bioactive Enamel Sealer Can Protect Enamel during Orthodontic Treatment: An In Vitro Study

Background: This study aimed to evaluate the effectiveness of an experimental bioactive enamel resin sealer in protecting the enamel adjacent to orthodontic brackets against erosion. Methods: Orthodontic brackets (n = 50) were bonded to freshly extracted, sound maxillary premolars using Transbond™ XT Primer (3M Unitek, Monrovia, CA, USA) and Transbond Plus Color Change adhesive (3M Unitek, USA). Five experimental groups (n = 10) had the following treatments applied: a resin bioactive sealer with 45S5 bioglass, 35% by weight; a resin sealer without bioactive glass; fluoride; the orthodontic sealer, Opal Seal (Opal-Orthodontics, South Jordan, UT, USA); and, in the control group, an untreated surface. All the specimens were stored for 18 min in 1% citric acid. All the specimens were examined by SEM and electron dispersive spectroscopy (EDS). The Wilcoxon signed-rank test was used to compare the enamel surfaces covered by the sealers before and after the acid challenge. Attenuated total reflectance Fourier transform infrared spectroscopy detected the degree of the experimental resins’ conversion to verify their suitability for clinical use. Results: The percentage of the bioactive resin sealer and Opal Seal groups’ protection against enamel erosion was 100%, which was significantly more than the other groups, p < 0.05. The degree of conversion for the bioactive and unfilled resins was 42.4% ± 3.6% and 48.57% ± 5%, respectively. Conclusion: The bioactive resin sealer and the Opal Seal both protected the enamel from erosion.

Unravelling the effects of ibuprofen-acetaminophen infused copper-bioglass towards the creation of root canal sealant

Impact towards the tuneable characteristics of bioactive glasses (BAG) has been explored; as there is no root canal sealant till date with ideal characteristics competent enough to manoeuvre the perplexing root canal architecture. Combeite, calcite and traces of cuprorivaite crystalline phases were validated for material formation, in which Cu 2P [XPS] peak authenticating the presence of copper in bioglass network (Cu-BAG). Spherical and platelet-like morphologies were observed and the grain size of Cu-BAG (~100 nm) was lesser as compared to BAG (~ 1 µm). These particle distributions impacted the porosity, and dominant non-bridging oxygens in Cu-BAG influences ionic dissolution, which subsequently enhanced the mineralization. These bioactive materials were loaded with acetaminophen and ibuprofen, corresponding organic moieties was confirmed through FT-IR. These drugs loaded bioactive materials exhibited tremendous anti-inflammatory and anti-microbial behavior with better sealing ability. Drug loaded bioglass paste filled in biomechanically prepared root canal was estimated for sealing potential, mineralization, micro leakage, and fracture resistance properties. Hydroxyl apatite growth was noted on the sealants, flower like protuberance confirmed the sealing potential of the prepared material. Bioglass exhibited promising characteristics required in a root canal sealant. This investigation is a step further towards tailoring the properties of bioactive materials as promising candidates in root canal obturation and thereof.

Characterization of a novel enamel sealer for bioactive remineralization of white spot lesions

OBJECTIVES

45S5 Bioglass is a bioactive glass capable of releasing ions that can interact with dental hard tissues. The current study aimed at examining the effectiveness of 45S5 Bioglass in remineralizing enamel white spot lesion (WSL) as well as its effect on the bond strength of orthodontic brackets bonded to demineralized enamel.

MATERIALS AND METHODS

WSLs were induced in the buccal surfaces of 135 human extracted teeth by storage in acid solution pH 4.5 for four days. The specimens were then equally divided into three groups; Demineralized group, Bioglass group (BG), and control group (intact enamel). The groups were chemically analyzed using (FTIR/ATR) Fourier-transform infrared spectroscopy/attenuated total reflectance, (XRD) X-ray diffraction, and (SEM/EDS) scanning electron microscope equipped with electron-dispersive-spectroscopy. Moreover, 10 specimens from each group were tested using Transverse Micro Radiography (TMR) technique, and 15 specimens from each group were bonded with metal orthodontic brackets and tested for shear bond strength test (SBS). The data were analyzed statistically using One way ANOVA p < 0.05.

RESULTS

TMR study showed that bioglass group samples recorded lesion depth of 70.19 ± 29.21 μm and Δ Z (mineral loss) 732.15 ± 210.16 vol% μm which was significantly lower than the demineralized specimens having lesion depth of 115.75 ± 19.98 μm and Δ Z (mineral loss) 3472.69 ± 738.38 vol%μm, moreover, bioglass specimens recorded 14.15 ± 2.35 Mpa which was significantly higher than demineralized specimens 6.82+1.83 Mpa but less than the control specimens 20.5 + 6.1 MPa (p < 0.05). FTIR/ATR, XRD, and SEM/EDS tests showed that bioglass paste formed a layer of brushite crystals onto the treated enamel surface.

CONCLUSION

45S5 bioglass paste may serve as an effective remineralizing agent for demineralized enamel.

The Efficiency of Fluoride Bioactive Glasses in Protecting Enamel Surrounding Orthodontic Bracket

Objectives

The aim of this study was to evaluate the protective effect of using four different fluoride bioactive enamel sealers against an acidic erosion challenge.

Materials and Methods

A sample of 50 freshly extracted sound upper premolars had their buccal surface bonded to 50 orthodontic brackets using Transbond PLUS color change adhesive; the first four groups had four compositions of fluoride bioactive glasses based on 37 mol% SiO₂, 43.9-53.9 mol% CaO, 6.1 mol% P₂O₅ and CaF₂, and 0-10 mol% of Na₂O applied to their surfaces and the fifth group served as control (which was not treated by any bioactive sealer). All specimens were challenged by 1% citric acid for 18 minutes which was stirred by a magnetic stirrer. The enamel surfaces next to the orthodontic brackets were examined by SEM. The Wilcoxon signed-rank test was used to compare the area covered by the fluoride bioactive pastes before/after erosion (p < 0.05). Samples from the layer formed on top of the examined teeth were tested before/after erosion to be examined by the attenuated total reflectance Fourier-transform infrared spectroscopy (FTIR/ATR).

Results

The FTIR/ATR test showed that fluoride bioactive pastes' applications resulted in the formation of a hydroxyapatite-rich layer; the SEM analysis showed that the aforementioned layer significantly resisted erosion challenge when compared to the control group (p < 0.05).

Conclusions

Fluoride bioactive pastes can efficiently protect the enamel surfaces next to orthodontic brackets from acidic erosion challenges.

Silica-Based Bioactive Glasses and Their Applications in Hard Tissue Regeneration: A Review

Regenerative medicine is a field that aims to influence and improvise the processes of tissue repair and restoration and to assist the body to heal and recover. In the field of hard tissue regeneration, bio-inert materials are being predominantly used, and there is a necessity to use bioactive materials that can help in better tissue-implant interactions and facilitate the healing and regeneration process. One such bioactive material that is being focused upon and studied extensively in the past few decades is bioactive glass (BG). The original bioactive glass (45S5) is composed of silicon dioxide, sodium dioxide, calcium oxide, and phosphorus pentoxide and is mainly referred to by its commercial name Bioglass. BG is mainly used for bone tissue regeneration due to its osteoconductivity and osteostimulation properties. The bioactivity of BG, however, is highly dependent on the compositional ratio of certain glass-forming system content. The manipulation of content ratio and the element compositional flexibility of BG-forming network developed other types of bioactive glasses with controllable chemical durability and chemical affinity with bone and bioactivity. This review article mainly discusses the basic information about silica-based bioactive glasses, including their composition, processing, and properties, as well as their medical applications such as in bone regeneration, as bone grafts, and as dental implant coatings.

Fluoride bioactive glass paste improves bond durability and remineralizes tooth structure prior to adhesive restoration

OBJECTIVE

The current study aimed at examining a fluoride containing bioactive glass (BiominF®) paste as a temporary filling material capable of remineralizing the demineralized enamel or dentin, and its ability to decrease a simulated dentinal fluids pressure on the resin/dentin interface, without affecting the shear bond strength of a universal bonding agent to enamel and dentin.

METHODS

60 premolars were utilized for the acid resistance, trans-microradiography (TMR) and shear bond strength (SBS) experiments. Enamel and dentin discs were demineralized for 4 days to create a subsurface demineralized zone followed by applying BiominF® paste, 1.23% acidulated phosphate fluoride, or a temporary filling material for 24 h. 30 extracted human non-carious third molars were utilized for the pulpal pressure experiment in which direct communication to the pulp chamber was created by cutting at a level approximately 1 mm below the cemento-enamel junction while the coronal enamel was ground to expose mid coronal dentin. The dentin surface was exposed to a simulated pulpal pressure. The dentin surfaces had BiominF® paste, an oxalate desensitizing agent, or temporary filling material followed by application of a universal adhesive system.

RESULTS

One way ANOVA showed that BiominF® paste remineralized effectively the demineralized enamel or dentin, did not affect the bond strength of the enamel and dentin surfaces to the tested adhesive system p < 0.05, and improved the acid resistance of the demineralized enamel and dentin against a secondary erosive challenge. Moreover, BiominF® paste decreased the nanoleakage expression in the dentin/adhesive interface exposed to a simulated pulpal pressure.

SIGNIFICANCE

BiominF® paste may serve as a temporary filling material that may improve the longevity of adhesive restorations and help to conserve tooth structures by preserving the demineralized enamel and dentin form cutting during cavity preparation.

Efficacy of Ca2+- or PO4 3--conjugated mesoporous silica nanoparticles on dentinal tubule occlusion: an in-vitro assessment

Background

Maintaining a long-term biological effect of dental materials on dentinal tubule occlusion is one of the great technical challenges in dental clinics. In addition to physical treatment, chemical treatment to produce insoluble precipitates to seal dentinal tubules has been used. As dentin is mostly composed of calcium and phosphate complexes, in this study, we have developed a novel tubule-occluding material [Ca²⁺/PO₄³⁻@mesoporous silica nanoparticles (MSNs)] by separately conjugating either Ca²⁺ or PO₄³⁻ with MSNs.

Methods

The shape and structure of the MSNs were examined using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The surface morphology and chemical compositions of Ca²⁺@MSNs/PO₄³⁻@MSNs and Ca²⁺/PO₄³⁻@MSNs were examined using SEM and X-ray fluorescence (XRF). The element distribution of Ca²⁺/PO₄³⁻@MSNs was detected using energy dispersive spectrometer (EDS). The sustained release ability of Ca²⁺@MSNs/PO₄³⁻@MSNs was detected using inductively coupled plasma atomic emission spectrometry (ICP-AES). The efficacy of Ca²⁺/PO₄³⁻@MSNs on dentinal tubule sealing was evaluated using SEM, and the results were analyzed by Image-Pro software to determine the best water-powder ratio. We also compared the sealing efficacy between Ca²⁺/PO₄³⁻@MSNs and NovaMin, which is currently used in clinics, under the simulated conditions of oral acidic corrosion and mechanical friction.

Results

Ca²⁺/PO₄³⁻@MSNs are a new type of tubule-occluding material with sustained release properties. The ratio of Ca²⁺@MSNs: PO₄³⁻@MSNs: H₂O =0.015 g: 0.015 g: 150 µL exhibited an excellent sealing effect on dentinal tubules as well as resistance to oral acid corrosion and daily oral friction.

Conclusions

The novel dental material Ca²⁺/PO₄³⁻@MSNs demonstrates potential long-term effectiveness in sealing dentinal tubules and reducing dentin sensitivity, which is one of the most important problems in dental clinics.

Dentin tubule obturation of a bioglass-based dentin desensitizer under repeated exposure to lactid acid and brushing

Background

Dentin hypersensitivity is a frequent finding especially in periodontitis patients. Conventional treatment aims for obstruction of dentin tubules by disabling liquid and osmotic fluctuation to and from the pulpal chamber. A novel bioglass-based desensitizer was shown to obstruct tubules and to resist periodic exposure to lactic acid. Whether this obstruction is resistant to brushing had not been tested so far. Accordingly, the present study aimed to assess dentin tubule obstruction after repeated acid exposure and brushing.

Methods

Sixty dentin discs were cleaned with 17% EDTA, mounted into a pulp fluid simulator and randomly divided into 3 groups: No surface treatment in Group A, Seal&Protect® in group B and DentinoCer in group C. Discs were exposed to 0.1 M non-saturated lactic acid thrice and standardized brushing twice a day for 12 days. At baseline and after 2, 4 and 12 d samples were removed from the setting and prepared for top-view SEM analysis to assess tubule obstruction using the Olley score. Discs were then vertically cut and the section surface morphologically assessed using backscatter imaging. For both vertical and sectional surfaces EDX analysis was used to characterize the surface composition in the tubular and inter-tubular area.

Results

Group A showed clean tubular lumina at all time points. From day 2 onwards dentin showed exposed collagen fibers. Group 2 initially showed a complete surface coverage that flattened out during treatment without ever exposing tubules. At baseline, samples of Group C displayed a complete homogeneous coverage. From day 2 on tubules entrances with obstructed lumen became visible. While on day 4 and 12 the dentin surface exposed collagen fibers the lumina remained closed. EDX analysis of the vertical and horizontal views showed that P and Ca were predominant elements in both the inter- and tubular dentin while Si peaks were found in the tubule plugs.

Conclusion

While group B displayed a packed layer on the surface during the whole investigation time group C samples lost their superficial layer within 48 h. Tubule plugs containing considerable Si proportions indicated previous presence of DentinoCer, while high Ca and P proportions suggest obturation by dentin-like material.